검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 33

        1.
        2023.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Since last year, the government has enforced the 'Act on the Punishment of Severe Accidents, Etc.' (hereafter referred to as the 'Serious Accident Punishment Act'), which punishes business owners and business managers who fail to fulfill their duty of safety measures with 'imprisonment of one year or more' and the Occupational Safety and Health Act. Based on this, various occupational safety and health policies were developed, including the operation of a system related to entrusting the work of safety managers. Despite these efforts, the effect of implementing the Severe Accident Punishment Act is a groundbreaking change in the current disaster prevention policy, which has increased by 0.02%P and 0.03‱P, respectively, from the previous year to 0.65% of the total accident rate and 1.10‱ of the death rate per 10,000 people as of 2022. As the need emerged, attention was paid to 'collaboration and governance with safety management institutions' in the 'Severe Disaster Reduction Roadmap' announced by the Ministry of Employment and Labor in November 2022. In this study, a meaningful result was derived by comparing and analyzing the industrial accident status of workplaces entrusted by “A” safety management institutions with the national average based on the industrial accident survey table, and the types of industrial accidents that occurred in consigned workplaces were selected as intensive management targets. The policy direction for industrial accident prevention was established. It is necessary to develop safety management work manuals based on the results of this study, expertise, discover best cases of risk assessment and develop guides, and educate and train consigned workers. In addition, it suggests that the government's guidance and supervision are needed to advance the professionalism of safety management entrusted tasks, and that safety management institutions should strengthen their roles and functions for preventing and reducing industrial accidents. However, due to difficulties in disclosing information of specialized safety management institutions, the limitation of the provision, collection, and viewing of research-related data to “A” specialized safety management institutions remains a limitation of the research. It seems likely that more thorough research will be conducted.
        4,500원
        3.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        해양환경의 위험유해물질 배출규제는 주로 선박이나 해양시설 등으로부터의 오염규제에 한정되어 있기 때문에, 해안 인접 산업 시설들의 위험유해물질 배출 허용기준 및 배출 지침 수립 등의 해양배출제도의 수립 필요성이 제기되고 있다. 본 연구에서는 해양산업시 설의 위험유해물질 배출 허용기준 및 배출 지침 정보를 자세히 제공하고 있는 미국 환경보호청(US EPA)의 자료를 중심으로 허용기준 및 배출 지침 수립 등 배출 제도 체계를 소개하고 향후 국내 배출지침 적용에 대해 고찰했다.
        4,000원
        6.
        2021.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Background: Exercise is necessary for the health of companion dogs. It is necessary to determine the relationship between height, weight, age and amount of exercise for the purpose of companion dog's health. Objectives: A survey was conducted in this study to small-dog owners living in Yongin city, Gyeonggi-do about their canine healthcare awareness. Design: Questionnaire design. Methods: The questionnaire was composed of exercise amount, type of exercise, and the necessity of exercise, general health condition, and environment. A total of 139 survey results were obtained. The average value of each item was analyzed and expressed in terms of frequency and percentage. Then, Pearson's correlation coefficients were used to find the relationship between these items. Results: The weight and height were not shown to have a significant difference in the amount of exercise in the results. The weight had a weak positive correlation with “exercise time of canine per day”. The age had a weak negative correlation with “the number of canine exercise per week” and “frequency of canine exercise per day”, while it had a weak positive correlation with “selfassessment of canine lack of exercise”. Conclusion: Based on this study, it is believed that in the future, various environments where dogs can exercise are believed to be necessary for the era of convergence.
        4,000원
        7.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In general, companies operate systematically in response to financial risks such as exchange rates and liquidity, while they are vulnerable to risks in the manufacturing and sales processes. In particular, logistics refers to the activities for planning, managing and implementing efficient flows from the starting point of goods and products to the point of consumption, The purpose of this study was to develop key risks and key risk management indicators (KRIs) for risks that undermine logistics efficiency so that logistics risks can be effectively prevented and managed. As a result, 40 risk management indicators (KRIs) were developed in a total of six categories in the logistics sector, and the definition, calculation method and early warning grade of each KRI were presented so that companies could prevent risks in advance in logistics activities and contribute to enhancing efficiency of their work.
        4,000원
        8.
        2020.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 IMO 선박평형수관리협약과 관련하여 선박평형수처리시스템(BWMS) 산업에 대한 한국의 산업경쟁력 현황과 향후 발전방향을 제언하기 위하여, BWMS 관련 무역데이터를 기반으로 현시비교우위지수와 무역특화지수로 비교·분석하였다. 친환경선박에 대한 국제적 관심이 확대됨에 따라 IMO는 선박기인 오염물질 해양배출과 관련된 논의 및 협정 체결이 지속적으로 증가하고 있다. 동 협약의 이행국가들은 BWMS 산업이 높은 시장진입 장벽과 선도 시장진입자의 시장점유율 확대를 위해 경쟁하고 있으며 BWMS는 친환경선박 분야의 주요산업으로서 각 국가는 기술개발 및 산업경쟁력확보를 위해 노력하고 있다. 한국은 2019년 10월 기준(BWM.2/Circ.34/Rev.8) 최종 승인 받은 BWMS 전체 45개 중 17개(약 38 %)를 차지하고 있다. 동 산업의 시장점유 현황을 파악하기 위하여 상품코드 HS842219, HS84212, HS89가 부여된 무역데이터를 기반으로 현시비교우위지수와 무역특화지수를 산출 및 비교한 결과, 한국은 전 세계 대상으로 BWMS 시장 점유가 비교우위이나 독일, 덴마크 등의 국가에 비해서는 상대적 열위인 것으로 분석되었다. 그럼에도 불구하고 다수의 IMO 승인기술 건 수, 국내 승인기관 보유 등의 산업생태계가 조성되어 있어 향후 BWMS 시장 경쟁력이 강화될 가능성이 높은 것으로 분석되었다.
        4,000원
        9.
        2019.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently, the advancement of information and communication technology(ICT) is expanding the connectivity through Internet of Things(IoT), and the media of connection is also expanding from wire/cable transmission to broadband wireless communication, which has significantly improved mobility. This hyperconnectivity has become a key element of the fourth industrial revolution, whereas the supervisory control network of purification plants in korea is operated as a communication network separated from the outside, thereby lagging in terms of connectivity. This is considered the best way to ensure security, and thus there is hardly any consideration of establishing alternatives to operate an efficient and stable communication network. Moreover, security for management of a commercialized communication network and network management solution may be accompanied by immense costs, making it more difficult to make new attempts. Therefore, to improve the conditions for the current supervisory control network of purification plants, this study developed a industrial security L2 switch that supports modbus TCP(Transmission Control Protocol) communication and encryption function of the transmission section. As a result, the communication security performance improved significantly, and the cost for implementing the network management system using Historical Trend and information of HMI(Human Machine Interface) could be reduced by approximately KRW 200 million. The results of this study may be applied to systems for gas, electricity and social safety nets that are infrastructure communication networks that are similar to purification plants.
        4,200원
        11.
        2018.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this paper is to analyze the mechanism of the physical environment of North Korea’s Kaesong Industrial District in terms of landscape management. It also assesses how such a mechanism has been created and the effectiveness of the results. As a research method, we compared the architectural design and landscape management guidelines of fifteen companies in the initial complex of Kaesong Industrial District. The results follow. First, advanced spatial planning, such as landscape management, has contributed greatly to preparing the physical environment of Kaesong Industrial District to be a future-oriented economic special zone. Second, the landscape management methods that do not apply to the manufacturing complex were first transplanted to the North Korean Kaesong Industrial District ten years before they were adopted in South Korea. Third, officials of the two Koreas have generally recognized the necessity and effectiveness of landscape management. Fourth, the necessity of landscape management methods further developed at Kaesong Industrial District, as well as the means of implementation, will continue to be a positive precedent for future inter-Korean economic cooperation projects. However, some problems were found in the process of formulating and executing the landscape management plan. First, despite the fact that it is a national project in which the central government of directly intervenes, it is an impromptu progress without preparation of each special field, including landscape plan. Second, although Kaesong Industrial District is an inter-Korean economic cooperation project, North and South Korea have never been cooperative in specialty areas such as landscape management.
        4,300원
        12.
        2017.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, the land use is analyzed by using the SWMM-LID (Low Impact Development) program to minimize the environmental damage caused by the development. In order to effectively utilize pre - development hydrological conditions, we analyzed the land use of existing industrial complex. The study areas selected were a completed industrial complex and an ongoing industrial complex in order to effectively identify the characteristics of the industrial complex and the water circulation system. Numerical simulation used SWMM-LID to enable quantitative hydrological impact assessment of penetration, storage facilities and LID planning elements. In the case of natural conditions, the infiltration amount was 16.3% and 1.5% of the total rainfall at B, C point, respectively. However, after applying the existing land use plan, the infiltration amount at point B was 12.1% and at point C was 3.9 %. In the case of point B, the amount of infiltration decreased due to the development of greenery as an impervious site. On the other hand, the amount of infiltration at point C increased as the existing industrial complex was replaced by greenery. Therefore, high infiltration amount can be secured when land use plan is redeveloped in green areas or parks in areas where the permeability coefficient is high according to the ground conditions in the complex. Two types of bio-polymer soil were developed to increase the LID effect and were tested to compare typical soil with these bio-polymer soils.
        4,000원
        13.
        2014.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper reviewed the relationship between safety climate(superior attitude, education, precaution, communication, and job load) and safety performance(safety compliance and safety participation), and the moderating effects of gender and age. Based on the responses from 288 employees, the results of multiple regression analysis appeared as follow; 1) superior attitude effects positively on safety compliance and safety participation, but, job load effects negatively on safety compliance and safety participation. 2) precaution effects positively on safety participation. 3) education and precaution are more positively related with safety compliance and safety participation in female employee than in male employee. 4) education is more positively related with safety compliance and safety participation in older employee than in younger employee.
        4,200원
        14.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper analyzed the management quality activities and performance based on industrial types. We divided the business into four industrial types, manufacturing industry, service industry, medical institution and public enterprise. We analyzed the differences of the elements of management quality in industrial types. The results show that leadership, measurement, analysis and knowledge management and workforce focus categories are not significant and strategic planning, customer and market focus, process management and performance categories are significant. This paper proposes the directions of management quality activities and performance according to industrial types based on these results.
        4,000원
        15.
        2012.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper reviewed the relationship between information technology system and knowledge management activities, and the moderating effect of industrial type. The results of multiple regression analysis, based on the responses from 219 employees in manufacturing and financing service sector, showed that information technology infrastructure and information technology usage have positive effects on knowledge acquisition, knowledge transfer, and knowledge usage. In moderating effects, information technology infrastructure more positively related with knowledge acquisition in financing service sector than in manufacturing sector. And also information technology usage more positively related with knowledge transfer in financing service sector than in manufacturing sector.
        4,000원
        16.
        2012.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 밀크 카제인과 WPU를 이용한 하이브리드 수지를 합성하였다. 합성한 하이브리드 수지를 피혁(Full-Grain) 표면에 코팅을 하여 카제인이 하이브리드수지에 어떤 영향을 주는지에 대해 분석 하였다. 내용제성 테스트 데이터에 의하면 WPU 와 하이브리드 수지 양쪽 모두 높은 물성치를 나타내었다. 인장 강도 측정치에서는 WPU 단독 결과(2.130 kgf/mm2)가 가장 낮은 수치를 나타내었으며, WPC-3(WPU 91: casein resin 9)의 경우가 가장 높은 인장력(2.191 kgf/mm2)을 나타내었다. 또한 내마모도 측정에서는 WPC-3(50.090 mg.loss)가 좋은 물성값을 나타내었다. 연실률의 경우 WPU(637 %) 단독 코팅물의 분석값이 가장 높은 637%로 알 수 있었다.
        4,000원
        17.
        2012.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        미세 조직은 SEM, FT-IR 스펙트라, 인장특성, 그리고 [NCO]/[OH]의 mole %, 입도분석에 의해 측정하였다. 친환경적인 NATM에 관한 관심이 고조됨에 따라 스테인레스같은 금속코팅에 더욱더 중요한 열경화 무용제 수지를 합성 하였다. 이 수지는 일반적 도료와 비교하여 매우 강도가 강하고 내구성이 매우 좋다. 폴리우레탄 수지는 폴리올, IPDI, 실리콘 계면활성제, 촉매, 충전제로 구성된다. 폴리우레탄 화합물은 가교제가 첨가된 수지가 가교제가 첨가되지 않은 수지보다 물성이 우수함을 나타냈다. 견고한 폴리우레탄 도료의 기계적 특성은 [NCO]/[OH]와 가교제가 증가함에 따라 강도가 증가하였다. 합성한 도료의 물성 향상은 스테인레스 산업뿐만 아니라 다양한 산업에서 폴리우레탄 고분자 수지가 강구조물의 보수보강에 많은 응용이 기대된다.
        4,000원
        18.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is, by recognizing that recently, as crimes using information and various adverse-effect phenomena such as hacking and virus occur frequently with rapid development of information network such as Internet in every field of industry, the range of security is widening to the field of industrial areas for preventing the leaking of industrial technology and protecting that technology as well as information security only limited to IT area, and by establishing common concept about industrial security through education on the industrial security at the point of increasing importance of industrial security, to prepare the base of comprehensive risk management system for protecting company's assets (physical factor, technical factor and managerial factor) safely from the random threats or attacks inside and outside the company through assessment of important assets of the company, evaluation of threats and weak points, and risk assessment by building industrial security management system in order to protect company's information assets and resources which are connected to the existence of the company safely from the threats or attacks from inside or outside the company and to spread stable business activities.
        4,200원
        19.
        2009.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study was evaluated the indicators of GRI guideline LA6-LA9 for industrial safety sanitation field on 22 domestic sustainable management reports and 46 overseas reports published by companies in 2007 and 2008, was developed new indicators with emphasis on industrial safety sanitation act, and was assessed whether they are released. As a result, LA6(Percent of total workforce represented in formal joint management-work health and safety committees that help monitor and advise on occupational health and safety programs) was evaluated highest in release ratio on whether to release the reports by each indicator of industrial safety sanitation field using domestic sustainable management report GRI guideline, and in the case of overseas companies, it was evaluated that there is no companies that release all from LA6 through LA9 among GRI guideline, but it was grasped that the ratio of partial release is high. As for the release of indicators was developed with the use of industrial safety sanitation act of 22 domestic companies, the release of indicator No. 1(report and industrial disaster record) and 10(health diagnosis) of industrial safety sanitation act was high. This study is meaningful in that it analyzed the industrial safety sanitation field of sustainable management report(CSR) that has not been attempted so far with the use of new indicators developed with emphasis on GRI guideline and industrial safety sanitation act.
        4,000원
        20.
        2008.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In today's industrial society, one observes fierce competition aiming at profit generation among companies, and the utilization of complex machineries and cutting edge science and technology constitutes a constant threat to the life, body, and health of employees. In such a context, it is precisely the purpose of the Industrial Safety and Health Act that is in force to provide protection to the life and health of employees against hazardous and harmful environment and the role of enterprises becomes more and more important in the law. The Industrial Safety and Health Act places the responsibility for preventing industrial accidents on the shoulders of the business employer by providing safety and health information relating to current employees and creating an appropriate work environment. The employer must recognize the importance of prevention of industrial accident and must possess a business philosophy that places top priority on safety when it comes to company management. In light of such practical considerations, the present study approaches to find out the influence of safety and health management on business management from a statistical sample survey point of view. By doing this, the study hopes to show that a through safety management serves to protect the life and health of employees and raise profit for businesses. What is more, the study hopes to demonstrate that promoting a sound business culture can act as fertilizer that promotes the ushering in of a bright society.
        4,000원
        1 2