본 연구는 8월에 한반도를 우회하며 동해상으로 빠져나간 2018년 제 19호 태풍 Soulik과 서해상으로 북진하여 통과한 2020년 제 8호 태풍 Bavi을 통해 태풍 유입 전‧후에 따른 한반도 해역별 수온 변동성을 분석하였다. 분석자료는 국립수산과학원 실시간 수온 자료와 수온관측소 근처 AWS의 바람자료 및 NOAA/AVHRR 위성 수온자료를 활용하였다. 분석 결과 이동경로가 다른 태풍이 한반도를 통과할때 동해에서는 풍속과 풍향에 따라 수온의 상승(북풍)과 하강(남풍)이 반복적으로 발생하였는데 특히 태풍 Soulik 유입 시 10 ℃ 안팎의 급격 한 수온 하강을 보였다. 서해는 태풍 Bavi의 중심부가 통과되면서 서해 일부 해역에서 수온이 상승되었고, 차가운 물덩어리가 존재했던 남 해 일부 해역에서도 태풍 Bavi의 이동으로 따뜻한 수온이 유입되어 평년 수온으로 회복된 것으로 나타났다. 또한 태풍 유입시 서해와 남해 는 지형적‧환경적 조건으로 인해 각 해역별 특성에 맞게 수온 변동이 다르게 나타났다. 본 연구를 통해 태풍으로 인한 한반도 해역별 수 온 변동을 해석함으로써 이상기후에 따른 양식 생물의 부정적인 영향을 최소화하고 해역별 수산재해의 피해대응 전략을 수립하는데 기여 할 것으로 사료된다.

Organoleptic parameters such as color, odor, and flavor influence consumer perception of drinking water quality. This study aims to evaluate the taste of the selected bottled and tap water samples using an electronic tongue (E-tongue) instead of a sensory test. Bottled and tap water's mineral components are related to the overall preference for water taste. Contrary to the sensory test, the potentiometric E-tongue method presented in this study distinguishes taste by measuring the mineral components in water, and the data obtained can be statistically analyzed. Eleven bottled water products from various brands and one tap water from I city in Korea were evaluated. The E-tongue data were statistically analyzed using multivariate statistical tools such as hierarchical clustering analysis (HCA), principal component analysis (PCA), and partial least squares discriminant analysis (PLS-DA). The results show that the E-tongue method can clearly distinguish taste discrimination in drinking water differing in water quality based on the ion-related water quality parameters. The water quality parameters that affect taste discrimination were found to be total dissolved solids (TDS), sodium (Na+), calcium (Ca2+), magnesium (Mg2+), sulfate (SO4 2-), chloride (Cl-), potassium (K+) and pH. The distance calculation of HCA was used to quantify the differences between 12 different types of drinking water. The proposed E-tongue method is a practical tool to quantitatively evaluate the differences between samples in water quality items related to the ionic components. It can be helpful in quality control of drinking water.

Recently, the International Maritime Organization is strengthening regulations for ships operating in polar regions. Hence, insulated multi-core tubes as components for vessels operating in extreme cold need to be investigated in various aspects. Furthermore, the demand for research on electric propulsion vessels is also increasingly growing. Thus, to utilize a 4-core insulated multi-core tube with glass wool as insulation, which was previously developed for ships operating in polar regions, as a water-cooled electrical cable, this study conducted an experiment on the temperature change when water at normal temperature 25℃ was supplied as a coolant under the overcurrent varied from 10A to 25A. As a result, the temperature increase of the core in 10A condition was 3.3℃, but it increased to 13.05℃ in the 25A condition. This showed that a temperature difference of approximately 9.75℃ occurred according to the overcurrent load. However, the coolant inlet and outlet temperatures were relatively uniform around 1℃ in all conditions. This suggests that increasing the residence time by proper control of the coolant flow in the future could achieve a higher cooling effect.

In light of recent social concerns related to issues such as water supply pipe deterioration leading to problems like leaks and degraded water quality, the significance of maintenance efforts to enhance water source quality and ensure a stable water supply has grown substantially. In this study, scan statistic was applied to analyze water quality complaints and water leakage accidents from 2015 to 2021 to present a reasonable method to identify areas requiring improvement in water management. SaTScan, a spatio-temporal statistical analysis program, and ArcGIS were used for spatial information analysis, and clusters with high relative risk (RR) were determined using the maximum log-likelihood ratio, relative risk, and Monte Carlo hypothesis test for I city, the target area. Specifically, in the case of water quality complaints, the analysis results were compared by distinguishing cases occurring before and after the onset of "red water." The period between 2015 and 2019 revealed that preceding the occurrence of red water, the leak cluster at location L2 posed a significantly higher risk (RR: 2.45) than other regions. As for water quality complaints, cluster C2 exhibited a notably elevated RR (RR: 2.21) and appeared concentrated in areas D and S, respectively. On the other hand, post-red water incidents of water quality complaints were predominantly concentrated in area S. The analysis found that the locations of complaint clusters were similar to those of red water incidents. Of these, cluster C7 exhibited a substantial RR of 4.58, signifying more than a twofold increase compared to pre-incident levels. A kernel density map analysis was performed using GIS to identify priority areas for waterworks management based on the central location of clusters and complaint cluster RR data.

This study investigated ethopabate (EPB) residues in edible tissues of broiler chickens given in drinking water and established the withdrawal time (WT) of EPB in poultry tissues. Twenty-four healthy Ross broiler chickens were orally administered with EPB at the concentration of 3.8 mg/L for 14 days (EPB-1, n=24) and 15.2 mg/L for 7 days (EPB-2, n=24) through drinking water, respectively. After the drug treatment, tissue samples were collected from six broiler chickens at 0, 1, 3, and 5 days, respectively. EPB residue concentrations in poultry tissues were determined using LC-MS/MS. Correlation coefficient values ranged from 0.9980 to 0.9998, and the limits of detection and quantification (LOQ) were 0.03~0.09 and 0.1~0.3 μg/kg, respectively. Mean recoveries in muscle, liver, kidney and skin/fat tissues were 95.9~109.8, 108.7~115.3, 89.9~96.6 and 86.7~96.8%, respectively, and coefficient of variations were less than 17.11%. At the end of the drug-administration period (0 day), EPB was detected at levels under the LOQ in all tissues from both the EPB-1 and EPB-2 groups. According to the results of EPB residue in Ross broiler tissues, withdrawal periods of both EPB-1 and EPB-2 in poultry tissues were established to 0 day. In conclusion, the developed analytical method is suitable for the detection of EPB in poultry tissues, and the estimated WT of EPB in poultry tissues will contribute to ensuring the safety of Ross broiler chickens.

From 2020, Korean Animal and Plant Quarantine Agency has reset the withdrawal time (WT) for veterinary drugs typically used in livestock in preparation for the introduction of positive list system (PLS) program in 2024. This study was conducted to reset the MRL for amprolium (APL) in broiler chickens as a part of PLS program introduction. Forty-eight healthy Ross broiler chickens were orally administered with APL at the concentration of 60 mg/L (APL-1, n=24) for 14 days and 240 mg/L (APL-2, n=24) for 7 days through drinking water, respectively. After the drug treatment, tissue samples were collected from six broiler chickens at 0, 1, 3 and 5 days, respectively. Residual APL concentrations in poultry tissues were determined using LC-MS/MS. Correlation coefficient (0.99 >), the limits quantification (LOQ, 0.3~5.0 μg/kg), recoveries (81.5~112.4%), and coefficient of variations (<15.5%) were satisfied the validation criteria of Korean Ministry of Food and Drug Safety. In APL-1, APL in all tissues except for kidney was detected less than LOQ at 3 days after drug treatment. In APL-2, APL in liver and kidney was detected more than LOQ at 5 days after treatment. According to the European Medicines Agency’s guideline on determination of withdrawal periods, withdrawal periods of APL-1 and APL-2 in poultry tissues were established to 3 and 2 days, respectively. In conclusion, the developed analytical method is sensitive and reliable for detecting APL in poultry tissues. The estimated WT of APL in poultry tissues is longer than the current WT recommendation of 2 days for APL in broiler chickens.

새만금호는 우리나라 최대의 인공호수로 호수의 수질은 갈수록 악화되어 가고 있어 호수의 특성에 맞는 새로운 수질관리 대 책이 필요하다. 이에 새만금호의 국가수질측정망 자료를 이용하여 통계분석 기법에 의한 새만금호의 시공간적 수질특성을 분석하였다. 수질항목간의 상관성에서 수온과 TP는 상관성이 있고, 염분과 TN, 그리고 pH와 COD가 상관성이 높았다. 그 외 항목들 간에는 낮은 상관 성을 나타내어 관련성이 낮았다. 주성분 분석을 이용한 새만금호의 공간적 수질특성을 보면, 크게 4개의 그룹으로 구분되었는데, 담수 영 향구역과 해수 영향구역, 해수와 담수가 혼합되는 중간 수역이 2개 그룹으로 구분되어 각각 다른 수질특성을 나타내었다. 주성분분석을 이용한 시간적 수질특성은 계절적으로 4가지 그룹으로 구분되었다. 그룹Ⅰ은 늦봄과 초여름에 해당되는 5, 6월이고, 그룹 Ⅱ는 계절적으 로 초봄(3, 4월)과 늦가을(11, 12월)에 해당되는 시기로 나타났으며, 그룹 Ⅲ은 낮은 수온에 의한 용존산소의 증가가 나타나는 계절인 겨울 철(1, 2월)의 수질 특성을 보였고, 그룹 Ⅳ는 하계(7, 8, 9, 10월) 성층의 발달로 저층 퇴적물의 높은 인농도와 하계 고수온의 상관성을 가지 는 그룹으로 구분되었다. 이는 새만금호가 인위적으로 조성된 호수로써 상류 만경강과 동진강의 유입 영향을 받는 것과 동시에 새만금 방조제에 설치된 가력과 신시갑문을 통한 외해수 유입의 영향을 받음으로써 수질의 변동요소가 달라진 것으로 평가된다. 새만금호의 목 표수질을 달성하기 위해서는 상류 유역의 오염원 관리 대책과 함께 새만금호의 수질관리 대책을 수립할 필요가 있다.

This study attempted to analyze the comparative advantage in terms of disaster safety costs in verifying the effectiveness and economic feasibility of the high-performance water-bulwark system in the pole tunnel, which was recently promoted as a part of the acceleration of vehicles. The tunnel to be analyzed was divided into a short tunnel(Anyang, Cheonggye) and a long tunnel(Suraksan, Sapaesan). As a result, it was analyzed that 25% of the improvement effect would occur if one lane was secured by applying the Water-Bulwark System. It was analyzed that this is because the time value cost, which accounts for a large proportion of the traffic congestion cost of short tunnels and pole tunnels, differs depending on the congestion time and traffic volume, not the length of the tunnel.

Surface water temperature of a bay (from the south to the north) increases in spring and summer, but decreases in autumn and winter. Due to shallow water depth, freshwater outflow, and weak current, the water temperature in the central to northern part of the bay is greatly affected by the land coast and air temperature, with large fluctuations. Water temperature variations are large in the north-east coast of the bay, but small in the south-west coast. The difference between water temperature and air temperature is greater in winter and in the south-central part of the bay than that in the north to the eastern coast of the bay where sea dykes are located. As the bay goes from south to north, the range of water temperature fluctuation and the phase show increases. When fresh water is released from the sea dike, the surrounding water temperature decreases and then rises, or rises and then falls. The first mode of empirical orthogonal function (EOF) represents seasonal variation of water temperature. The second mode represents the variability of water temperature gradient in east-west and north-south directions of the bay. In the first mode, the maximum and the minimum are shown in autumn and summer, respectively, consistent with seasonal distribution of surface water temperature variance. In the second mode, phases of the coast of Seosan~Boryeong and the east coast of Anmyeon Island are opposite to each other, bordering the center of the deep bay. Periodic fluctuation of the first mode time coefficient dominates in the one-day and half-day cycle. Its daily fluctuation pattern is similar to air temperature variation. Sea conditions and topographical characteristics excluding air temperature are factors contributing to the variation of the second mode time coefficient.

Bentonite, a material mainly used in buffer and backfill of the engineering barrier system (EBS) that makes up the deep geological repository, is a porous material, thus porewater could be contained in it. The porewater components will be changed through ‘water exchange’ with groundwater as time passes after emplacement of subsystems containing bentonite in the repository. ‘Water exchange’ is a phenomenon in which porewater and groundwater components are exchanged in the process of groundwater inflow into bentonite, which affects swelling property and radionuclide sorption of bentonite. Therefore, it is necessary to assess conformity with the performance target and safety function for bentonite. Accordingly, we reviewed how to handle the ‘water exchange’ phenomenon in the performance assessment conducted as part of the operating license application for the deep geological repository in Finland, and suggested studies and/or data required for the performance assessment of the domestic disposal facility on the basis of the results. In the previous assessment in Finland, after dividing the disposal site into a number of areas, reference and bounding groundwaters were defined considering various parameters by depth and climate change (i.e. phase). Subsequently, after defining reference and bounding porewaters in consideration of water exchange with porewater for each groundwater type, the swelling and radionuclides sorption of bentonite were assessed through analyzing components of the reference porewater. From the Finnish case, it is confirmed that the following are important from the perspective of water exchange: (a) definition of reference porewater, and (b) variations in cation concentration and cation exchange capacity (CEC) in porewater. For applying items above to the domestic disposal facility, the site-specific parameters should be reflected for the following: structure of the bedrock, groundwater composition, and initial components of bentonite selected. In addition, studies on the following should be required for identifying properties of the domestic disposal site: (1) variations in groundwater composition by subsurface depth, (2) variations in groundwater properties by time frame, and (3) investigation on the bedrock structure, and (4) survey on initial composition of porewater in selected bentonite The results of this study are presumed to be directly applied to the design and performance assessment for buffer and backfill materials, which are important components that make up the domestic disposal facility, given the site-specific data.

Though many treatment technologies of contaminated water have been developed for a long time, it is still difficult to find a suitable method for large volumes of low radioactivity tritium-contaminated water. For this reason, most of the tritium-contaminated water been discharged to the biosphere or been stored in a special control area as radioactive waste. Activated carbon is a common material, but since there are few data on the treatment of tritium-contaminated water, its adsorption behavior to HTO is worth studied. In our study, for the tritium-contaminated water having a low radioactivity concentration (350-480 Bq/g), adsorption experiments were performed with activated carbon. The effects on the selective adsorption of HTO were investigated for temperature (5-55°C), hydrogen peroxide (1-10wt%) and activated carbon reuse (1-6 times) under non-equilibrium conditions. The treatment of activated carbon significantly reduced the radioactivity of tritium-contaminated water around 60 minutes of adsorption time. In order to clearly analyze the experimental results, positive factors and negative factors on the HTO selectivity were separately evaluated according to the adsorption time. Temperature and the reuse of activated carbon were evaluated as negative factors for HTO selectivity of activated carbon, whereas hydrogen peroxide (> 5wt%) was evaluated as a positive factor. By the evaluation method of separating the influencing factors into two types, the adsorption experimental results of HTO could be understood more clearly.

PURPOSES : The increasing heat wave warnings during the summer season in Korea have significant impacts on daily life and industry as a whole, especially in urban areas (such as areas with asphalt and sidewalk pavements). Heat waves directly affect urban heat island and heat dome phenomena. Various urban temperature reduction measures are being discussed to reduce urban heat islands and heat dome phenomena and to improve citizen safety against summer heat waves; suggestions include thermal packaging, rooftop greening, and expansion of vegetation areas. There is a lack of analysis on the methodology for increasing the road spraying effect during summer heat waves (e.g., there is no systematic engineering study on the effect from reducing the temperature of the road spraying during a heat wave in the city) and on the types of road pavements in the city. In addition, as the asphalt pavements of roadways and block pavements installed in sidewalks account for a considerable portion of all pavements, this study provides a more systematic and scientific approach and procedures for reducing temperatures through road spraying in the city by tracking the effects of heat waves. METHODS : In this preliminary experiment, four types of road pavement materials were selected as test specimens: asphalt test specimens (AP- 300 mm × 300 mm × 50 mm), concrete test specimens (CP-300 mm × 300 mm × 50 mm), impermeable blocks (IB-200 mm × 200 mm × 60 mm), and self-permeable blocks (PB-200 mm × 200 mm × 60 mm). As a test method to evaluate the size and duration of each spray effect package type, the surface temperature of each specimen was measured using thermal imaging cameras every 20 min after spraying at the maximum temperature point of each specimen, and the average surface temperature was analyzed based on the collected temperature data. In addition, to conduct a quantitative analysis of the effect of reducing the surface temperature of road pavements by road spraying in summer, field tests were conducted on asphalt roads and watertight blocks for sidewalks. RESULTS : As a result of the comparative analysis of the spray effect under a 36 ℃ air temperature based on a heat wave warning, the surface temperatures were, from high to low, the asphalt (68.8 ℃), concrete (59.1 ℃), impermeable block (57.3 ℃), and permeable block (58.7 ℃). The asphalt pavement had the greatest effect on the heat island and heat dome phenomena. From measuring the temperature reduction effect and sustainability of each type of road pavement, the surface temperature reduction effects were ranked in the following order: water-permeable block (Δ18.0 ℃), asphalt test piece (Δ17.5 ℃), concrete test piece (Δ12.2 ℃), and water-permeable block (over 240 min). In the report pitching block, the average road surface temperature reduction between the pore recovery and treatment was expected to continue to decrease by approximately -4.3 ℃ on the day of work and approximately -2.4 ℃ on the next day. The expected effect of the temperature reduction owing to simple spraying on the surface of the pore block was evaluated to be limited to the day. CONCLUSIONS : In the road spray effect analysis conducted on the common asphalt road, there was a slight difference in the initial temperature reduction size as the test specimen was measured, but the surface temperature difference between the non-spray section and spray section tended to be approximately Δ3°C after 140 minutes of spraying. Therefore, it was determined that the asphalt pavement temperature reduction plan through road spraying in urban areas in summer would be the most effective if it was repeated twice or more in an hour (between 13:00 and 14:00) on the day of the heat wave.

An estuary is a water ecosystem with a high abundance of the species diversity, due to a variety of complex physicochemical factors of the area where freshwater and ocean mixed. The identification of Corbicula species in the estuary environments is difficult because of various morphological characteristics. In this study, we provide taxonomic information on Corbicula species with taxonomic difficulties using morphological and genetic analysis. This study was conducted on clams from the Seomjin River-Gwangyang Bay, one of the major production area of marsh clam in Korea. As a result, we characterized Cytocrome C Oxidase subunit I (COI) sequences of the Corbicula. The 636 bp nucleotide sequences of COI have 98% homology among Corbicula species collected from 2 sites of Seomjin River-Gwangyang Bay. The phylogenetic analysis with 17 species of Corbicula indicated that most of the species collected from Seomjin River-Gwangyang Bay were brackish water clam (Corbicula japonica), and only one Asian clam (Corbicula fluminea). The evolutionary distance between C. japonica and C. fluminea was less than 0.003. Therefore, it was confirmed that C. japonica is phylogenetically closely related to C. fluminea. In 9 species of Cyrenidae, phylogenetic tree was classified into three lineages. These results will be used as an important data for an identification of clam species by providing genetic information for Corbicula species with a morphological diversity. Key words: Corbicula japonica, cytochrome c oxidase subunit I (

The macroinvertebrate community in the Singal reservoir, Yedang and Juam lake was investigated three times from April 2021 to October 2021. Each lake was investigated by dividing it into inflow, middleflow, and outflow. Additionally, sampling was conducted again by dividing it into the edge and center parts at each inflow, middle-flow, and outflow. Eight families of benthic macroinvertebrates were collected except for chironomids in the sampling sites. Dominant macroinvertebrates were investigated as chironomids, and Tubificidae was sub-dominant organisms. The density of macroinvertebrate community was higher in the edge area than in the center bottom of the lakes. The density of chironomids was low when the water level was high but was high when the water level was low. In the edge area of the middle-flow in Singal reservoir, the density of chironomids was 1,208 ind. m-2 in April when the water level was high, but it increased to 1,401 ind. m-2 in July when the water level was low. Similarly, the density of chironomids at the outflow of Yedang lake was high (1,990 ind. m-2) in July when the water level was low. The density of chironomids also decreased along with the increasing water level at all edge areas of Juam lake. These results indicated that it will be necessary to consider the water level when studying macroinvertebrate communities in the lake.

높아진 생활수준과 주 5일 근무의 정착으로 여가시간이 증가했고, 이에 따라 물을 이용한 공간 에 대한 관심도 크게 증가하였다. 하지만 급격한 양적 성장이 이루어짐에 따라 물놀이 공간은 대부분 획일화된 시설물과 배치로 조성되어 있으며, 다양한 행태에 대한 지원 또한 미흡한 실정이다. 이에 본 연구에서는 빅데이터를 활용한 실증 데이터를 바탕으로 물놀이 공간 및 시설 물의 이용행태를 분석하고자 하였다. 그 결과, 각 물놀이 시설물이 서로 다른 놀이를 지원하며, 각각 유발되는 놀이의 형태나 이용행태가 상이하다는 결론을 도출하였다. 이에 본 연구는 앞으 로 물놀이 공간 조성 시, 물리적 환경과 이용자 간의 관계를 고려하여 설계할 수 있도록 기본자 료를 제시하고자 하였다.