알코올성 용제를 재활용할 수 있는 목적의 유기용제나노여과막(OSN)을 내용제성이 우수한 폴리벤지다졸 고분자를 이용하여 비용매 유도 상분리법을 이용하여 제조하였다. 제조한 나노여과막의 모폴로지와 투과특성을 조절하기 위하여 도프 용액의 농도와 물과 에탄올의 혼합용액인 응고액의 조성을 변화시키면서 제조하였다. α,α’-dibromo-p-xylene (DBX)을 이용하여 가교한 폴리벤지미다졸 분리막은 유기용제나노여과막으로 사용하기에 충분한 기계적 강도와 내용제성을 갖는 것을 확인하였다. 물로만 이루어진 응고조에서 도프용액의 농도가 20%이상인 분리막을 제조하는 경우에 분자량 696.66 g/mol을 가지는 콩고레드에 대한 제거율은 90% 이상을 나타내었고, 투과도는 5 bar의 압력에서 22.5 LMH/bar를 나타내었다. 응고액 조성에 대한 연구를 통해서 응고액 중의 에탄올 농도가 증가할수록 에탄올의 투과도가 증가하는 것을 확인하였다.

The objectives of this study were: (1) to identify differences in consumer attitudes and intentions to recycle fashion products using three types of recycling (including resale, reform, and donation), and (2) to examine the moderating effects of consumer prosocialness on the relationships between attitude and intention for each type of fashion product recycling. Men and women aged 20 years and over were recruited from a marketing research firm panel. Participants completed an online questionnaire incorporating measures for attitudes and intentions to resale, reform, and donate fashion products, prosocialness, frequency of purchasing fashion products, monthly amount of spending on fashion products, and demographic information. Data from 224 participants were analyzed using SPSS 25.0 and PROCESS macro. The results demonstrated that consumers had significantly different attitudes and intentions depending on type of fashion product recycling. Consumers had more positive attitudes toward donation compared to resale and reform types of recycling. Consumer intentions toward resale and donation were significantly higher than their intention to reform. Furthermore, this study confirmed that the attitude-intention gap in fashion product recycling can be explained by individual prosocialness. The moderating effects of prosocialness on the associations between attitude and intention to recycle were significant. The implications of increasing consumers’ behavior intention to recycle fashion products was discussed and future research suggestions are provided.

The following results were obtained after developing and conducting tests on items set up for evaluation of the cotton machine system development by self-test and requesting an external authorized testing agency to conduct the test. In technology development, the re-materialization of cotton fragments reduced manufacturing costs by 40%, and the recovery rate was over 95% as a result of the cotton loss test for the development of cotton machine systems. The Feed Roller Speed Control performance test resulted in a revolution of 5 rev per minute.

본 연구에서는 선박용 디젤 엔진에서 발생되는 크랭크케이스 수트(soot)의 재활용 가능성을 검토하기 위하여, 수트를 배기관에서 발생하는 수트와 크랭크케이스에서 발생한 수트로 분류하고, 열처리에 따른 수트의 구조적 특성을 분석하였다. 열처리는 아르곤 가스 분위기에서 2,000℃와 2,700℃로 열처리를 수행하였고, 샘플의 구조적 특성 분석을 위해 라만분광법(Raman spectroscopy)과 고분해능 전자현 미경(HRTEM)을 활용하였다. 또한, 취득한 HRTEM 이미지를 정량적으로 분석하기 위해 디지털 이미지 처리(Digital Image Processing) 기법을 활용하였다. 라만 분석 결과, 배기 수트와 2,700℃로 열처리한 수트에서 상대적으로 높은 G/D ratio가 나타났다. HRTEM 이미지에서는 두 수트 모두 유사한 형태의 흑연화된 나노 구조를 확인할 수 있었으나, 수트의 종류와 열처리 온도차에 따른 흑연화 정도의 차이를 정량 적으로 도출할 수 없는 한계가 있었다. 이에 Digital Image Processing을 통해 HRTEM 이미지의 fringe의 길이와 곡률을 정량적으로 분석하였으며, 라만 분석과 일치하는 결과를 도출할 수 있었다. 이는 배기 수트가 크랭크케이스 수트에 비해 더 흑연화 된 구조를 가지는 것을 의미하며, 더 높은 온도에서 열처리 할 경우 흑연의 구조로 더 잘 발달함을 의미한다. 본 연구의 결과로 크랭크케이스 수트 역시 배기 수트 와 마찬가지로 흑연계 재료로 재활용이 가능함을 확인하였다.

PURPOSES : The purpose of this study is to analyze the effect of ions in emulsion asphalt on recycling cold asphalt concrete and suggest the possibility of using anionic and nonionic emulsion asphalt. METHODS : In this study, indirect tensile strength, toughness, tensile strength ratio, and dynamic immersion tests were conducted to determine the effects of cation, anion, and non-ion emulsified asphalt on the cold recycled asphalt mixture. Crack resistance was evaluated through indirect tensile strength and toughness tests and the tensile strength ratio and dynamic immersion test were evaluated through tensile strength ratio and dynamic water immersion test. RESULTS : Indirect tensile strength and toughness measurement results demonstrated that the mixture using anion and non-ion emulsified asphalt tended to be higher than that using cation emulsified asphalt; this is due to the high content of reclaimed asphalt pavement with a cationic or ionic surface, which is related to the use of cation-emulsified asphalt in the mixture and has shown a low strength tendency. The tensile strength ratio measurement demonstrated that the mixture using non-ion emulsified asphalt tended to be approximately 15 % higher than that of the anion mixture. This demonstrated that the chemical additive used in the mixture showed a complete hydration reaction with the distribution to the mixture. The dynamic immersion test indicates that the aggregate film rate of asphalt is highly influenced by the surface electric charge of the new aggregate while the ionicity effect appears to be insignificant, at 75 - 85 %, when circular aggregates are used. CONCLUSIONS : High reclaimed asphalt pavement content in cold recycled asphalt mixture, as well as non-ion and anionic emulsified asphalt, is advantageous, reducing cracking and improving moisture resistance. It is believed that anions and non-ions may be better utilized than applying the existing criteria to the cold temperature recycled asphalt mixture with high reclaimed asphalt pavement content. In addition, if the scope of the emulsified asphalt is expanded, various additives can be used, which will require analysis of materials, such as fertilizers and additives.

In this study, the glass melting properties are evaluated to examine the possibility of using refused coal ore as replacement for ceramic materials. To fabricate the glass, refused coal ore with calcium carbonate and sodium carbonate in it (which are added as supplementary materials) is put into an alumina crucible, melted at 1,200 ~ 1,500℃ for 1 hr, and then annealed at 600℃ for 2 hrs. We fabricate a black colored glass. The properties of the glass are measured by XRD (X-ray diffractometry) and TG-DTA (thermogravimetry-differential thermal analysis). Glass samples manufactured at more than 1,300℃ with more than 60 % of refused coal ore are found by XRD to be non-crystalline in nature. In the case of the glass sample with 40 % of refused coal ore, from the sample melted at 1,200℃, a sodium aluminum phosphate peak, a disodium calcium silicate peak, and an unknown peak are observed. On the other hand, in the sample melted at 1,300℃, only the sodium aluminum phosphate peak and unknown peak are observed. And, peak changes that affect crystallization of the glass according to melting temperature are found. Therefore, it is concluded that glass with refused coal ore has good melting conditions at more than 1,200℃ and so can be applied to the construction field for materials such as glass tile, foamed glass panels, etc.

In this research, we evaluate on the disassemblability of recycling process for vehicle front door using the symbolic chart method and machine-learning algorithm. It is applied to the front door of 1600cc class vehicle, and then the conventional steel door and CFRP door were compared. Based on the principle symbolic chart method, the number of processes can be different according to decomposer proficiency of suitability of recycling process, so the evaluation method is required to supply this issue. The machine learning algorithm, and artificial intelligence method were applied and the applicable tools for each experiment were used to compensate the variations in the number of processes according to different proficiencies. Because CFRP front door has integrated components compare to steel door, so its disassemblability processes were decreased to 80 from 103 of the conventional steel door’s. It can be confirmed that the disassemblability was increased from the suitability of recycling equation. In case of the steel, disassemblability was approximately 60.6, in case of the CFRP is approximately 72 for car front door. Therefore, it can be concluded that the disassemblability of CFRP was better in the evaluation of suitability of recycling.

PURPOSES : The use of reclaimed aggregate has been recently increasing with the increase in the amount of waste asphalt concrete. The application of these materials can reduce the properties of the asphalt pavement when compared with the case when recycled aggregate is not used. The objective of this study is to evaluate the performance of the asphalt mixtures with various mix ratios of reclaimed aggregate. METHODS : To measure the performance, the following tests using the mixtures prepared in accordance with the Korea Standards were conducted: Hamburg wheel-tracking test, third-scale model mobile loading simulator test, and dynamic modulus test. RESULTS : The test results of the Hamburg wheel-tracking test indicate that the water resistance was similar in each mixture and the plastic deformation resistance was good in the high-ratio reclaimed aggregate mixture. In the case of the third-scale model mobile loading simulator test, the plastic deformation demonstrated a high resistance in the high-ratio reclaimed aggregate mixture. The results were similar to those of the Hamburg wheel-tracking test; however, the cracking resistance was poor with a high recycled aggregate incorporation ratio. The dynamic modulus test results demonstrated excellent resistance to plastic deformation at a relatively high ratio of reclaimed aggregate admixture. The crack resistance was weakened when a high ratio of reclaimed aggregate mixture was used. CONCLUSIONS: As the reclaimed aggregate content increased, the plastic deformation resistance increased and the crack resistance decreased.

PURPOSES : The purpose of this paper is to develop an evaluation method for aged reclaimed asphalt pavements using RAP mortar specimen and FTIR method. METHODS: To evaluate the low-temperature behavior of aged reclaimed asphalt pavements, an indirect tensile strength test was adopted with an RAP mortar specimen. The RAP mortar specimen without a rejuvenator was fabricated with two fine aggregate types as a function of passing sieve sizes. The fabricated RAP mortar specimen was frozen for 24 h at -20℃. The indirect tensile strength was measured as a function of different absolute viscosities. The indirect tensile strength and displacement were varied as functions of the dosage of the rejuvenator. The spectroscopy analysis of four asphalt binders was performed under attenuated total reflection. The four asphalt binders comprised of a virgin binder, two extracted RAP binders, and a mixed virgin and extracted RAP binder. To evaluate the oxidation of the binder, the carbonyl index was calculated. RESULTS : The four extracted RAP binders were measured with an extremely wide range of absolute viscosity from 30,000 poise to 170,000 poise. The indirect tensile strength of the RAP mortar decreased as the absolute viscosity increased. This means that at lower temperatures, the indirect tensile strength can indicate the oxidation of RAP. Also, the indirect tensile strength and displacement changed sensitively as the dosage of the rejuvenator was changed. Based on the FTIR principle, a good relation was observed between the dosage of the rejuvenator and the FTIR absorbance peak. It can be used to estimate the dosage of the rejuvenator in hot reclaimed asphalt mixture. Also, the carbonyl index of the RAP binder was calculated to evaluate asphalt oxidation using the FTIR principle. CONCLUSIONS : There is a good relation between the indirect tensile strength of RAP mortar and its absolute viscosity. This indicates that RAP mortar can be used to estimate the properties of aged RAP. Also, the usage of rejuvenator can be evaluated with both the indirect tensile strength and FTIR absorbance peak. The carbonyl index can be used to predict asphalt oxidation.

Wasted meat & bone has generated as byproducts in the slaughtering process of livestock and also faced with demands for its recycling and environmental protection. Many studies have been conducted to recycle byproducts and carried out mainly on the crushing of bones and the vacuum packing technology of products. In this study, the crushing unit, transporting unit, separated unit and packing unit have designed for development of the crushing and packing systems. Also, to confirm the performance of this system, the experimental verification were carried out the working noise and packing weight.