The purpose of this study is to investigate the influence of social factors on the use of honorific language by discourse completion test. Participants complete a short discourse by filling in their responses in conversations that may occur in families, schools, and workplaces where the social status and solidarity of the listener is predetermined. Honorific styles of sentence endings of their responses are analyzed by the generalized linear mixed model. The results show that social status and solidarity are statistically significant factors in the use of honorific styles, but their effects are dependent on the discourse situation. The ratio of using honorific styles gradually increases as the formality of situation increases (i.e., family < school < workplace). Interestingly, when the solidarity is low at the workplace, the ratio of using honorific styles is consistently high regardless of the social status of the listener. These results show that the use of Korean honorific styles is pragmatically changing according to the discourse situation.

A conventional lumped-mass stick model is based on the tributary area method to determine the masses lumped at each node and used in earthquake engineering due to its simplicity in the modeling of structures. However the natural frequencies of the conventional model are normally not identical to those of the actual structure. To solve this problem, recently an updated lumped-mass stick model is developed to provide the natural frequencies identical to actual structure. The present study is to investigate the seismic response accuracy of the updated lumped-mass stick model, comparing with the response results of the shaking table test. For the test, a small size four-story steel frame structure is prepared and tested on shaking table applying five earthquake ground motions. From the comparison with shaking table test results, the updated model shows an average error of 3.65% in the peak displacement response and 9.68% in the peak acceleration response. On the other hand, the conventional model shows an average error of 5.15% and 27.41% for each response.

According to the recent presentation by the Korean Maritime Safety Tribunal, about 70% of marine accident occurs from fishing vessel, and 90% of cause of entire marine accidents attributes to human error. As fishing vessels require basic operations, fishing operations, other additional operations and techniques such as fish handling, cultivating excellent marine officer to prevent marine accident and develop industry is very important. A fisheries training ship is still very difficult to satisfy the demand for diversity of fishery training and sense of realism of the industry. As the result of employment expectation by category of business survey targeting 266 marine industry high school graduates who hope to board fishing vessels for the last four years, tuna purse seine was the highest with 132 cadets (49.6%), followed by offshore large purse seine (65 cadets, 22.4%), and tuna long line (35 cadets, 13.2%). The Korea Institute of Maritime and Fisheries Technology (KIMFT) has replaced old jigging and fish pot fishery training ships and proceeded developing and building multi-purpose fisheries training ships considering the demand of industry and the promotion of employment; however, the basic fishing method was set for a tuna purse seine. As a result of seakeeping model test, it can conduct the satisfiable operation at sea state 5, and survive at sea state 8.

소형선박 설계에 있어 항주에 따른 설계 종경사 결정은 선체저항 뿐만 아니라 항주 안정성에 많은 영향을 주고 있다. 이는 초기 설계 시 선박의 무게중심 결정을 시작으로 대부분 결정된다. 본 연구는 소형 쌍동선박에 대해 수치해석을 통한 수직방향 무게중심 변화에 따른 종경사 영향을 확인하고, 이를 모형시험에서 결과를 검토하였다. 다양한 수직방향 무게중심 변화에 따른 모형시험 검토는 이뤄지지 못했지만, 향후 신조 소형선박 초기설계시 보다 나은 종경사 자세를 고려한 수직방향 무게중심 위치 제시를 목적으로 연구를 수행하였다. 수치해석 결과의 검증을 위하여 모형시험과 자세 비교를 수행하였다. 무게중심의 변화에 따른 종경사 각도 및 저항성능의 변화가 연구되었다.

Structure behaviors resulting from an earthquake are experimentally simulated mainly through a shaking table test. As for large-scale structures, however, size effects over a miniature may make it difficult to assess actual behaviors properly. To address this problem, research on the hybrid simulation is being conducted actively. This method is to implement numerical analysis on framework members that affect the general behavior of the structure dominantly through an actual scale experiment and on the rest parts by applying the substructuring technique. However, existing studies on hybrid simulation focus mainly on Slow experimental methods, which are disadvantageous in that it is unable to assess behaviors close to the actual level if material properties change depending on the speed or the influence of inertial force is significant. The present study aims to establish a Real-time hybrid simulation system capable of excitation based on the actual time history and to verify its performance and applicability. The hybrid simulation system built up in this study utilizes the ATS Compensator system, CR integrator, etc. in order to make the target displacement the same with the measured displacement on the basis of MATLAB/Simulink. The target structure was a 2-span bridge and an RC pier to support it was produced as an experimental model in order for the shaking table test and Slow and Real-time hybrid simulations. Behaviors that result from the earthquake of El Centro were examined, and the results were analyzed comparatively. In comparison with the results of the shaking table test, the Real-time hybrid simulation produced more similar maximum displacement and vibration behaviors than the Slow hybrid simulation. Hence, it is thought that the Real-time hybrid simulation proposed in this study can be utilized usefully in seismic capacity assessment of structural systems such as RC pier that are highly non-linear and time-dependent.

인적자원관리에 대한 중요성이 강조되면서 인사 평가에 대한 공정성 인식이 구성원의 동기부여를 통 한 태도와 성과에 미치는 영향에 관한 연구가 활발히 이루어지고 있다. 반면 어떠한 요인들이 평가 공정 성을 형성하는지에 대한 선행요인들에 대한 논의는 거의 이루어지지 않고 있으며, 이에 대한 이론적 논의 역시 대부분 공정성 이론에 기반을 두고 공정성 인식이 구성원의 태도와 행위에 미치는 효과를 설명하는 것으로만 제한적으로 이루어지고 있다. 이에 본 연구에서는 공정성 휴리스틱 이론을 도입하여 평가 정확성과 평가 유용성이라는 선행요인들이 평가 공정성 인식 형성에 어떠한 영향을 미치는지를 설명하는 한 편, 이러한 인사평가에 대한 공정성 인식 정도가 궁극적으로 업무성과에 어떠한 영향을 주는지를 살펴보 고자 한다. 이러한 관계를 검증하기 위하여 본 연구에서는 항공사 승무원에 대한 설문자료를 활용하여 인사평가에 대한 정확성과 유용성 인식이 분배 공정성 및 절차 공정성 인식에 미치는 효과와 이 두 가지 공정성 인식이 인사평가 정확성과 유용성 인식과 서비스 성과 간 관계를 매개하는 효과를 실증하였다. 국내 대형항공사 승무원을 대상으로 한 204명의 표본을 구조방정식모형을 통하여 분석한 결과, 인사 평가 에 대한 정확성 정도는 절차 및 분배 공정성 인식에 모두 통계적으로 유의한 영향력을 갖지 못하는 것으 로 나타났다. 반면, 인사 평가에 대한 유용성 정도는 분배 공정성 인식과 절차 공정성 인식 모두에 정(+) 의 관계를 가지는 것으로 나타났다. 또한 부스트래핑을 통한 다중매개모형을 분석한 결과, 인사평가에 대 한 유용성은 절차공정성 인식 및 분배 공정성 인식을 매개하여 서비스성과에 간접적인 영향을 미치는 것으로 나타났다. 이러한 이론적 논의들과 실증 결과들을 바탕으로 시사점과 연구의 한계점 및 향후 연구 방향이 결론 부분에 논의되었다.

Using the extended technology acceptance model (TAM), the study aimed to understand consumers’ adoption process for smart fashion products. The research model was designed to examine the impacts of perceived ease of use and usefulness on attitude and behavior intention toward smart fashion products based on the technology innovativeness, enjoyment, and subjective norm variables. An online survey was conducted on consumers by employing a marketing research company. A total of 230 useable responses were obtained. Confirmatory Factor Analysis (CFA) was performed to test the measurement model. The proposed hypotheses were tested by employing the Structural Equation Model (SEM). The results found a positive impact of perceived ease of use on usefulness and a positive influence of usefulness on attitude and behavior intention. Attitude had a positive effect on behavior intention. In addition, technology innovativeness was found to have a positive influence on perceived ease of use and enjoyment had a positive influence on usefulness and attitude. Subjective norm predicted behavior intention. The findings of the study contribute to smart fashion literature and have important implications for smart fashion product developers and marketers, as they offer insights into the important role of technology innovativeness, enjoyment, and subjective norms perceived by consumers in improving attitudes and behavior intentions toward the products. Limitations and future research directions are discussed.

본 연구에서는 인천공항 제2계류장 관제소에 설치될 예정인 AMD에 선형제어알고리즘인 속도피드백 알고리즘을 적용하여 제어효율 및 안전성을 평가하였다. 공장성능시험 결과와 수치해석 프로그램의 해석결과를 비교하여 AMD가 설계의도대로 제어를 수행하는지 여부를 분석하였다. 또한 제어알고리즘에 의한 순수제어력에 추가되는 게인스케줄링과 원점보정신호가 제어력에 미치는 영향을 실험을 통해 확인하였다. AMD의 성능시험 결과 게인스케줄링과 원점보정신호는 제어효율에 큰 영향을 미치지 않음을 확인하였으며, 구조물에 큰 외력이 작용하는 경우에 발생하는 AMD 질량체의 과도한 이동으로 인해 구조물에 손상을 입힐 수 있는 문제에 대한 안전성을 검증하였다. 추가적으로 제어효율지수를 도입하여 AMD의 제어 상태를 모니터링한 결과, 적용된 알고리즘이 효과적으로 구조물을 제어함을 확인하였다.

The live fire test has been playing a critical role in evaluating the goals-to-meet of the weapon systems which utilize the power of explosives. As such, the successful development of the test systems therein is quite important. The test systems development covers that of ranges and facilities including system-level key components such as mission control, instrumentation or observation, safety control, electric power, launch pad, and so on. In addition, proper operational guidelines are needed with well-trained test and operation personnel. The emerging weapon systems to be deployed in future battle field would thus have to be more precise and dynamic, smarter, thereby requiring more elaboration. Furthermore, the safety consideration is becoming more serious due to the ever-increasing power of explosives. In such a situation, development of live fire test systems seems to be challenging. The objective of the paper is on how to incorporate the safety and other requirements in the development. To achieve the goal, an architectural approach is adopted by utilizing both the system components relationship and safety requirement when advanced instrumentation technology needs to be developed and deteriorated components of the range are replaced. As an evaluation method, it is studied how the level of maturity of the test systems development can be assessed particularly with the safety requirement considered. Based on the concepts of both systems engineering and SoS (System-of-Systems) engineering process, an enhanced model for the system readiness level is proposed by incorporating safety. The maturity model proposed would be helpful in assessing the maturity of safety-critical systems development whereas the costing model would provide a guide on how the reasonable test resource allocation plan can be made, which is based on the live fire test scenario of future complex weapon systems such as SoS.