본 연구는 반밀폐형 토마토 재배 온실에서 광합성율 극대화를 위한 적정 탄산가스 시비 농도를 구명하고자 광합성 모델을 이용하여 잎의 최대 카복실화율(Vcmax), 최대 전자전달속도(Jmax), 열파괴, 잎 호흡 등을 계산하고 실제 측정값과 비교하였다. 다양한 광도(PAR 200μmol·m -2 ·s -1 to 1500μmol·m -2 ·s -1 )와 온도(20°C to 35°C) 조건에서 CO2 농도에 대한 A-Ci curve는 광합성 측정 기기를 사용하여 측정하였고, 모델링 방정식으로 아레니우스 함수값 (Arrhenius function), 순광합성율(net CO2 assimilation, An), 열파괴(thermal breakdown), Rd(주간의 잎호흡)를 계산 하였다. 엽온이 30°C 이상으로 상승하였을 때 Jmax, An 및 thermal breakdown 예측치가 모두 감소하였고, 예측 Jmax의 가장 최고점은 엽온 30°C였으며 그 이상의 온도에서는 감소하였다. 생장점 아래 5번째 잎의 광합성율은 PAR 200－ 400μmol·m -2 ·s -1 수준에서는 CO2 600ppm, PAR 600－800μmol·m -2 ·s -1 수준에서는 CO2 800ppm, PAR 1000μmol·m -2 ·s -1 수 준에서는 CO2 1000ppm, PAR 1200－1500μmol·m -2 ·s -1 수준에서는 CO2 1500ppm을 공급했을 때 포화점에 도달하였다. 앞으로 광합성 모델식을 활용하여 과채류 온실 재배 시 광합성을 높일 수 있는 탄산시비 농도를 추정할 수 있을 것으로 판단된다.

This study is to compare the effect of estrus synchronization and embryo transfer between Korean and Mongolian cattle. Embryos were collected from 9 donors housed in Asan city in South Chungcheong Province, South Korea. Embryos were collected 9 donors from Khushaat sum, Selenge province and Bayanchandmani sum, Tov province in Mongolia. Follicle Stimulating Hormone (FSH), Controlled Internal Drug Release (CIDR) and Prostaglandin (PG) were used for superovulation. Subsequently, Artificial Insemination (AI) was done for donor cow and embryo was collected after 7 and 8 days. Collected embryos were compared between Mongolian and Korean cattle. Finally, good quality and fresh embryos were transferred to 50 and 22 recipients of cows in Korea and Mongolia respectively. The findings show that Korean native cattle each donor cow produced on an average 16.9 embryos and, 10.9 embryos were found transferable. But in case of Mongolia the average production of embryos per donor cow was 8.6 embryos and, 6.2 embryos were found transferable. Embryo collection after 7 and 8 days was not difference in embryo production in Korea. But, in Mongolia embryo production after 8 days was found more efficient than the 7 days. Korean native recipient's cows (74.6%) and Mongolian recipient's cows (71.0%) respectively were found transferable ovarian stage. The result suggested that efficiency of embryo production from the superovulation method treated of Korean cow were higher than the Mongolian cow. The pregnancy rate of Korea native cattle was 72%, which was about 10% higher than that of Mongolia cattle.

This study was conducted to evaluate the effect of transfer temperature of epididymis on survival rate of semen and development ability of B6D2F1 mice embryos. No significant differences were noted in the survival rate of semen (59.0% ± 0.1 vs. 47.6% ± 0.1), in vitro fertilization rate (90.7% ± 0.1 vs. 90.7% ± 0.1), developmental rate (90.0% ± 0.1 vs. 90.0% ± 0.1), and blastocysts formation rate (53.1% ± 0.2 vs. 52.3% ± 0.2) between groups. (NS; P>0.05). However, the zona hatched rate was significantly higher in the 4°C group compared to those of the 37°C group (47.8% ± 0.1 vs. 25.6% ± 0.2; p<0.05). When it comes to cell numbers of blastocysts, the % ICM (/total cells) was significantly higher in the group of 4°C compared to the 37°C (27.0% ± 0.1 vs. 18.3% ± 0.1; p<0.05). However there were no differences in total cell numbers (72.7 ± 31.6 vs. 62.0 ± 36.6), ICM cell numbers (17.0 ± 7.8 vs. 14.6 ± 8.6), TE cell numbers (55.8 ± 29.8 vs. 64.0 ± 24.4), the ratio of ICM:TE (1:4.2 ± 4.1 vs. 1:6.4 ± 7.2) between two groups (NS; P>0.05).Taken altogether, it is expected to achieve the best developmental ability of B6D2F1 mice embryos in the transfer temperature of epididymis. Also these results can provide fundamental data to maximize culture condition for in vitro fertilization on B6D2F1 mice. In future, therefore, it is expected that results herein might be applied for in vitro culture of human embryos.

단동 이중비닐하우스에서 수막에 의한 열전달 특성 및 가온효과를 구명하기 위하여 작물이 재배되는 수막온실의 실내외 기온과 수막의 수온 등을 계측하였고, 단위 피복면적당 수막에 의한 총 공급열량, 열관류율, 관류열량, 온실 내부로 전달되는 열량비율 변화를 비교·분석하였다. 1중과 2중사이의 기온은 외부기온보다는 수막유량과 공급수온에 따라 결정되는 것으로 나타났다. 수막유량이 증가할수록, 공급수온이 높을수록 수막과 2중 하우스 내부와의 열관류율(UW-IN)은 유의하게 증가하는 경향을 보였다. 그러나 수막유량과 공급수온이 일정조건(수 막유량 0.00266L·m-2·s-1, 공급수온 19.8oC) 이상에서는 UW-IN 값이 10W·m-2·oC-1 정도로 수렴되는 것으로 나타났다. 수막과 1·2중 공기 사이의 열관류율(UW-B)의 경우에도 수막유량 및 공급수온에 따라 증가하는 경향을 보였으나, 경향성은 상대적으로 작은 것으로 분석되었다. UW-B는 연구자에 따라 전체적으로 큰 차이를 보이고 있으며, 본 연구에서는 3.27~4.44W·m-2·oC-1의 범위를 보였다. 수막에 의한 총 공급열량(QW)과 온실 내외부로 전달 되는 관류열량(QW-IN, QW-B)의 경우, QW 값이 QW-IN과 QW-B의 합과 매우 유사하게 일치하고 있어 본 연구에서 제시한 결과가 신뢰성이 있음을 확인할 수 있었다. 수막에 의해 내부공기를 가열하는데 사용되는 열량은 최대 57% 수준으로 분석되었고, 우리나라 수막재배온실의 경우 약 22~28% 수준으로 판단된다. 본 연구는 농업인이 실제 사용하는 수막온실과 가장 유사한 조건에서 수막에 의한 온도변화, 열관류율과 관류열량을 계량화함으로써 향후 경제적인 수막온실 설계 시 활용할 수 있을 것으로 기대된다.

Eight minerals (Ca, Cu, Fe, K, Mg, Mn, Na and Zn) were determined in Schizandra chinensis fruits and their infusions in Seoul. The average mineral contents per Schizandra chinensis fruits (100 g) were K (966.08 mg), Mg (87.20 mg), Ca (15.19 mg), Mn (6.19 mg), Fe (3.99 mg), Zn (2.78 mg), Na (2.15 mg) and Cu (0.31 mg) respectively by Inductively Coupled Plasma-Mass Spectrometer. The quantity of K and Zn were found significantly higher in Korean fruits than the Chinese fruits (p < 0.05). The other 6 minerals did not reveal remarkable difference. In the case of processed Schizandra chinensis tea, it had K (217 mg), Mg (20.40 mg), Ca (7.16 mg), Na (2.95 mg), Mn (1.34 mg), Fe (0.95 mg), Zn (0.25 mg) and Cu (0.09 mg) per 100 g respectively. In extraction of Schizandra chinensis fruits, as it took a longer extraction time, and in a powder form rather than a raw form, it had a higher contents of minerals. When a powder type of Schizandra chinensis fruits was extracted for 24 hours at 25℃, the transfer rate appeared with Ca (36.27%), Mn (25.44%), K (22.43%), Zn (21.00%), Na (19.91%), Mg (19.55%) Cu (13.78%) and Fe (6.45%) respectively.

In this study, the transfer rate of wild type Listeria monocytogenes (LM) was investigated to establish the standard of safety management during pork meat processing for meat to meat and meat to food contact surfaces contamination at 5 and 10oC. The transfer rate of LM from meat to meat during the processing increased from 0.02% after 30 min to 0.42% after 120 min at 5oC, while for conveyor belt and stainless steel, it decreased from 0.015% and 0.013% after 30 min to 0.002% and 0.0003% after 120 min at 5oC, respectively (p < 0.05). When temperature increased to 10oC, the transfer rates of LM from meat to meat, conveyor belt and stainless steel were the highest at 60 min exposure, and all decreased after 120 min. In reverse, the transfer rate from food contact surface to pork meat was significantly higher than that from pork meat to food contact surface (p < 0.01). Also, the transfer rate to conveyor belt was significantly higher than stainless steel (p < 0.05) and it was highest at 30 min exposure time in both 5 and 10oC. This study indicates that the transfer and adherence rates of LM are influenced by the contact time and temperature. Consequently, these results were utilized to develop a predictive model with a high level of confidence which can lead to prevent cross-contamination during pork meat processing.

The objective of this study was to investigate the comparison of transferable embryos and pregnancy rate between Hanwoo and Chickso. The results obtained were as follows: No differences were observed in the efficiency of superovulation rates on Hanwoo 78%, and Chickso 85%, respectively. The mean number of total embryos are each 14.76± 2.16 and 6.23±1.07. So the mean number of transferable embryos are each 10.94±1.91 and 4.58±1.05. In addition, the mean number of total Hanwoo embryo from <10 and 10≤ of corpora luteum was 0.50±0.50, 11.56±1.92, respectively. In case of Chickso, The mean number of transferable embryo from <10 and 10≤ of CL was 2.75±1.39, 6.00±1.00, respectively. The pregnancy rates were Hanwoo 40%, and Chickso 37% following transfer of fresh embryos produced in vivo. Also, the pregnancy rates of Chickso 60% were significantly greater (p<0.05) than the Hanwoo 42.48% following transfer of following transfer of frozen embryos, respectively. In conclusion, these results suggest that Chickso may be effectively used for transferable embryos production in Hanwoo. Although the transferable embryos number was not enough, it seems the Chickso greatly affect pregnancy rate. The results indicated that the possibility of transferable embryos from Chickso for embryo transfer could be confirmed in this study. Based on the present findings, it was suggested that it is very important to evaluate in vivo embryo production and pregnancy rate of embryo transfer following superovulation for effective Hanwoo and Chickso production.

This study was performed to determine the transfer rates of each foodborne pathogen from pork meat packaging during the processing. We analyzed the transfer rate of Listeria monocytogenes from contaminated pork meat to worker's hands (wearing polyethylene gloves, PEG; cotton gloves, CG; and bare hands), cutting boards and knives, and vice versa. Transfer rate of CG 100.00% was higher than that of bare hands 2.513% and PEG 1.511%. In particular, when wearing CG, the transfer rate from the CG to bare hands with CG was 0.08%. Also, the range of transfer rates from contaminated pork meat to cutting board and knife was 0.352-3.791%. In contrast, transfer rates from the workers’ hands (with PEG/CG and bare hands) to cutting board, knife, and pork meat ranged from 0.001 to 0.141%. There was a lower transfer rate from workers’ hands than from pork meat. These findings indicate that use of PEG could effectively reduce or prevent the cross-contamination compared to CG and provide important information concerning the consecutive transfer of L. monocytogenes during food processing.

This study was carried out to confirm the effects of luteotrophin, human chorionic gonadotrophin (hCG), and an anti-luteolytic agent, flunixin meglumin (FM), on pregnancy rates in Hanwoo with in vitro produced (IVP) embryo transfers (ET), and to research the effects on the estrus cycle. Treatments included hCG and FM administration 3~10 minutes prior to ET. Also, pregnancy rates were compared with lidocane treatment and FM treatment prior to ET. The results are shown below. 30-day pregnancy rate was 76.7% in the hCG-treated group and 75.7% in the FM-treated group. Both rates were higher than the 70% rate for the control group. 42-day pregnancy rate was 76.7% in the FM-treated group. This was higher than 66.7% recorded for both the hCG-treated and control groups. The pregnancy rate of the hCG-treated group was high at Day 30 (76.7%) but low at Day 40 (66.7%), and there were no differences from the FM-treated and control groups. The recurrent estrus rate of infertile individuals at 2 weeks after ET was 36.4% in the hCG-treated group, under 71.4% in the FM-treated group and 80.0% in the control group. The non-pregnancy rate of individuals without recurrent estrus was 18.2% in the hCG-treated group, which was higher than the 0% rate in both the FM-treated and control groups. The pregnancy rates were higher in the FM-treated group than the Lidocane-treated group with 72.3% versus 67.5% in the heifers and 48.9% versus 43.6% in the cows. From the above results, the FM treatment proved more effective than the hCG treatment and no treatment whatsoever in increasing pregnancy rates after ET. In addition, hCG treatment was shown to be undesirable due to the deviations it caused in the reproductive physiology of the hCG-treated recipients. Therefore, in our study, the FM treatment resulted in a higher pregnancy rate than either lidocaine treatment or no-treatment in the trials of ET.

The objective of this work was to determine the effect of corpus luteum (CL) grade on pregnancy rate after embryo transfer in Korean cattle and we found that CL development was linked to pregnancy rate. The in vivo derived blastocyst-stage embryos were transferred to 15 recipients synchronized in the estrus cycles. Based on size and palpable characteristics, CLs were categorized into three grade. The grade three CL is not to be identified by rectal palpation. The pregnancy rates tended to increase with the increase in CL size of recipients. In grade one, two, and three, the pregnancy rates were 62.5%, 50.0%, and 0%, respectively. This result suggests that pregnancy rates after embryo transfer might be affected by the CL status of recipients.

Oxygen consumption has been regarded as a useful indicator for assessment of mammalian embryo quality. This study was performed to investigate whether oxygen consumption reflects morphological grade of in vivo derived bovine blastocyst-stage embryos (blastocyst). The oxygen consumption of in vitro produced blastocyst was compared to its total cell number. In addition, pregnant rate was measured after transplantation of in vivo blastocysts with different oxygen consumption. The quality of blastocyst collected on day 7 after artificial insemination was categorized as grade I and II (G I and G II) based on microscopic observation of the morphology. Oxygen consumption of blastocyst was measured using a scanning electrochemical microscopy (SECM) and total cell number of in vitro blastocyst was enumerated by counting cells stained by propidium iodide. Pregnancy of recipient cow was confirmed with rectal palpation after 60 days of embryo transfer. The oxygen consumptions of G I blastocysts were significantly higher than those of G II blastocysts ( versus , p<0.05). Total cell numbers of in vitro blastocysts were 74.8, 90.7, and 110.2 in the oxygen consumption of below 10.0, 10.0~12.0, and over respectively. Total cell number was significantly increased in embryos with high oxygen consumption (p<0.05). Pregnant rate in recipient cow was 0, 50, and 85.7% in the transplantation of embryo with the oxygen consumption of below 10.0, 10.0~12.0, and over , respectively. These results suggest that measurement of oxygen consumption may help increase the pregnant rate of bovine embryos.

This study examined pregnancy and fetal loss rates according to different estrus synchronization protocols and injection of gonadotropin releasing hormone (GnRH) after transfer of Korean Native Cattle embryos to Holstein recipients. In Experiment 1, recipients received no treatment (Control, n = 119); two injections of prostaglandin ( ) 11 days apart (PGF group, n = 120); GnRH (day 0)- (day 7)-GnRH (day 9) (Ovsynch group, n = 120); and CIDR (day 0)- and CIDR removal (day 7)-GnRH (day 9) (CIDR group, n = 110). In Experiment 2, the control group was received no treatment of GnRH. The treatment groups were received GnRH at embryo transfer (ET) (day 0), 7 days later, 14 days later, ET and 7 days later, 7 and 14 days later, or ET, 7 and 14 days later. Recipients were assigned to treatment randomly and received two in vitro produced blastocysts. Pregnancy was diagnosed at day 60 by palpation per rectum. Fetal loss to term was determined by palpation every 90 days thereafter. In Experiment 1, the pregnancy rate in the CIDR group (59.1%) were higher than in the Control group (42.0%) (p<0.01); fetal loss rates were similar for all groups (12.0 to 18.5%). In Experiment 2, the pregnancy rate in Day 0+7+14 group was higher (60.2%) than the control (40.2%) (p<0.01) and resulted in a lower fetal loss (p<0.05) than the control (4.6 vs. 11.4%). There were no significant difference between other treatment and the control (p>0.05). These results show that pregnancy rates of bovine embryos can be enhanced by CIDR insertion or GnRH treatment. Additionally, fetal loss may be reduced with GnRH treatment after ET.

발정 주기와 상관없이 CIDR를 삽입하는 날에 2.5 mg estradiol benzoate, 50 mg progesterone을 주사하였다. CIDR 삽입 후 4일 동안 FSH를 감량법으로 12시간 간격으로 주사하였으며, FSH 주사 5, 6회째에 를 투여했다. 1회째 주사 24시 간 후 CIDR를 제거하고 GnRH를 주사하였다. 공란 우들을 1번째 주사 후 60시간과 72시간에 수정을 시켰다. 인공수정 7일 후 회수된 수정란을 수정란 이식 때 pro

If do not become whole optimization because enterprise's individual enterprise internal determinate improvement effort is associated with activity in enterprise SCM, competitive power can not but be extremely limited the result. Therefore, to spur in hidden cost's discovery and logistics' optimization is actuality. In this paper, as long as it is by logistics cost except empty driving if reverse logistics happens in distribution channel progressing, logistics reverse logistics' hidden cost through model that do minimization profit of logistics to look for plan that can do maximization try. Finally, is based on dual of distribution cost and profit of logistics and reverse logistics and achieves Pull, optimal system modeling that use Push system and gropes method of effective logistics cost.