고창 해빈은 황해의 동편, 한국 서남해 연안에 위치하며, 북쪽에서 남쪽 방향으로 동호리, 광승리, 명사십리 해 빈으로 구성된다. 고창 해빈은 대조차, 개방형, 직선형 해안, 모래 저질의 특징을 보인다. 본 연구는 고창 해빈에서 표 층 지형 변화와 퇴적물 집적률의 연평균과 계절 특성을 연구하였다. 2014년 겨울(2월), 봄(5월), 여름(8월), 가을(11월)과 2015년 겨울(2월)의 5계절 동안, 3개 측선을 따라 총 315개 지점에서 지형 고도를 측정하였다. 해안선에 수직인 각 측 선은 30 m 간격의 21 지점으로 구성된다. 고창 해빈의 2014년 연평균 집적률은 −0.081 m/yr로 침식이 우세하였다. 지 역별 연평균 집적률은 동호리 해빈 −0.091 m/yr, 광승리 해빈 −0.051 m/yr, 명사십리 해빈 −0.10 m/yr로 나타났다.

Ti alloys are extensively used in high-technology application because of their strength, oxidation resistance at high temperature. However, Ti alloys tend to be classified very difficult to cut material. In this paper, The powder synthesis, spark plasma sintering (SPS), bulk material properties such as electrical conductivity and thermal conductivity are systematically examined on Ti2AlN and Ti2AlC materials having most light-weight and oxidation resistance among the MAX phases. The bulk samples mainly consisted of Ti2AlN and Ti2AlC materials with density close to theoretical value were synthesized by a SPS method. Machining characteristics such as machining time, surface quality are analyzed with measurement of voltage and current waveform according to machining condition of micro-electrical discharge machining with micro-channel shape.

습식흡수제를 이용한 이산화탄소 포집 공정은 재생 시 많은 에너지가 필요한 단점이 있어 에너지를 낮추기 위한 다양한 대체 기술이 개발되고 있다. 이런 연구의 일환으로 최근에 분리막과 흡수제를 혼합하는 접촉막 기술이 개발되고 있으며, 흡수제의 단점을 극복하는 연구가 진행되고 있다. 본 연구에서는 세라믹소재를 이용하여 중공사막을 제조하였고 젖음성을 제어하기 위해 소수성 코팅을 한 중공사막을 개발하였다. 중공사막의 XRD, SEM, FT-IR 및 Porosimeter를 이용하여 분석하였고, 기공에 따른 CO2 분리 특성을 규명하였다.

Physical and chemical changes in a polished wafer and in 2.5μm & 4μm epitaxially grown Si layer wafers (Epilayer wafer) after surface treatment were investigated. We characterized the influence of surface treatment on wafer properties such as surface roughness and the chemical composition and bonds. After each surface treatment, the physical change of the wafer surface was evaluated by atomic force microscopy to confirm the surface morphology and roughness. In addition, chemical changes in the wafer surface were studied by X-ray photoemission spectroscopy measurement. Changes in the chemical composition were confirmed before and after the surface treatment. By combined analysis of the physical and chemical changes, we found that diluted hydrofluoric acid treatment is more effective than buffered oxide etching for SiO2 removal in both polished and Epi-Layer wafers; however, the etch rate and the surface roughness in the given treatment are different among the polished 2.5μm and 4μm Epi-layer wafers in spite of the identical bulk structural properties of these wafers. This study therefore suggests that independent surface treatment optimization is required for each wafer type, 2.5μm and 4μm, due to the meaningful differences in the initial surface chemical and physical properties.

To synthesize a high-performance photocatalyst, N doped TiO2 nanotubes deposited with Ag nanoparticles were synthesized, and surface characteristics, electrochemical behaviors, and photocatalytic activity were investigated. The TiO2 nanotubular photocatalyst was fabricated by anodization; the Ag nanoparticles on the TiO2 nanotubes were synthesized by a reduction reaction in AgNO3 solution under UV irradiation. The XPS results of the N doped TiO2 nanotubes showed that the incorporated nitrogen ions were located in interstitial sites of the TiO2 crystal structure. The N doped titania nanotubes exhibited a high dye degradation rate, which is effectively attributable to the increase of visible light absorption due to interstitial nitrogen ions in the crystalline TiO2 structure. Moreover, the precipitated Ag particles on the titania nanotubes led to a decrease in the rate of electron-hole recombination; the photocurrent of this electrode was higher than that of the pure titania electrode. From electrochemical and dye degradation results, the photocurrent and photocatalytic efficiency were found to have been significantly affected by N doping and the deposition of Ag particles.

본 연구에서는 소수성 PVDF막 표면에 중성 친수성 고분자인 Poly(vinyl alcohol) (PVA)를 코팅한 후 순수 투과도를 측정하고 대표적인 단백질 오염물질인 bovin serum albumin (BSA)에 대하여 파울링 실험을 수행하였다. BSA 용액 20ppm 조건에서 파울링 실험을 수행한 결과, 코팅 전 막에 비하여 순수 투과도는 감소하였지만 내오염성은 현저히 증가됨을 알 수 있었다. 코팅된 PVA의 분자량이 커질수록 순수 투과도는 감소하였으나, 내오염성이 증가하는 경향을 보였다. 또한, 코팅된 PVA의 농도가 높아질수록 순수 투과도는 감소하였고, 내오염성이 증가하였다. 이는 접촉각과 AFM 측정 결과와 관련하여 코팅 후 막 표면에 친수성의 증가와 거칠기가 감소했기 때문으로 여겨진다.

This study was conducted to develop an optimal composite recipe of nutritional cookies containing Chinese artichoke (Stachy sieboldii Miq) powder. Rice powder was partially substituted with Chinese artichoke (Stachy sieboldii Miq) powder to reduce its content. The optimal sensory composite recipe was determined by 3 concentrations of Chinese artichoke (Stachy sieboldii Miq) powder, butter, and sugar, using the central composite design. In addition, the mixing condition of Chinese artichoke (Stachy sieboldii Miq) powder rice cookies was optimized by subjecting the cookies to a sensory evaluation and instrumental analysis using the response surface methodology (RSM). The effects of the addition of the three variables on the quality of Chinese artichoke (Stachy sieboldii Miq) rice powder cookies were assessed in terms of color, hardness, sweetness and sensory evaluation. The results of the sensory evaluation produced values very significant for flavor, texture, sweetness, appearance, and overall quality (p<0.05). The results of instrumental analysis showed significant values in moisture content, spreadability, sweetness (p<0.01), lightness, redness, and hardness (p<0.001). As a results, the optimal sensory ratio of Chinese artichoke (Stachy sieboldii Miq) rice cookies was determined to be Chinese artichoke (Stachy sieboldii Miq) powder 4.22 g, butter 120.00 g, and sugar 130.00 g.

In this study, synthetic viscose rayon fabric has been used for preparing activated carbon fabric (ACF), impregnated with different concentrations of H3PO4. The effect of H3PO4 im-pregnation on the weight yield, surface area, pore volume, chemical composition and mor-phology of ACF were studied. Experimental results revealed that both Brunauer-Emmett-Teller surface area and micropore volume increased with increasing H3PO4 concentration; however, the weight yield and microporosity (%) decreased. It was observed that samples impregnated at 70°C (AC-70) give higher yield and higher microporosity as compared to 30°C (AC-30). The average pore size of the ACF also gradually increases from 18.2 to 19 and 16.7 to 20.4 Å for 30°C and 70°C, respectively. The pore size distribution of ACF was also studied. It is also concluded that the finalACF strength is dependent on the concentra-tion of impregnant.

We measured the grain size and metallics elements (Li, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd, Hg, Pb, Fe and As) of surface sediments collected from 27 sampling sites in the Abalone aquaculture. The concentration range and average value of metallics elements were also below the sediment quality guidelines (TEL). As the pollution level was estimated by using enrichment factor (Ef) and index of geoaccumulation (Igeo), the enrichment factor (Ef) was about 1 for most of metallic elements were smaller than 1. However Arsenic (As) had highest value of 2.35. Index of geoaccumulation (Igeo) for the metallic elements (As, Pb and Mn) were ranged Igeo-class 0 (practically unpolluted) and most metallics elements (Li, V, Cr, Fe, Co, Ni, Cu, Zn, Cd, Hg and Fe) were ranged Igeo-class 0~2, indicating that the pollution levels of metallic elements should not be significant. It is necessary to keep monitoring pollution level in Abalone aquaculture to conserve the blue belt.

본 연구에서는 낙동강 강정고령보 근처에서 2011년 7월부터 2012년 9월까지 1년 이상 관측된 에너지 플럭스 자료의 분석을 통해 강 주변 농경지와 도시에 따른 플럭스 특징을 알아보고 향후 영향평가에 활용 가능한 자료인지 평가하고자 하였다. 연구 대상지는 농경지로 둘러싸인 시골지역과 도시공단 지역에 위치하였다. 현열 및 잠열 플럭스를 풍향에 따라 분석하였다. 여름에 바람이 강쪽에서 불어올 때 두 관측지점 모두 현열은 감소하고 잠열은 증가하는 형태를 보였다. 이는 강으로부터 전달된 수분에 의한 것으로 파악된다. 보웬비, 에너지 수지 닫힘, 운동량 플럭스, 안정도에 대한 분석 또한 이루어졌다. 두 지점간 보웬비를 비교한 결과 전 계절에 걸쳐 도시 지역의 보웬비가 농경지 지역의 보웬비보다 더 높았다. 에너지 수지 닫힘은 도시 지역에서 더 낮게 나타났는데 이는 도시 지역에서 저장항 계산이 배제되었기 때문으로 보인다. 운동량 플럭스는 여름과 겨울 두 계절 모두 도시 지역에서 더 높게 나타났다. 강한 난류를 보이는 주간과 여름에 불안정한 상태가 장시간 지속되었다. 이들 지점에서 관측된 자료는 향후 강이 주변지역에 미치는 영향에 대한 연구에 사용하기 적절한 것으로 보인다.

The purpose of this study was to investigate the antioxidative effects of Mori Cortex Radicis powder and to determine the optimal mixing ratio of Mori Cortex Radicis powder and water in the preparation of bread. The optimal sensory composite recipe was determined by producing bread with different levels of Mori Cortex Radicis powder and water. The analysis was performed using response surface methodology and a sensory evaluation was performed with the data. Ten experimental recipes, including two with reference points in the composition, were selected. In terms of the antioxidative effects of Mori Cortex Radicis powder, the IC50 for total phenolic content and DPPH free radical scavenging activity were 149.56 GAE/g dry powder and 137.77 /mL respectively. Measurement results of the mechanical properties showed differences in volume (p〈0.05), baking loss (p〈0.05), yellowness (p〈0.01), lightness (p〈0.01), redness (p〈0.01), hardness (p〈0.01) and springiness (p〈0.05). The sensory measurements showed significant values for color (p〈0.05), appearance (p〈0.05), flavor (p〈0.01), taste (p〈0.01), and overall quality (p〈0.01). Overall, based on numerical and graphical methods, the optimal formulation was determined to be 21.16 g of Mori Cortex Radicis powder and 372.47 g of water.

목적: 플라즈마 표면처리가 불화규소 아크릴레이트 재질의 RGP 콘택트렌즈의 물리화학적 특성에 미치는 영향을 분석하였다. 방법: RGP 렌즈 표면의 플라즈마 처리는 공기 중 상온에서 200 W로 수행하였으며, 처리시간은 0∼250초로 다르게 하였다. 습윤성을 평가하기 위해 접촉각을 측정하였다. 표면 성분은 X-선광전자분광분석기(XPS)로 관찰하고, 플라즈마 처리에 의한 실리케이트의 형성을 분석하였다. 표면의 형상과 거칠기는 원자현미경(AFM)으로 관찰하였다. 산소침투성의 변화는 전기분해 분석법으로 얻은 렌즈의 투과 전류값과 중심두께를 측정하여 비교하였다. 결과: 플라즈마로 표면 처리되면 초기에 접촉각이 급격히 감소하였으며, 처리되지 않은 표면에 비해 30%까지 감소하였다. 표면 성분의 탄소와 불소는 70% 이하로 감소했으나, 산소와 실리콘은 150% 이상 증가하였다. 표면에서 탄소가 감소하는 형태는 접촉각의 변화와 직접적으로 관계가 있었다. 플라즈마 표면처리에 의해 표면의 탄소와 불소는 휘발하고, 유리된 실리콘이 산소와 결합하여 표면에 친수성 실리케이트(SiOx, x=1.5∼2.0)가 형성되며, 실리케이트는 50% 이상 크게 증가하였다. 플라즈마 처리된 표면에서 원형이나 직각형의 돌출부가 관찰되고, 거칠기(RMS)는 40% 이상 증가하였다. 결론: RGP 콘택트렌즈를 공기 중에서 플라즈마 처리하면 표면에 친수성인 실리케이트가 형성되어 습윤성은 개선되지만 산소침투성에는 영향을 주지 않았다. 습윤성의 증가는 표면형상의 변화보다는 실리케이트의 형성이 더 큰 영향을 준 것으로 판단되었다. 또한 플라즈마 처리에 의해 표면에 국한되어 형성된 실리케이트가 열린 구조를 갖고 있어 산소침투성에 유의한 변화가 없었던 것으로 생각된다.

The relationship the between electrical properties and surface roughness (Ra) of a wet-etched silicon wafer were studied. Ra was measured by an alpha-step process and atomic force microscopy (AFM) while varying the measuring range 10×10, 40×40, and 1000×1000μm. The resistivity was measured by assessing the surface resistance using a four-point probe method. The relationship between the resistivity and Ra was explained in terms of the surface roughness. The minimum error value between the experimental and theoretical resistivities was 4.23% when the Ra was in a range of 10×10μm according to AFM measurement. The maximum error value was 14.09% when the Ra was in a range of 40×40μm according to AFM measurement. Thus, the resistivity could be estimated when the Ra was in a narrow range.

The electrical properties and surface morphology changes of a silicon wafer as a function of the HF concentration as the wafer is etched were studied. The HF concentrations were 28, 30, 32, 34, and 36 wt%. The surface morphology changes of the silicon wafer were measured by an SEM (80˚ tilted at ×200) and the resistivity was measured by assessing the surface resistance using a four-point probe method. The etching rate increased as the HF concentration increased. The maximum etching rate 27.31 μm/min was achieved at an HF concentration of 36 wt%. A concave wave formed on the wafer after the wet etching process. The size of the wave was largest and the resistivity reached 7.54 ohm·cm at an 30 wt% of HF concentration. At an HF concentration of 30 wt%, therefore, a silicon wafer should have good joining strength with a metal backing as well as good electrical properties.

In order to determine the wear properties of CVD ceramic coatings, wear process was evaluated using the coated pin of Falex Tribosystem. Also, in order to determine the effects of coating material on wear process, TiC,N of thickness 5m∼6m coated by Thermal CVD method were applied. The wear property of TiC,N film, the higher the deposition temperature was, the closer the lattice parameter was to the amount of the standard power, and the grain size increased. According to the wear formation, under the control that there is on specific wear rate wear parameter and coating delamination, decrease with increasing sliding friction and when the coating delamination happened.

본 논문에서는 주파수 선택적 투과막(FSS)이 결합된 복합재료 구조에서 구성 재료 간의 열팽창계수 차이로 잔류응력이 발생하므로 이로 인한 층간분리나 FSS의 손상 등 구조적인 파손 가능성과 잔류응력으로 인하여 변형된 FSS가 전파투과특성에 미치는 영향에 대하여 연구하였다. FSS는 단위요소의 종류, 설계변수, 배열에 따라 전파특성이 다르게 나타나므로, PSO 알고리즘을 이용하여 다이폴이 목표주파수에서 투과특성을 갖도록 설계하고 그 설계치수를 다른 N-pole 종류 단위요소(Tripole, Cross dipole, Jerusalem cross)에 적용하여, 복합재료 구조에 발생하는 잔류응력과 그로인한 구조적 손상과 전파특성을 영향성을 관찰하고 FSS패턴과 복합재료의 적층 변화에 따라 비교하였다.

PURPOSES : Skid resistance on pavements plays an important role in reducing the risk of vehicle skidding on wet surface particularly. Almost 9.3 percent of traffic accidents were occurred under rainy condition and these are over-represented in terms of the severity of the crashes. Recently, unusual weather conditions referred widely as the intensified rainfalls justify the need of a systematic management of skid resistance. In this context, the study carried out the observational study on the skid resistance characteristics of different types of pavement with the time passage. METHODS : This study measured the skid resistance with Pavement Friction Tester at three times within five years. The skid resistance measurement has followed the method suggested by ASTM. RESULTS : As the main results under the scope of this study, skid resistance of asphalt concrete has not nearly reduced with time. On the contrary, skid resistance of cement concrete has been rapidly reduced with time though the highest resistance was gained at the early observation. Porous asphalt concrete shows a steady decrease of skid resistance with time, anyway, the reduction rate according to the increase of measurement speeds is relatively lower than the others. CONCLUSIONS : Based on our study, skid resistance of the pavement should be regarded as one of the pavement management system, so periodic measurement should be made to assure road safety as a whole.

선박 구조재료 FRP 재료의 대체 재료로 빠른 선속과 선적량 증가는 물론 재활용이 용이한 Al 선박으로 전환되고 있다. 본 논문에서는 인장실험을 통해 레저선박에 사용되는 5456-H116 합금에 대한 최적의 마찰교반용접 조건에서 프루브 직경의 효과를 기술하였다. 마찰교반용접에서 이송속도, 회전속도를 변수로 5 mm의 프루브 직경을 사용하여, 이송속도가 61 mm/min의 조건에서 가장 우수한 결과를 나타냈다. 프루브 직경 6 mm, 회전속도 170-210 rpm, 이송속도 15 mm/min 에서는 낮은 회전속도로 인하여 불충분한 용접열이 발생하여 거친 표면과 기공이 형성 되었다. 회전속도 500-800 rpm인 경우, 용접부에 칩이 관찰되었으며, 기공은 생기지 않았고, 용접표면은 우수하였으나 1100-2500 rpm에서는 지나친 용접열의 발생으로 많은 칩이 발생하였다. 열에 의한 영향은 용접 배면에서 관찰되었다. 이송속도가 15 mm/min에서 회전속도의 증가하게 되면 마찰이 증가함에 따라 용접열이 발생한다. 기계적 특성은 용접 입열량이 증가할수록 재질의 연화가 가속화되어 저하하였다.

The aim of this study was to evaluate surface character¬istics and biological properties of the dentin -derived hydroxyapatite (HA) coating on titanium substrate. Dentin-derived HA was obtained from extracted human teeth using a calcination method at 850℃. The commercially pure titanium (cp-Ti, ASTM Grade II) was used as a metallic substrate and a radio frequency magnetron sputtering method was employed as a coating method. Scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX) were utilized to investigate the coating aspects and composition. Atomic forced microscopy (AFM) and a surface profiler were used to assess the surface morphology and roughness. Corrosion tests were performed in phosphate- buffered saline at a 36.5 ± 1℃ in order to determine the corrosion behavior of the uncoated and coated specimens. The biocompatibility of dentin-derived HA coated specimens with fetal rat calvarial cells and human gingival fibroblasts was assessed by SEM and cell prolif¬eration analysis. The results showed that the dentin-derived HA coatings appeared to cover thinly and homogeneously the surfaces without changing of the titanium substrate. The EDX analysis of this the coating surface indicated the presence of Ca and P elements. The mean surface roughness of cp-Ti and dentin-derived coating specimens was 0.27 µm and, 1.7 µm, respectively. Corrosion tests indicated a stable passive film of the dentin-derived HA coating specimens. SEM observations of fetal rat calvarial cells and human fibroblast cells on coated surfaces showed that the cells proliferated and developed a network of dense interconnections. The cells on all specimens proliferated actively within the culture period, showing good cell viability. At day 1 and 3, dentin-derived coating specimens showed 89% and 93% cell viability, respectively, when normalized to cp-Ti specimens. These results suggest that dentin-derived HA coating using the RF magnetron sputtering method has good surface characteristics and biocompatibility.