목적 : 멀티포컬 콘택트렌즈(MFCL) 착용 시 시각 피질에서 발생하는 ERP 변화를 확인하기 위하여 단초점 콘택트렌즈 착용 시 나타나는 ERP 변화와 비교하였다. 방법 : 안질환이 없는 근시안 20명 (여성 15명, 남성 5명, 평균 연령 24.00±0.51세)을 대상으로 하였으며, 단안 시력 0.00 logMAR 이하, -0.75 D 이상의 난시안, 0.50 D 이상의 부등시안, 조절력이 비정상적이거나 시력교정술을 받은 경우는 제외하였다. 단초점 콘택트렌즈(SVCL)와 낮은 가입도 중심부-근용 멀티포컬 콘택트렌즈를착용시킨 후 NeuroScan SynAmps 2 프로그램을 이용하여 시피질에서 일어나는 시각반응을 ERP로 기록하였다. P100 분석은 O1, O2 채널을 사용하고, N170 분석은 P7, PO7, P8 및 PO8 채널을 사용하였다. MFCL 착용 후 나타난 P100과 N170의 활성도(amplitude)와 반응시간(latency)은 SVCL 착용 후 나타난 값과 비교하였다. 결과 : MFCL 착용 시 단안과 양안에서의 P100 활성도는 SVCL 착용 시와 차이가 없었으나 P100 반응시간은 우세안에서 SVCL 착용 상태보다 길었다(p=0.036). MFCL 착용 시 우세안의 N170 활성도는 비우세안보다 작았고(p=0.001), 비우세안은 단초점 콘택트렌즈 착용 시보다 작았다(p=0.008). 그러나 양안에서 N170 활성도와 반응시간은 SVCL 착용 상태와 차이를 보이지 않았다(p=0.200), (p=0.249). 결론 : MFCL 착용 후 초기시각반응과 인식과정은 우세안에서는 저하되었지만, 양안 상태에서는 SVCL 착용시와 차이가 없었다. 따라서 MFCL 착용 후 나타나는 망막에 맺힌 흐린 상은 양안 융합과정에서 극복되어 시기능에 영향을 주지 않는 것으로 사료된다.

목적: 부등시안과 모노비전 상태의 중간거리 시각 인식 반응을 이해하고자 시각피질에서 발생하는 event related potentials (ERP) 변화를 확인하였다. 방법 : 15명의 젊은 성인(23.00±1.60세)을 대상으로 하였으며, 단안 시력 0.00 logMAR 이하, -2.00 D 미만의 근시안, -0.75 D 이상의 난시안, 0.50 D 이상의 부등시안, 조절력이 비정상적인자, 시력교정술을 받은 자는 제외하였다. 유발 부등시는 비우세안에 굴절교정도수에 +1.00 D, +2.00 D를 가입한 콘택트렌즈로 유발시켰다. 자극은 모니터에 무표정과 슬픈 표정의 얼굴 자극을 제시한 후 NeuroScan SynAmps 2 프로그램을 사용하여 ERP를 기록하였고 초기 시각반응과 관련 있는 P100과 인식 반응과 관련 있는 N170의 amplitude와 latency 값을 추출하여 비교하였다. 결과 : 단안 상태에서는 초기 시각반응에 속하는 P100 amplitude는 1.00과 2.00 D의 유발 부등시안에서 우세안보다 더 강하게 나타났고(p=0.030, p=0.020), 얼굴 자극을 인식하는 N170 amplitudes는 1.00과 2.00 D 유발부등시안에서 우세안보다 낮게 나타났다(p=0.010, p=0.040). 양안 상태에서 1.000과 2.00 D 유발부등시안의 N170 amplitude는 동등비정시안(isometropia)보다 작았고 (p=0.010) 자극을 처리하는 시간에 해당하는 N170 latency는 길었다(p=0.010). 결론 : 유발부등시 비우세안에서는 우세안보다 초기시각 반응이 더 강하게 나타나고, 인식에 필요한 시간은 길었다. 양안 상태에서 유발부등시는 동등비정시와 비교하여 초기 시자극은 차이가 없지만 인식과정에서 자극이 약하고 인식에 필요한 시간은 더 긴 것으로 나타났다. 본 연구는 부등시안의 시각인식 반응에 대한 정보를 제공하고, 모노비전의 시각인지 과정을 이해하는데 도움을 줄 것으로 기대한다.

Recently domestic manufacturing companies have been experiencing worsening profitability and stunted growth due to the long-term economic recession and the rapid rise of developing countries such as China and Southeast Asia. These difficulties force many companies to concentrate their core competencies on new value creation and innovation in order to gain momentum for new growth. Enterprise Resource Planning (ERP) has been considered as one of viable solutions. Among the various modules in ERP, shop floor control function in the production management module is rather limited. In order to overcome this problem, Manufacturing Execution System (MES) has been used as a subsystem which has a strong information gathering power and flexibility. Both systems interact closely with each other. In particular, ERP requires fast, accurate shop floor information at MES. This paper describes how to synchronize relevant information between ERP and MES with theory of constraints (TOC). The processing time information transmitted from the MES workplace is received at the ERP workplace. In the process, the received processing time is causing information distortion in ERP, when the information gathering standard of MES is different from the ERP information interpretation standard. The Drum-Buffer-Rope theory of TOC was applied to resolve this problem, therefore, information synchronization between both systems was made. As a precondition, the standard time of the upper ERP system was rearranged according to the capacity constraints resource. As a result, standard time restructuring has affected changes in labor costs. Standard labor costs have come close to actual ones, and information synchronization of MES transmission data has improved the reliability of standard product costs, such that it enabled various company-wide restructuring actions to be much more effective.

본 논문은 2016년 하계 학술대회 발표 자료로서, 중견 기업에서의 ERP 시스템 구축 시 사전 설계 활동으로서의 PI컨설팅을 포함한 ERP 구축과 PI 활동 없이 ERP가 구축된 ERP 서비스에 대하여 두 집단간의 서비스 품질을 분석하고 비교하고자 한다. 이를 위하여 일반적인 오프라인에서의 서비스 품질 평가 모형인 SERVQUAL 모형과 IT 환경에서 서비스 품질을 분석하는 E-S-QUAL 모형 등의 다양한 연구모형을 참조하여 서비스 품질 모형(Service Quality Model)을 제시하여 두 집단에 적용하여 분석한다. 연구모형의 분석을 통해 PI 수행 여부에 따라 두 집단에 구축된 ERP 서비스 품질척도에 영향을 미치는 품질 결정 요인들을 식별하여 주요한 품질 결정 요인의 개선을 통한 ERP 서비스의 품질을 개선하고자 한다. 이러한 연구 과정을 통해 각 연구 모형과 요인들 간에 미치는 영향에 대한 결과를 분석하며, 분석 결과를 통하여 서비스 품질의 개선을 위한 경영적 시사점을 도출하고자 하는 목적으로 작성되었다.

The quality of service in ERP services is a key issue in innovating the ERP performance as an IT service for corporations. Currently, most of the research works for this area are based on the existing quality models such as SERVQUAL, which are said not to measure service quality properly. Also, it does not consider the factor of the system acceptance, which is thought to be closely related to the quality of service in this type of IT services. Therefore, a research model is required, which can address the issues related to the ERP service quality measurements. In this paper, new research models have been proposed, and empirical data obtained from SME’s ERP users have been applied to the proposed model to analyze the causal relationship between quality factors and to identify the most suitable quality measures. Also, the relationship between the service quality and the system acceptance was analyzed using a combined model. The results show that factors such as productivity and convenience affects the quality mostly and that the most appropriate measure for the service quality of ERP service is satisfaction. Also, for the system acceptance, the ease-of-use is the main factor. And, the service quality and system acceptance shows a strong correlation. This means that, in order to enhance the quality of ERP services, the service provider needs to provide customers with productivity-enhanced user-friendly IT services and active product support. The work of this research can help to improve the service quality and the user acceptance of ERP services and to lead further research works in this area.

Purpose : This study is to investigate that influence of dominant eye on the neural mechanisms involved in visual inputs system using ERPs which are neural signals that reflect neural activity. Methods : Twenty three normal controls adults with right dominant eye and twenty normal controls adults with left dominant eye participated in this experiment. In initial screening, we had neuropsychological test with BAI and BDI-2. All participants had normal or corrected visual acuity 20/20. Edinburgh Handedness Inventory was carried out to select right-handed. To identify dominant eye, the hole-in- card test was executed repeatedly three times. To assess whether influence of dominant eye on the neural mechanisms involved in visual inputs system, event-related potentials (ERPs) were recorded with electroencephalography. Performance measure was the reaction time (RT). The ERPs in response to dominant eye in respect of visual field were investigated in three regions: the temporal-occipital, the occipital and the parietal regions. Especially, the P100 amplitude in occipital region, N170 amplitude in temporal-occipital region and the P300 amplitude in parietal region were explored. Results : A significant difference in RT was observed between the RVF and LVF, which the RVF exhibited shorter RT than the LVF with right hand in left dominant eye (t=-5.47, p<0.001). P100 latency showed that the RVF had shorter latency than the LVF with right hand in right dominant eye (p<0.001). N170 amplitude revealed that the RVF had larger amplitude than the LVF with right hand in right dominant eye (p<0.001). N170 latency revealed that the RVF had shorter latency than the LVF with right hand in right dominant eye (p<0.001). P300 amplitude and latency were no main effect for dominant eye. Conslusions : This present study has attempted to establish the influence of dominant eye on the neural mechanisms involved in visual inputs system. The conclusion which can be drawn from this study are that visual stimuli incoming from the RVF or LVF are differently recognized depends upon each dominant eye. That is, while the participants with right dominant eye responded more actively on stimuli coming from LVF than RVF when they conducted the experiment with their left hand, the participants with left dominant eye responded more actively on stimuli coming from RVF than LVF when they conducted the experiment with their right hand.

The aim of the present research is to explore the neural features of intertemporal choice. Intertemporal choice concerns the phenomenon of temporal discounting which demonstrates consumers’ tendency to devalue a future reward as the receipt of money reward is delayed further distantly into the future. It is also called the ‘present bias,’ a special kind of attachment consumers place to immediate a cash reward which consumers are willing to take even at a discount, instead of saving it for the future. The urge to choose an immediate reward at some discounting rates, i.e., temporal impulsivity, is deeply embedded in our instinct. On the other hand, the choice for a delayed option is made as a result of effortful and deliberate cognitive control, by suppressing the urge for instant gratification and shifting focus to the long-term gain. Neuroscience researchers have found the prefrontal cortex as a key brain region behind deliberate and analytic decision-making such as reward delay. The experimental paradigm used in this study adopted from Kirby, Petry, & Bickel (1999). There were ten intertemporal investment choices representing six different levels of discounting rates. Participants (N=21) were given the two investment options, as “take it now” and a “save for later” options, and they were asked to indicate a preferred option. The brain waves were recorded using a 32 channel EEG system. We conducted noise control by using Independent Component Analysis (ICA) in EEGLAB and analyzed the Event-Related Potentials (ERP) particularly focusing on the phase when each participant was examining the future-oriented “save for later” option. The behavioral responses were divided into two groups, one in which the present option was selected and the other in which a future-oriented “save it for later” option was selected. Custom-written Matlab codes were used to compare the differences in ERPs between the two choice responses. A greater positive component of P3 after 300 milliseconds at the onset of the future option was observed in the fronto-parietal regions when the “save it for later” options were chosen compared to when the “take it now” choices were made. Hence, during intertemporal choice, the fronto-parietal regions are likely to play a key role in enabling the long-term perspective and consequently, precipitate the choice of a future-oriented deal. The P3 signal across the fronto-parietal regions may potentially be a proximal indicator of a future-oriented choice during intertemporal financial decision-making.

기부 광고가 기부의향을 효과적으로 촉진시키기 위해서는 목표 청중이 동정심, 공감이나 심리적 불편감 등의 정서를 느끼도록 하는 전략이 필요한 것으로 알려졌다. 선행연구들은 기부 광고에 의해서 유발되는 정서적 경험에 영향을 미칠 수 있는 요인으로 광고의 언어적 요소인 메시지의 속성(구체성과 정서가)과 그에 따른 심리적 반응(심상 유발과 주의 집중)을 제안한다. 기부 광고를 처리하는 심리적 기제를 이해하기 위해서, 본 연구는 선행 연구들을 근거로 ‘기부 광고의 메시지 속성 (메시지의 구체성과 정서가) → 심상 유발과 주의 집중 → 정서적 경 험 → 기부의향’의 개념적 모형을 제안하였다. 이와 같은 개념적 모형 중 본 연구는 메시지의 구체성과 정서가가 (1) 심상 유발과 주의 집중에 미치는 영향을 ERP로 측정하고, (2) 기부의향에 미치는 영향을 기부의향금액을 측정하여 실증적으로 검증하고자 했다. 그 결과, 구체적인 메시지는 추상적인 메시지에 비해서 심상을 더 유발시키며, 부정적인 메시지는 긍정적인 메시지에 비해서 더 많은 주의를 불러일으키는 것으로 밝혀졌다. 또한 메시지가 구체적이면서 부정적일 경우, 기부희망금액이 가장 높은 것으로 나타났다.

본 연구에서는 코히어런스 분석을 통하여 시각집중 기간 동안 시간 변화에 대한 뇌기능과 관련된 공간-주 파수간 연관관계를 해석하였다. 집중관련 시각자극 실험 데이터를 통해 θ 와 α 대역에서 서로 다른 두피 위치 간 위상연관변화를 확인하였다. 좌우 전두엽, 전두엽과 두정엽 간 뇌유발전위는 P100, N200지점에서 위상동조를 보였으며, 전두엽과 후두엽 간 뇌유발전위는 시각 처리 정보가 반영되는 P300지점에서 위상동조를 보였다. 고정된 길이의 창을 이용하는 단구간 푸리에 변환에 비하여 연속 웨이블릿 변환은 모 웨이블릿의 파라미터 조정을 통한 다중해상도 분석이 가능하였다. 따라서 연속 웨이블릿 변환을 이용한 코히어런스 결과가 시간 변화에 대한 뇌유발전위의 공간-주파수간 연관관계의 변화를 확인하는데 유효함을 확인하였다. 비 집중 자극수행에 대해서는 위상동조 현상이 나타나지 않았다.

P300-기반 숨긴정보검사(P300 CIT)에서, 조사대상자에게 관련자극이 가치가 있는 정도는 검사결과에 큰 영향을 미친다. 관련자극의 가치가 낮을 경우, P300 CIT의 정확판단율은 낮아진다. 본 연구의 목적은 관련자극의 가치가 낮은 경우, 동공-기반 숨긴정보검사(Pupil CIT)가 P300 CIT를 보완하는 검사로 사용될 수 있는지를 파악하는 것이다. 25명의 실험참여자에게 5장(스페이드 2, 3, 4, 5, 6)의 카드 중 한 장을 뽑도록 한 다음, 실험참여자가 뽑은 카드를 숨기정보로 사용한 P300 CIT와 Pupil CIT를 실시하였다. P300은 Fz와 Cz, Pz에서 측정하였으며, 동공크기는 양쪽 눈에서 모두 측정하였다. P300 CIT에서, Fz와 Cz, Pz에서 측정한 관련자극의 P300 진폭은 무관련자극의 P300 진폭보다 통계적으로 유의하게 더 컸다. Pupil CIT에서, 왼쪽 눈과 오른쪽 눈의 동공크기는 무관련자극이 제시되었을 때보다 관련자극이 제시되었을 때 더 컸다. P300 CIT의 정확판단율은 Fz와 Cz에서 44%였으며, Pz에서 36%였다. Pupil CIT의 정확판단율은 왼쪽 눈의 동공크기를 이용한 경우 52%였으며, 오른쪽눈의 동공크기를 이용한 경우 60%였다. 전체 사례수가 크지 않아 통계적으로 유의하지는 않았지만, Pupil CIT의 정확판단율이 P300 CIT의 정확판단율보다 높은 경향이 있었다. P300 CIT의 판단과 Pupil CIT의 판단 간의 상관관계는 통계적으로 유의하지 않았다. 결과적으로, 조사대상자에게 관련자극의 가치가 높지 않을 경우에는 P300 CIT 보다는 Pupil CIT를 사용하는 것이 더 좋을 것이다. 그리고 두 가지 검사방식을 결합한다면, 더욱 높은 정확도를 가진 숨긴정보검사를 구성할 수 있을 것이다.

최근 국내 해양레저산업은 정부 및 지방자치 단체의 지원과 소득증대에 따른 해양레저 수요가 크게 증가하고 있고 세계 1위의 조선 강국으로서 관련 산업 인프라를 구축하고 있지만 해양레저산업은 선진국에 비해 기술 및 관련 산업이 부족한 실정이다. 이런 관심이 크게 증가하면서 여러 가지 관련 설계 기술개발 및 관련 규정을 재정비하고 있다. 쌍동선 구조설계와 구조해석 평가에 대한 일련의 과정에 있어서 복합 재료를 고려한 구조설계 및 구조강도 평가에 대한

The medium and small logistic companies that have an outsourcing contract from the large corporation are encountered with a problem to introduce the ERP system to their current business environment due to following risk of change in current business environment, high cost involved in investment, and lack of understanding of business requirement of ERP. Instead of build their own ERP system, the small and medium logistic companies are using the large corporation's ERP system and get the benefit of efficiency in management and control process. Therefore, it is more like the organization hierarchy, not collaboration between the medium and small companies with the large corporation. In this study, the survey method to find out how the medium and small logistic companies understand the importance of ERP system on continuous growth of business by AHP. as result, they are recognized. The benefit of the ERP system as having much effect on business competitiveness.

To help the corporations ensure more efficient production management, the Enterprise Resource Planning (ERP) system has been introduced in operation, together with a variety of approaches to make improvements in terms of quality and productivity issues. Yet, with the different types of ERP systems in operation, many companies are going through many difficulties not only in having greatly reduced work efficiency but also in making prompt decisions from the entire group-based integrated information. In this study, the analysis was made on their own ERP systems and working processes operated by a company running the multiple number of productions from the domestic and the overseas suppliers, in order to support their interacted work flow regarding their products and help improve the work efficiency by establishing standardized ERP system. Through this, it is expected to ensure more competitive system in operation by securing the flexibility in the production as well as efficient resource distribution under the corporate context of cost reduction and quality improvement.

It seems that a primary concern of the project-based company, which provides a large scale product or service over long term period, is to run a successful project through systematic project process control and control costs. One of the typical project control methods is Earned Value Management System(EVMS) which analyses the precess through performance measurement. Even though the EVMS is a highly efficient tool in the managerial aspect, it cannot easily determine the Planned Value(PV), Actual Cost(AC), or Earned Value(EV) due to the indistinct criteria and extensive data. The accurate calculation of AC in particular, is the basic of project management, but most companies record direct personnel expenses or direct expenses only. Since they calculate indirect expenses based on the estimated ratio, it limits the systematic project management that reflects changes in profit and loss of a company. This study introduces a EVMS for project management and its actual case based on EVMS and ERP system which some additional modules are installed for performance measurement. It is expected that this new method enables a company to save time and effort, and also to improve transparency by specifying expense items in detail and to switch quarterly settlement to monthly by reducing the time of calculation.

Today, many companies have introduced an ERP system - an enterprise resources planning - in order to improve corporate credibility through transparent management and for quick responses to market situations through quick decision making. After the construction of an ERP system, many companies are having difficulty in calculating the appropriate number of personnel required for running the system because of a lack of standard for doing so, as well as a lack of pertinent procedures. As a result, the companies are having to resort to a trial-and-error approach. Therefore this paper studied a model for calculating the appropriate number of personnel required for efficiently running an ERP system after its construction, as well as for constantly meeting its performance targets. The developed model was applied empirically to calculate an appropriate number of personnel required, and an organization was set up according to this. Therefore, the purpose of this study was to present an optimized model for calculating the number of personnel required for operating an ERP system, that which addresses problems of existing models, in order to help companies organize the operation personnel and its size, as well as to provide more objectivity to the calculated number of personnel required and to improve credibility.

The company protects the information of legacy system to satisfy all member in company. Integrating between applications is increasing recently because of e-Business activation. The e-Business activation also make between extra companies and intra companies integrated. This paper suggest on implementing the ERP using Phased Approach Method and the EAI(Enterprise Application Integration) with legacy system. This paper also suggest the standard method which would be used in implementing the EAI in another company and reduce the mistake during the EAI project. Therefore, it would be the one system between complicated systems through application integration, it would be also make shop floors visualized. This research would help users and service suppliers getting more advantages of e-Business system.

ERP system has been spreaded from large companies to many small and medium sized companies, and it is recognized as a basic system for optimum and efficient work process. The focus is moving from manufacturing companies to various specialized companies. Once ERP system was introduced to those specialized companies, there was attempt to customize an ordinary system which used in manufacturing companies, but it was hard to take effect due to the lack of experience and an inadequate analysis of work process. Some of foreign ERP packages are possible to be constructed for some companies. However, they are originally aim at a large enterprise and it is also very difficult to construct and maintain. For this reason, small and midium sized companies are having a difficulty to construct ERP system. This study deals with the construction of ERP system for small and medium sized design engineering company and introduction of the crucial points throughout the construction and requirements for composition module and customization of each main module. Based on the findings of this study, the specialized non-manufacturing companies are expected to have efficient and practical application of ERP system when they select and customize the ERP package of manufacturing companies.