잎들깨 수경재배 시 적합한 고형배지를 선발하기 위하여 본 연구를 수행하였다. ‘남천’과 ‘소미랑’ 2품종에 대해 코이어 (chip:dust = 5:5), 펄라이트, 입상 암면, 원예용 상토(cocopeat: peatmoss:vermiculite:perlite:zeolite = 50:25:10:10:5) 등 4종의 배지에 따른 배지의 물리화학적 특성 및 생육반응을 분 석하였다. 배지 간의 EC와 pH의 차이는 보이지 않았으나, 용 기용수량 측정 결과 입상 암면이 가장 높고 원예용 상토와 코 이어가 적절한 수준을 유지하였다. 배지의 기상률은 코이어 와 펄라이트가 30% 이상으로 높은 경향을 보였으며 가비중은 코이어 배지를 제외한 모든 배지가 기준을 충족하였다. 잎의 크기는 품종 간에 배지에 따른 반응이 다르게 나타났는데 ‘남 천’ 품종은 원예용 상토에서 엽장, 엽폭이 가장 컸고 ‘소미랑’ 의 경우 코이어에서 재배하였을 때 가장 컸다. 엽중은 두 품종 모두 원예용 상토에서 재배한 것이 가장 높았고, 코이어와 펄 라이트에서 재배한 것이 상대적으로 낮았다. 총 생산량을 조 사한 결과 수량이 높은 원예용 상토 및 입상 암면과 수량이 낮 은 코이어, 펄라이트로 두 그룹으로 구분되는 형태를 보였으 며 그룹 간에 최대 28% 차이를 보였다. 따라서 근권에 충분한 수분 공급이 필요한 잎들깨를 수경재배하기 위해서는 보수력 이 좋은 원예용 상토와 입상 암면을 이용하는 것이 적합할 것 으로 판단한다.

The aim of this study was to investigate dry matter productivity and nitrate nitrogen content in the growth stages of barnyard millet (Echinochloa esculenta) cultivated for feed, which was treated with different nitrogen fertilization levels. An early variety of barnyard millet (cv. Shirohie) was used for the test, and the different treatments with nitrogen fertilizer were as follows: 50% (N-40 kg/ha, T1), 100% (N-80 kg/ha, reference amount, T2), 150% (N-120 kg/ha, T3), 200% (N- 160 kg/ha, T4), 250% (N-200 kg/ha, T5), and 300% (N-240 kg/ha, T6). Sowing was done on May 13, 2021 and plants were harvested for four stage; vegetative stage, elongation stage, heading stage, and milk stage. The length of the millet increased significantly as the amount of nitrogen fertilization increased during the harvest period (p<0.05), but the difference was insignificant during the milk stage (p>0.05). Moreover, barnyard millet dry matter yield increased significantly as the levels of nitrogen fertilization increased (p<0.05), but there was no significant difference in dry matter yield among nitrogen fertilization levels during the heading stage (p>0.05). Chlorophyll also was significantly higher in T5 (250%) at all harvesting times, whereas nitrate nitrogen content was highest at the vegetative stage, gradually decreased as growth progressed, and lowest at the milk stage. Finally, as the nitrogen fertilization levels increased, the nitrate nitrogen content was significantly higher in all treatment groups (p<0.05). Therefore, our results suggest that the most appropriate nitrogen fertilizer levels is between 150%–200%, considering the dry matter yield, feed ingredients and nitrate nitrogen content in barnyard millet for feed.

This study aimed to examine the changes in dry matter yield and growth characteristics of alfalfa (Medicago sativa L.) in response to variations in sowing dates during the autumn season of 2021-22 in a dry paddy field of Chilbo-myeon, Jeongeup-si, Jeollabuk-do. Treatments comprised four sowing dates at 10-day intervals, i.e., October 8, October 18, October 28, and November 8, 2021. The winter survival rate of alfalfa showed a significant difference between different treatments but was at a satisfactory level for all (p<0.05). The winter survival rate for the fourth sowing date, a month later than the first sowing date, was approximately 11.7% lower than that for the first sowing date. The plant height ranged between 82.3–93.1 cm and 60.5–63.7 cm at the first and second harvest, respectively, smaller at the second harvest than at the first harvest. The total dry matter yield of alfalfa was the highest at 13,316 kg/ha for the first sowing date, and the later the sowing date, the lower the dry matter yield. The protein content of alfalfa ranged between 13.6–17.3% in the first harvest, lower than the standard alfalfa protein content of 20% or more. In relative feed value, the first sowing (Oct. 8) was the most significantly higher in the first harvest (p<0.05). These results suggest that the early and mid-October sowing dates are optimum for sowing alfalfa during autumn and result in improved plant growth, dry matter yield, protein content, and winter survival compared to those at later sowing dates. Therefore, dry paddy fields can be safely employed for alfalfa cultivation with sowing dates in early and mid-October during autumn.

This study was carried out to investigate the effects of planting densities on the growth characteristics, dry matter yield, and feed value of “Geukdong 6” (a new variety of corn for feed). The experimental design was arranged in a randomized block design with three replications. Treatments consisted of six planting densities, 60 cm × 25 cm (T1), 60 cm × 30 cm (T2), 70 cm × 25 cm (T3), 70 cm × 30 cm (T4), 80 cm × 25 cm (T5) and 80 cm × 30 cm (T6). All treatments were sown on May 14, 2021, and the harvest was on October 3 (late flowering). Plant length and the number of tillers were the highest in T5 (p<0.05), but the number of leaves and stem diameter were the highest in T6 than in the other treatments (p<0.05). Leaf length, leaf width, and dead leaf were not significantly different among the treatments. Organic matter was highest in T6, and crude protein was highest in T5 (p<0.05). The ether extract was not significantly different among the treatments. Crude fiber, NDF, and ADF were highest in T2 with relatively higher planting density (p<0.05). Calcium and phosphorus were not significantly different among the treatments. TDN content was the highest in T3 (p<0.05). Sugar degree (Brix), fructose, glucose, dextran, isomerose, and inverted sugar were not significantly different among the treatment. Fresh yield, dry matter yield and TDN yield were higher in order of T6 > T5 > T4 > T3 > T2 > T1 (p<0.05). Relatively feed value was higher in order of T3 > T6 > T5 > T1 > T4 > T2 (p<0.05). Based on the above results, planting density could be recommended from 80 cm × 30 cm for efficient production of “Geukdong 6”.

This experiment was conducted to evaluate the growth characteristics and productivity of silage corn varieties developed in Korea. Corn cultivation was carried out using the experimental field in the Pyeongchang campus of Seoul National University (550 m above sea level). There have 10 domestic cultivars (Gwangpyeongok, Dacheongok, Yanganok, Jangdaok, Cheongdaok, Daanok, Sinhwangok, Sinhwangok Ⅱ, Pyeonggangok, and Hwangdaok) with one imported cultivar (P1543) which tested as a control, and randomized block design with three replications. Among the 100-grains weight of the seeds, Dacheongok was the heaviest, and the germination rate for each variety was 74.6% on average, while that of Daanok and Sinhwangok were over 90%. Sinhwangok was the fastest in tasseling and silking date. The number of days required to be silking date was as slow as 85 days in Dacheongok, Cheongdaok and Pyeonggangok, and as fast as 80 days or less in Sinhwangok, Sinhwangok Ⅱ and Hwangdaok. The plant height of P1543 was the highest as 344cm, and Hwangdaok and Daanok were short. In terms of the ratio of ears, Daanok had the highest rate of 60.18%, and Jangdaok and Dacheongok had the lowest. There was no significant difference in dry matter content in stover, but P1543 was generally higher in ear and total dry matter content. The dry matter yield was highest in P1543, and the yield of TDN was significantly higher in P1543 and Yanganok. There was a significant difference in the crude protein content of ears and the dry digestibility of stems (p<0.05), while there was no significant difference in the content of each part or element. Combining the above results, Yanganok was the highest in terms of yield, and Dacheongok, Sinhwangok and Pyeonggangok were also recommended for domestically grown corn varieties in the mountainous regions of Gangwon-do.

Since the first development of the high-yield variety ‘Tongil’ that led to the self-sufficiency of rice production in Korea, plant architecture has improved steadily to increase yield components. The purpose of this study was to analyze the chronicle shift of agronomic traits of high-yield rice, to provide future breeding goals. The culm length increased sharply from 65 cm in the 1970s to 80 cm in the 1990s, and then decreased slightly to 77 cm in the 2010s. The panicle length increased continuously from 22.8 cm in the 1990s, to 24.3 cm in the 2010s. The average number of seeds per panicle increased from 118 in the 1970s, to 142 in the 1990s, and decreased continuously to 119 in the 2010s. The ripening ratio increased from 75% in the 1970s to 83% in the 1980s, and decreased to 77% in the 1990s and after that, held steady at 85%. Thousand-grain weight was lowest in the 1980s at 20.9 g and sharply increased to 25.8 g in the 1990s, and decreased continuously to 23.3 g in the 2010s. The production of high-yield varieties increased significantly from the 1970s from 510 kg/10a to 769 kg/10a in the 2010s.

This study was conducted to diversify the cultivation of mushroom items and develop a competitive variety of Hypsizigus marmoreus. We focused on developing Hypsizigus marmoreus with lower bitterness, likable shape, and high yield. We have collected and tested characteristics of genetic resources from domestic and abroad since 2019. Breeding (2019), characterization (2020), productivity test (2021), and farm demonstration test (2021) have been sequentially conducted. We bred the new variety ‘Yunseul’ with unique traits. The optimal temperature for mycelial and fruit body growth were 22–25oC and 15– 18oC, respectively. It was similar to the control variety (Mangadak-2Ho) in the pileus form (hemispherical shape) and the cultivation period. However, it was thinner and longer than the control variety with the pileus diameter, thickness, stipe diameter, and length being 19.9 mm, 7.0 mm, 9.4 mm, and 86.3 mm, respectively. The effective number of fruit bodies was 47.8 in bottle cultivation, which was more than that of the control variety. The yield was 197.4 g/bottle (1,100 cc), which was 30% higher than the yield of the control variety, 151.9 g/bottle (1,100 cc). The parent and control varieties were also incubated alongside the new variety. The somatic incompatibility line was distinct. The band pattern in the mycelial DNA PCR reaction was different from that of the parent and control varieties, confirming the hybrid species.

This study was carried out to evaluate the seeding date and performance of early maturing rye cultivars for the Dry matter yield (DMY) and nutritive value during 2016 and 2017 in Yeongseo region of Gangwondo, South Korea. The experimental field was designed as a split-plot arrangement. The treatments were two planting dates on September 25 and October 02 as the main plots, and two cultivars of forage rye including Gogu and Koolgrazer as sub-plots. The cultivars were harvested on April 26 at the heading stage of both years. In this experiment, the sowing dates and cultivars of the forage rye did not effect on DMY. The DMY had no significant differences among the cultivars of forage rye and seeding date of both years. Similarly, no significant difference was observed in the DMY of Gogu and Koolgrazer in both seeding date and years. The CP, NDF, ADF, and RFV had no significant differences among the cultivars of forage rye and seeding date of both years. Considering the DMY and nutritive value of the current experiment, seeding of forage rye cultivars Gogu and Koolgrazer on September 25 and October 2 could be used as an recommended seeding date at northern area. In addition, based on the climate characteristics of the region, both cultivars had relatively similar forage yield and quality that makes them to be recommended for cultivation in the region. This study is meaningful in that DMY was first presented in Yeongseo region where there is no cultivation data for forage rye.

The purpose of this study was to evaluate the forage maize varieties and sowing date under wet seasons conditions and determined the effects on yield in Cambodia. In this study, the number of days from sowing to silking was approximately nine longer in May and June than in July, August, and September. The number of days from silking to harvest was seven shorter in May and June than in July, August, and September. The variety with the least decrease in ear height was ‘BT5666’, and the variety with the least decrease in ear height ration was ‘CP888’. On the other hand, in sowing days, ear height ratio decreased in September. The best sowing season in ear length, ear width, number of ears and number of grains per row was in May. In this study, ‘BT5666’ was the variety with significant decrease with a 90% reduction in yield. The results indicate that the yield was high during the sowing period in May and in June because of the appropriate precipitation, temperature, and solar radiation. However, August and September had significantly reduce in yield by high precipitation and low solar radiation.

We investigated the standard cultivation substrate for Sparassis latifolia “Neowul” bred in Jeollabuk-do Agricultural Research and Extension Services. Cultivation characteristics and yield were assessed by varying the kind of sawdust and additives, and the mixing ratio. The cultivation period in larch sawdust was the shortest at 97 days. The yield was excellent (143.6 g). The findings indicated that larch is a tree species appropriate for the cultivation of S. latifolia. When the additives were varied, the yield and productivity (53.1%) were highest (116.6 g) for the wheat bran treatment. Thus, wheat bran would be an additive appropriate for culturing S. latifolia. Concerning the use of different mixing ratios, larch sawdust:beet-pulp:wheat bran ratios of 80:15:5 and 85:10:5 resulted in yields of 114.4 g and 111.4 g, and productivity of 52.5% and 51.8%, respectively. These yield and productivity values were not statistically different. Thus, the standard cultivation substrate for S. latifolia can comprise larch sawdust, beet pulp, and wheat bran at a ratio of 80:15:5 or 85:10:5. The carbon/nitrogen (C/N) ratio assumed to be appropriate for the cultivation of S. latifolia was 184 –223. Pinheading would be difficult below a C/N substrate ratio of 105. Thus, the C/N ratio of the media, as well as the pH, would be vital factors affecting pinheading during S. latifolia cultivation.

본 연구는 2018, 2019, 2020년 논에서의 배수 깊이에 따른 식용(일미찰), 사료용 옥수수(광평옥) 그리고 장류콩(대원콩) 및 나물콩(해품콩)에 대한 생육 특성과 수량 구성요소를 비교 검토하고자 수행하였다. 논의 배수로 폭은 80cm로 고정하고 깊이를 20cm과 40cm로 각각 달리하였다. 연차간에 있어서 일미찰은 간장, 착수고, 이삭무게 이삭착립장 및 이삭 수량이 고도의 유의성이 나타났으며, 광평옥도 일미찰과 유사한 반응을 보였다. 배수로 깊이에서는 40cm가 20cm보다 수량이 고도로 유의하게 높았다. 한편, 연차간 해품콩은 간장, 분지, 꼬투리 수, 미 성숙 종자률, 100립 중 및 종실 수량에 고도의 유의한 차이를 보였다. 반면, 대원콩은 간장, 100립중, 수량간에 고도로 유의하였다. 배수로 깊이 간에는 해품콩과 대원콩의 수량은 통계적 유의한 차이는 나지 않았지만 20cm보다 40cm에서 수량이 약간 높았다. 본 연구 결과 옥수수의 수량은 배수로 깊이에서 따라 통계적인 고도 유한 차이를 보였으나 콩은 통계적인 차이는 나타나지 않았으나 40cm이 20cm보다는 높았다. 한편 콩은 미성숙 종자률은 배수로 깊이에 효과적으로 차이를 보였다. 따라서 논에서 옥수수 또는 콩을 재배시 가장자리에 20cm 배수로 보다는 40cm 배수로 설치를 권장한다.

This study aimed to examine cucumber (Cucumis sativus) varieties adaptive to the desert climate by comparing and analyzing the growth, yield, and water consumption. Two long-sized cucumber varieties, ‘Gulfstream’ and ‘Imea’ and two medium-sized cucumbers, ‘Nagene’ and ‘Sausan’ were cultivated in coir substrate hydroponics under hot and humid greenhouse conditions from March 2 to June 20, 2020. On the 113 DAT, ‘Nagene’ had the longest plant height and the highest internode number. The marketable fruit number per plant was higher in the medium-sized varieties, which had more internode number. The marketable fruit number was 31.3 for ‘Gulfstream’, 30.7 for ‘Imea’, 57.8 for ‘Nagene’, or 56.0 for ‘Sausan’ with no significant difference in total fruit weights per plant. The water consumption required to produce 200 g of fruit was lower in the ‘Nagene’ (2.39 L) with the highest water use efficiency (WUE). Therefore, ‘Nagene’ variety may have higher adaptability to desert high temperature compared to the long-sized varieties, and it is going to be necessary to verify more medium-sized cucumber varieties.

This study was carried out to evaluate the growth characteristics and forage yield potential for warm season grass as emergency forages. The experimental design was a randomized block design (RBD) with three replications. Two barnyard millet (Echinochloa species cv. Shirohie and Jeju native), a pearl millet (Pennisetum glaucum cv Feed milk 2) a proso millet (Panicum miliaceum cv Native), a teffgrass (Eragrostis tef cv. Tiffany) and a kleingrass (Panicum coloratum cv. Selection 75) were compared for forage production and quality at the Mid regions of Korea. Warm season forage crops were sown on May 21 and June 23 respectively, and in 2021, it was sown twice on May 21 and June 21 The number of days to seedling emergence for barnyard millet and teffgrass was observed approximately 10 and 3 days after seeding, respectively. The cultivation period from seeding to harvest was within 60 days for all entry spices except for the late-heading type barnyard millet (within 84 days). As for the dry matter yield by seeding date, the dry matter yield of the late-heading type barnyard millet in May seeding was the highest at 23,872 kg/ha, and the kleingrass was the lowest at 3,888 kg/ha. For the June seeding, the dry matter yield of the late-heading type barnyard millet was 17,032 kg/ha, the highest, and the proso millet, teffgrass and kleingrass showed the lowest at 5,468, 5,442, and 5,197 kg/ha, respectively. The crude protein (CP) content was varied by warm season grass species, but the early-heading type barnyard millet, teffgrass, and kleingrass showed the highest tendency, and the late-heading type barnyard millet showed the lowest at 5.7~5.9%. Neutral detergent fiber (NDF) and acid detergent fiber (ADF) content did not show a significant difference between the seeding in May, but kleingrass in June sowed lower than the others.

This study was conducted to examine the dry matter yield and weed control of alfalfa according to postemergence herbicides treatment during spring seeding alfalfa. The seeding time of alfalfa was April 21, 2021, the seeding amount was 20 kg/ha, and the seeding method was by 20 cm wide. The alfalfa harvest was carried out at the early bloom stage (10% of flowering), and the harvest date was June 29, 2021. The test treatments were non herbicide (NH), hand weeding (HW), herbicide 1 (Trifluralin, H1), herbicide 2 (S-metolachlor, H2), herbicide 3 (Alachlor, H3), and herbicide 4 (Pendimethalin, H4). Alfalfa plant height was significantly highest in H2 (62.1±1.4 cm) followed by H3 (61.7±1.6 cm), HW (58.5±1.0 cm), H1 (57.2±1.3 cm), H4 (56.1±1.3 cm), and NH (54.1±1.2 cm) (p<0.05). Based on HW, H2 and H3 were high and H1 and H4 were short, but NH was significantly shorter than HW and H1~H4 (p<0.05). The dry matter yield of alfalfa in NH, HW, H1, H2, H3, and H4 were 717.2±94.2, 2,613.8±254.1, 1,667.8±94.1, 2,498.3±120.2, 2,435.0±118.3, and 1,793.7±354.3 kg/ha. HW is the highest among them (p<0.05). The feed composition of alfalfa was 22~24% of the dry matter yield, and the CP content were significantly higher in NH (23.6 %) (p<0.05). The NH had higher (p<0.05) NDF and ADF, but RFV was lower (p<0.05). The weed plant height was NH 98.0±3.3cm, HW 73.3±1.7 cm, H1 91.9±1.5 cm, H2 53.3±5.8 cm, H3 81.4±3.5 cm and H4 96.6±2.2 cm, and H2 was significantly smallest in the group (p<0.05). The weed dry matter yield was NH 4,770.4±232.5 kg/ha, HW 316.3±91.9 kg/ha, H1 2,353.4±173.7 kg/ha, H2 114.5±10.2 kg/ha, H3 752.7±440.6 kg/ha and H4 2,220.6±775.6 kg/ha. The weed control value was HW 94.1%, H1 53.5%, H2 98.2%, H3 84.9%, H4 48.7%, the weed value of H2 is similar to weed control value of HW. Considering the above results, postemergence herbicide treatment controlled weeds by more than 50% compared with no treatment, and among herbicides, H2 (S-metolachlor) was found to be on a similar level to hand weeding.

This study was carried out to compare the DMY (dry matter yield) of IRG (Italian ryegrass) in the southern coastal regions of Korea due to seasonal climate scenarios such as the Kaul-Changma (late monsoon) in autumn, extreme winter cold, and drought in the next spring. The IRG data (n = 203) were collected from various Reports for Collaborative Research Program to Develop New Cultivars of Summer Crops in Jeju, 203 Namwon, and Yeungam from the Rural Development Administration (1993 – 2013). In order to define the seasonal climate scenarios, climate variables including temperature, humidity, wind, sunshine were used by collected from the Korean Meteorological Administration. The discriminant analysis based on 5% significance level was performed to distinguish normal and abnormal climate scenarios. Furthermore, the DMY comparison was simulated based on the information of sample distribution of IRG. As a result, in the southern coastal regions, only the impact of next spring drought on DMY of IRG was critical. Although the severe winter cold was clearly classified from the normal, there was no difference in DMY. Thus, the DMY comparison was simulated only for the next spring drought. Under the yield comparison simulation, DMY (kg/ha) in the normal and drought was 14,743.83 and 12,707.97 respectively. It implies that the expected damage caused by the spring drought was about 2,000 kg/ha. Furthermore, the predicted DMY of spring drought was wider and slower than that of normal, indicating on high variability. This study is meaningful in confirming the predictive DMY damage and its possibility by spring drought for IRG via statistical simulation considering seasonal climate scenarios.

This study aimed to determine the photosynthesis and growth characteristics of Peucedanum japonicum T. grown under aquaponics in a plant factory (AP) by comparing those grown under hydroponic cultivation system (HP). The AP system raised 30 fishes at a density of 10.6 kg·m-3 in a 367.5 L tank, and at HP, nutrient solution was controlled with EC 1.3 dS·m-1 and pH 6.5. The pH level ranged from 4.0 to 7.1 for the AP system and 4.0 to 7.4 for the HP system. The pH level in the AP began to decrease with an increase in nitrate nitrogen (NO3-N) and lasted bellower than pH 5.5 for 15–67 DAT. It was found that ammonium nitrogen (NH4-N) continued to increase even under low pH conditions. EC was maintained at 1.3 to 1.5 dS·m-1 in both systems. The concentration of major mineral elements in the fish tank was higher than that of the hydroponics, except for K and Mg. There was no significant difference in the photosynthesis characteristics, but the PIABS parameters were 30.4% lower in the AP compared to the HP at the 34DAT and 12.0% lower at the 74DAT. There was no significant difference in the growth characteristics, but the petiole length was 56% longer in the leaf grown under the AP system. While there was no significant difference in the fresh and dry weights of leaf and root, the leaf area ratio was 36.43% higher in the AP system. All the integrated results suggest that aquaponics is a highly-sustainable farming to safely produce food by recycling agricultural by-products, and to produce Peucedanum japonicum as much as hydroponics under a proper fish density and pH level.

본 연구는 기계학습을 통한 수량예측모델을 이용하여 이상기상에 따른 WCM의 DMY 피해량을 산출하기 위한 목적으로 수행하였다. 수량예측모델은 WCM 데이터 및 기상 데이터를 수집 후 가공하여 8가지 기계학습을 통해 제작하였으며 실험지역은 경기도로 선정하였다. 수량예측모델은 기계학습 기법 중 정확성이 가장 높은 DeepCrossing (R2=0.5442, RMSE=0.1769) 기법을 통해 제작하였다. 피해량은 정상기상 및 이상기상의 DMY 예측값 간 차이로 산출하였다. 정상기상에서 WCM의 DMY 예측값은 지역에 따라 차이가 있으나 15,003~17,517 kg/ha 범위로 나타났다. 이상기온, 이상강수량 및 이상풍속에서 WCM의 DMY 예측 값은 지역 및 각 이상기상 수준에 따라 차이가 있었으며 각각 14,947~17,571 kg/ha, 14,986~17,525 kg/ha 및 14,920~17,557 kg/ha 범위로 나타났다. 이상기온, 이상강수량 및 이상풍속에서 WCM의 피해량은 각각 –68~89 kg/ha, -17~17 kg/ha 및 – 112~121 kg/ha 범위로 피해로 판단할 수 없는 수준이었다. WCM의 정확한 피해량을 산출하기 위해서는 수량예측모델에 이용하는 이상기상 데이터 수의 증가가 필요하다.

본 연구는 객토를 한 간척지에서 석고시용 수준이 알팔파의 수량과 사료성분에 미치는 영향을 알아보고자 수행하였다. 실험장소는 간척한지 17~33년 경과된 석문간척지로서 약 70 cm 정도 객토한 토양이었다. 객토에 사용한 흙은 섬토양의 제염을 하지 않은 것 이었다. 처리는 석고를 시용하지 않은 0 ton/ha 구(G0), 석 고를 2 ton/ha(G2) 및 4 ton/ha(G4) 시용한 구로 하였다. 수확은 알팔파가 개화초기(개화 10%)에 도달할 때 1차 수확하였으며 이 후 수확은 약 35일 간격으로 수확을 하였다. 알팔파의 건물수량은 1차 년도는 G2가 G0와 G4보다 유의적으로 높았으며 2차 년도는 처리간 유의적인 차이는 없었으나 G2가 G0와 G4보다 높은 경향을 보였다. G2에서 알팔파의 건물수량이 높은 이유는 토양의 pH 및 EC가 각각 재배가능 및 재배적합 수준이었고 피복도 및 알팔파 식생비율도 높은 것에 기인하였다. 1차 및 2차 년도 모두 석고 처리 간 CP, NDF 및 ADF 함량 및 RFV는 차이가 없었다. 한편 1차 및 2차 년도의 연구결과를 통해서 알팔파 건물수량에 부정적인 영향을 주는 요인은 봄의 가뭄과 여름의 집중된 강수로 나타났다. 이상으로부터 객토 간척지에서 석고 처리는 알팔파의 건물수량을 높이는데 효과적인 것으로 판단되며 2 ton/ha이 적정 수준인 것으로 사료된다.

본 연구는 우리나라 소나무림을 대상으로 지위지수를 기반으로 한 잠재수확량을 예측하여 직관적인 임분 생산력 지표를 제시하고자 하였다. 분석 자료는 2016~2019년에 실시한 제7차 국가산림자원조사(National Forest Inventory: NFI)와 2016~2017년에 실시한 전국 소나무 실태조사 (Korea forest service, 2016; Korea forest service, 2017)를 통해 획득된 총 1,610 표본점 조사자료를 이용하였다. 지위지수 분류곡선과 임분밀도관 리도를 이용하여 각 표본점의 지위 추정 및 기준임령 60년에 대한 생장예측을 실시하여 수확이 예상되는 평균 흉고직경과 임분재적을 추정하였다. 분석 결과, 예측된 재적 수확량은 전체 표본점 중 80.9%가 150~300m3 ha-1의 재적 수확이 가능한 것으로 분석되었고, 300m3 ha-1이상의 재적을 수확할 수 있는 표본점은 223개소(13.9%)에 불과하였다. 수확이 예상되는 평균 흉고직경 예측값은 평균 흉고직경 30cm 이상의 목재를 수확할 수 있는 표본점은 전체 20.9%에 불과하였고, 절반 이상인 55.4%가 20~30cm급의 목재 수확이 가능한 것으로 확인되어 현실림의 생장 특성을 반영한 시업체계의 개선이 필요할 것으로 판단되었다. 또한 현장에서 지위지수에 따라 잠재수확량을 가늠할 수 있도록 지위지수별 잠재수확량 표를 작성하여 제공하였다. 본 연구의 결과는 앞으로 조림적지 평가 및 조림지 경영계획 수립에 활용성이 높을 것으로 사료된다.