검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 61

        1.
        2023.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Carbon black is a material in the form of fine black powder obtained by incomplete combustion or pyrolysis of hydrocarbons, and is composed of 90-99% carbon, and the rest is composed of hydrogen and oxygen. In the event of an emergency during the manufacture of carbon black, the generated tail gas should be safely discharged through an emergency line to prevent fire, explosion, and environmental pollution accidents caused by the tail gas. If the pressure continues to rise, the pressure control valve shall operate and the rupture plate shall be ruptured sequentially and the tail gas shall be discharged to the vent stack through the emergency line. As an emergency emission system, even if some untreated substances in the tail gas are released into the atmosphere, they are lighter than air, so it is safe to discharge them to a safe place through the Vent Stack. If the gas pressure is rising or worse, it is discharged from the Vent Stackine, and discharging fuel.
        4,000원
        2.
        2023.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In order to solve the rapidly increasing domestic delivery volume and various problems in the recent metropolitan area, domestic researchers are conducting research on the development of “Urban Logistics System Using Underground Space” using existing urban railway facilities in the city. Safety analysis and scenario analysis should be performed for the safe system design of the new concept logistics system, but the scenario analysis techniques performed in previous studies so far do not have standards and are defined differently depending on the domain, subject, or purpose. In addition, it is necessary to improve the difficulty of clearly defining the control structure and the omission of UCA in the existing STPA safety analysis. In this study, an improved scenario table is proposed for the AGV horizontal transport device, which is a key equipment of an urban logistics system using underground space, and a process model is proposed by linking systematic STPA safety analysis and scenario analysis, and UCA and Control Structure Guidelines are provided to create a safety analysis.
        4,000원
        4.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The latest issue is the smart factory. In order to implement this smart factory, the most fundamental element is to establish product specifications for factors affecting the product, obtain useful data to analyzed and predicted, and maintain safety. But most manufacturers have many errors. Therefore, the purpose of this study is to verify factors of product through statistical techniques and to study the process control and safety.
        4,000원
        6.
        2018.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Industrial disasters cause lots of damages from individuals to companies and country. Especially, damages caused by constructional disasters take very large portion in the whole industry and are accompanied by huge personal·physical damages. For the prevention of disasters, roles of safety manager are very important and especially, effects of disaster prevention can be changed by occupational ability of construction safety manager. To improve job abilities of safety manager, job education is very important. This research suggested a model for job education management of construction safety manager and proposed improvements as a study on improvement of curriculum for vitalization of job education of construction safety manager so as to improve occupational ability of safety manager. To achieve them, this research examined standard and operation status of current job education of safety manager and the problems and suggested a model materializing job educational contents as a measure to vitalize job education system of safety manager.
        4,000원
        7.
        2017.04 구독 인증기관 무료, 개인회원 유료
        As a result of frequent occurrence of serious industrial accidents due to chemical substances, Korea Occupational Safety & Health Agency has been implementing the PSM system (process safety management) since 1996, and the target sites are required to submit process safety reports. In the semiconductor business, which is becoming smaller and more integrated as the technology advances, many of these hazardous chemicals are used. Most of the semiconductor sites are PSM target sites, and many devices are included in the PSM target equipment. This study optimizes the introduction and setup process of new equipments in the semiconductor workplace using harmful hazardous materials, and conducted an empirical study on the improvement of the safety risk, focusing on the S group semiconductor business, and applied the common standard of work under the PSM system This is an example of improving the risk of leakage of toxic gas components and waste of rework by arranging functions and risks in the space centering method
        4,000원
        8.
        2016.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The train-centric control systems development has some distinct points in that a big size of government budget is in general expended in there and the development duration seems to be long. In addition, the changes are ever made continuously in the capability and operational requirements for Trains. Thus, the impact of the potential changes in the required operational capability on the development activities can induce some type of project risks [7]. As such, proper management of project risk has been one of crucial subjects in the train systems development. All these notes combined together make it the significance of the safety management process be raised further up in the train-centric control systems development. As such, the underlying safety management process should be capable of appropriately handling the potential risks that can be created due to the unexpected changes and the long-term development period. The process should also be complemented for the safety consideration of train-centric control systems, for instance, stop. To study these aspect is the objective of the paper. To do so, a step-by-step approach to analyzing the safety management process is first presented. Then, to enhance the process some necessary and useful activities are added in terms of risk and safety management. Then, to pursue some enhancement on the process, a set of necessary and useful activities are added in terms of risk and safety management. The resultant process is further analyzed and tailored using a design structure matrix method. The resultant process is applied in a train-centric control development as a case study.
        4,000원
        9.
        2016.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The main point of this study is to find out duplicates and differences among various regulations from different organizations. Also, it focuses on creating a reasonably unified regulation system to standardize safety & environment management. In this study, I analyzed the commonalities and the differences of two systems which are typical korean Process Safety Management System and off-site Consequence Analysis. It is confirmed that there are 25 species of overlapped material of those two systems and assessment like handling material information, facilities lists, hazardous substances and list of machine power. Process safety report focuses on onsite workers and facility protect. On the other hand, off-site Consequence Analysis focuses on design, arrangement and management of handling facility from off-site influence. I found difference two system of Enforcement purposes and way. Contradiction of Harmful information of Chemicals Control Act and occupation safety and health acts from same material. To be specific, There are no unit rule of occupation safety and health acts. so it permit inch, psi etc. But Chemicals Control Act provides that m, Mpa units. Therefore, Each regulatory duplication of items for chemicals management, standardization is writing so that you can coordinate overlapping items in the measures the need to be presented.
        4,000원
        10.
        2016.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Purpose: This study was tried to identify the effects of simulation program by applying hazard perception training on self-efficacy of patient safety, error recovery and problemsolving process in nursing students. Methods: A nonequivalent control group designed was used. The study was composed of hazard perception training and simulation program. Sixteen teams of a total of 61 nursing students participated in the simulation program using a high fidelity simulator. The collected data were analyzed by descriptive statistics, χ2-test and t-test using PASW 18.0 program. Result: There were statistically signigicant in self-efficacy of patient safety(t=2.55, p=.013), error recovery(t=2.82, p=.007), and problem-solving process(t=3.29, p=.002) in the experimental group. Conclusion: These results indicate that the simulation program by applying hazard perception training is effective in improving self-efficacy of patient safety, error recovery and problem-solving process for nursing students. Further study is recommended to confirm the long-term effects of the simulation program by applying hazard perception training.
        4,000원
        11.
        2015.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 국내 식품안전보건지표의 개발과정을 정립하기위해 수행되었다. 이를 위해 국내 식품안전보건지표의 개발과정을 제안하고, 제안된 과정에 대해 시뮬레이션을 함으로서 타당성 검사를 실시하고, 개발된 지표의 활용방안을 제시하였다. 국내 식품안전보건지표 개발과정은 국내환경보건지표 개발과정을 주로 참고하여 설계되었으며, DPSEEA 모형을 적용하였다. 제안된 식품안전보건지표를 개발과정은 크게 개발단계와 운용단계로 나뉜다. 개발단계는 초기지표 제안, 후보지표 선정, 자료 현황 조사, 실행가능성 평가, 파일럿 스터디, 최종 지표 선정의 6단계로 구성되며, 운용단계는 주기적인 지표의 산출과 공표로 구성된다. 개발의 6개 단계는 전반적인 식품안전보건지표 개발을 총괄하는 Task Force팀과 각 개발 단계에서 제안된 지표를 검토 및 평가하는 자문위원회(최소 학계 4명, 연구계 2명, 식약처 관련부서 전문가 4명)의 단계적 역할분배를 통해 운영되도록 하였다. 제안된 과정의 타당성검토를 위해 시뮬레이션을 시행한 결과 제안된 45개의 초기지표중 최종적으로 4개의 지표(세부지표 17개)가 선정되었다: ‘국산 과일·채소류 내 잔류농약/제초제 잔류랑 적합판정비율’, ‘식품매개질환사고(outbreak) 발생 수’, ‘식품매개(food-borne) 법정전염병의 발생률’, ‘살모넬라 식중독(Salmonellosis) 발생률’. 선정된 지표는 지수화를 통해 효과적으로 활용될 수 있다. 2010~2012년의 지표를 토대로 비율차를 적용한 통합식품안전보건지수를 산출한 결과 2010년 대비 2011년, 2011년 대비 2012년의 통합식품안전 보건지수로 10.37과 9.87이 산출되었다. 이는 식품안전보건상태가 2010년에 비하여 2011년에 10.37%, 2011년에 비해 2012년에 9.87% 호전되었음을 의미한다. 또한, 개별지표의 변화를 살펴봄으로서 변화율에 기여도가 큰 지표를 파악할 수 있으며, 통합식품안전보건지수를 도식화함으로서 대중과 정책입안자의 이해를 높일 수 있다. 이와 같이 식품안전보건지표는 다방면으로 효율적으로 활용될 수 있기 때문에 앞으로 더욱 큰 관심과 함께 법안의 제정과 활발한 연구가 필요하다.
        4,000원
        12.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        System is the organization of hardware, software, personnel and facilities needed to perform a designated function within a stated environment with specified results. The trend of modern systems is getting more complex and larger. The system is necessary for modern society but the minor malfunction of the system can result the enormous human and material losses. Recently it is being heightened the concern for system safety and required to be built and applied Safety Engineering standard Guideline for safety of complex and large-sized system. This paper describes the System Engineering Process model integrated with Safety Engineering and the establishment of standard safety guidelines for safety of product development using DMADOV Methodology of the Lean 6 Sigma.
        4,000원
        13.
        2015.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The weapon systems development has some distinct characteristics in that a big size of government budget (derived from national tax) has been expended frequently and the completion of the development projects seems to take long. Thus, the impact of the potential changes in the required operational capability on the development activities can induce some type of project risks. As such, proper management of project risk has been one of crucial subjects in the weapon systems development. Although a variety of methods can be considered, an approach based on the test and evaluation (T&E) process has been selected in this paper in order to appropriately handle those potential risks. In the study of the underlying T&E process, the safety consideration (for instance, explosiveness) of weapon systems is also included. To achieve the objective of the paper, a step-by-step procedure is first presented in the analysis of the T&E process. Then, to pursue some enhancement on the process, a set of necessary and useful activities are added in terms of risk and safety management. The resultant process is further analyzed and tailored based on a design structure matrix method. The case study of a tank development is also discusse
        4,000원
        14.
        2015.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. Thus, we consider several factors to build the safety estimation model to meet fairness and rationality. This paper present the yearly statistic data of accident from KOSHA analyze the data by industry, scale, year of service of a employee, age and other factors; build the safety estimation model for the business based on the accident report derived the analysis. The estimation model is established by the weights for accident type, degree, scale, industry, year of service, and age of the employee derived from ANP(Analytic Network Process).
        4,200원
        15.
        2014.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Modern weapon systems are getting more complex in terms of the functionality and also the conditions on the environment and range in which they are deployed and used. Therefore, many development programs can easily be exposed to a variety of risks, resulting in delayed schedules and cost overrun. As such, effective means are necessary to keep the defence budget at an affordable level while competitive edges on technological aspects are retained. As one way to meet those need, modeling and simulation (M&S) methods have widely been used, particularly in the test and evaluation (T&E) process for weapon systems development. The result of M&S-based systems development should be evaluated by the verification, validation & accreditation (VV&A) process to assure keeping reliability at a desired level. On the other hand, due to the explosiveness, the weapons systems development naturally requires to consider safety issues in both the T&E and operational periods. The purpose of this paper is to improve the VV&A process by reflecting the safety requirements therein. To do so, the VV&A process has been analyzed and graphically modeled first and then safety elements have been incorporated effectively. The use of the improved process in the war ships development has also been discussed. Based on the process proposed and the consequent database constructed, the target system can be expected to benefit from reducing development risks while assuring systems safety.
        4,000원
        17.
        2014.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In weapon systems development, live fire tests have been frequently adopted to evaluate the performance of the systems under development. Therefore, it is necessary to ensure safety in the test ranges where the live fire tests can cause serious hazards. During the tests, a special care must be taken to protect the test and evaluation (T&E) personnel and also test assets from potential danger and hazards. Thus, the development and management of the range safety process is quite important in the tests of guided missiles and artillery considering the explosive power of the destruction. Note also that with a newly evolving era of weapon systems such as laser, EMP and non-lethal weapons, the test procedure for such systems is very complex. Therefore, keeping the safety level in the test ranges is getting more difficult due to the increased unpredictability for unknown hazards. The objective of this paper is to study on how to enhance the safety in the test ranges. To do so, an approach is proposed based on model-based systems engineering (MBSE). Specifically, a functional architecture is derived utilizing the MBSE method for the design of the range safety process under the condition that the derived architecture must satisfy both the complex test situation and the safety requirements. The architecture developed in the paper has also been investigated by simulation using a computer-aided systems engineering tool. The systematic application of this study in weapon live tests is expected to reduce unexpected hazards and test design time. Our approach is intended to be a trial to get closer to the recent theme in T&E community, "Testing at the speed of stakeholder's need and rapid requirement for rapid acquisition."
        4,000원
        18.
        2014.04 구독 인증기관 무료, 개인회원 유료
        최근 현대 무기체계는 국방예산 절감과 보다 빠르게 전략화하기 위해 시험평가에 소요 되는 기간을 줄이고자 하고 있다. 이에 따라 기존의 무기체계 시험평가 프로세스 에서 다루는 시스템 설계에 대한 단계별 안전 활동 강화의 필요성 역시 강조되고 있 다. 본 논문에서는 무기체계 획득 프로세스에서 위험 완화의 구성 요소로 확인 (Verification), 검증(Validation) 및 인정(Accreditation) 활동을 고려한 시험평가 프로세 스의 개선사항 도출과 모델링을 통해 무기체계 시스템인 함정 무기체계를 대상으로 적용 및 조정 구축에 대한 내용을 기술하고 있다. 본 연구의 결과를 토대로 시험평가 의 위험요소, 위험평가 데이터의 관리 및 추적 기능을 개선함으로써 향후 M&S기반 획득 시험평가 시 체계 개발 및 운용에서 발생할 수 있는 비용 및 시간을 절감 시킬 수 있을 것으로 기대된다.
        4,300원
        19.
        2013.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Polyurethane is an elastomer polymer, which is flexible, tough and resistant. This material is widely used various fields such as automobile, aeroplane, textiles, construction industries. Currently there exists more than 1,000 manufacturing companies in Korea that are closely related to Polyurethane. In spite of a number of Polyurethane manufacturing companies, there are little attention in academia as well as industries to study the safety and manufacturing process improvement on Polyurethane. In this paper, we consider a case study for the Polyurethane manufacturer to improve productivity by using safety management and manufacturing process reengineering. After careful analysis, we derive three enhancements to increasing the safety and productivity for the target company. Especially, we achieve about 16% productivity improvement in roller manufacturing process by replacing manual stirring job with automated mixing machine.
        4,300원
        20.
        2013.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        With the recent changes in the environment of weapon systems acquisition, the systems development is becoming more susceptible to a variety of risks. To cope with this situation, US DoD has been emphasizing the importance of constantly applying the test and evaluation (T&E) process throughout the whole life cycle of the weapon systems. In particular, the safety requirements are called for attention while dealing with system risks. To this end, the present paper is aimed at studying the T&E process which incorporates the systems safety in weapon systems development. Analyzing and modeling the relevant processes has made it possible to achieve the objective. As a case study, the model results were applied to the development of unmanned aerial vehicles.
        4,000원
        1 2 3 4