Accurate and rapid detection of antibiotics is critical for protecting human health and the environment. To this end, we report a novel electrochemical sensor for the simultaneous detection of Levofloxacin (LFX) and Tryptophan (TRP) in dairy samples. Outstanding electrocatalytic activity for the oxidation of LFX and TRP is exhibited by the Activated Nanodiamond (AND) and Ti3AlC2 max phase ( Ti3AlC2max) nanocomposite-modified glassy carbon electrode ( Ti3AlC2max AND/GCE) featured in our sensor. High selectivity and sensitivity are achieved by the sensor, with limits of detection (LOD) of 20.47 nM and 0.309 μM for LFX and TRP, respectively. Moreover, strong anti-parasite capacity is demonstrated by the developed sensor, making it an excellent candidate for the establishment of a reliable sensing platform for antibiotic detection. Findings suggest that this novel sensor could serve as a valuable tool for monitoring the content of LFX and TRP in dairy samples and enhancing the safety of these products.

This paper presents an electrochemical immunosensor using a graphene/multi-walled carbon nanotube (MWCNT) composite platform for detecting the cardiovascular marker C-reactive protein (CRP). The immunosensor exhibited a linear detection range of 0.20–100 ng/mL CRP with a low limit of detection reaching 0.081 ng/mL. The composite material provided a 3D porous structure that allowed efficient antibody immobilization and minimized steric hindrance. The sensor showed high specificity, with minimal response to interfering substances. Using differential pulse voltammetry, the immunosensor demonstrated exceptional precision, rapid detection, and a direct correlation between CRP concentration and sensor response current. Overall, this work highlights the potential of the graphene/MWCNT composite platform as a robust tool for early CRP detection and cardiovascular disease risk assessment. The immunosensor provides sensitive and selective CRP quantification that could enable timely clinical intervention for at-risk individuals.

This study reports the synthesis of a novel graphene/chitosan/β-cyclodextrin composite material (GO/CS/β-CD) via a onestep chemical reduction method, which combines the advantages of graphene, chitosan, and β-cyclodextrin. The morphology and structure of the composite were characterized using various techniques, such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy. Subsequently, sortase A (SA) was immobilized onto the GO/CS/β-CD for the detection of Staphylococcus aureus. The sensor exhibited a good linear relationship within the concentration range of 30–300 CFU/mL, with a detection limit of 12 CFU/mL. The GO/CS/β-CD composite material showed enhanced properties due to the synergistic effect of graphene, chitosan, and β-cyclodextrin. The immobilization of sortase A onto the composite material improved the sensitivity and selectivity of the sensor for the detection of S. aureus. This study presents a novel graphene/chitosan/β-cyclodextrin composite material with immobilized sortase A, demonstrating enhanced sensitivity and selectivity for the detection of Staphylococcus aureus, which has potential for the development of high-performance sensors in various fields.

In this paper, a simple, cost-effective, and efficient electrochemical sensor for molecular imprinting melatonin was established. The molecular imprinted films were formed by in situ electrochemical polymerization using molecular imprinting technology. The modification method, modification time and other parameters of the electrode were optimized. Under optimized conditions, the sensor responds to melatonin concentration in a linear range of 0–100 μM. The detection limit was 0.171 μM. In addition, the sensor has little response to interfering substances, such as uric acid, vitamin B6, vitamin C, and glucose, and can be tested in real samples. The recoveries were 98.73–101.60%.

Black phosphorus (BP) is incorporated in the electrochemical detection of uric acid (UA) to form few layers of BP nanosheets (BPNS)-modified glassy carbon electrodes (BPNS/GCE), investigated by means of ultrasound-assisted liquid-phase exfoliation. We find a significant increase in the peak current magnitude and positive potential shift in the electrochemical response of BPNS/GCE, which may be attributed to the larger specific surface area and good charge transfer ability of BPNS. Further, the electrochemical response of BPNS/GCE is evaluated under different conditions to achieve the optimal conditions. UA detection using differential pulse voltammetry (DPV) shows linear response within the range of 1–1000 μM with a detection limit of 0.33 μM. This work reveals new applications of BP nanomaterials in the electrochemical sensing, thereby promoting further advancement in terms of practical applications of two-dimensional nanomaterials.

In this research, reduced graphene oxide/polypyrrole (rGO/PPy) particles were synthesized and used to measure the amount of dopamine (DA) electrochemically. The obtained rGO/PPy particle was characterized by Fourier Transform Infrared Spectrophotometer (FTIR), UV–Visible Spectrophotometer (UV–Vis), and X-Ray Diffraction Diffractometry (XRD). To investigate the DA sensor performance, cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to acquire electrochemical measurements of the sensor. Current values of 1.65 and 5.9 mA were observed in the CV at 0.2 mM and 1.2 mM concentrations of target molecule, respectively. Under optimized conditions, the linear calibration plots were found to exhibit significant sensitivity in the linear range of 0.2 and 1.2 mM, with a corresponding detection limit of 0.061 μM for DA. The results obtained were similar to the sensor results of DA made using precious metals. This work was a demonstration of the feasibility of high-sensitivity electrochemical analysis with conductive carbon materials without the use of precious metals. It was also observed that the cost-effective rGO/PPy exhibited a very high potential for DA detection.

MicroRNAs (miRNAs) are emerging materials as ideal biomarkers for noninvasive cancer detection in the early phase. In this article, a simple and label-free electrochemical miRNA biosensor was developed. A single-stranded DNA (ss-DNA) probes were successfully mapped to f-MWCNT and hybridized with the target miR-141 sequence. The optimum peak points of the obtained hybridization were determined using Cyclic Voltammetry (CV) and Differential Pulse Voltammetry (DPV) methods. Significant peaks were observed in the results, depending on miR-141 at different concentrations. The linear relationship (ν) between redox peak currents (Ip) and scanning rate indicated that electron transfer (ET) between miR-141 and the electrode surface was accomplished successfully. In DPV measurements, miR-141 was measured with a low detection limit (LOD) in the 1.3–12 nM concentration range, and the LOD and limit of quantification (LOQ) results were found to be 3 and 9.1 pM, respectively. Besides, selectivity test was investigated for the biosensor using different target analytes and a significant difference in value was observed between the peak currents of miR-141, and other target molecules. This developed strategy has been found to detect miR-141 sensitively, selectively and without tags, and its integration into mobile devices has been successfully carried out.

In this work, norepinephrine (NE) was determined by an electrochemical sensor represented by a carbon paste electrode boosted using nitrogen-doped porous carbon (NDPC) derived from Spirulina Platensis microalga anchored CoFe2O4@ NiO and 1-Ethyl-3-methylimidazolium acetate (EMIM Ac) ionic liquid. The morphological characteristics of the catalyst were recorded by field emission scanning electron microscope (FE-SEM) images. Moreover, the electrochemical behavior of norepinephrine on the fabricated electrode was checked using various voltammetric methods. All tests were done at pH 7.0 as the optimized condition in phosphate buffer solution. The results from linear sweep voltammetry revealed that the electro-oxidation of norepinephrine was diffusion, and the diffusion coefficient value was obtained by chronoamperometry (D⁓6.195 × 10– 4). The linear concentration of the modified electrode was obtained from 10 to 500 μM with a limit of detection of 2.26 μM using the square wave voltammetry (SWV) method. The sensor selectivity was investigated using various species, and the results from stability and reproducibility tests showed acceptable values. The sensor's efficiency was tested in urine and pharmaceutical as real samples with recovery percentages between 97.1% and 102.82%.

This work describes Ni–Ce–Cu metallic–organic framework (MOF) for the detection of non-essential amino acid l-cysteine. The tri-metallic Ni–Ce–Cu MOF was synthesized via a solvothermal method. The cyclic voltammetry and the differential pulse voltammetry techniques were used to examine the electrochemical detection of l-cysteine. The Ni–Ce–Cu MOF shows an oxidation peak in PB solution at pH 3.0 between the potential range of 0.0 and 0.7 V and strong electro-catalytic activity toward the oxidation of l-cysteine across a wide linear range of 0.1 to 250 nM and low detection limit (LOD) was calculated of 1.56 nM. The analysis of l-cysteine in milk and egg yolk samples showed with recovery range of 96.75–103.5% and 97.78–99.43% with RSD% of 2.3–3.2% and 2.7–7.2%, respectively. These results show the Ni–Ce–Cu MOF has high selectivity for l-cysteine detection in milk and egg samples.

Phytohormones (plant hormones) are a class of small-molecule organic compounds synthesized de novo in plants. Although phytohormones are present in trace amounts, they play a key role in regulating plant growth and development, and in response to external stresses. Therefore, the analysis and monitoring of phytohormones have become an important research topic in precision agriculture. Among the various detection methods, electrochemical analysis is favored because of its simplicity, rapidity, high sensitivity, and in-situ monitoring. Graphene and graphene-like carbon materials have abundant sources, exhibiting large specific surface area, and excellent physicochemical properties. Thus, they have been widely used in the preparation of electrochemical biosensors for phytohormone detection. In this paper, the research advances of electrochemical sensors based on graphene and graphene-like carbon materials for phytohormone detection have been reviewed. The properties of graphene and graphene-like carbon materials are first introduced. Then, the research advances of electrochemical biosensors (including conventional electrochemical sensors, photoelectrochemical sensors, and electrochemiluminescence sensors) based on graphene and graphene-like carbon materials for phytohormone detection is summarized, with emphasis on their sensing strategies and the roles of graphene and graphene-like carbon materials in them. Finally, the development of electrochemical sensors based on graphene and graphene-like carbon materials for phytohormone detection is prospected.

Graphene-derived materials are an excellent electrode for electrochemical detection of heavy metals. In this study, a MnO2/ graphene supported on Ni foam electrode was prepared via ultrasonic impregnation and electrochemical deposition. The resulting electrode was used to detect Pb(II) in the aquatic environment. The graphene and MnO2 deposited on the Ni foam not only improved active surface area, but also promoted the electron transfer. The electrochemical performance towards Pb(II) was evaluated by cyclic voltammetry (CV) and square wave anodic stripping voltammetry (SWASV). The prepared electrode exhibited lower limit of detection (LOD, 0.2 μM (S/N = 3)) and good sensitivity (59.9 μAμM−1) for Pb(II) detection. Moreover, the prepared electrodes showed good stability and reproducibility. This excellent performance can be attributed to the strong adhesion force between graphene and MnO2, which provides compact structures for the enhancement of the mechanical stability. Thus, these combined results provide some technical considerations and scientific insights for the detection of heavy metal ions using composite electrodes.

The electrochemical type gas sensor has the advantage of being easy to use due its small size, and it is also relatively inexpensive. However, its output can easily vary depending on temperature and humidity conditions. Therefore, it is important to ascertain the exact output characteristics of a sensor according to the measuring environment in order to improve measurement accuracy for any set of given conditions. The purpose of this study is to obtain basic information about the output characteristics of a sensor that is used both indoor and outdoor according to the variation in temperature and humidity conditions in order to improve the accuracy of the sensor. To achieve this result, a calibration curve was made using ammonia standard gas and the calibration factor was calculated using the calibration curve and the measuring accuracy was confirmed with regard to the ammonia sensor. Based on the test results, the variation of the sensor output value was large in relation to temperature and humidity variation. It was found that the output value from the sensor at higher temperature and humidity conditions was also higher. However, the measuring accuracy of the sensor could be improved by more than 10% by applying the calibration factor and an average accuracy of more than 97% could be achieved. It is anticipated that the result of this study can be used as basic data to obtain more accurate results using electrochemical sensors for a given set of temperature and humidity conditions, and therefore, it can also be considered that the reliability and applicability of electrochemical sensors can be improved.

In order to measure the minute amount of Cu(II) in our environment, cyclic voltammetry (CV) and square-wave stripping voltammetry (SWSV) were performed for a trace copper assay using bismuth immobilized on a carbon nanotube paste electrode. An analytical working range of 30 to 240 μg/L Cu(II) was obtained for CV and SWSV. The SWSV precision obtained was 0.47 % (n = 15) RSD in 30.0 μg/L Cu(II). The detection limit obtained was 3.1 ng/L Cu(II) using SWSV, while the CV yielded the nano-range detection limit through the pre-concentration step. By using this research method, Cu(II) value could be determined in the urine of human sample and in the brain of fish sample. This research can be effectively applied to other cases of measuring minute amount of Cu(II) in living organisms.

The three electrode system was used to detect the pesticide fenitrothion (C9H12NO5PS. MW=277.24) using cyclic voltammetry (CV) and square wave anodic stripping voltammetry (SWASV). The working electrode was mercury immobilized on a carbon nanotube paste electrode (Hg-CNTPE). At the optimized condition, the limit of detection (LoD) was 0.6 ppt (2.16×10 -12 M), and the relative standard deviation was 0.035% (n=15). And there is more sensitive in detecting fenitrothion than common type carbon nanotube paste electrode. When it was implanted into the brain of live fish (carp), the existence of fenitrothion was measured without any destruction or damage of tissue.