PEBAX[poly(ether-block-amide)는 soft flexible polyether부분과 hard rigid polyamide 부분으로 이루어진 열가소성 탄소체이다. 부드러운 polyether 부분은 기체투과에 있어 높은 투과도를 제공하고 단단한 polyamide 부분은 기계적 강도가 좋고 기체 선택성 또한 우수하다. GO(Graphene oxide)는 자연계에 널리 존재하는 흑연으로부터 제조되는데 기체투과에 있어 선택적 배리어로서 작용할 수 있다. 본 연구에서는 PEBAX-GO 복합막을 GO 함량을 달리하여 제조하고 제조된 막의 물리화학적 특성, 기체투과도, 선택성에 대해 연구하였다.
본 연구에서는 침지형 정밀여과막(공칭공경 0.15㎛, CPVC)을 사용하여 에멀젼형 절삭유(MECOOL-7000, Megalube사) 수용액을 처리하였다. 막 오염을 효과적으로 감소시키기 위하여 대칭형 또는 비대칭형의 사인파형 투과유속 연속운전(Sinusoidal flux continuous operation; SFCO) 실험을 실시하였다. 분리막의 투과유속이 증가함에 따라서 막간차압이 증가하였으나, 대칭형 운전방식이 비대칭형 운전방식에 비하여 막간차압이 낮게 형성되어 막오염 제어에 효과적임을 확인할 수 있었다.
This paper develops a fishing lamp mounting system which opens or closes a mounting rack according to a fishing situation. A developing fishing lamp mounting system is designed using CAD software. Members composing the fishing lamp mounting system are modeled with finite elements based on 3D CAD model. In addition, the fishing lamp mounting system is modeled with rigid bodies. A rigid body model of the fishing lamp mounting system is interfaced with finite element component models to develop a computational model of the fishing lamp mounting system for dynamic stress analysis. This paper performs a simulation with bouncing, rolling and pitching motion which describe a very rough sea condition. This paper manufactures a fishing lamp mounting system which is designed with CAD software and analyzed dynamic stress with CAE technique.
PTMSP와 PDMS로부터 합성된 PTMSP/PDMS 그라프트 공중합체에 다공성 borosilicate를 0~5 wt% 첨가하여 PTMSP/PDMS-borosilicate 복합막을 제조하였다. 합성된 PTMSP/PDMS 그라프트 공중합체의 수평균분자량(Mn)은 460,000이었 고, 중량평균분자량(Mw)은 570,000이었으며, 유리전이온도(Tg)는 33.53°C에서 나타났다. TGA 측정에 의하면 PTMSP/PDMS에 borosilicate가 첨가되면 복합막의 감량이 작아지고 감량이 완결되는 온도도 낮아졌다. SEM측정에 의하면 PTMSP/PDMS-borosilicate 복합막 내에 들어있는 borosilicate는 1~5 μm 크기로 분산되어 있었다. 기체투과 실험에 의하면 PTMSP/PDMS-borosilicate가 첨가되면서 자유부피, 공동, 기공률이 증가하여 기체투과가 용해확산에 의한 것보다 분자체거름, 표면확산, Knudsen 확산에 의해 일어나는 경우가 점차 증가하여 H2와 N2의 투과도는 증가하고 선택도(H2/N2)는 감소하였다
The clamping of torque shear high strength bolt is induced when the pin-tail is broken. Sometimes the clamping forces on slip critical connections do not meet the required tension due to torque coefficient dependent on conditions such as outdoor temperature, moisture and dust. From this study, the clamping forces of torque shear bolts at indoor conditions were compared with actual data investigated from 24 construction sites last five years. Similarly to foreign literature results, torque shear bolts showed that torque coefficients were fluctuated greatly by temperature conditions. The range of torque coefficient at indoor conditions was analyzed from 0.126 to 0.158 while tensions were indicated from 179 to 192 Nㆍm. Instead, the range of torque coefficient at site conditions was analyzed from 0.118 to 0.152. Based on this test, the variable trends of torque coefficient subjected temperature can be traced via statistic regressive analysis. In case of indoor conditions, it was showed that the variable of torque coefficient was 0.13% per 1℃, while the variable at actual site conditions reached 2.73% per 1℃.
According to the generalization of mobile device use in our life, the complexity and diversity of mobile applications are increased, and thus the importance of application test to find faults and errors quickly and easily before release grows. This paper reviews the current automatic testing methodologies for mobile device applications and their element technologies. Also, well-known commercial tools for automatic testing are surveyed and case studies of their recent industry applications in domestic and foreign countries are performed.
The objective of this study is to provide mobile application developers with a standard testing system and service method. By using this testing service, the developers can test the functional performance and quality of their applications from remote sites through Internet. This service standard helps to test applications quickly, easily, and cheaply through the intuitional scenario graphical environment, and becomes a base for constructing a testing system which can be shared by developers, users, and the third parties.
현재 서울시의 아스팔트 포장도로의 수명은 20~30년이다. 기존 포장의 지지력에 기반을 둔 덧씌우기 포장의 수명은 이보다 더 짧다. 이에 따른 본 연구는 MEPDG를 활용한 아스팔트 포장 카탈로그 설계법 개발로서 서울형 설계법을 총 3가지 카탈로그(버스전용차로(Ⅰ), 버스전용차로가 운영되는 도로의 일반차 로(Ⅱ), 버스전용차로가 운영되지 않은 도로의 일반차로(Ⅲ))로 분류하여 연구를 진행하였다. 서울시의 각 도로의 종류에 따른 포장 두께는 다음과 같다. 일반차로 약 100mm~260mm를 보이며 130, 160, 180mm가 가장 일반적인 두께로 조사되었다. 반면, 버스전용차로는 약 140mm~290mm를 보 이며 170, 200, 220mm가 가장 일반적인 두께로 조사되었다. 이를 기반으로 본 연구에서는 영국의 포장 설계 카탈로그에 나온 각 도로별 포장두께를 비교하였다. 이를 조사한 결과 현재 한국의 버스전용차로의 아스팔트 포장 두께는 89mm가 부족하고, 일반차로의 아스팔트 포장두께는 84mm가 부족하였다. 덧씌우기 포장의 수명은 서울시의 경우 6.6년이다. 이는 일반국도의 수명인 10년에 비해 3.4년이 짧다. 전체 도로 중 45%가 조시파손이 생기며 이는 4~5년 이내에 발생한다. 조기파손을 구조적인 측면에서 조 사한 결과, 단기 공용성(덧씌우기 수명 5년 미만)의 10개 구간 중 5개의 구간에서 Crack Depth Ratio(CDR)이 1로 조사되었다. 이중 구조적으로 아스팔트 두께가 최대 145mm가 필요한 구간도 있었다. 반면 장기 공용성(덧씌우기 수명 10년 이상)중 가장 큰 CDR 값이 0.6이며 이 중 아스팔트 두께가 최대 95mm가 필요한 구간이 있다. 본 설계법은 도로의 다양한 교통 특색(연간 일일 평균 교통량, 차종별 분포 율 등), 노상층의 상태, 신규재료의 물성값을 MEPDG 프로그램에 활용하여 정립하였다.
PEBAX[poly(ether-block-amide)]에 NaY zeolite를 첨가하여 PEBAX-NaY zeolite 복합막을 제조하고 제조한 복합 막에 대한 C3H6와 C3H8의 투과도와 선택도(C3H6/C3H8)에 대하여 조사하였다. SEM관찰에 의하면 PEBAX-NaY zeolite 복합 막 내에 NaY zeolite는 0.5∼2.5 μm의 덩어리 상태로 분산되어 있었다. TGA측정에 의하면 PEBAX에 NaY zeolite가 첨가되 면 첨가된 NaY zeolite 양만큼의 질량 변화를 알 수 있었다. 기체투과 실험에 의하면 PEBAX-NaY zeolite 복합막 내의 NaY zeolite함량이 증가할수록 C3H6와 C3H8의 투과도는 감소하였고, C3H6의 투과도는 C3H8의 투과도보다는 크게 나타났으며, 기 체선택도(C3H6/C3H8)는 감소하는 경향을 나타내었다.
We prepared 8 samples of non-silver and silver-added master alloys containing silicon to confirm the existence of nickel-silicides. We then prepared products made of 14K and 18K white gold by using the prepared master alloys containing 0.25, 0.35, and 0.50 wt% silicon to check for nickel release. We then employed the EN 1811 testing standard to investigate the nickel release of the white gold products, and we also confirmed the color of the white gold products with an UV-VISNIR- color meter. We observed NiSix residue in all master alloys containing more than 0.50 wt% Si with EDS-nitric acid etching. For the white gold products, we could not confirm the existence of NiSix through XRD after aqua regia etching. In the EN 1811 test, only the white gold products with 0.25 wt% silicon master alloys successfully passed the nickel release regulations. Moreover, we confirmed that our white gold products showed excellent Lab indices as compared to those of commercial white gold ones, and the silver-added master alloys offered a larger L index. Our results indicate that employing 0.25 wt% silicon master alloys might be suitable for white gold products without nickel-silicide defects and nickel release problems.
Fe2O3 coated plate mica(Fe2O3/mica) for infrared reflectance red pigment was prepared under hydrothermal treatment. Fe2O3 was perfectly coated on mica via the difference of surface charge between Fe2O3 and mica particles at pH 3. Fe2O3/mica was then calcined at 800 oC to stabilize the coated layer on mica. The infrare (IR) reflectance pigments were characterized by X-ray diffraction, FE-SEM, zeta potential, and a UV-Vis-NIR spectrophotometer. In particular, the CIE color coordinate and IR reflectance properties of Fe2O3/mica pigments were investigated in relation to the thickness variation of the Fe2O3 layer coated on mica of various lateral sizes. The isolation-heat red paints containing the pigments were prepared and optimized with a thinner, settling agent, and dispersant. Then, the films were made. The thermal property of isolation-heat on these films was observed through the relationship of the IR reflectance value, which was based on the variation of the Fe2O3 layer’s thickness coated on mica and mica’s lateral size as IR reflectance pigment. With an increase in IR reflectance on these films, the thermal property of isolation-heat was effectively enhanced.
3D-based BIM(Building Information Modeling) technologies can be utilized effectively as a means of systematic management of facility information for safety assurance and effective maintenance of waterworks facilities. In this study, BIM models of water treatment facilities that can be used as basic data for BIM-based maintenance of waterworks facilities were developed. Information exchange and generality of the developed BIM models were evaluated by conducting interoperability analysis of IFC(Industry Foundation Classes) conversion models. In addition, the application of COBie(Construction Operations Building information exchange) was recommended as an effective countermeasure to deal with technical limitation regarding exchange and utilization of facilities-related information through current IFC models. The results of this study can contribute to the development of BIM-based maintenance system for waterworks facilities.
The objectives of this study were to characterize the factors affecting exposure to the VOCs and NO2 in the vicinity of Gwangyang industrial complex. The VOCs and NO2 levels were measured for residents of an exposure group (industrial area within 5 km) and a control group (15 km farther), respectively using the VOCs and NO2 filter badge as a passive sampler from August to September 2006. The means of indoor, outdoor, workplace and personal exposure levels of benzene were 1.10 ppb, 0.94 ppb, 1.85 ppb and 2.35 ppb respectively in the exposure group. The means regarding toluene for the exposure group were 9.29 ppb indoor, 8.09 ppb outdoor, 14.5 ppb workplace, 14.2 ppb personal exposure. The means regarding ethylbenzene were 4.96 ppb(indoor), 4.45 ppb(outdoor), 6.84 ppb (workplace), 6.10 ppb(personal exposure), and the means regarding xylene were 0.10 ppb(indoor, outdoor), 0.18 ppb(workplace) 0.17 ppb(personal exposure). The means for the indoor, outdoor, workplace and personal exposure level of NO2 were 18.40 ppb, 18.51 ppb, 18.59 ppb, 18.80 ppb respectively in the exposure group. Correlations between personal exposures and workplace concentrations of individual VOCs and NO2 exposures, and each of the microenvironment was statistically significant.
송아지 조기 이유는 반추위 발달을 포함하여, 성장과 고기의 육질 형성에 밀접한 관련이 있다. 이유 전 올바른 영양 관리 및 사료 급여에 대한 기초 기반 연구를 위하여 한우 송아지 이유용 사료 급여에 따른 반추위 발달에 미치는 영향을 조사하였다. 한우 송아지 총 17두를 공시축으로 하여 사료급여 체계에 따라 4개의 그룹으로 나누었으며, 그룹 1은 분유, 농후사료를 급여하였고, 그룹 2는 분유, 농후사료, 조사료, 그룹 3은 분유, 농후사료, 전분, 그룹 4는 관행적인 대조구로 모유를 급여하였다. 그룹별 사료 섭취량은 그룹1, 2, 3 각각 0.9 kg/d, 0.88 kg/d, 0.87 kg/d였고, 그룹2에는 조사료 티모시 0.18kg/d를 추가적으로 급여하였다. 사료 에너지가는 그룹 1, 2, 3 공통적으로 DM 88%, CP 15%, TDN 68% 수준이고, 그룹 3은 전분 30%를 추가 공급하여 TDN 함량을 73%로 높였다. 어미젖을 포유한 후 2주령 후부터 10주령까지 8주간에 걸쳐 각 사료 체계에 따라 급여 후, 각 그룹으로부터 반추위를 적출하여 반추위의 유전자 발현을 분석 하였다. 상피 세포의 성장과 관련이 있는 KRT4 유전자는 그룹 3에서 높은 발현을 보였고, 각종 염증성 질환에 대한 면역 반응과 관련이 있는 BPIFA1 유전자는 그룹 1, 3에서 발현이 증가함을 확인할 수 있었으며, 반추위 발달에 중요한 역할을 하는 ACAT1 유전자는 조사료를 급여한 그룹 2에서 발현율이 높게 나타났다. 결과적으로 송아지 조기 이유 및 양질의 조사료 급여는 반추위 발달에 긍정적으로 작용하며, 이를 실험 결과를 통하여 유전자 발현 수준에서 확인 할 수 있었다.
목 적 : Q-MRA의 검사는 주로 뇌혈관질환 환자를 대상으로 수술 전후로 검사하여 수술의 성공 여부와 질환의 재발 가능성을 평가하기 위해 시행한다. 이밖에도 밝혀지지 않은 뇌혈류 질환이 의심되는 환자에게도 시행하여 비침습적으로 좀더 빠른 진단을 돕고자 검사를 시행한다. QMRA의 경우 뇌혈관 질환의 정량적 혈류량 평가가 이루어질 수 있다는 장점이 있지만, 검사과정 중 혈관의 contours를 그려서 혈류량을 평가하게 된다. 이러한 경우 환자의 질환, 상태, 호흡, 맥박, 검사자의 숙련도 등의 오차로 가동적인 혈관의 contours를 정확하게 평가하기 어렵다. 본원에서는 이러한 오차를 줄이고 정확한 contours를 그리고 정량적 검사를 시행하기 위해 Auto program contours 검사법 대신 Manual program contours검사를 시행하고 이를 평가하였다.
대상 및 방법 :
1. 검사장비
•MRI 장비 : Achive 3.0 TX(Philips medical system)
•신호수집 coil : 32 channel head coil.
•혈류량 측정:Non-invasiveOptimalVessleAnallysis( NOVA7.0.3 T3, VaSol)
•혈관직경의 비교측정 : Philips work station
2. 검사대상 : 2013년 11월부터 2013년 12월까지 본원에 뇌혈관 질환과 관련 있는 의심 환자(stent insert post-operation surgery 환자와 aneurysm clipping post-operation 환자를 포함한) 16명(남자:8명, 여자:8명, 평균연령은 62.0세)를 대상으로 본 검사를 시행하고 평가 했다.
3. 검사방법 : Q-MRI에서는 phase contrast image를 사용하여 NOVA 장비를 이용해 각각의 CCA, VA의 직경을 auto와 manual로 측정하고 flow rate을 비교하였다. 혈관 직경은 Philipsworkstation에서 측정된 값을 기준으로 비교 분석했다.
결 과 : Auto contours와 Manual contours를 비교분석한 결과는 다음과 같다. Philips wortkstation에서 측정된 혈관 직경을 기준으로 CCA의 Auto contours 평균오차(직경)는 10.35%, Manual contours 평균오차(직경) 5.14% 이었다. 그에 따른 Auto flow rate 평균값 380.06(ml/sec), Manual flow rate 평균값376.71(ml/sec) 이었다. BA의 Auto contours 평균오차(직경) 14.59%, Manual contours 평균오차(직경) 9.97% 이고 그에 따른 Auto flow rate 평균값 125.65(ml/sec), Manual flow rate 평균값 125.71(ml/sec) 이었다. CCA에서 contours의 직경 5.21%만큼의 오차에 따라 diameter에 변화가 생겨 오차가 적은 Manual과 비교하여 flow rate도 1.02%만큼의 변동이 있었고, BA에서 contours의 직경 4.62%만큼의 오차에 따라 diameter에 변화가 생겨 Manual과 비교하여 flow rate도 약 -0.72%만큼의 변동이 있었다
결 론 : QMRA 검사시 flow rate는 뇌혈관 질환 환자들에게 있어 중요한 기능적 검사이다. 이로 인하여 병변부 재발의 가능성과, 앞으로 생길 수 있는 질환의 예방 목적으로 많이 이용되는 검사이다. flow rate에서 혈관의 diameter의 중요한 factor이고 이를 정확하게 구하는 것은 정량적 검사의 목표이기도 하다. Manual contours 작업시 혈관직경의 오차가 줄어들었지만 혈류량에는 크게 변화가 없었다. 하지만 Philips Work station과 Manual contours 작업의 혈관직경의 오차가 Auto contours작업의 혈관직경 오차보다 작은만큼 보다 정확한 정량적 혈류량 검사가 이루어질 수 있다고 사료된다.
This study investigated the antioxidative properties of Yangha Buds (Zingiber Mioga R) and quality characteristics of Korean steamed-rice cake, Sulgidduk, prepared with Yangha Buds juice. Antioxidative activities were measured based on DPPH radical and ABTS radical scavenging activities, total phenol content, and total flavonoid content in Yangha Buds (water extract and juice). Sulgidduk was prepared by adding Yangha buds at concentrations of 0, 1, 2, 3, and 4% of juice. To analyze quality characteristics, proximate composition, color, texture profiles, and sensory evaluations were measured. As content of Yangha buds juice increased, L-value significantly decreased while a-value and b-value increased (p<0.05). For texture profiles, control group scored higher score for hardness as compared to groups added with Yangha buds juice. Springiness, chewiness, and adhesiveness were not significantly different among the groups. In the sensory evaluation, samples containing 3% Yangha buds juice showed better results for attitude. Based on these results, we suggest that Yangha buds are a good ingredient for increasing consumer acceptability and functionality of Sulgidduk.
PTMSP[Poly(1-trimethylsilyl-1-propyne)]에 TEOS (tetraethoxysilane), TMOS (tetramethoxysilane), MTMOS (methyltrimethoxysilane), 그리고 PTMOS (phenyltrimethoxysilane)의 함량을 0, 15, 20, 30 wt%로 달리하여 졸-겔법을 이용하 여 PTMSP-silica 복합막을 제조하였다. PTMSP-silica 복합막의 알콕시실란 함량에 따른 H2, N2의 기체투과도와 N2에 대한 H2의 이상 선택도를 조사하였다. H2와 N2의 투과도는 알콕시실란 함량이 0∼20 wt% 범위에서는 증가하다가 알콕시실란 함 량이 20∼30 wt% 범위에서는 감소하였다. N2에 대한 H2의 이상 선택도는 TEOS와 PTMOS의 함량이 0∼15 wt% 범위에서 는 감소하였으며, 15∼30 wt% 범위에서는 다시 증가하였다. Robeson upper bound와 비교할 때, PTMSP-silica 복합막은 TEOS 함량이 30 wt%, MTMOS 함량이 20 wt% 그리고 PTMOS 함량이 30 wt%에서 투과도와 이상 선택도가 동시에 향상된 것으로 나타났다.
Some researchers have been the effect of people petting a dog while measuring their brain waves using an EEG recorder. However, until now, there was little information on the effects of petting a dog. This study investigated the effects of petting a companion dog on electrical activity in the brain as evaluated by an electroencephalogram(EEG). The subject was 23 healthy male young adult. EEG electrodes were attached at the frontal, temporal, occipital, and parietal lobes according to the international 10-20 system. The subject conducted petting a retriever dog for a period of 3 minutes each before, and after petting a dog. The activity of petting a dog decreased the alpha power/beta power ratio on the frontal and parietal lobes of the brain. These decreases induced by the increased beta power. The increased beta power induced the enhancement of brain activity. It is concluded that petting a dog increases the state of activity in the brain; alpha powers/beta powers ratio was increased in the brain of subject. This is expected to be utilized to activate the brain areas for creativity of the subjects.