Ultra thin sheet for electromagnetic interference(EMI) shielding purpose has been designed using base metal, PET & DST sheet stacking technology. Also, an automatic manufacturing system is developed. This ultra thin EMI shielding sheet is an effective shield against low frequency(~300kHz) EMI that can not shield completely by the existing EMI shielding sheet. And the developed automatic manufacturing system can stack ultra thin shielding sheet without any wrinkles.

청색 발광대역을 갖는 Polyfluorene Polymer(PFO) 베이스 Blue-OLED의 PFO Emitting layer에 YAG형광체를 분산시켜, Blue light와 Down-conversion 된 Yellow light를 얻고 이들의 보색혼합으로 백색광을 얻는 W-OLED 소자를 제작하였다. 소자의 기본구조는 5층의 적층구조를 가지며 cathode(Al)/YAG@PFO/TPD/TiOPc/Anode(ITO)의 단순한 구조로 기판유리를 제외하고 1000nm 이하의 두께로 제작이 가능한 초박막 구조의 W-OLED이다. YAG 형광체가 분산된 W-OLED의 전류밀도는 형광체가첨가되지 않은 경우에 비하여 약 2배 이상의 전류밀도증가를 나타내었다. 이는 첨가된 YAG 형광체의 표면전하에 기인한 것으로 생각된다. 전류밀도의 증가는 청색발광 휘도의 증가와 함께 down-conversion된 황색광이 증가하여 B+Y=White 보색 혼합된 백색광이 방출되었다. 적절한 동작을 위한 소자의 동작전압은 전류밀도 증가량의 변화율에서 주목할 만한 특이점이 나타나지 않는 전압범위인 15V-25V 구간으로 판단된다.

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films of functionalized polyimide. LB films of polyimide monolayer were deposited by the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with a three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) at various concentrations(0.5, 1.0, and 1.5 N) of NaClO4 solution. The current of reduction and oxidation range was measured from 1650 mV to -1350 mV, continuously. The scan rates were 50, 100 and 150 mV/s, respectively. As a result, monolayer and multilayer LB films of polyimide are appeared on irreversible process caused by the oxidation current from the cyclic voltammogram.

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with fatty acid (8A5H) and phospholipid (DLPE, DMPC, and DPPA). LB films of 8A5H monolayer and 8A5H-phospholipid mixture were deposited using the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured using cyclic voltammetry with three-electrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0 mol/L) of NaClO4 solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate was 50, 100, 150 and 200 mV/s, respectively. As a result, LB films of fatty acid and phospholipid (8A5H/DLPE and DPPA) appeared irreversible process were caused by only the reduction current from the cyclic voltammogram and LB film of 8A5H-DMPC mixture was found to be caused by a reversible oxidation-reduction process.

Langmuir-Blodgett(LB) technique can speak the best candidate of the future molecular electronic devices. But, precursor as molecular ultrathin film devices require the bulk property that are influenced by the molecular orientation. So, this device is one of current interest in molecular electronic device development of new materials. In this study, quantitative evaluation of molecular orientation in LB films of polyamic acid alkylamine salt was performed analysis experiment comparing the absorption or transmission intensity of the FT-IR spectrometer and reflection or absorption spectra with UV-visible absorption spectra. It could find that the polar angle(θ) of the dipole moment appears in about 68˚ and the tilting angle of the alkyl chain is about 11.5˚.

Ultra-thin films of amphiphillic squarylium dye were prepared on the hydrophillic substrate by Langmuir-Blodgett(LB) technique. In this study, the photoelectric properties of a amphiphillic squarylium dye LB film was investigated. The visible light(λ = 684nm ) of xenon lamp was illuminated on the amphiphillic squarylium dye LB films and light absorptivity and photoconductivity were observed. The photoconductivity was nearly constant regardless of nominal layer number. The photoelectric properties of the amphiphillic squarylium dye LB films with bottom electrode showed better than that top electrode.

Ultra-thin films of organic charge transfer complex were prepared on a hydrophilic substrate by Langmuir-Blodgett(LB) technique. In this study, the photoelectric properties of a LB film consisting of (N-docosyl quinolinium)-TCNQ(1:2) complex was investigated. The visible light(λ : 700 nm) of xenon lamp was illuminated on the LB films and light absorptivity and photoconductivity were observed. The photocurrent increased linearly and was saturated at the light intensity of 23 μW/cm2.

본 연구에서는 (N-docosyl quinolinium)-TCNQ (1:2) 착물의 LB초박막을 제작하였다. LB막의 누적을 위한 최적조건을 구하기 위하여 subphase 온도, barrier 압축속도 및 분산량을 변화시키면서 표면압-면적(π-A) 등온선 특성을 측정하였다. 그리고 전이비, UV-vis의 최대 흡광도, 정전용량 및 두께를 측정하여 LB막의 누적상태를 확인하였다. 그 결과 분자수준으로 잘 제어된 양호한 LB막이 제작되었음을 알 수 있었다..

TiC(001) 면위에 Mg 금속을 단원자층으로 증착시킨 후 산화 및 열처리 과정을 거쳐서 MgO 초박막을 성장시키고, 성장된 MgO 막의 전자상태 및 표면포논을 UPS, XPS 및 HREELS를 사용하여 측정하였다. 전도성 기판위에 epitaxial 산화물막을 성장시킨 후 성장된 막의 전자구조 및 표면포논을 측정함으로써 벌크에서 분리된 2차원적 특성을 갖는 '표면 모델'의 물성을 연구하고자 하였는데, 이러한 '표면모델'은 잘 배열된 원자구조를 얻을 수 있고 두께가 충분히 얇아서 전하축적을 피할 수 있기 때문이다. 기판으로는 MgO와 같은 암염형 결정구조를 갖고 있고, 격자상수 차이가 2.6% 로서 매우 작으며, 비저항이 매우 낮은 전이 금속 탄화물 중의 하나인 TiC(001) 면을 사용하였다. TiC(001)면에 증착된 MgO층의 UPS He-l 스펙트럼을 측정한 결과 O2p및 XPS스펙트럼은 열처리를 전후로 하여 변하지 않았으며, 이로부터 상온에서 산소의 확산만으로 MgO 상이 형성됨을 알 수 있었다. MgO초박막의 표면 포논을 HREELS를 사용하여 검출하였다. 거시적 포논중에서 F-K 파 및 Rayleigh 모드가 관찰되었는데, F-k파는 MgO막의 2차원성으로 인하여 벌크의 경우보다 높은 진동 에너지를 갖고 있었고 Rayleigh모드는 벌크 MgO와 유사한 분산관계를 보였다. 미시적 포논중에서 Wallis(S2)모드가 측정되었는데, 그 진동에너지는 벌크에서와 같고 off-specular방향에서도 소멸되지 않았다.

Ultra-thin films of hexyltriphenylphosphonium-TCNQ(1:1) complex were formed on various substrates by Langmuir-Blodgett technique, where hexyltriphenylphosphonium-TCNQ(1:1) complex was synthesized by attaching hexyltriphenylphosphonium group to TCNQ. The reaction product was identified with FT-IR, and UV-Vis absorption spectroscopies. The formation of ultra-thin films of hexyltriphenylphosphonium-TCNQ(1:1) complex was confirmed also by FT-IR, and UV/Vis absorption spectroscopies.

Ultra thin films of Tetra-3-hexadecylsulphamoylcopperphthalocyanine(HDSM-CuPc) were formed on various substrates by Langmuir-Blodgett method, where HDSM-CuPc was synthesized by attaching long-chain alkylamine(hexa-decylamine) to CuPc. The reaction product was identified with FT-IR, UV-visible absorption spectroscopies, elemental analysis and thin layer chromatography. The formation of Ultrathin Langmuir-Blodgett(LB) films of HDSM-CuPc was confirmed by FT-IR and UV-visible spectroscopies. A quartz piezoelectric crystal coated with LB films of HDSM-CuPc was examined as a gas sensor for N02 gas. HDSM-CuPc LB films were transferred to a quartz crystal microbalance(QCM) in the form of Z-type multilayers. Response characteristics of film-coated QCM to NO2 gas concentrations over a range of 100~600ppm have been tested with a thickness of 5~20 layers of HDSM-CuPc. Changes in frequency by adsorption of NO2 were increased With the number of LB layers and NO2 concentration, but the response time was slow.

Polyamic acid alkylamine (N, N-dimethylhexadecylamine)(PAAS)염을 합성하여 그 합성여부를 확인하였으며 PAAS염의 Langmuir막의 π-A 등온선 및 표면 전위 특성 등을 조사 하였다. Langmuir-Blodgett법에 의하여 PAAS염의 LB막을 여러종류의 기관에 누적하였으며 누적여부를 자외선 흡수 스펙트럼 및 적외선 투과 스펙트럼을 이용하여 조사하였다. 그리고 PAAS LB막을 열처리에 의하여 이미드(imide)화시켜 폴리이미드 LB막을 제조하였으며 그 이미드화 여부를 자외선 및 적외선 스펙트럼을 이용하여 조사하였다.

Ultra thin organic films, (3-docosyl benzimidazolium)-TCNQ(1:1)complex, were deposited onto ordinary microscope slide glass substrates with a Langmuir-Blodgett technique. II-A isotherms were studied to find optimum conditions of deposition by varying temperature. Anisotropic de electrical conductivities were measured at room temperature. They are about 5.21×10-12S/cm along the direction of film surface, and (2.73~4.40)×10-16S/cm in the vertical direction.