Following the implementation of the Act on the Prevention of Light Pollution Due to Artificial Lighting in 2013, local governments designated lighting environment management zones and conducted assessments of the impacts of light pollution on the environment to ensure compliance with acceptable light emission standards. In addition, according to the Act on the Prevention of Light Pollution Due to Artificial Lighting, local governments conduct and manage light pollution assessments every three years. However, measuring and analyzing during nighttime requires a significant amount of time and labor. Therefore, this research aims to improve the current light pollution environmental impact assessment method by utilizing aerial information from satellite data and establishing a database of light pollution assessment methods, thereby laying the foundation for light pollution management. In this study, a reference light source was installed on the ground, and the luminance measurements of the installed reference light source and the advertising light sources on-site were analyzed to derive brightness values for ground light sources using the optical band (R, G, B) values from aerial information derived from satellite images. The analysis produced predictive equations for light pollution from upward lighting and general advertising lighting. When these equations were applied to residential and commercial areas in the lighting environment management area, the results indicated that the predicted rooftop upward lighting prediction brightness exceeded the acceptable standard of light emission of 800 cd/m2 in residential areas, and the advertisement lighting prediction brightness exceeded the standard of 1,000 cd/m2 in commercial areas.
This study explores the introduction and applicability of the Species Protection Index (SPI) as a tool to evaluate the effectiveness of biodiversity conservation. Specifically, the SPI was recalculated for amphibians in Korea and compared with the internationally provided SPI results. The pilot evaluation of SPI for amphibians showed an increase from 41.52, based on international data, to 44.25, indicating that SPI calculations using domestic data can reflect conservation status more accurately than international SPI results. The findings suggest that SPI can serve as an important scientific basis for formulating national biodiversity conservation policies and managing protected areas, contributing to the development of more effective conservation strategies.
This study proposes a method to evaluate the publicity of real-time, demand-responsive, autonomous public-transportation systems. By analyzing real-time data collected based on publicity evaluation indicators suggested in previous research studies, this study seeks to establish a system that objectively assesses the publicity of public transportation. Thus, the introduction of autonomous public transportation systems is expected to contribute to solving problems in underserved transportation areas and enable more sophisticated public transportation operations. We reviewed evaluation indicators proposed in previous studies. Based on this review, publicity evaluation indicators were derived and specific criteria were selected to assess systematically the publicity of autonomous public transportation. An AHP analysis was conducted to assess the relative importance of each indicator by analyzing the importance of the selected indicators. Additionally, to score the indicators, minimum and maximum target values were established, and a method for assigning scores to each indicator was examined. The most important factor in the publicity evaluation of autonomous demand-responsive transport (DRT) was the “success rate of allocation to weak public transportation service areas,” with a significance level p of 0.204. This was analyzed as a key evaluation criterion because of the importance of service provision in areas with low-public-transportation accessibility. Subsequently, “Accessing distance to a virtual station” (p = 0.145) was evaluated as an important factor representing the convenience of the service. “Waiting time after allocation” (p = 0.134) also appeared as an important evaluation factor, as reducing waiting time considerably affected service quality. Conversely, “compliance rate of velocity” yielded the lowest significance (p = 0.017), as speed compliance was typically guaranteed owing to autonomous driving technology. This study proposed a specific evaluation method based on publicity indicators to provide a strategic direction for improving services and enhancing the publicity of autonomous DRT systems. These results can serve as a foundational resource for improving transportation services in underserved areas and for enhancing the overall quality of public transportation services. However, the study’s limitation was its inability to use real-time autonomous public transportation data, relying instead on I-MoD data from Incheon. This limitation constrained the ability to establish universal benchmarks because data from various municipalities were not included. Future research should collect and analyze data from diverse regions to establish more reliable evaluation indicators.
The fishing industry is globally recognized as a high-risk sector with substantial safety challenges. This study analyzes Norway's fishing vessel safety management legislation and risk management practices. The goal is to derive insights that can enhance South Korea's safety management for fishing vessels. Norway has established a culture of safety through regular inspections, mandatory safety training, the implementation of safety management systems, and active involvement of fishermen in risk assessments. These measures have significantly reduced maritime accidents. This study suggests incorporating effective elements of Norway’s safety management into the South Korean context, emphasizing a participatory approach that actively involves fishers.
Recently, high-rise residential buildings in Korea have adopted slender shear walls with irregular section shapes, such as T-shape, H-shape, and C-shape. In the seismic design of the slender shear walls, the transverse reinforcement for lateral confinement should be provided in the boundary elements to increase deformation capacity and subsequent ductility. However, in practice, the irregularity of the shear walls is not adequately considered, and the lateral confinement region is calculated for the rectangular wall segments. This study investigated the proper design method for lateral confinement regions using finite element analysis. The lateral confinement region was considered in analysis for two cases: 1) as a typical rectangular wall segment and 2) as an irregular wall. When the irregularity of the walls was considered, the compression zone depth was increased because the vertical reinforcement in the flange was addressed. The effect of lateral confinement design methods on the structural performance of the walls was directly compared under various design parameters, including the length of the flange, concrete compressive strength, vertical rebar layout, axial load ratio, and loading direction. According to the results of the parametric analysis, the peak strength and deformation capacity could be significantly increased when the lateral confinement region was calculated based on irregularly shaped walls, regardless of the design parameters. In addition, the effective compression zone was located within the lateral confinement region. Thus, it is recommended that the lateral confinement region of T-shaped walls is calculated by addressing the irregularity of the walls.
본 연구에서는 주민 체감형 수요자 중심의 녹지를 체감녹지(Public perception green spaces)로 정의하고 보다 실질적 으로 서비스권역 내 인구와 거주지에서 녹지까지의 접근성을 분석하였다. 이를 위하여 체감녹지를 산림녹지, 공원녹지, 시설녹지로 분류·선정하고, 통계 데이터의 최소기준인 집계구 단위를 조사구로 하여 QGIS를 사용하여 네트워크 분석 (Network Analysis)을 하였다. QGIS QNEAT3 알고리즘을 이용하여 체감녹지와 집계구 간 서비스권역 및 접근성 분석을 부산광역시 16개 구·군에 적용한 결과, 체감녹지로부터 도보 10분 내 서비스권역 인구비는 북구, 수영구, 기장군, 동래구 순서로 높은 비율을 나타냈고, 접근성 분석에서도 유사한 결과가 도출되었다. 본 연구는 기존의 녹지불평등 평가 방법을 보완하여 주민 체감형 수요자 중심의 녹지 현황을 파악하고, 향후 보다 적절한 곳에 공원과 녹지를 배치하 여 도시민의 녹지 이용 만족도를 높여줄 것으로 기대한다.
이 연구의 목적은 국내 대학의 유학생을 위한 한국어 관련 교과목의 강의 평가에서 평가 방법이 중국인 유학생의 평가 태도에 미치는 영향을 조사함으로써 평가의 문제점을 파악하고 이를 바탕으로 중국인 유학생 대상의 강의 평가 개선 방안을 제공하는 것이다. 이를 위해 현재 국내 대학에서 유학 중인 중국인 유학생을 대상으로 지면 설문조사를 실시한 후 그중 일부를 무작위 선정하여 면대면 개별 인터뷰를 진행하였다. 연 구 결과, 조사 방법에 따라 학습자의 강의평가 태도에 차이가 상당함을 확인하였다. 설문조사보다 인터뷰 방식으로 수집된 응답이 더 다양하고 구체적이며 응답 적극성도 높은 편이다. 향후 타당도 높은 강의 평가를 실시하기 위해서 학습자의 강의 평가에 대한 인식 개선, 강의 평가 능력 함양, 강의 평가의 실시 방식 다양화 등을 고려해야 할 것이다.
PURPOSES : This study was conducted to prevent slip accidents on manhole covers located on sidewalks and local roads as well as to propose reasonable slip resistance management standards for manhole covers. METHODS : Using field surveys, test groups were classified based on the patterns and wear amounts of the manhole covers. Standards for measuring the equipment and methods for slip resistance were established, and the slip resistance values were compared and analyzed for each manhole cover test group. RESULTS : According to the slip resistance test results, micro-protrusions on the non-slip manhole covers were found to be effective in improving slip resistance. However, in areas without microprotrusions, the improvement in slip resistance was minimal and yielded results similar to those of standard manhole covers. In addition, among the pattern types of standard manhole covers, the radial pattern was found to be the most susceptible to slipping. Under the current wear measurement standards, the change in slip resistance at different wear stages was found to be relatively small. Moreover, manhole covers had the lowest slip resistance among road surface structures, indicating the need to establish management standards for them. CONCLUSIONS : To prevent pedestrian slip accidents on sidewalks and local roads, it is necessary to ensure that the slip resistance standards of manhole covers are higher than those of sidewalks.
현재, 교통안전진단의 경우 차량 및 보행자의 교통사고를 미연에 방지하고 도로의 전체적인 안전을 도모하고자, 교통안전법 제34조 에 의거하여, 수행 조건에 부합한 경우 교통안전진단을 받도록 규정하고 있다. 교통안전진단의 경우 도로의 구분에 따라 다른 기준을 적용하고 있으며, 도로별 길이를 기준으로 수행 여부를 판단하고 있다. 교통안전진단의 경우 도로의 설계단계, 개시 전 단계 및 운영단계 등 3가지로 구분되어 수행되고 있으며, 각각의 단계별로 진단 수행 내용 및 범위가 조금씩 다르게 진행된다. 설계 단계에서의 교통안전진단의 경우, 해당 도로의 실시 설계 내용을 바탕으로 도로의 안전 을 판단하며, 개시 전 단계의 경우 도로의 신설 이후 운영 전 도로의 안전을 평가한다. 마지막으로 운영 단계의 교통안전진단의 경우 현재 운영 중인 도로에 대하여 도로의 안전을 평가하는 것이다. 본 연구에서는 진단단계별 교통안전진단 중 도로 설계단게에서 수행 시 발생될 수 있는 한계점을 파악하고, 이를 보완할 수 있는 방 안을 제시하여 그 효과를 분석하고자 한다. 또한, 국제 기준으로 운영되고 있는 iRAP(International Road Assessment Programme)의 SR4D( Star Rating for Design)을 통해 설계단계의 교통안전진단 수행 시 효과적이고 안전한 진단결과를 도출해내고자 한다.
Evaluating the performance of asphalt concrete using CT scanning has become an essential area of research due to its potential to revolutionize the way we assess road materials. Traditional methods often require destructive sampling, which can damage infrastructure and offer limited insight into the material's internal structure. In contrast, CT scanning provides a non-destructive, highly detailed analysis of asphalt's internal features, such as air voids, aggregate distribution, and binder coverage, all of which are critical to its durability and performance. Additionally, the ability to create 3D models from CT scans allows for deeper insights into factors like void connectivity and aggregate bonding, which directly affect the lifespan of pavements. By combining CT imaging with advanced data processing techniques, such as deep learning, this research offers more accurate and reliable methods for optimizing asphalt mix designs, ultimately leading to longer-lasting roads, reduced maintenance costs, and more sustainable construction practices.
PURPOSES : As evaluation methods for road paving materials become increasingly complex, there is a need for a method that combines computational science and informatics for new material development. This study aimed to develop a rational methodology for applying molecular dynamics and AI-based material development techniques to the development of additives for asphalt mixtures. METHODS : This study reviewed relevant literature to analyze various molecular models, evaluation methods, and metrics for asphalt binders. It examined the molecular structures and conditions required for calculations using molecular dynamics and evaluated methods for assessing the interactions between additives and asphalt binders, as well as properties such as the density, viscosity, and glass transition temperature. Key evaluation indicators included the concept and application of interaction energy, work of adhesion, cohesive energy density, solubility parameters, radial distribution function, energy barriers, elastic modulus, viscosity, and stress-strain curves. RESULTS : The study identified key factors and conditions for effectively evaluating the physical properties of asphalt binders and additives. It proposed selective application methods and ranges for the layer structure, temperature conditions, and evaluation metrics, considering the actual conditions in which asphalt binders were used. Additional elements and conditions considered in the literature may be further explored, considering the computational demands. CONCLUSIONS : This study devised a methodology for evaluating the physical properties of asphalt binders considering temperature and aging. It reviewed and selected useful indicators for assessing the interaction between asphalt binders, additives, and modified asphalt binders and aggregates under various environmental conditions. By applying the proposed methods and linking the results with informatics, the interaction between asphalt binders and additives could be efficiently evaluated, serving as a reliable method for new material development.
FRP 복합재료 중 CFRP(탄소 섬유 강화 플라스틱)는 현재 RC 구조물의 내부 및 외부 보강재로서 그리드 형태로 활용되고 있다. 그러나 CFRP 그리드에 대한 성능평가 기준은 매우 미흡하여 FRP 보강근 기준을 사용하고 있다. 따라서 본 연구에서는 그리드 가닥 수와 경계조건과 변수를 고려하여 CFRP 그리드의 인장 성능을 평가하기 위한 실험이 수행되었다. 가닥 수는 1, 2, 3가닥에 대한 인장시험이 수행되었으며, 경계조건의 경우 모르타르, 에폭시, 에폭시 + 모르타르로 변수를 지정하였다. 인장시험을 통하여 최적 가닥 수 및 최적 경계조건으로 개발한 시편을 토대로 고온 노출 시간에 따라 CFRP 그리드의 인장 성능 평가가 수행되었다. 온도는 130°C 로 유지되었으며, 5개의 시편을 각각 70분(Case 2), 100분(Case 3), 120분(Case 4), 150분(Case 5) 고온에 노출하여 비 고온 노출 시편 과 비교하였다. 실험 결과, 비 고온 노출 시편과 비교하여 Case 5에서는 인장강도와 탄성계수가 각각 최대 51.32% 및 44.4% 감소한 것으로 나타났다.
PURPOSES : This study aims to provide quantitative profile values for the objective evaluation of concrete surface profile (CSP) grades in concrete structures. The main aims are to quantify the CSP grade required for concrete surface pretreatment and proposing a more suitable CSP grade for structural maintenance. METHODS : Initially, the challenges in measuring concrete surface profiles were outlined by analyzing pretreatment work and profile samples of concrete pavements. Theoretical foundations for quantifying concrete surface roughness were established, and regression models including linear regression, cubic regression, and log regression were selected. Additionally, the interquartile range anomaly removal technique was employed to preprocess the data for regression modeling. RESULTS : Concrete CSP profiles were measured through indoor tests, and the measured data were quantified. Linear regression, cubic regression, and log regression models were applied to each CSP grade for comparative analysis of the results. Furthermore, comparative studies were conducted through adhesion strength tests based on the CSP grade. CONCLUSIONS : Our results are expected to establish objective standards for the pretreatment stage of concrete repair and reinforcement. The derived reference values can inform standards for the restoration and reinforcement of concrete structures, thereby contributing to performance improvement. Moreover, our results may serve as primary data for the repair and reinforcement of various concrete structures such as airports, bridges, highways, and buildings.
네오니코티노이드계 농약은 전세계적으로 사용되는 강력한 살충제이지만 환경, 생물에 잔류하 여 악영향을 미치고 있다. 이에 본 연구는 네오니코티노이드계 농약인 imidacloprid와 clothianidin이 공시 작물인 알팔파와 적용작물로 고추와 오이를 선정하여 토양처리 및 경엽처리에 따른 꿀벌 독성과 엽상 잔류 량을 비교하여 기존 엽상잔류독성시험법의 문제점을 확인하고자 하였다. Imidacloprid와 clothianidin을 작 물 또는 토양에 권장량 및 배수로 처리하고 시간에 따른 꿀벌의 치사율에 대한 RT25를 확인하고 잎의 잔류 농약을 HPLC로 측정하였다. 그 결과 경엽처리하였을 때 imidacloprid은 공시작물 RT25가 1일 이하, 잔류 량은 1.07 ~ 19.27 mg/kg이나 적용작물은 RT25가 9일 이하, 잔류량은 1.00 ~ 45.10 mg/kg 수준이었다. clothianidin은 공시작물 RT25가 10일 이하, 잔류량은 0.61 ~ 2.57 mg/kg이나 적용작물은 RT25가 28일 이 하, 잔류량은 0.13 ~ 2.85 mg/kg 수준이었다. 토양처리했을 때 imidacloprid와 clothianidin은 공시작물에 서는 꿀벌에 영향을 미치지 않았으며 잔류량은 0.05 ~ 0.37 mg/kg 수준이었으나, 적용작물에서는 imidacloprid은 RT25가 28일 이하였고 잔류량은 4.47 ~ 130.43 mg/kg 수준이었고, clothianidin은 RT25가 35일 이하였고, 잔류량은 5.96 ~ 42.32 mg/kg 수준이었다. 결론적으로 꿀벌 독성과 엽상 잔류량을 작물간 비교하였을 때 공시작물 보다 적용작물이 꿀벌의 치사율에 많은 영향을 미치고 잔류량도 높게 나타났고, 처리방법에 따라 비교하였을 때 적용작물에 대한 토양처리가 경엽처리에 비해 높은 RT25와 잔류량이 나타 났다. 따라서 농약안전성 확보를 위해 제시된 시험법이 실제 적용작물과 농약 처리방법에 따라 차이가 있 을 수 있어 imidacloprid와 clothianidin의 안전성 평가를 위하여 다양한 경로의 연구가 필요하다.
본 연구의 목적은 환자경험평가와 관련하여 그동안 주로 연구되었던 평가자 (입원경험 환자) 관점에서 벗어나 환자경험평가의 주서비스제공자인 간호사 관 점에서 시사점을 고찰하고, 코칭계가 환자경험평가 시행 이후 의료기관에서 강 화해야 할 코칭적 접근 방법에 대한 기초자료를 제시하여 의료기관 내 코칭문화 확산과 동시에 환자경험평가의 향상에 기여하려는 것이다. 목적을 달성하기 위 해 환자경험평가의 설문항목과 평가 결과를 분석하고 간호사 대상 코칭 관련 연 구를 분석하였다. 도출된 문제점은 간호사의 역할 비중이 과다하여 심리적 부담 감이 가중되고, 간호서비스 수준이 상향평준화 되어 있어 획기적인 점수 향상을 기대하기 어려우며, 대인적 측면에서 위로와 공감, 의사소통 부분 개선이 필요 하고, 제도와 시스템 등 구성원이 해결할 수 없는 장벽들로 인해 동기부여가 제 한적이라는 점 등이다. 이를 기반으로 간호사 코칭역량 강화, 경영진 및 관리자 코칭리더십 강화, 위로와 공감, 소통 등 대인관계 역량 강화 등의 코칭적 접근 방법을 제시하였다.
현상학 연구는 질적 연구방법 중에서도 현상의 이면을 밝혀 그 본질을 도출하는 방법론이다. 이런 본래 의 현상학적 연구의 취지를 살려 연구의 성격에 맞춰 현상의 본질을 드러낼 수 있는 다양한 현상학적 방법 론이 적용될 필요가 있다. 하지만 현상학적 방법론은 현실적으로 지오르지(Giorgi)와 반마넨(Van Manen) 의 방법론에 치우쳐 있는 실정이다. 이런 문제의식을 바탕으로 본 연구자는 청소년의 학교폭력 경험에 적용 한 현상학적 자기평가방법의 분석방법을 고찰했다. 이 방법론은 환원과정이 4단계로 구체적이어서 현상학 의 본래 취지인 본질에 도달하는데 적합하다고 생각한다. 구체적으로 학교폭력 피해학생의 심층인터뷰를 활용해 현상학적 자기평가방법의 환원과정을 이 연구에서 보여주었다. 이 현상학적 자기평가방법은 사회복 지학이나 사회학에서 다루는 현상의 본질을 파악하기에 적합한 연구방법이라 할 수 있다.
곧 다가올 미래에는 자율운항선박, 육상 원격제어센터에서 제어되는 선박, 그리고 항해사가 탑승하여 운항하는 선박이 함 께 공존하며 해상을 운항할 것이며, 이러한 상황이 도래했을 때 해상 교통 환경의 안전을 평가할 수 있는 방법이 필요할 것으로 사료 된다. 이에 본 연구에서는 자율운항기술을 사용하여 항해사가 직접 조종하는 선박과 자율운항선박이 공존하는 해상환경 하에서 선박 조종시뮬레이션을 통해 통항 안전성을 평가하기 위한 방안을 제시하였다. 자선은 6-자유도 운동 기반의 MMG 모델을 심층 강화학습 기법 중 하나인 PPO 알고리즘으로 학습하여 자율운항 기능을 갖출 수 있도록 설계하였다. 타선은 평가 대상 해역의 해상 교통 모델 링 자료로부터 선박이 생성되도록 하였고, 기 학습된 선박모델을 기반으로 자율운항 기능을 구현되도록 하였다. 그리고 해양기상 자 료 데이터베이스로부터 조위, 파랑, 조류, 바람에 대한 자료를 수집하여 수치 모델을 수립하고 이를 기반으로 해양기상 모델을 생성하 여 시뮬레이터 상에서 해양 기상이 재현되도록 설계하였다. 마지막으로 안전성 평가는 기존의 평가 방법을 그대로 유지하되, 선박조 종시뮬레이션에서 해상교통류 시뮬레이션을 통한 충돌 위험성 평가가 가능하도록 하는 시스템을 제안하였다.
High-Manganese (Mn) austenitic steel, with over 24 wt% Mn content, offers outstanding mechanical properties in cryogenic settings, making it a potential replacement for existing cryogenic materials. This high manganese steel exhibits high strength, ductility, and wear resistance, making it promising for applications like LNG tanks, flanges, and valves. To operate in cryogenic environments, hot forging and heat treatment processes are vital, especially in flange production. The cooling rate during high-temperature cooling after hot forging plays a critical role in influencing the microstructure and mechanical properties of high manganese steel. The rate at which cooling occurs during this process influences the size of the grains and the distribution of manganese and consequently has an impact on mechanical properties. This study assessed the microstructure and mechanical properties based on different cooling rates during the hot forging of High-Mn steel flanges. Comparing air and water cooling after hot forging, followed by heat treatment, revealed notable differences in grain size. These differences directly impacted mechanical properties such as tensile strength, hardness, and Charpy impact property. Understanding these effects is crucial for optimizing the performance and reliability of High-Mn steel in cryogenic applications.