본 연구의 목적은 알츠하이머질환(Alzheimer’s disease: AD) 동물 모델을 대상으로 트레드밀 운 동(Treadmill exercise: TE)과 환경강화(environmental enrichment: EE) 처치가 인지기능, 근 기능, 및 밀 착연접 단백질 발현에 미치는 영향을 확인하는데 있다. AD 동물 모델을 제작하기 위해 aluminum chloride(AlCl3)를 90일간(40mg/kg/하루) 투여 하였으며 동시에 TE(10-12m/min, 40-60min/day) 혹은 EE에 노출시켰다. 그 결과 AlCl3 투여에 의한 인지기능 저하와 근 기능 감소가 TE와 EE에 의해 완화된 것 으로 나타났다. 또한, TE와 EE는 AD 질환에서 나타나는 β-amyloid(Aβ), alpha-synuclein 및 tumor necrosis factor-α(TNF-α) 단백질의 발현 증가를 감소시킨 것으로 나타났다. 게다가 TE와 EE는 AlCl3 투여에 의해 감소된 밀착연접 단백질(Occludin, Claudin-5 및 ZO-1)의 발현을 통계적으로 유의하게 증가시킨 것으로 나타났다. 마지막으로 Aβ 단백질과 밀착연접 단백질과의 상관분석을 실시한 결과 부적 상 관관계(Occludin: r=-0.853, p=0.001; Claudin-5 : r=-0.352, p=0.915; ZO-1 : r=-0.424, p=0.0390) 로 나타났다. 따라서 이를 종합해 보면 TE 혹은 EE 처치는 AD에 나타나는 병리학적 특징들을 일부 완화 시켜 인지기능과 근 기능을 일부 개선 시킬 수 있는 효과적인 운동 방법이라고 생각된다.

In this study, we developed Rapid Enrichment Broth for Vibrio parahaemolyticus (REB-V), a broth capable enriching V. parahaemolyticus from 100 CFU/mL to 106 CFU/mL within 6 hours, which greatly facilitates the rapid detection of V. parahaemolyticus. Using a modified Gompertz model and response surface methodology, we optimized supplement sources to rapidly enrich V. parahaemolyticus. The addition of 0.003 g/10 mL of D-(+)- mannose, 0.002 g/10 mL of L-valine, and 0.002 g/10 mL of magnesium sulfate to 2% (w/v) NaCl BPW was the most effective combination of V. parahaemolyticus enrichment. Optimal V. parahaemolyticus culture conditions using REB-V were at pH 7.84 and 37oC. To confirm REB-V culture efficiency compared to 2% (w/v) NaCl BPW, we assessed the amount of enrichment achieved in 7 hours in each medium and extracted DNA samples from each culture every hour. Real-time PCR was performed using the extracted DNA to verify the applicability of this REB-V culture method to molecular diagnosis. V. parahaemolyticus was enriched to 5.452±0.151 Log CFU/mL in 2% (w/v) NaCl BPW in 7 hours, while in REB-V, it reached 7.831±0.323 Log CFU/mL. This confirmed that REB-V enriched V. parahaemolyticus to more than 106 CFU/mL within 6 hours. The enrichment rate of REB-V was faster than that of 2% (w/v) NaCl BPW, and the amount of enrichment within the same time was greater than that of 2% (w/v) NaCl BPW, indicating that REB-V exhibits excellent enrichment efficiency.

The development of separation method of radioactive tritium is imperative for treating tritiumcontaminated water originating from nuclear facilities. Polymer electrolyte membrane electrolysis technology represents a promising alternative to conventional alkaline electrolysis for tritium enrichment. Nevertheless, there has been limited research conducted thus far on the composition of membrane electrode assemblies (MEAs) specifically optimized for tritium separation, as well as the methods used for their fabrication. In this study, we conducted an investigation aimed at optimizing MEAs specifically tailored for tritium separation. Our approach involved the systematic variation of MEA components, including the anode, cathode, porous transport layer, and electrode formation method. The water electrolysis efficiency and the H/D separation factor in deuterated water (1%) were evaluated with respect to both the preparation method and the composition of the MEA. To assess the long-term stability of the MEAs, changes in cell voltage, resistance, and the active electrode area were analyzed using impedance analysis and cyclic voltammetry. Furthermore, we examined H/D separation factor both before and after degradation. The results showed that MEAs with different anode/cathode configurations and electrode formation methods improved the electrolysis efficiency compared to commercial MEAs. In addition, the degree of change in the resistance value was also different depending on the electrode formation method, indicating that the electrode formation method has a significant impact on the stability of the electrolysis system. Therefore, the study showed that the efficiency and long-term stability of the water electrolzer can be improved by optimizing the MEA fabrication method.

Tomatoes in greenhouse are a widely cultivated horticultural crop worldwide, accounting for high production and production value. When greenhouse ventilation is minimized during low temperature periods, CO2 enrichment is often used to increase tomato photosynthetic rate and yield. Plant-induced electrical signal (PIES) can be used as a technology to monitor changes in the biological response of crops due to environmental changes by using the principle of measuring the resistance value, or impedance, within the crop. This study was conducted to investigate the relationship between tomato growth data, vital response, and PIES resulting from CO2 enrichment in greenhouse tomatoes. The growth of tomato treated with CO2 enrichment in the morning was significantly better in all items except stem diameter compared to the control, and PIES values were also higher. The growth of tomato continuously applied with CO2 was better in the treatment groups than control, and there was no significant difference in chlorophyll fluorescence and photosynthesis. However, PIES and SPAD values were higher in the CO2 treatment group than control. CO2 enrichment have a direct relationship with PIES, growth increased, and transpiration increased due to the increased leaf area, resulting in increased water absorption, which appears to be reflected in PIES, which measures vascular impedance. Through this, this study suggests that PIES can be used to monitor crops due to environmental changes, and that PIES is a useful method for non-destructively and continuously monitoring changes of crops.

Spent fuels (SFs) are stored in a storage pool after discharge from nuclear power plants. They can be transferred to for the further processes such as dry storage sites, processing plants, or disposal sites. One of important measures of SF is the burnup. Since the radioactivity of SF is strongly dependent on its burnup, the burnup of SF should be well estimated for the safe management, storage, and final disposal. Published papers about the methodology for the burnup estimation from the known activities of important radioactive sources are somewhat rare. In this study, we analyzed the dependency of the burnup on the important radiation source activities using ORIGEN-ARP, and suggested simple correlations that relate the burnup and the important source activities directly. A burnup estimation equation is suggested for PWR fuels relating burnup with total neutron source intensity (TNSI), initial enrichment, and cooling time. And three burnup estimation equations for major gamma sources, 137Cs, 134Cs, and 154Eu are also suggested.

We aimed to investigate the effect of environmental enrichment via toys on the behaviour and performance of weanling pigs. A total of 300 pigs (LYD) were housed in different pens with ten pigs per replicate and ten pigs per head divided into 3 groups. Group 1 was called “CON” and received no toys, group 2 was TOY-2, and pigs in this group had access to toys in the first 2 weeks, and lastly, pigs in TOY-4 were given toys in the fourth week. The pigs had access to feed and water ad-libitum. The individual pig behaviours in each group was recorded on days 14 and 28 (d 14 and 28) with a video camera for accuracy. The results showed higher (p<0.05) overall ADG in TOY-4 compared with CON, while the overall ADFI was higher (p<0.05) in TOY-supplemented groups compared to CON. Diarrhea incidence and fecal score were lower on D 14 in TOY-supplemented groups compared with CON. Behavioural features such as ear biting and fighting were lower (p<0.05) in TOY-supplemented groups compared with CON on D 14. Tail biting was lower (p<0.05) in TOY-2 compared with CON at D 14. Conversely, at D 28, tail biting was lower (p<0.05) in TOY-4 compared with CON. The ADG improved due to the toy supplied to reduce undesirable social behaviours. We concluded that the environmental enrichment of pens with toys can help to improve the welfare in weaning pigs, leading to a greater survivability and more production thereby improving farmer incomes.

Spent nuclear fuel (SNF) characterization is important in terms of nuclear safety and safeguards. Regardless of whether SNF is waste or energy resource, the International Atomic Energy Agency (IAEA) Specific Safety Guide-15 states that the storage requirements of SNF comply with IAEA General Safety Requirement Part 5 (GSR Part 5) for predisposal management of radioactive waste. GSR Part 5 requires a classifying and characterizing of radioactive waste at various steps of predisposal management. Accordingly, SNF fuel should be stored/handled as accurately characterized in the storage stage before permanent disposal. Appropriate characterization methods must exist to meet the above requirements. The characterization of SNF is basically performed through destructive analysis/non-destructive analysis in addition to the calculation based on the reactor operation history. Burnup, Initial enrichment, and Cooling time (BIC) are the primary identification targets for SNF fuel characterization, and the analysis mainly uses the correlation identified between the BIC set and the other SNF characteristics (e.g., Burnup - neutron emission rate) for characterizing. So further identification of the correlation among SNF characteristics will be the basis for proposing a new analysis method. Therefore, we aimed to simulate a SNF assembly with varying burnup, initial enrichment, and cooling time, then correlate other SNF properties with BIC sets, and identify correlations available for SNF characterization. In this study, the ‘CE 16×16’ type assembly was simulated using the SCALEORIGAMI code by changing the BIC set, and decay heat, radiation emission characteristics, and nuclide inventory of the assembly were calculated. After that, it was analyzed how these characteristics change according to the change in the BIC set. This study is expected to be the basic data for proposing new method for characterizing the SNF assembly of PWR.

Non-conforming mesh를 이용해 구조적인 불연속성을 해석 시 요소 내 함수 불연속성과 특이점이 존재하며, 이로 인해 계산의 효율 성이 저하된다. 본 연구에서는 이 문제를 해결하기 위해 모멘트 피팅법을 응용한 선택적 확장기법(Duster and Allix, 2020)을 토대로 새로운 고효율 확장 기법을 제시하였다. 특히, 적분과정에서의 비효율성에 초점을 두고 두가지 개선 방안을 제안하고 이를 수치 예제 를 통해 검증하였다. 첫째로 음함수-모멘트간 효율적 계산을 위해 인공신경망을 도입하였으며, 기존 확장 기법에 비해 해의 정확성이 유지되면서도 효율적인 계산이 가능함을 확인하였다. 더불어, 구조 해석과 형상 표상용 격자를 분리, 낮은 밀도의 구조 해석 격자에서 도 정확성이 향상되었음을 보였다.

A simulation model was developed for heavy water pre-enrichment and detritiation by the Combined Electrolysis and Catalytic Exchange (CECE) process. In the CECE process, heavy water enrichment and detritiation are based on the principle that concentrated in to water phase through an isotopic exchange reaction between water vapor and hydrogen gas produced by a water electrolysis. An operational analysis for a liquid phase catalytic exchange column was carried out by the model equations, composed of a material balance and combined equilibrium relationships for a scrubbing and catalyst bed, respectively. As a result of simulation, the optimum flow ratio of water to the rising hydrogen gas in contact with the down-coming water was predicted as the key variables in the separation performance analysis at a given feed flow rate and isotopic composition. From a graphical approach based on this model, the operating conditions can be determined within the range where the operating line does not meet the combined equilibrium line before reaching the specified target concentration.

Widespread consumption of fresh-cut vegetables without cooking results in ingestion of major foodborne pathogens including Bacillus cereus. In this study, we aimed to develop a method to rapidly detect B. cereus in fresh-cut vegetables by combining commercial PCR analysis with enrichment of the pathogenic levels. A mixture of B. cereus strains (KCTC1013, KCTC1014, KCTC1092, KCTC1094, and KCTC3624) was inoculated on the surface of fresh-cut cabbage lettuce (20 g) and baby leafy vegetables (10 g) to concentration 1, 2, 3, 4, and 5 log CFU/g. Eighty milliliters of TSB with 0.15% polymyxin B was used for cabbage lettuce, and 90 mL of medium was used for baby leafy vegetables and incubated at 42oC for 0, 2, 3, 4, 5, 6, and 7 h. One milliliter of the enriched media was plated on mannitol-egg yolk-polymyxin agar for quantification, and another 1 mL was used for DNA extraction for PCR analysis. Additionally, the minimum number of sub-samples to be tested from a pack of fresh-cut vegetable samples was determined using 5 sub-samples. The results from this study showed that for detecting B. cereus in fresh-cut cabbage lettuce, 3, 4, 5, 6, and 7 h enrichment were required to at least detect 5, 4, 3, 2, and 1 log CFU/g of B. cereus, respectively. B. cereus in fresh-cut baby leafy vegetables could be detected after 2, 3, 4, 5, and 6 h of enrichment at 5, 4, 3, 2, and 1 log CFU/g, respectively, using a combination of enrichment and PCR analysis. To determine if a pack of fresh-cut vegetable is positive, the minimum number of sub-samples should be 3. These results can be used to develop a rapid detection method to semi-quantify B. cereus in fresh-cut vegetable samples combining enrichment and PCR.

기존의 L. monocytogenes 증균배지를 개량함으로써 증균배지를 개발하여 L. monocytogenes의 증균 효율을 높이며, DNA 추출에 사용되는 용해버퍼 및 용해조건을 개발함으로써 식육 및 식육가공품에서 L. monocytogenes를 효 율적이고 신속하게 검출하고자 하였다. 식품공전에 등재 되어 있는 L. monocytogenes 증균배지의 증균 효율을 비 교하였으며, Listeria Enrichment Broth (LEB)가 가장 우수한 증균 효율을 보였다. LEB에 탄소원, 질소원, 미네랄 등 다양한 성분을 첨가하여 증균배지를 개발하였으며, 그 결과 LEB에 0.1% pyruvate, 0.1% ferric citrate를 첨가한 개발 증균배지에서 L. monocytogenes가 가장 빠르게 증균되었다. L. monocytogenes의 DNA를 신속하고 효율적으로 추출하기 위해 용해버퍼와 용해조건을 개발하였으며, 그 결과 0.5% 또는 1% N-lauroylsarcosine sodium salt에 0.5 N NaOH와 0.5 M EDTA가 혼합된 용해버퍼를 이용하여 실온에서 30분 간 L. monocytogenes 세포를 용해시키는 것 이 DNA의 순도와 수율, 신규성과 경제적 측면에서 가장 우수한 것으로 확인되었다. 결론적으로 본 연구에서 개발 된 증균배지 및 DNA 추출법을 활용한다면 식육 및 식육 가공품에서 L. monocytogenes를 보다 신속하게 검출할 수 있을 것이다.

Pigs are considered as optimal donor animal for the successful xenotransplantation. To increase the possibility of clinical application, genetic modification to increase compatibility with human is an important and essential process. Genetic modification technique has been developed and improved to produce genetically modified pigs rapidly. CRISPR/Cas9 system is widely used in various fields including the production of transgenic animals and also can be enable multiple gene modifications. In this study, we developed new gene targeting vector and enrichment system for the rapid and efficient selection of genetically modified cells. We conducted co-transfection with two targeting vectors for simultaneous inactivation of two genes and enrichment of the genetically modified cells using MACS. After this efficient enrichment, genotypic analysis of each colony showed that colonies which have genetic modifications on both genes were confirmed with high efficiency. Somatic cell nuclear transfer was conducted with established donor cells and genetically modified pigs were successfully produced. Genotypic and phenotypic analysis of generated pigs showed identical genotypes with donor cells and no surface expression of α-Gal and HD antigens. Furthermore, functional analysis using pooled human serum revealed dramatically reduction of human natural antibody (IgG and IgM) binding level and natural antibody-mediated cytotoxicity. In conclusion, the constructed vector and enrichment system using MACS used in this study is efficient and useful to generate genetically modified donor cells with multiple genetic alterations and lead to an efficient production of genetically modified pigs.

본 연구에서는 신선편이 양배추 내 Bacillus cereus의 최 적 증균 온도를 선정하고 증균배양액에 소수성필터를 적용하여 multiplex PCR의 검출률을 확인하였다. B. cereus 증균온도는 B. cereus 균주 5 개를 혼합하여 1 Log CFU/ mL이 되도록 증균배지에 접종하고 30oC, 37oC, 42oC에서 증균한 뒤 3시간 간격으로 MYP agar에 도말한 후 계수하여 선정하였다. 소수성필터 미적용 그룹은 B. cereus 균 주 5 개를 혼합하여 신선편이 양배추에 접종한 뒤 최적 증균온도에서 증균하였으며, 증균배양액을 가열하여 DNA 를 추출한 뒤 multiplex PCR을 진행하였다. 소수성필터 적용 그룹은 증균배양액을 소수성 필터에 적용하고 필터에 있는 균을 멸균증류수로 현탁한 뒤 가열하여 추출된 DNA 로 multiplex PCR을 진행하였다. 증균온도 확인 결과, 6시간 증균 시 42oC에서 증균된 샘플(5.4 ± 0.3 Log CFU/mL) 과 30oC에서 증균된 샘플(4.6 ± 0.6 Log CFU/mL) 간 유의 차가 확인되었다(p < 0.05). 소수성필터 적용 유무에 따른 multiplex PCR 결과, 1 Log CFU/g 접종된 샘플의 검출률이 소수성 필터 적용 전 60%(3/5)에서 100%(5/5)로 향상 되었다. 2 Log CFU/g 접종 샘플은 소수성필터 적용 전 80%(4/5)에서 소수성 필터 적용 후 100%(5/5)로 검출률이 증가하였으나, 3 Log CFU/g 접종 샘플은 소수성 필터 적용 전후 모두 100%(5/5)로 확인되었다. 이상의 결과를 통해 신선편이 양배추 내 B. cereus 검출 시 증균배양액에 소수성필터를 적용하고 multiplex PCR을 적용했을 때 신속하고 효율적인 검출이 가능할 것으로 판단된다.

본 연구에서는 상용화 된 piperazine 기반 NE70 및 m-phenylene diamine 기반 NE90 나노여과막을 15 wt% 황산 수용액 조건에서 산 노출 뒤의 표면 특성평가를 통해 분리막의 내산성 평가를 진행하고자 한다. 표면 특성 평가(SEM/FT-IR/ToF-SIMS 등)를 통해 piperazine 기반 분리막이 낮은 내산성을 가짐을 확인하였다. 이러한 특성을 이용하여, piperazine 기반 NE70 분리막을 황산에 후처리를 하게 될 경우 분리막 기공을 조절할 수 있음을 확인하였으며, 최적화된 후처리 조건에서 서로 다른 분자량을 가지는 erythromycin (Mw ~ 734 Da) 과 vancomycin (Mw ~ 1486 Da) 항생제를 농축시키는 공정에 응용하였다.