Amorphous In-Ga-Zn-O (a-IGZO) thin film transistors (TFTs) with a coplanar structure were fabricated to investigate the feasibility of their potential application in large size organic light emitting diodes (OLEDs). Drain currents, used as functions of the gate voltages for the TFTs, showed the output currents had slight differences in the saturation region, just as the output currents of the etch stopper TFTs did. The maximum difference in the threshold voltages of the In-Ga-Zn-O (a-IGZO) TFTs was as small as approximately 0.57 V. After the application of a positive bias voltage stress for 50,000 s, the values of the threshold voltage of the coplanar structure TFTs were only slightly shifted, by 0.18 V, indicative of their stability. The coplanar structure TFTs were embedded in OLEDs and exhibited a maximum luminance as large as 500 nits, and their color gamut satisfied 99 % of the digital cinema initiatives, confirming their suitability for large size and high resolution OLEDs. Further, the image density of large-size OLEDs embedded with the coplanar structure TFTs was significantly enhanced compared with OLEDs embedded with conventional TFTs.

This study was conducted in order to improve opening efficiency of the miniaturized large-scale net for anchovy boat seine gear to reduce the fleet size. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 150, 300 and 450 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the miniaturized large-scale net was as follows: the front part of the wing net, 8.7-13.3 m, 51-78%; the middle part of the wing net, 28.1-34.2 m, 55-67%; the entrance of the inside wing net, 31.3-38.5 m, 60-73%; the square and bosom, 22.7-29.6 m, 47-62%; the entrance of the body net, 20.9-26.4 m, 42-52%; the entrance of the bag net, 17.2-21 m, 72-89%; the flapper, 13.2-15.3 m, 78-83%; and the end of the bag net, 13.2-15.7 m, 72-75%. By connecting the net pendants with the front part of the wing net, the opening of the front part of the wing net was significantly improved compared to the traditional gear, which ensured both the wing net and the inside wing net with a normal net height. This, in turn, increased the efficiency of herding. The height of the body and bag nets was also higher than that of the tradition gear. In particular, the body net attached to the gear significantly improved the pocket shape of the gear and reduced the number of fish that were caught and escaped from the bag net, which increased the rate of fishing. The tension of towing nets was measured approximately between 2,958 and 7,110 kg, which indicates that the fleet can tow nets with 350 ps, the standard engine horse power. The fishing operation time was shortened compared with of the existent net, and the large-scale buoy attachment operation was also possible to operate the ship without fish detecting boat.

호접란 신품종 ‘화수 511’은 2000년 상미원에서 Phal. Happy Valentine을 양친으로 교배하여 육성한 F1개체 중에서 육성하였다. 2001년 ~ 2003년에 걸쳐 실생개체 중에서 영양생장과 개화특성이 우수한 개체 00-05-11을 선발하였다. 2004년과 2005년에 1차, 2차 특성검정을 통하여 품종의 안정성과 균일성을 확인하고 ‘화수 511’로 명명하였다. 신품종 ‘화수 511’은 화색이 진분홍(PN78A)이며, 화형은 안아피기로 꽃의 길이와 폭은 각각 7.8cm, 9.5cm로 대형이다. 잎의 길이와 폭은 각각 25.7cm, 8.7cm이며 엽형은 반직립이다. 기내증식율이 높고 식물체가 강건하고 생육이 빠르기 때문에 재배가 용이한 품종이다. 2008년 7월 8일 품종등록(등록번호 제2357호)하여 종자산업법에 의해 보호받고 있다.

본 연구에서는 2011년 우리나라 10개의 중대형 인공호에서 배스의 우점도에 의한 외래종 영향 및 이에 대 한 어류 군집 구조 분석을 실시하였고, 이들이 출현하는 호수에 대한 이화학적 수질특성을 분석하였다. 10개 인공호에서 출현한 어류는 13과 52종이었으며, 배스의 상대 풍부도는 전체 어종들 중 13%를 차지하여, 출현한 어류들 중 3번째로 높게 우점하는 것으로 나타났다. 이런 결과는 향후 배스가 수체내에서 최상위 포식자로서의 포식압 및 생태적 지위 특성 때문에 많은 인공호들에서는 본 배스의 외래종 번성에 의한 생태계 교란 효과가 극대화 될 수 있음을 제시하였다. 전체 조사 대상 인공호들 중 평택호에서 배스의 상대 풍부도는 60%로서 가장 높게 나타난 반면, 대청호에서 풍부도는 3%로서 가장 낮게 나타났다. 배스 서식지에 대한 이∙화학적 수질분석 결과에 따르면, COD는 평균 4.5±2.5 mg L-1 였고, 총인 (TP) 농도는 0.058±0.047 mg L-1, 총질소 (TN)는 2.2±1.4 mg L-1로 나타났다. 인(P)과 질소(N) 의 농도 분석에 따르면, 평택호, 낙동강하구언, 주남저수지 등의 수체는 부영양화 현상이 높은 것으로 나타났다. 배스의 상대풍부도와 수질자료의 비교분석에 따르면, 두 변수는 통계학적으로 유의한 상관관계 (p.0.05)를 보이지 않았다. 즉, 배스의 분포 및 풍부도 특성은 이 화학적 수질도 중요하겠지만, 이들보다는 여러 타 요인들, 즉, 물리적 서식지 특성, 이용 가능한 먹이양 및 경쟁생물의 밀도 등에 의해 더 영향 받을 것으로 추정되었다.

Axial flow fan under certain condition may stall. The rise in pressure across the impeller blade of an axial flow fan depends on the angle of attack. At a low back pressure, the air volume will be large and the angle of attack is small. In this study, the time dependent Navier-Stokes equations are numerically solved in large size axial-flow fan with groove

The objective of this study was to find out candidate genes associated with litter size trait in pigs of inbred Large Yorkshire and Landrace populations. 86 sows were screened for candidate genotypes along with litter size data recordings. Association of litter size with genotypes of candidate genes were investigated to verify the usefulness of each gene's genotypes as markers for the trait. For the lines of Large Yorkshire, PRLR3 and RBP4 genes were genotyped. Frequency distribution of PRLR3 with genotypes AA, AB and BB were each 0.14, 0.44 and 0.42. And the average litter size by PRLR3 genotypes were 8.83, 10.81 and 10.70 piglets per litter, the average estimated breeding values of which were 0.243, 0.332, 0.365, respectively for AA, AB and BB genotypes. Genotypic frequencies of RBP4 by AA, AB and BB genotypes were 0.10, 0.44 and 0.46. The average litter size by genotypes of RBP4 were 10.40, 10.57 and 10.35 piglets per litter and their corresponding average estimated breeding values were 0.451, 0.353 and 0.261, respectively for genotypes AA, AB and BB. Significance in differences among genotypes were not observed, but B allele of RBP4 seems to be associated with litter size. In Landrace lines, frequencies of RBP4 genotypes, AA, AB and BB were 0.29, 0.55 and 0.16. And the average litter size of these genotypes were 10.50, 11.08 and 11.00 piglets per litter. The corresponding averages of estimated breeding values of each genotypes were 0.172, 0.135 and 0.104. In Landrace lines, allele A was more likely to be associated with litter size, even if differences among average litter size were not significant. We conclude that genotyping of two candidate genes is a helpful tool to identify genetic potentials of litter size in pigs.

Multi-source evaporation is one of the methods to improve the thickness uniformity of thin films deposited by evaporation. In this study, a simulator for the relative thickness profile of a thin film deposited by a multi-source evaporation system was developed. Using this simulator, the relative thickness profiles of the evaporated thin films were simulated under various conditions, such as the number and arrangements of sources and source-to-substrate distance. The optimum conditions, in which the thickness uniformity is minimized, and the corresponding efficiency, were obtained. The substrate was a 5th generation substrate (dimensions of 1300 mm × 1100 mm). The number of sources and source-to-substrate distance were varied from 1 to 6 and 0 to the length of the major axis of the substrate (1300 mm), respectively. When the source plane, the area on which sources can be located, is limited to the substrate dimension, the minimum thickness uniformity, obtained when the number of sources is 6, was 3.3%; the corresponding efficiency was 16.6%. When the dimension of the source plane is enlarged two times, the thickness uniformity is remarkably improved while the efficiency is decreased. The minimum thickness uniformity, obtained when the number of sources is 6, was 0.5%; the corresponding efficiency was decreased to 9.1%. The expansion of the source plane brings about not only the improvement of the thickness uniformity, but also a decrement of the efficiency and an enlargement of equipment.

By joining the Giant Magellan Telescope (GMT) project, Korean astronomers will get 10% of the GMT time, starting in the late 2010s. To prepare the GMT era, it is important to evaluate the current observational research activities. We surveyed the research programs performed by domestic astronomers during 2007A - 2010A period, using optical/near - IR telescopes with a medium to large aperture mirror (larger than 4 m). We describe the method and criteria of the survey, and present the results of the analysis based on the collected data.

Recently, there has been a remarkable trend of using aggregates at sizes smaller than 13 mm for drainage asphalt pavement (DAP) in order to reduce the noise generated between vehicle tires and road surface. These DAPs have their performance and durability seriously worsen after several years in-service due to the clogging of void space and the abrasion. This paper proposes the use of large size aggregates in porous asphalt mixtures to overcome these defects. Results of laboratory and field experiments on asphalt mixtures with several aggregate gradations are investigated and compared. The study focuses on advantages of DAP using large size aggregate and on particle size combinations containing no fine aggregates of size 2.36 mm or less, which have not been considered in current engineering practice.

철근콘크리트 보의 전단강도에 대한 크리효과는 다른 각종 강도에 대한 크기효과에 비해 현저히 나타난다는 것이 많은 실험적 연구로부터 입증되었으며, 이를 배경으로 세계 여러 나라의 전단강도에 대한 설계 기준식들이 전단강도의 크리효과를 반영하고 있는 실정이다. 그러나, 철근콘크리트 구조물이 점점 대형화됨으로써 이와 같은 설계 기준식의 실험적 검토는 사실상 불가능하게 될 것이다. 본 연구에서는 파괴역학에 근거한 비선형 유한요소프로그램을 이용하여 전단보강철근이 없는 대형 철근콘크리트 보의 전단강도에 대한 크기 효과를 재현해 보았다. 또한, 해석 및 실험결과를 이용하여 크기효과가 고려된 몇 가지 대표적인 전단강도식과 비교하였다.

The energy saving is one of the most important factors for profit in marine transportation. In order to reduce the fuel oil consumtion the ship's propulsion efficiency must be increased as possible. The propulsion efficiency depends upon a combination of an engine and a propeller. The propeller has better efficiency as lower rotational speed. This situation led the engine manufacturers to design the engine that has low speed, long stroke and a small number of cylinders. Consequently, the variation of rotational torque became larger than before because of the longer delay-time in fuel oil injection process and an increased output per cylinder. As this new trends the conventional mechanical-hydrualic governors for engine speed control have been replaced by digital speed controllers which adopted the PID control or the optimal control algorithm. But these control algorithms have not enough robustness to suppress the variation of the delay-time and the parameter perturbation. In this paper we consider the delay-time and the perturbation of engine parameters as the modeling uncetainties. Next we design the robust servo controller which has zero offset in steady state engine speed, based on H sub(∞) control theory. The validity of the controller was investigated through the response simulation. We used a personal computer and an analog computer as the digital controller and the engine (plant) part respectively. And, we could certify that the designed controller maintains its robust servo performance even though the engine parameters may vary.

본 연구에서는 원하는 입자크기가 폴리부타디엔 라텍스를 제조하는 방법으로 공정조절이 쉽고 균일한 입자를 얻을 수 있는 막유화법을 이용하였으며, 유화제의 종류와 양, 첨가제의 양, 압력 등을 변수로 하여 실험을 행하였다. 제조된 라텍스의 입자크기와 분포를 분석하였으며, homogenizer를 이용한 직접유화법의 결과와 비교하였다. 또한 막투과 모델을 고찰하기 위하여 Harkins-Brown 식에 의해 이론적인 drop의 크기를 계산하였다. 실험결과 물대비 0.2 wt% 이상의 유화제 함량에서 안정한 라텍스를 얻을 수 있었고, 입자크기를 결정하는 가장 핵심적인 인자는 막표면의 기공 크기임을 알 수 있었다.

대왕'은 대립이며 종자 특성이 우수한 GWS91을 모본으로 하고 '석량풋콩'을 부본으로 1996년도에 인공교배를 하고 1997년부터 1998년까지 F1 - F2 양성하였다. 1999년부터 2001년도에 F3 - F5 세대를 계통육종법으로 선발한 GSL96202-2B-1-3-7계통으로 계통명은 '강원106호'이다. 주요 특성은 다음과 같다. 1. 유한신육형이며 꽃색은 자색이고 엽형은 난형이다. 입형은 구형이고 종피색은 황색, 제색은 황색이며 100립중은

‘대흑’은 밥밑용 특성이 우수한 단경 내재해 다수성 신품종 육성을 목표로 대립 장류용 품종인 대황콩과 단경 내도복 내재해 다수성 계통인 밀양 79호를 1997년 인공교배하여 계통 육종법으로 선발한 YS1298-2B-20-5-1-1-1 계통이다. 계통명은 ‘밀양158호’이고 품종등록번호는 No. 3009이며 주요특성은 다음과 같다. 1. ‘대흑’의 신육형은 유한신육형이며 화색은 자색이고 엽형은 환형이다. 모용 및 성숙기의 협은 갈색이며 종피색과 제색은 흑

본 실험 연구는 공기분사공법의 오픈케이슨기초의 주면마찰력 저감효과에 대해 규명하기 위해 이루어졌다. 연육교 건설을 위해 기초로 사용된 공기구멍이 설치된 대구경 케이슨이 본 연구를 위해 이용되었다. 공기분사공법을 사용 시, 침하 시간을 줄일 수 있었으며 일반전인 방법으로 도달할 수 없는 깊이까지 침하를 시킬 수 있었다. 또한, 예상했던 것 보다 두 배 이상의 주면마찰저항력 저항 저감 효과를 얻었으며, 이런 장점 외 추가적인 외부의 재하하중 없이도 케이슨을 침하시킬 수 있음을 보여주었다. 그 외 오픈케이슨 침설 시 발파에 의한 케이슨 손상을 공기분사공법을 이용하면 방지할 수 있음을 보여주었다.

A new garden pea cultivar, Daehyup 2, was developed at the Yeongnam Agricultural Research Institute (YARI) in 2006. It was selected from the cross between Olwandu and Sachulwandu in 1996. The preliminary, advanced, and regional yield trials for evaluation and selection of this cultivar were carried out from 2003 to 2006. It has white flower, yellow cotyledon, absent or very weakly curved pod shape and yellow seed color. It was resistant to virus and powdery mildew disease. The 100 green seed weight of Daehyup 2 was 65.5 g, which was 8.9 g heavier than check cultivar. The sucrose and total sugar contents of fresh pod of Daehyup 2 were 11.1% and 12.5%, respectively, which were 3.2% and 4.3% higher than those of Sachulwandu. The fresh pod yield of Daehyup 2 was similar to that of Sachulwandu with 12.16 ton per hectare in the regional yield trials carried out in three locations of Korea from 2005 to 2006.

A new cut-Qower gerbera (Gerbera hybrida Hort.) "Noble Hugging" was renamed from 'B3-16', a seedling selectedfrom Fi Population ofa cross ofmatemal parent "Michelle", the single flower having orange ray flowers and black disc and pollenparent "Picasso", t

A new cut-flower gerbera (Gerbera hybrida Hort.) "Raon" was bred from a cross between 'Kippros' of yellow colorwith the semi-double and 'Rora' of yellow color with the single at National Horticultural Research Institute, It was crossed in 1994and selected