검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 7,686

        1884.
        2016.11 구독 인증기관 무료, 개인회원 유료
        When weapon system is designed and developed, a reliability is one of important factors to determine the development goal. The reliability analysis of the weapon system and equipment is based on MIL Specification, MIL-HDBK-217F and MIL-HDBK-338B. And the weapon system is operated on various environments by operating concept of the military using the weapon system. This study, at first, present failure rate by PSA comparing with failure rates by PCM, the different reliability analysis method, for same CCA(Circuit Card Assembly). And the study present change of reliability analysis results for CCA on various operation environment condition..
        4,000원
        1890.
        2016.11 구독 인증기관·개인회원 무료
        PVDF Membrane has been used as material for the UF membrane through in-situ interfacial polymerization (IP) because of it’s outstanding properties such as high chemical resistance, thermal stability, and mechanical strength. In this study, surface morphology change of PVDF membrane was researched depending on evaporation time. 13% PVDF 6020 was used for casting and the evaporation time period was from 5s to 600s. The surface morphology of the membrane was investigated by scanning electron microscopy (SEM) and filtration was conducted in the cross flow method to evaluate the a performance of UF membrane. As a result, average pore size was increased with longer evaporation times which caused the decrease of rejection.
        1891.
        2016.11 구독 인증기관·개인회원 무료
        본 연구에서는 친수성을 가지고 있으며 외부 온도에 따라 형태를 변하는 특성을 가지는 N-isopropylacrylamide (NIPAM)를 이용하여 상용화 된 정삼투막인 HTI 분리막에 표면 개질을 하고 그에따른 표면 및 투과 특성 변화를 고찰 하고자 한다. 표면 개질을 확인 하는 방법으로 푸리에 변환 적외선 분광기 (FT-IR) 및 광전자분광기 (XPS)를 이용하였으며, 이러한 표면 개질이 정삼투 공정에 미치는 영향을 알아보기 위하여 표면의 친수성을 측정 할 수 있는 접촉각 측정 및 수투과도/Reverse salt flux와 같은 투과 특성 평가를 이용 하였다. 위와 같은 표면 및 투과 특성 평가를 바탕으로 성공적으로 표면 개질을 되었음을 증명 할 수 있었다.
        1892.
        2016.11 구독 인증기관·개인회원 무료
        기후변화에 따른 수자원 불균형 문제의 해결을 위해 최근 역삼투막 공정을 이용한 해수 담수화 시설 등이 다양하게 고려되고 있다. 본 연구에서는 역삼투 막의 막오염을 제어하기 위해 화학세정을 실시할 때, 세정효율과 오염막 표면의 잔류물질과의 상관관계를 규명하고자 공업용수 생산에 사용된 RO 막의 화학세정 전⋅후의 막표면 분석을 진행하였다. 막표면에 존재하는 주요 오염물은 미생 물에서 유래된 유기물로 나타났으며, 전형적인 화학세정 결과 대부분의 막표면 유기물이 제거되어 RO 막의 초기 성능이 회복되었다. 그러나 고분자 구조의 방 향족 유기물 특성을 나타내는 미생물 유래물질은 세정후에도 막표면에 잔류하는 것으로 나타나 장기적인 역삼투막 운전을 저해할 것으로 판단된다.
        1893.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 멸종위기식물인 섬시호를 대상으로 기후변화의 원인인 CO2+온도상승과 식물의 생육 및 분포에 중요한 광, 수분, 영양소를 조합 처리하여 지구온난화에 대해 어떻게 반응하는지 알아보고, 기후변화환경 하에서의 보전방안을 마련하고자 하였다. 실험은 야외의 CO2 농도와 온도를 반영한 대조구와 유리온실에서 대조구보다 CO2 농도가 약 2배, 온도가 약 2°C 높게 유지한 CO2+온도상승구로 구분하여 2010년부터 2011년까지 생육시켜 관찰하고 비교하였다. 섬시호의 생육반응은 광, 수분, 영양소보다 CO2+온도상승의 영향을 더 많이 받았고, CO2+온도상승구에서 영양소가 많은 조건일 때 잘 자랐다. 잎 수는 대조구에 비해 CO2+온도상승구에서 광이 낮은 구배와 영양소가 높은 구배에서 많았고, 잎 폭은 대조구에 비해 CO2+온도상승구에서 광과 영양소가 중간 구배에서 좁았다. 그러나 지상부 길이, 잎몸 길이 그리고 잎자루 길이는 대조구와 CO2+온도상승구 간에 차이가 없었다. 본 연구결과를 토대로 미래기후환경 하에서 섬시호의 보전을 위해서는 섬시호 자생지에 NH4 +, NO3, P2O5, K2O 등이 포함된 영양소를 공급하고, 섬시호 자생지가 파괴되지 않도록 하여야 한다. 또한 섬시호의 자생지와 유사한 환경조건을 가진 곳을 발굴하여 복원함으로써 서식지를 확대하여야 한다.
        4,000원
        1894.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, we analysed the influence of the flow and performance of the generated micro gas turbine with different rotational speeds. CFD analysis was also performed using commercial code called ANSYS CFX 14.5. It adopted the turbine of radial flow type suitable for power generation for small rotating equipment. The number of blades was designed with each radial turbine 8, vane nozzle 14. The boundary layer flow analysis was widely used to the SST model. Mass flow rate of the turbine was 1.45 kg/s. While the rpm varies from 38,000rpm to 48,000rpm under various boundary conditions, the distributions of Mach number and pressure were numerically analyzed for electric power output, turbine isentropic efficiency. We analyze the inlet pressure, outlet temperature, electric power output, turbine isentropic efficiency. It compared maximum and minimum revolution through CFD analysis. Power output of maximum revolution has been increased 18% more than minimum revolution. Isentropic efficiency of maximum revolution has been increased 16.5% more than minimum revolution. Therefore, maximum power output was 332kW, amaximum isentropic efficiency was 33.2%.
        4,000원
        1895.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently, car industry trend is downsizing, a lean-burn engine, green car and cost cutting. A turbocharger is the key components to improve fuel efficiency and power. This research is to study on the flow analysis in the performance analysis for change rotating speed of turbocharger turbine with three different rotating speed in the turbine. After measuring real design features, modeling, velocity distribution, pressure distribution and temperature distribution are conducted numerically. Torque and power are compared with three different cases in order to analyze the performance for turbine. Finally, optimum power is determined with the sequence of case 1, case 2, and case 3.
        4,000원
        1896.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In women’s clothing the shoulders are distorted and exaggerated. Consequently, the wearers’ bodies are transformed and interpreted according to modern standards. We therefore refer to this aspect of women’s clothing as the power shoulder. This study aims to analyze the differences in sensibility images on variations in the shoulder shape of power shoulder jackets. Nine samples were examined that involved combinations of three variations of the shoulder height and three variations of the shoulder width. The data was evaluated by 123 fashion design majors. Four factors were selected: attractiveness, personality, activity, and self-respect. Among these factors, attractiveness is the most important. The study results indicated that changes in shoulder height acted as a major effect that had an independent influence on all four factors. In contrast, changes in shoulder width acted as a major effect that had an independent influence on attractiveness, personality, and activity but not on self-respect. It also had an influence on the interaction effect of attractiveness, personality, activity, and self-respect. We anticipate that this study will help individual customers select clothing that is suitable for their preference and body shape because it is now possible for them to estimate images of power shoulder jackets.
        4,000원
        1897.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A lean alloy is defined as a low alloy steel with a minimum amount of the alloying element that maintains the characteristics of the sintered alloy. It is well known that the addition of elements such as Cr, P, Si, or Mn improves the mechanical characteristics of the alloy, but decreases the sinterability. The mother alloy is used to avoid an oxidation reaction with the alloying elements of Cr, P, Si or Mn. The purpose of this study is to determine the change in the mechanical properties of Fe-P-Mo and Fe-P-Mn alloys as a result of the addition of Si. In this article, the Fe-P-Mo and Fe-P-Mn alloys to which Si is added are compacted at 7.0 g/cm3 and then sintered in H2-N2 at 1120℃. The P around the macropores and large grains reduces due to the formation of SiO2 as the Si content increases. This is caused by the increase in strength owing to reducing intergranular fracture by suppressing the reaction with oxygen.
        4,000원
        1898.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 Co-Rotational plane beam transient analysis EDISON program(CR-보)를 이용한 에어포일 단면형상 변화 에 따른 진동특성 연구를 수행하였다. Co-Rotational 평면 보 해석은 대 회전과 작은 변형률을 갖는 보 해석에 적합하다. 항 공기의 날개를 외팔보로 가정하여, VABS를 통한 단면해석과 Fourier 변환을 통해 각 단면형상 변화에 따른 에어포일의 고 유진동수를 비교하였다. VABS를 사용하여 단면의 형상과 재료의 적층 정보를 고려한 단면에서의 유한요소 해석을 수행하 였다. 에어포일의 재질, spar 유무, 단일 등방성 재료·복합재료, 에어포일 최대두께의 변화에 따라 에어포일의 끝단 진폭과 고유진동수가 변화함을 확인할 수 있었다. 이를 바탕으로 에어포일 고유진동수 변화는 2차 관성모멘트/단면적, 밀도, 영률의 변화에 상당한 영향을 받음을 알 수 있었다.
        4,000원
        1899.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 계란을 난백과 난황으로 분리하여, 액란 상태에서 8, 10, 15, 25, 35℃의 보관온도가 S. Enteritidis와 S. Typhimurium 두 혈청 형의 증식 또는 사멸패턴에 미치는 영향을 비교 분석하였다. 난백에서는 8, 10, 15, 35℃에서 두 혈청 형 모두 감소하였으나 25℃에서는 두 혈청 형 모두 증식 하여 상온에서의 관리에 대한 주의가 필요한 것으로 나타났다. 반면 10, 15, 25, 35℃ 난황에서는 두 혈청 형 모두 성장하였으나 8℃에서는 감소하여 유통·판매시 난황으로 준비된 액란을 냉장온도로 철저하게 관리해야 할 것으로 판단된다. 난황에서 증식한 S. Enteritidis와 S.Typhimurium의 성장곡선을 Modified Gompertz model에 적용하여 산출된 유도기(LT)와 최대증식속도(SGR) 및 최대개체군밀도(MPD)값을 Davey model과 Square-root model 및 Polynomial second order model을 이용하여 각각 온도의 영향을 나타내는 2차 모델을 개발하였다. 모든 온도에서 S. Enteritidis가 S. Typhimurium보다 유도기가 짧고 최대증식속도가 빠르게 나타나 액란 제품에서의 S. Enteritidis에 대한 위험성이 더 큰 것으로 나타났다.
        4,000원
        1900.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        우리는 심각한 열스트레스 및 서로 다른 사료 에너지 급여가 사료 소화율 변화에 미치는 영향과 심각 한 열스트레스 조건에서 유지를 위한 에너지 요구량을 설정하기 위해 한우 육성기 거세우 4두(평균체중 200±11.7kg)를 이용하였다. 사료 처리는 서로 다른 에너지 공급을 위해 4 시험구(TDN 기준, 쾌적한 상태 하에서 한국사양표준 한우 육성우 에너지 요구량의 100%(대조구), 심각한 열스트레스 하에서 에너 지 100%(E100), 115%(E115), 130%(E130)로 나누어 4×4 라틴 방각법으로 수행하였다. 온도 및 습도에 노출한 열스트레스 조건을 위해 대조구는 쾌적한 온습도지수(THI)=71.5, 나머지 3개 처리구는 THI=81.4로 심각한 스트레스 수준으로 설정하였다. 심각한 열스트레스는 진정 건물소화율을 유의적으 로(p<0.05) 감소시켰으며(대조구 81.5 vs E100 79.1, E115 77.0 및 E130 76.0%), 사료에너지 공급 수 준의 증가는 건물소화율의 감소를 가져오는 것으로 나타났다. 심각한 열스트레스 및 서로 다른 사료 에 너지 급여 수준은 혈중 생리대사물질 함량 및 체온 변화에 유의적인 영향을 미치진 않았다(p>0.05). 본 연구를 통해 심각한 열스트레스 하에서 육성기 한우거세우의 유지를 위한 에너지 요구량은 Y=0.235X+115.03과 같은 산정식으로 계산될 수 있으며, 이러한 결과는 육성기 한우거세우에게 열스트 레스 하에서 체중변화없는 유지 에너지 요구량을 만족시키기 위해서는 현재 한국사양표준 대비, 사료 에너지 15.03%를 더 공급해야 할 것으로 판단된다.
        4,000원