The germination characteristics of the resting cysts of Pheopolykrikos hartmannii collected from the southern coastal sediments of Korea were studied at different temperature conditions, and the morphology and phylogeny of the germlings were examined. The resting cysts of Ph. hartmannii were round and characterized by a red accumulation body and many arrow-like spines and could germinate at temperature of 10 to 30°C. High germination rates (>90%) were observed at 15 and 20°C, indicating that the resting cysts could act as seed populations for the bloom initiation of Ph. hartmannii in Korean coastal waters in early summer or early fall. The morphology of the germlings was generally consistent with the previous description, and an apical groove characterized by a fully enclosed loop was observed. Phylogenetic analysis based on large SubUnit (LSU) rRNA gene sequences revealed that the germlings shared an identical sequence with the Korean and American isolates of Ph. hartmannii and was a sister clade of Polykrikos species.

Hydride reorientation is one of the major concerns for cladding integrity during dry storage. In this study, mechanical property of post-reorientation cladding was investigated according to the morphology and amount of the hydrides. Cladding peak temperature limit 400°C was suggested by U.S. NRC in concern of cladding creep and hydride reorientation. In line with this regulatory limit, hydride reorientation was conducted during cool-down process from the maximum temperature of 400°C, using constant internal pressurization method. The specimens were charged for hydrogen from 100 to 1,000 wppm, and various pressures range of 7.5-18.5 MPa were applied. The morphology was examined by optical microscopy. Radial hydride fraction (RHF) and radial hydride continuous path (RHCP) were calculated using image analysis software PROPHET. Finally, strain energy density (SED) was investigated via ring compress tests and the hydrogen concentration was analyzed. The result shows that when RHF is higher than 5%, SED exponentially decreases with RHF. For RHF less than 5%, SED was primarily affected by the total amount of hydrogen. Shortened length of radial hydrides with the presence of circumferential hydrides may block the radial propagation of crack. The result implies that lower burnup spent fuel with lower hydrogen concentration may be more vulnerable in terms of radial hydride compared to higher burnup fuel.

A strain of Alexandrium species was established by isolating cells from Jangmok Bay, Korea. Its morphology and molecular phylogeny based on LSU rRNA gene sequences were examined. In addition, growth responses of this Alexandrium species to changes in temperature, salinity, and nutrient concentrations were investigated. This Alexandrium species from Jangmok Bay had a ventral pore on the 1′, which was morphologically consistent with previously described Alexandrium tamarense and A. catenella. Phylogenetic analyses revealed that this isolate was assigned to A. pacificum (Group IV) within A. tamarense species complex. In growth experiments, relatively high growth rates and cell densities of A. pacificum (Group IV) were observed at 15°C and 20°C. This species also grew under a wide range of salinity. This indicates that this Korean isolate of A. pacificum (Group IV) is a stenothermic and euryhaline species. In growth responses to changes in nutrient levels, enhanced growth rates and cell densities of A. pacificum (Group IV) were observed with additions of nitrate and phosphate. In particular, rapid uptakes of phosphate by A. pacificum (Group IV) were observed in experimental treatments, indicating that the increase in phosphate concentration could stimulate the growth of A. pacificum (Group IV).

Two kinds of mesocarbon microbeads (MCMBs) with different chemical composition have been synthesized. The MCMBs were molded and heat treated at temperatures above 2000 °C to obtain graphite blocks. The effects of chemical composition of MCMBs on the pore morphology, carbon texture and thermal properties of the derived graphite blocks have been explored. The pore morphology was investigated by small angle X-ray scattering technique and a graphitization-induced morphology transition was observed. When the graphitic crystallite size exceeded a threshold value, the association of crystallites and migration of randomly distributed pores took place extensively. For the graphite blocks made of MCMBs which had light components with higher aromaticity value, the growth of crystallites caused a significant enhancement in thermal conductivity for the specimens. However, for the other kind of MCMBs, their light components tended to form solid porous carbon texture after graphitization, and the thermal conductivity coefficients of their graphite blocks could only increase slightly as crystallites grew. It was suggested that the thermal resistance at the granule’s boundary became noticeable in the latter case and thus the growth of thermal conductivity coefficients was prominently hindered.

The development of advanced materials to improve the efficiency of photoelectrochemical (PEC) water splitting paves the way for widespread renewable energy technologies. Efficient photoanodes with strong absorbance in visible light increases the effectiveness of solar energy conversion systems. MoS2 in a two-dimensional semiconductor that has excellent absorption performance in visible light and high catalytic activity, showing considerable potential as an agent of PEC water splitting. In this study, we successfully modulated the MoS2 morphology on indium tin oxide substrate by using the metalorganic chemical vapor deposition method, and applied the PEC application. The PEC photocurrent of the vertically grown MoS2 nanosheet structure significantly increased relative to that of MoS2 nanoparticles because of the efficient transfer of charge carriers and high-density active sites. The enhanced photocurrent was attributed to the efficient charge separation and improved light absorption of the MoS2 nanosheet structure. Meanwhile, the photocurrent property of thick nanosheets decreased because of the limit imposed by the diffusion lengths of carriers. This study proposes a valuable photoelectrode design with suitable nanosheet morphology for efficient PEC water splitting.

Jak-STAT pathway is required for embryogenesis, female gametogenesis, cytokine-mediated neuroprotection, diabetes, obesity, cancer, stem cell, and various tissues. The noncanonical role of Jak-STAT in mitochondria function was supported by the detection of STAT protein in mitochondria, however, several studies show that STAT protein is detected in the endoplasmic reticulum (ER), and not in mitochondria. STAT protein may alter mitochondria function without entering mitochondria, this involves regulation of fission and fusion proteins to change mitochondria morphology. However, how changes in mitochondria morphology lead to changes in mitochondria metabolism needs further investigation.

Recently, due to high theoretical capacitance and excellent ion diffusion rate caused by the 2D layered crystal structure, transition metal hydroxides (TMHs) have generated considerable attention as active materials in supercapacitors (or electrochemical capacitors). However, TMHs should be designed using morphological or structural modification if they are to be used as active materials in supercapacitors, because they have insulation properties that induce low charge transfer rate. This study aims to modify the morphological structure for high cycling stability and fast charge storage kinetics of TMHs through the use of nickel cobalt hydroxide [NiCo(OH)2] decorated on nickel foam. Among the samples used, needle-like NiCo(OH)2 decorated on nickel foam offers a high specific capacitance (1110.9 F/g at current density of 0.5 A/g) with good rate capability (1110.9 - 746.7 F/g at current densities of 0.5 - 10.0 A/g). Moreover, at a high current density (10.0 A/g), a remarkable capacitance (713.8 F/g) and capacitance retention of 95.6% after 5000 cycles are noted. These results are attributed to high charge storage sites of needle-like NiCo(OH)2 and uniformly grown NiCo(OH)2 on nickel foam surface.

This study investigated various levels of sodium nitrite and probiotics (SNPro) combination as an alternative to zinc oxide on the growth performance, immune response, intestinal microflora, and morphology of weaned pigs. One hundred and ninety-two weaned pigs (Landrace×Yorkshire×Duroc) with an average body weight of 6.51±0.15 kg were randomly assigned to four treatments(n=6) on the basis of their initial body weight. Experimental period was divided into phase 1 and 2 (each 14 days). The dietary treatments were: 1) Basal diet (control), 2) SNPro1 (control+0.01% SNPro), 3) SNPro2 (control+0.02% SNPro), 4) SNPro3 (control+0.03% SNPro). The average daily gain when SNPro was added to the diet was 288, 309, 319, 324 g in phase 1, 355, 387, 410, 407 g in phase 2 and 321, 348, 364, 366 g in the overall. The concentration of interleukin-8 and interleukin-10 in serum when SNPro was added to the diet were 15, 13.5, 13, 12.8 ng/ml and 165, 162, 155, 145 ng/ml (p<0.05) but toll-like receptor 4 and immunoglobulin G levels in serum were no significantly different. The colonization of Escherichia coli in the ileum and Salmonella spp. in the caecum were significantly decreased as SNPro level increased (p<0.05). However, the population of Lactobacillus spp. did not differ among the groups. Although villus height and villus height to crypt depth ratio were not significantly affected by the treatments, crypt depth in the jejunum was 599, 586, 615, 599 ㎛ as SNPro level increased (p<0.05). In conclusion, SNPro had beneficial effects on growth performance, immune response, intestinal microflora and morphology weaned pigs. Therefore, SNPro not only can be considered as an alternative for the pharmacological level of zinc oxide in weaning pigs but also ideal dietary SNPro level was 0.02%.

This study was conducted to determine the effects of dietary protein level and supplementation of protease on growth performance, nutrient digestibility, gut microflora, intestinal morphology and fecal noxious gas emission in weanling pigs. A total of 240 weaned pigs (Landrace×Yorkshire×Duroc, 5.82±0.3 kg) were used during 4 weeks in 2 phases (days 0-14, phase 1; and days 15-28, phase 2) feeding program based on age and initial body weight. Pigs were allocated to 2×2 factorial arrangement, including 2 protein levels (HP, high protein; LP, low protein) and 2 protease levels (with or without protease). The average daily gain in the LP treatment (357 g/d) was increased rather than the HP treatment (339 g/d). A greater avarage daily gain was observed in dietary suppiemented protease treatment (358 vs 339 g/d). Average feed intake was greater in the LP treatment (544 g/d) rather than the HP treatment (530 g/d). A greater average daily feed intake was observed in dietary supplemented protease treatment (552 vs 523 g/d). Dry matter and crude protein digestibility were increased in dietary supplemented protease treatment (82.62% and 76.08%, respectively) rather than non-supplemented treatment (81.74% and 75.13%, respectively). Ileal Lactobacillus spp. count increased in dietary supplemented protease treatment (7.42 vs 7.32 log10CFU/g). Emission of H2S was decreased in the LP treatment (4.41 ppm) rather than HP treatment (4.78 ppm). Emission of NH3 was decreased in dietary supplemented protease treatment (10.43 ppm vs 11.76 ppm). In conclusion, the decrease of dietary protein level and supplementation of protease had beneficial effects on growth performance, nutrient digestibility, gut microflora, and noxious gas emission in weanling pigs.

The (Ga1-xZnx)(N1-xOx) solid solution is attracting extensive attention for photocatalytic water splitting and wastewater treatment owing to its narrow and controllable band gap. To optimize the photocatalytic performance of the solid solution, the key points are to decrease its band gap and recombination rate. In this study, (Ga1-xZnx)(N1-xOx) nanofibers with various Zn fractions are prepared by electrospinning followed by calcination and nitridation. The effect of the composition and crystallinity of electrospun oxide nanofibers on the morphology and optical properties of the obtained solid-solution nanofibers are systematically investigated. The results show that the final shape of the (Ga1-xZnx) (N1-xOx) material is greatly affected by the crystallinity of the oxide nanofibers before nitridation. The photocatalytic properties of (Ga1-xZnx)(N1-xOx) with different Ga:Zn atomic ratios are investigated by studying the degradation of rhodamine B under visible light irradiation.