Purpose: The purpose of this study was to describe the nursing unit manager's experience with patient safety accidents. Methods: Data were collected from April, 2017 to December, 2017 through in-depth interviews with seven unit managers who worked in General wards, OPD or in the ICU of a general hospital. Qualitative content analysis method was used to analyze the data. Results: The following four categories were elicited; dimensions are different from each other, complex feelings about the person after the accident, ambivalence for the accident triggers, leadership learned from accident management. Conclusion: The findings provided valuable informations on the nursing unit managers' experience with patient safety accidents, which held many nursing implications. Based on the findings, it is possible to develop accident management guidelines and the support system for accident management personnels.

Industrial disasters cause lots of damages from individuals to companies and country. Especially, damages caused by constructional disasters take very large portion in the whole industry and are accompanied by huge personal·physical damages. For the prevention of disasters, roles of safety manager are very important and especially, effects of disaster prevention can be changed by occupational ability of construction safety manager. To improve job abilities of safety manager, job education is very important. This research suggested a model for job education management of construction safety manager and proposed improvements as a study on improvement of curriculum for vitalization of job education of construction safety manager so as to improve occupational ability of safety manager. To achieve them, this research examined standard and operation status of current job education of safety manager and the problems and suggested a model materializing job educational contents as a measure to vitalize job education system of safety manager.

As industrialization progresses, mass production becomes a smart production system. However, industrial accidents do not decline, and during the course of industrialization, due to the logic of economic agents that have an economical and effective employment environment, they are changed to non-regular workers. The Occupational Safety and Health Act stipulates that the safety managers must be distinguished and the safety managers perform the task of conducting industrial accidents by balancing the duties and regulations specified in the Act on Special Measures for Deregulation. Safety administrators providing advice on issues needed to prevent industrial accidents and preventive measures We would like to present the problems and improvements that may arise due to safety managers ' replacement due to accidents caused by industrial accidents or accidents.

Safety accidents, which are called industrial accidents in construction work, are often caused by unstable physical and personal conditions combined during preparation and execution of work. It is difficult to manage all the construction works, but especially in the field of apartment construction work, complex and many kinds of works are being carried out at the same time. In the current construction, safety regulations such as safety management guidelines are generally well maintained, but the execution of manpower resources that can fulfill them is limited, and it is difficult to reduce the accident rate and loss cost. Therefore, in this study, it is a reality that most of the types of construction work are under contruction by subcontracting contract, so they are limit by methods of manual maintenance and safety education. Currently, the subcontractor is also allowed to perform safety management through the composition of the safety management review body, but it is operated formally. So alternatives to this were studied. As a result, safety accidents occur in the subcontractor's workplace due to vertical integration, which is a characteristic of the construction industry. Therefore, the safety management should be carried out by the subcontractor as well as the subcontractor It is concluded that effective and practical safety management can be achieved when management based on the personality that can communicate with each other through the management team is able to reduce the accident rate and loss cost.

As the demand for automation (or autonmation) or clean workplace has grown, the interest in the knowledge and skill regarding safety is rising in manager duty. Moreover, the importance of severity rate of injury has increased due to the enlargement of industry scale, even safety management area has developed. Thus, it is important that production managers, the core of the line process, realize the safety in their production line, even if a safety manager acts as a staff. However, in the duty oriented National Competency Standard (NCS), the education about the safety duty of production management part is insufficient. According to NCS, it is calculated production managers receive only 6.7% of whole safety education regarding the duty related the safety management for production manager in mechanical industry. However, the ability in safety is more demanded from production managers as the concept of “production and safety” turns into the concept of “production with safety”. And then in this paper, we will compare and analyze the safety management duty in Korean NCS and the safety management duty in State Leaders Connecting Learning to Work in US manufacturing industry, in terms of the duty of the production manage in mechanical industry (05). And, we will develop the safety duty education system for production manager, by classifying the safety education in domestic mechanical industry into knowledge education, skill education, and attitude education with using AHP(Analytic Hierarchy Process).

The study is conducted in order to identify whether there is difference in laboratory safety management committee and safety manager appointment for type of institutes(university, research institute, enterprise institute). The study conducted statistical analysis of 2484 institutes (university, research institute, enterprise institute) that attended 'current status of laboratory safety management' by year(number of current status participation). As a result, university showed increase in forming safety management committee as the number of current status(year) increases. The number of safety management committee held were the highest amongst all institutes being 2 held/ 2 year. Furthermore, period of safety management committee held at university and research institutes are decreasing stately. For 2014, the rate of hosting periodic committee and temporary committee simultaneously when necessary are increasing. The rate of appointing safety manager who is in charge of laboratory safety is increasing in university, but it is decreasing in research institute and enterprise institute. The work pattern of safety manager in university is increase in exclusive duties and decrease in adjunct duties, while work pattern in research institute and enterprise institute is more on the contract duties.

As people make efforts on accident prevention, the number of accidents has decreased over the years, however the number of fatal major industry accidents has rather increased, which resulted in the increase of the number of deaths in total. Under these conditions, there is an attempt to introduce and perform the safety vocational education system as a means for preventing major industry accidents. Therefore, in this paper, we analyse vocational education of manufacturing industry from the safety's point of view and suggest the efficient techniques measuring and managing each safety management. Proposed techniques show that the specification on safety determines weight through the managers of firms and each process is suggested by using SN ratio.

As people make efforts on accident prevention, the number of accidents is decreasing, fatal major industry accidents are rather than increasing so that the number of deaths has not decreased. Under these conditions, there is an attempt to introduce and perform the safety vacational education system as a means for keeping from major industry accidents. Therefore, in this paper, we analysis vacational education of manufacturing industry in safety point of view and suggest the technique efficiently measuring and managing each safety management. Proposed the technique shows that the specification on safety determines weight through the managers of firms and each process is suggested by using SN Ratio.

Risk Assessment, a basis of health and safety management system, is an calamity prevention activity which regularly measure the level of a risk to passively improve potential hazard. A problem, the assessment not being improved to be applied to the construction work site where requires diversity and complexity, causes the assessment to be inefficient to bring quality results. A study on the investigates and compares the surveyed degree of recognitions of workers who works in companies executing the risk assessment By the investigation and comparison, it is expected to bring the better solution for early and efficient application for those companies which are not taking the risk assessment.

Depending on changes in industrial structure, industrial accident preventive measures have been developed in various forms. The focus for prevention of industrial accidents had been changed from part of the hardware to behavior and consciousness of workers. According to the change of focus, Korea's industrial accident preventive measures also has been adjusted to voluntary safety and health considering the safety culture and such attempts of preventive measures has contributed for reducing the accident rate. Safety culture is difficult to access due to the fact that factors that make up the safety culture are comprehensive and varied and there are many of external factors that affect to the safety culture. Moreover, there is a limit for applying specific preventive measures. Because, management culture or value of enterprises is various depending on each country or region. Nevertheless, looking at previous studies of advanced countries, they are presenting the fact that safety leadership has greater influence to formation of the safety culture. As a result, we study the Influence of manager's safety leadership that effect on safety culture. we want to propose the way to activate safety culture in workplace and to contribute for safety culture research.

As shown in the accident analysis from 2007, it has been found that causes of accidents on large-scale projects are different from those found in general construction projects. A 300-question survey regarding systematic and practical aspects of safety problems at construction sites was distributed to ten (10) different companies. Participants were to respond subjectively, so that the results could be used to assemble the first formal questionnaire survey. They were collected and compiled by an advisory committee for this study. The resulting surveys were then sent to the division chiefs of the top 100 construction companies in Korea, in order to improve the response rate. The Department of Safety & Health Direction, and the :Ministry of Labor, ROK sent the same sheets to medium and small construction companies that placed within 101-200th of all Korea construction companies. The above safety engineers were classified into four (4) levels, from 1st to 4th, followed by the project dollar amount and risk level. Formulae were developed to assign safety engineers to construction sites by engineer level, the project dollar amount, and the project risk level. Conclusions are summarized as follows: 1) Reviewing the assignment system of experienced safety engineers to large scaled projects - The more experienced the engineers assigned to a project, the higher the level of accident prevention. 2) Enforcing the assignment of advanced level safety engineers to large-scaled sites - At least one advanced-level safety engineer should be assigned to construction sites with projects valued at 15million USD (15,000,000,000). 3) For assigning safety engineers by risk level - Twenty models have been developed to calculate the number of safety engineers to be assigned by risk level. In the future, risk level for each job should be established by the government (as is now the practice in Germany).

Small & medium sized company is the most efficient way of management to prevent my accident in the area of industry. Employees are more than 30 to less than 50 persons and which is liable for securing a safety manager on site, is gradually seen on the surface. Even a small company is nothing less than a dead zone from a safety since it's free from his obligation of employing a safety manager. Let us now think about the effective measures against a industrial accident by collecting, reviewing a variety of preventive measures, which is being carried out for preventing an industrial accident happening in a small company, and comparing, analyzing the effect according to the respective measures. Through this research, it's expected to contribute to both the development of small & medium sized company and our national economy with the improvement of a company's competitiveness and the accumulation a technical background by way of prevention from occurring industrial accident in a small & medium sized company, in accordance with an friendly environment of work room to protect the employee from leaving his job.

Small & medium sized company is the most efficient way of management to prevent my accident in the area of industry. Employees are more than 30 to less than 50 persons and which is liable for securing a safety manager on site, is gradually seen on the surface. Even a small company is nothing less than a dead zone from a safety since it's free from his obligation of employing a safety manager. Let us now think about the effective measures against a industrial accident by collecting, reviewing a variety of preventive measures, which is being carried out for preventing an industrial accident happening in a small company, and comparing, analyzing the effect according to the respective measures. Through this research, it's expected to contribute to both the development of small & medium sized company and our national economy with the improvement of a company's competitiveness and the accumulation of technical background by way of prevention from occurring industrial accident in a small & medium sized company, in accordance with an friendly environment of work room to protect the employee from leaving his job.

Needs of each enterprises for safety managers ability should be clarified and then the result should be taken into account regular curriculum and assessed it regularly. Keeping the student competance without this series of feedback will not be possible. A method, to assess the effectiveness of curriculum course, DACUM(Developing A Curriculum) could be applied in order to find out what subject will be useful. Questionnaire results with weight factor could be put into this study Task Analysis method and the importance determining method have been introduced here. As a further study, it is concealed that a study taking into account of company size, nature, local situation are needed to find out more useful application.