Lithium lanthanum titanium oxide (LLTO) is a promising ceramic electrolyte because of its high ionic conductivity at room temperature, low electrical conductivity, and outstanding physical properties. Several routes for the synthesis of bulk LLTO are known, in particular, solid-state synthesis and sol-gel method. However, the extremely low ionic conductivity of LLTO at grain boundaries is one of the major problems for practical applications. To diminish the grain boundary effect, the structure of LLTO is tuned to nanoscale morphology with structures of different dimensionalities (0D spheres, and 1D tubes and wires); this strategy has great potential to enhance the ion conduction by intensifying Li diffusion and minimizing the grain boundary resistance. Therefore, in this work, 0D spherical LLTO is synthesized using ultrasonic spray pyrolysis (USP). The USP method primarily yields spherical particles from the droplets generated by ultrasonic waves passed through several heating zones. LLTO is synthesized using USP, and the effects of each precursor and their mechanisms as well as synthesis parameters are analyzed and discussed to optimize the synthesis. The phase structure of the obtained materials is analyzed using X-ray diffraction, and their morphology and particle size are analyzed using field-emission scanning electron microscopy.

The low-temperature sinterability of TiO2-CuO systems was investigated using a solid solution of SnO2. Sample powders were prepared through conventional ball milling of mixed raw powders. With the SnO2 content, the compositions of the samples were Ti1-xSnxO2-CuO(2 wt.%) in the range of x  0.08. Compared with the samples without SnO2 addition, the densification was enhanced when the samples were sintered at 900oC. The dominant mass transport mechanism seemed to be grain-boundary diffusion during heat treatment at 900oC, where active grain-boundary diffusion was responsible for the improved densification. The rapid grain growth featured by activated sintering was also obstructed with the addition of SnO2. This suggested that both CuO as an activator and SnO2 dopant synergistically reduced the sintering temperature of TiO2.

This study compares the characteristics of a compact TiO2 (c-TiO2) powdery film, which is used as the electron transport layer (ETL) of perovskite solar cells, based on the manufacturing method. Additionally, its efficiency is measured by applying it to a carbon electrode solar cell. Spin-coating and spray methods are compared, and spraybased c-TiO2 exhibits superior optical properties. Furthermore, surface analysis by scanning electron microscopy (SEM) and atomic force microscopy (AFM) exhibits the excellent surface properties of spray-based TiO2. The photoelectric conversion efficiency (PCE) is 14.31% when applied to planar perovskite solar cells based on metal electrodes. Finally, carbon nanotube (CNT) film electrode-based solar cells exhibits a 76% PCE compared with that of metal electrodebased solar cells, providing the possibility of commercialization.

PURPOSES : This study analyzes the characteristics of nitrogen oxide concentration by applying titanium dioxide to existing roads in urban areas, using correlation analysis and a generalized linear model. METHODS : To analyze the characteristics of nitrogen oxide concentration with/without applying titanium dioxide to the urban road segment, data acquisition was conducted for nitrogen oxide concentration, weather information, and traffic information, etc., and a correlation analysis was conducted for each factor, with/without applying titanium dioxide to the roads. In addition, nitrogen oxide concentration generation models with/without the application of titanium dioxide to the roads were estimated using a generalized linear model. RESULTS : The results demonstrate that relative humidity and temperature were found to be slightly correlated with the nitrogen oxide concentration, both with and without the application of titanium dioxide to the roads; however, wind speed, solar radiation, and traffic volume were found to have somewhat low correlation according to the results of a correlation analysis. Moreover, relative humidity, temperature, solar radiation, and traffic volume were significant when titanium dioxide was applied to the roads, based on the estimated model from a generalized linear model, and the wind speed, solar radiation, and traffic volume were significant for the absence of titanium dioxide on the roads. CONCLUSIONS : Analytical results indicated that the characteristics of nitrogen oxide concentration vary depending on the application of titanium dioxide to the roads. In particular, when titanium dioxide was applied to the roads, the relative humidity and temperature were analyzed; according to both analyses, i.e., correlation analysis and a generalized linear model, the nitrogen oxide concentration was affected.

This study is conducted as a preliminary research to verify the feasibility of Ti-based Oxide dispersion strengthened (ODS) alloy. Pure-Ti powder is mixed with Y2O3 powder and subsequently, mechanically alloyed at -150oC. The Ti-based ODS powder is hot-isostatically pressed and subsequently hot-rolled for recrystallization. The microstructure consists of elongated grains and Y excess fine particles. The oxide particle size is larger than that of the typical Febased ODS steel. Tensile test shows that the tensile ductility is approximately 25%, while the strength is significantly higher than that of pure Ti. The high-temperature hardness of the Ti-ODS alloy is also significantly higher than that of pure Ti at all temperatures, while being lower than that of Ti-6Al-4V. The dimple structure is well developed, and no evidence of cleavage fracture surface is observed in the fracture surface of the tensile specimen.

본 연구에서는 0.5, 1.0, 1.5 wt%의 TiO2를 함유하는 인듐-티타늄 수산화물을 졸 및 염기 첨가에 의해 얻었고, 200oC와 500oC에서 겔화 과정을 통해 ITiO(Indium Titanate Oxide)를 얻었다. 200oC에서 겔화 과정 후 얻어지는 ITiO 입자가 작아서 조밀성이 있는 ITiO 타겟을 제조하였다. 0.5, 1.0, 1.5 wt%의 TiO2를 함유하는 ITiO 타겟을 스퍼터링하여 ITiO 박막을 유리판위에 제작하여 비저항, 전하 이동도, 캐리어 농도를 조사하였다. 이들 박막 중에서 산소 조성이 0.4 %인 조건에서 0.5 wt% 중량% TiO2를 함유하는 ITiO 타겟으로부터 제작된 ITiO 박막이 가장 낮은 비저항, 가장 큰 전하이동도 및 가장 낮은 캐리어 농도를 보임을 알 수 있었고, 얻어진 ITiO 박막의 광투과율을 측정하여 적외선 영역에서 광투과율이 ITO(Indium Tin Oxide) 박막에 비해 현저히 증가함을 발견하였다.

Purpose: Various studies have been conducted on macromolecular materials that not only have basic characteristics but also UV-blocking capabilities. Here we report tinted hydrogel contact lens containing titanium silicon oxide nanoparticles. This study also showed the physical and optical effects of 4-iodoaniline on contact lenses, which affect UV transmissibility. Methods: Titanium silicon oxide nanoparticles were used as additives. HEMA, MA, MMA, 4-iodoaniline and a cross-linker EGDMA were copolymerized in the presence of AIBN as an initiator. The physical properties such as water content, refractive index, contact angle, spectral transmittance of produced contact lenses were measured. Results: Measurement of the physical characteristics of the copolymerized material showed the water content of 38.68~35.01%, refractive index of 1.4350~1.4418, contact angel of 34.15~57.25° and spectral transmittance of 1.0~84.8%. Also, the transmittance for UV light was reduced significantly in combinations containing titanium silicon oxide nanoparticles. Conclusions: Tinted hydrogel contact lens material containing titanium silicon oxide nanoparticles is expected to be able to be used usefully as a material for UV-block hydrogel contact lens.

목적: 본 연구는 콘택트렌즈 재료로 널리 사용되는 2-hydroxyethyl methacrylate, N-vinyl-2-pyrrolidone, methyl methacrylate, ethylene glycol dimethacrylate에 titanium isopropoxide와 tungsten(VI) oxide 나노입자를 첨가하여 안의료용 렌즈 재료를 중합하였다. 방법: 안의료용 콘택트렌즈의 첨가제로 Tungsten (VI) oxide 나노입자 사용의 활용도를 조사하기 위해 tungsten(VI) oxide 나노입자를 포함한 하이드로젤 콘택트렌즈 재료의 광학적, 물리적 특성 변화를 측정하였다. 결과: 생성된 고분자에 대한 자외선 영역의 투과율은 매우 낮게 측정되어 자외선 차단 능력이 있는 것으로 나타났다. 또한 tungsten(VI) oxide 나노입자의 첨가는 함수율의 큰 변화를 나타내지 않았으나 일정비율을 첨가한 조합에서는 소량의 함수율 변화가 나타났다. 함수율의 큰 변화가 없음에도 불구하고 산소침투율의 측정 값은 tungsten(VI) oxide 나노입자의 첨가 비율이 증가할수록 계속적으로 감소하는 경향이 나타 났다. 결론: 이상의 결과를 통해 titanium isopropoxide 및 tungsten(VI) oxide 나노입자는 하이드로젤 콘택트렌즈의 기본적인 물성을 만족시키면서 기능성 콘택트렌즈 재료로 유용하게 활용될 수 있을 것으로 판단된다.

Titanium dioxide thin films were fabricated as hydrogen sensors and its sensing properties were tested. The titanium was deposited on a SiO2/Si substrate by the DC magnetron sputtering method and was oxidized at an optimized temperature of 850˚C in air. The titanium film originally had smooth surface morphology, but the film agglomerated to nano-size grains when the temperature reached oxidation temperature where it formed titanium oxide with a rutile structure. The oxide thin film formed by grains of tens of nanometers size also showed many short cracks and voids between the grains. The response to 1% hydrogen gas was ~2×106 at the optimum sensing temperature of 200˚C, and ~103 at room temperature. This extremely high sensitivity of the thin film to hydrogen was due partly to the porous structure of the nano-sized sensing particles. Other sensor properties were also examined.

In the present study, the focus is on the effect of cobalt oxide powder in the carbothermal reduction of the titanium-cobalt-oxygen based oxide powder by solid carbon for the optimizing synthesis process of ultra fine TiC/Co composite powder. The titanium-cobalt-oxygen based oxide powder was prepared by the combination of the spray drying and desalting processes using the titanium dioxide powder and cobalt nitrate as the raw materials. The titanium-cobalt-oxygen based oxide powder was mixed with carbon black, and then this mixture was carbothermally reduced under flowing argon atmosphere. Changes in the phase structure and thermal gravity of the mixture during carbothermal reduction were analysed using XRD and TGA. Titanium-cobalt-oxygen based oxide powder desalted at had a mixture of . And the one desalted at had a mixture of . In the case of the former powder, the reduction of cobalt oxide powder in the titanium-cobalt-oxygen based oxide powder occurred at lower temperature than the latter one. However, the carbothermal reduction of titanium dioxide powder in the titanium-cobalt-oxygen based oxide powder with a mixture of occurred at higher temperature than the one with a mixture of . And also, the former powder showed a lower TiC formation ability than the latter one.

In the present study, the focus is on the analysis of carbothermal reduction of the titanium-cobalt-oxygen based oxide powder by solid carbon for the optimizing synthesis process of ultra fined TiC/Co composite powder. The titanium-cobalt-oxygen based oxide powder was prepared by the combination of the spray drying and desalting processes using the titanium dioxide powder and cobalt nitrate as the raw materials. The titanium-cobalt-oxygen based oxide powder was mixed with carbon black, and then this mixture was carbothermally reduced under a flowing argon atmosphere. The changes in the phase structure and thermal gravity of the mixture during carbothermal reduction were analysed using XRD and TGA. The synthesized titanium-cobalt-oxygen based oxide powder has a mixture of and . This oxide powder was transformed to a mixed state of titanium car-bide and cobalt by solid carbon through four steps of carbothermal reduction steps with increasing temperature; reduction of to and Co, reduction of , to the magneli phase(, n>3), reduction of the mag-neli phase(, n>3) to the (2n3) phases, and reduction and carburization of the (2n3) phases to titanium carbide.

비정량적 조성을 가진 비정질 산화타이타늄 박막을 반응성 스퍼터링으로 제조한후, 500˚C~600˚C에서 10분-3시간 열처리후 냉각속도를 달리하였을 때의 상변태과정을 고찰하였다. 10분-30분정도의 단기간의 열처리후 급냉한 경우에는 Mageneli상이 관찰되어 비정상정 상(TiO2-x)이 산화되는 속도가 결정화속도보다 훨씬 느린 것으로 생각되었다. 그러나 열처리 유지시간이 증가하면 500˚C에서 부터의 느린 냉각과정에서는 Magneil가 anatase로 변화하며 변태한 anatase는 저온에서는 rutile로 변화하지 않았으나 500˚C~300˚C의 온도 구간을 비교적 빠르게 냉각하면 Matneli상은 직접 rutile상으로 변화할 수 있는 것으로 고찰되었다. 또한 600˚C에서 냉각시에도 rutile상이 형성됨으로서 rutile상은 500˚C이상의 고온에서도 이 상ㅇ르 거치지 않고 변태할 수 있는 것으로 분석된다. 결정화 및 산화과정은 부피의 변화를 야기하여 박막의 표면 형상의 변화도 가져옴이 관찰되었다.

반응성 스퍼터링법을 이용하며 산화티타늄 박막을 10%~60%의 산소분압하에서 증착하고 열처리 온도와 시간에 따른 박막의 결정화 특성을 고찰하였다. 증착직후에 형성된 비정질 상은 열처리시 산소분압이 15% 이상인 경우에서는 900˚C에서는 rutile로，500˚C에서는 anatase상으로 각각 결정화되었으나 산소 결핑성 비정량도가 심한 10%의 경우에는 온도와 무관하게 장시간의 열처리에서는 rutile 상으로 결정화되었다. 이 경우에 결정화 초기에 형성되는 상은 박막의 산화진행속도가 느린 500˚C이하의 온도에서는 Magneli상 (Ti6O2n-1)이，50˚Csim600˚C 에서는 비정량적인 anatase상이 형성 되었다. 따라서 초기에 형성된 상이 비정량적일 경우 산화의 진행에 따라서 최종적으로 가장 안정한 상인 rutile상으로 변화하며 초기에 정량적인 상이 형성되면 열처리시 상변화 없이 성장이 계속될 수 있음을 알 수 있다.

The VOCs have a direct influence on indoor air pollution, and stimulate respiratory organs and eyes in human body. Also, most of VOCs are a carcinogenic substances and causes to SBS (sickness building syndrome). Therefore, this study was progressed in photocatalysis of VOCs using UV/TiO2 which was a benign process environmentally. The experiments were performed to know photodegradation characteristics as crystalline structure of TiO2 which had anatase, rutile and P-25 (anatase:rutile=70:30). The main purpose of this study was to identify photocatalytic characteristics as inlet concentration of reactants, H2O, and residence time.