ZnO nanostructures were grown on an Au seed layer by a hydrothermal method. The Au seed layer was deposited by ion sputter on a Si (100) substrate, and then the ZnO nanostructures were grown with different precursor concentrations ranging from 0.01 M to 0.3M at 150˚C and different growth temperatures ranging from 100˚C to 250˚C with 0.3 M of precursor concentration. FE-SEM (field-emission scanning electron microscopy), XRD (X-ray diffraction), and PL (photoluminescence) were carried out to investigate the structural and optical properties of the ZnO nanostructures. The different morphologies are shown with different growth conditions by FE-SEM images. The density of the ZnO nanostructures changed significantly as the growth conditions changed. The density increased as the precursor concentration increased. The ZnO nanostructures are barely grown at 100˚C and the ZnO nanostructure grown at 150˚C has the highest density. The XRD pattern shows the ZnO (100), ZnO (002), ZnO (101) peaks, which indicated the ZnO structure has a wurtzite structure. The higher intensity and lower FWHM (full width at half maximum) of the ZnO peaks were observed at a growth temperature of 150˚C, which indicated higher crystal quality. A near band edge emission (NBE) and a deep level emission (DLE) were observed at the PL spectra and the intensity of the DLE increased as the density of the ZnO nanostructures increased.
본 연구는 IT프로젝트를 진행 함에 있어 프로젝트의 시작부터 완료까지, 각 단계의 진행에 따라 나타 날 수 있는 IT프로젝트의 특징 중 하나인 프로젝트 진행 단계에서의 비가시성을 고려하여 고객의 다양하고 복잡하게 변화 하는 요구 사항에 대하여 IT프로젝트의 진행 과정에 보다 유연하게 대응하고 고객의 요구사항에 맞춘 IT프로젝트를 완료하기 위하여 요구공학 관점에서 요구 관리 프로세스의 중요한 요소들을 연구하고 성공적인 IT프로젝트를 위한 효과적인 요구사항 관리 모델을 제시하고자 한다.
네트워크 기술과 하드웨어의 발전으로 인해 영상 서비스 분야에서 많은 응용 서비스 기술이 등장하고 있다. 이 중에서도 IPTV는 대용량 멀티미디어 스트리밍 기술이 적용되면서 그 수요가 기하급수적으로 증가하고 있다. 만족할만한 IPTV 서비스를 제공해 주기 위해서는 안정적인 전송자원을 확보하는 것이 필수적이다. 본 논문에서는 IPTV 서비스를 위한 전송자원 확보를 위해 기존의 AVB기술을 기반으로 하여 만족할만한 전송서비스 품질(QoS)를 보장하는 방법을 제안한다. 단일 시간동기화와 균형적인 평균 전달 지연 시간을 고려한 시간동기화 기술을 적용하여 IPTV 서비스의 전송 품질을 보장하고자 한다.
지난해 독일 벨루가 시핑의 화물선 2척이 우리나라 울산항에서 출발하여 사상 처음으로 북동항로 운항에 성 공한 것으로 알려지면서 북극항로의 상업적 이용가능성이 증대되고 있다. 특히 극동-유럽을 연결하는 북동항로가 수 에즈운하를 통과하는 남방항로보다 운항거리를 40%나 단축시킴으로써 새로운 단거리 미래 물류항로로 대두되면서 북동항로 경유해협의 법적 지위, 러시아의 북동항로 법률과 유엔해양법협약과의 충돌 등 법적 문제가 주요 이슈로 등장하고 있다. 따라서 본 연구에서는 유엔해양법협약의 시각에서 북동항로의 주요 법적 문제와 미치는 영향에 대해 검토하고 있다.
본 연구는 차세대 에너지원으로 주목 받고 있는 직접메탄올연료전지(Direct Methanol Fuel Cell, DMFC)에 대해 mutiscale 기법을 사용하여 DMFC의 MEA부분에 대한 상세 모델링 및 전산모사를 통한 이론적 고찰을 시도하였다. 본 연구에서 이용한 multiscale 모델링 방법은 공정시스템 공학의 kinetic 중심의 모델링 방법과 전산유체역학(Computational Fluid Dynamics, CFD)의 유동중심의 모델링 방법을 유기적으로 결합하여 모사 중간에 필요한 데이터 교환을 함으로써 정확한 모델링 및 전산모사 결과를 얻었다. CFD 모델링으로 유체 이동현상을 3차원으로 해석하였고, 동시에 복잡한 비선형 대수방정식으로 표현되는 반응속도, 전기화학반응을 DAE (Differential & Algebraic Equation) solver로 계산하였다. 모델은 메탄올의 산화반응과 산소의 환원반응을 중심으로 MEA (Membrane Electorde Assembly)부분에서 물리화학적, 전기적 현상 현상을 규명하고, 반응 메커니즘을 구성하였다. MEA 모델은 3차원 공간에서 변위를 가지는 3차원 모델로 구성하였으며, 정상상태 및 등온공정의 조건하에 수립되었다. 이를 통해 channel을 포함한 MEA 부분에서 발생되는 물리적, 화학적, 전기적 현상을 정확히 예측 할 수 있다. 본 연구를 통해 수행된 결과는 DMFC의 실험계획 및 운전조건을 도출함에 있어 매우 유용한 역할을 할 수 있을 것으로 사료되며, 추가적인 연구를 통해 DMFC의 상용화에 크게 이바지 할 수 있을 것으로 사료된다.
The object of this study was to investigate the effects of rice particle size on the physicochemical properties of beef-rice porridge. The pH of beef-rice porridge was decreased as compared to that of the control, while the redness of beef porridge increased according to rice particle size. The viscosity of flour in the beef-rice porridge was the highest among three porridges, at 40℃. The protein content of beef-rice porridge was increased 3-fold over that of rice porridges. The total amino acid content of the beef-rice porridge was 3071.2 mg/100 g, and that of rice porridge was 1147.5 mg/100 g. As compared to rice porridge, the maximum amounts of the amino acids Lys and Thr were increased beef-rice porridge. Sensory evaluation results showed that the beef-rice porridge with a particle size half that of rice had the highest scores in color, taste, texture, and overall preference. Based on these results, it is suggested that beef-rice porridge with a particle size half (0.7-2.5 mm) that of rice has optimal quality in terms of both physicochemical and sensory properties.
본 연구는 반복 횡하중 하에서 CFRP(Carbon Fiber Reinforced Polymer) Sheet로 보강된 철근콘크리트 프레임면내 조적벽체의 전단내력을 평가하여 국내 조적벽체 학교 건축물에 적합한 CFRP Sheet 보강 방안을 제안하는 것에 그 목적이 있다. 조적 허리벽이 있는 1층, 1경간, 1/2 스케일의 시험체를 4개 제작하여 CFRP Sheet의 보강량을 변수로 실험을 수행하였으며 이를 통하여 보강량에 따른 강도와 강성의 변화를 분석하였다. 실험 결과 CFRP Sheet는 시험체의 내력과 강성을 향상시켰으며 특히 기둥과 조적벽을 모두 보강하는 방법을 통한 보강방법에 있어 그 적용성을 확인할 수 있었다.
철근의 부식을 해결하기 위해 철근의 대체 재료로 적용 가능한 FRP에 대한 연구의 적용성이 대두되었다. 그러나 취성적인 성질과 탄성계수가 낮은 단점을 가지고 있어, FRP rebar로 보강된 휨 부재의 사용성 평가 즉 처짐에 대한 연구가 필요하다. 본 연구에서는 보강비를 변수로 한, CFRP rebar로 보강된 콘크리트 보의 휨 실험을 수행하였다. 실험 결과, CFRP rebar로 보강된 실험체는 보강비가 증가함에 따라 내력 및 강성이 증가하는 양상을 보였으며, 철근 실험체와 동일한 단면성능을 발휘하기 위해서는 약 1.3배의 보강비가 요구되는 것으로 나타났다. 또한 유효단면2차모멘트에 대한 기존 제안식의 비교 결과, Bischoff & Scanlon이 제안한 식이 가장 정밀해에 가까운 처짐을 예측하였다.
The viability of Staphylococcus aureus, a significant cause of food poisoning in Korea, on TSA plates was determined after sublethal heating treatments and NaCl treatments. In addition, recovery levels of sublethally injured cells on TSA plates containing different concentrations of NaCl (TSAS) were investigated. The viability decreased significantly with increasing degree of sublethal heating treatments, but increases in NaCl treatment concentrations from 0 to 6% had little effect on the viability. After being sublethally treated at 55oC for 30 min, bacterial populations were reduced by 7.91, 7.97 and 7.99 log CFU/mL on 2, 4 and 6% TSAS, respectively. After being sublethally treated at 60oC for 30 min, bacterial populations were reduced by 6.46, 6.47 and 6.48 log CFU/mL on 2, 4 and 6% TSAS, respectively. Decimal reduction times (D-value) decreased with increasing NaCl treatment concentrations after sublethal heating at 55 and 60oC. These data imply that the S. aureus cells sublethally injured by insufficient heating processes had a lower recovery rate with increasing NaCl concentrations in the recovery media.
프리캐스트 콘크리트 세그먼트 공법은 품질관리가 용이하고 비용 및 공사기간을 단축할 수 있으나 각 세그먼트의 조립으로 인한 접합부의 응력집중 및 큰 변위로 인해 구조적으로 불리한 거동을 보여 많은 장점에도 불구하고 폭넓은 적용에 있어 그 한계가 발생한다. 이에 본 연구에서는 구조 성능이 개선된 프리캐스트 세그먼트 접합부를 제안하고 실험을 통하여 균열 및 파괴양상, 변형률, 최대하중, 변위 연성도의 측면에서 제안한 접합부의 구조 성능을 평가하고자 하였다. 본 연구에서는 시공성 및 구조성능을 고려하여 전단키 및 포스트텐션, 강봉 등의 적용여부를 변수로 한 접합부를 제안하고 이에 대해 정적 재하 실험을 수행하였다. 실험 결과, 전단키 및 포스트텐션을 적용한 SGSP 실험체는 최대하중의 측면에서 일체형 실험체에 비해 약 86%에 준하는 내력을 보였으며 연성 측면에서는 일체형 실험체의 연성 능력 이상의 연성거동을 보임으로써 제안한 접합부의 개선된 구조성능 및 적용 가능성을 확인할 수 있었다.
구조물의 지진취약도 분석을 위해서는 평가용 지반응답스펙트럼의 선택이 중요한 영향을 미친다. 본 연구에서는 기존의 설계응답스펙트럼을 이용하여 평가된 전력설비에 대하여 등재해도 스펙트럼을 이용하여 취약도 변수를 치환하는 방법을 제시하였다. 제시된 방법을 이용하여 기존의 전력설비를 대상으로 도출된 고신뢰도저파손확률값(HCLPF)을 비교하였으며, 최종적으로 지진재해도 곡선을 이용하여 전력설비에 대한 정량적 지진위험도를 도출하였다. 결과적으로 설계응답스펙트럼을 이용한 지진위험도 평가는 전력설비의 지진위험도를 보수적으로 판단할 수 있는 것으로 평가되었다.
본 연구는 아라미드 섬유 보강 폴리머(Aramid Fiber Reinforced Polymers, 이하 AFRP)rebar로 보강된 콘크리트 깊은보의 전단강도를 평가하기 위하여 전단경간비, 보강비, 유효깊이, 주근을 변수로 총 8본의 시험체에 대한 전단 실험을 수행하였다. ACI 318-08의 스트럿-타이 모델(이하 STM)을 이용한 전단강도와 아치작용을 고려한 제안식에 의한 전단강도를 비교-평가하였으며, 그 결과 AFRP rebar로 보강한 경우, Steel rebar로 보강한 경우보다 전단강도가 증가하는 것으로 나타났다. 전단강도 산정에 있어 ACI 318-08 STM을 이용한 해석이 상대적으로 정확했으며, 실험결과를 토대로 스트럿의 크기효과를 고려한 유효압축강도 산정 모델을 제안하였다. 이를 본 실험에 적용시킨 결과 기존 기준 및 제안식을 이용한 전단강도 산정방법보다 합리적인 결과를 얻을 수 있었다.
본 연구의 목적은 중금속 흡착을 위한 방사선 그라프트 중합법에 의한 이온교환막의 성능 향상을 위한 것이다. 그라프트 체인의 이온교환기에 의해 체인이 막의 pore를 방해하여 투과유속이 크게 저하되는 문제를 해결하고자 그라프트 체인과 체인사이를 N-ethyleneglycoldimethacrylate계 가교제를 첨가하여 투과유속이 저하되는 문제를 해결하고자 했다. 이때 사용된 가교제는 길이가 서로 다른 ethylene glycol dimethacrylate (EDMA)와 diethylene glycol dimethacrylate (DDMA)를 사용하였다. GMA 막에 가교제가 첨가된 이온교환막에 술폰산기를 첨가한 막을 이용하여 중금속 이온(Pb2+) 흡착을 하였다. 술폰산기 밀도가 1.40 mmol/g인 EDMA막은 13.82 mg/g을 흡착하였고, 술폰산기 밀도가 2.14 mmol/g인 DDMA막은 17.37 mg/g의 흡착량을 보였다.
The purpose of this study is to investigate the symbolic meaning of pattern designs attached on the main building of Chungcheongnam-do Provincial Government (CPG). While most of researches mainly focused on the value and evaulation of the CPG building in terms of architectural history, relatively little insight has been gained on the symbolic meaning and nature of the pattern designs. What kind of connections are related between the emblem of Governor-General of Chosun(Korea) and those of CPG? What symbolic meanings are engraved on the pattern designs? The researcher then took up the task of elucidating symbolic meanings of patterns and their relation to the building. The existing pattern on the outer wall of the CPG building consists of the symbol of sun(太陽輪), mums(菊花輪), and angle of stairs(雁木角). According to the Japanese studies of emblems, these visual elements symbolize ‘the sun of Japan’((日の丸) or ‘the emperor’, ‘the royal family’, and ‘rays of the sun’. Based on these preliminary findings, the researcher considered the following in-depth connections: (1) relations with the emblem of Governor-General of Chosun, (2) relations with the emblems of local autonomous entity, Kyoungsung in Chosun. (3) relations with the emblem designs of the local provinces in Japan etc. In conclusion, patterns of the main building were not just an architectural decoration, but they had significant meanings utilizing design elements and methods adopted by local autonomous entities in Japan. The patterns found at the ceilling and floor of hall in the CPG building were associated with the emblem of Governor-General of Chosun. Therefore, all the patterns of the CPG building are powerful symbols that have meanings for the colonial rule by using the shape and method of city identities that Japanese local provinces had enacted. That is, it came out into the open that they were designed for special meanings that Korean and Japanese are united as a single body(內鮮一體) for a subject of the Emperor of Japan(皇國臣民).