최근 막여과 정수처리에 대한 관심이 높아지고 있으나, 공정설계를 위한 소프트웨어가 널리 보급되어 있지 않아서 현장적용의 어려움이 발생하고 있다. 본 연구에서는 막여과 정수처리 공정설계를 지원할 수 있는 프로그램과 설계기법을 개발하고자 하였다.

The vertical design spectrum for Korea, which is known to belong to an intra-plate region, is developed from the ground motion records of the earthquakes occurred in Korea and overseas intra-plate regions. From the statistical analysis of the vertical response spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. The developed design spectrum is valid for the estimation both spectral acceleration and displacement. The ratio of vertical to horizontal response spectrum for each record is calculated. Statistical analysis of the ratios rendered the vertical to horizontal ratio (V/H ratio). Subsequently the ratio between the peak vertical ground acceleration to the horizontal one is obtained.

The design spectrum for Korea, which is known to belong to an intra-plate region, is developed from the ground motion records of the earthquakes occurred in Korea and overseas intra-plate regions. The horizontal spectrum is defined as geometric mean spectrum, GMRotI50. From the statistical analysis of the geometric mean spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. The developed design spectrum is valid for the estimation both spectral acceleration and displacement.

The vehicle weight and alternative light materials development like aluminum alloys are hot issues around the world. In order to obtain the goal of the weight reduction of automobiles, the researches about lighter and stronger suspension links have been studies without sacrificing the safety of automotive components. Therefore, in present study, the structure analysis of the torque strut links made by aluminum alloys (A356) was performed by using CAE (computer aided engineering) to investigate the light weight design process from the reference of the rear suspension torque strut link which was made by STKM11A steel and was already proven in the commercial market. Especially, the simulated maximum von Mises stresses after strength analysis were normalized as fatigue limit and these were converted to the WF (weight factor) of the same type as the fatigue safety factor suggested and named like that in present study. From these, it was suggested that the fatigue properties of the torque strut could be simply predicted only from this static CAE simulation.

최근에 각광받고 있는 3D BIM기반 철근 물량 산출 현황을 살펴보면 상용 BIM 도구들이 철근 모델링 기능을 제공하지만 그 기능을 이용해서 철근을 모델링하려고 하면 방대한 양의 모델링 시간이 소요가 되어 현재 실용적으로 사용할 수 있는 BIM 소프트웨어는 없다. 본 연구에서는 BIM 기반 설계 현업에서 실용적인 철근 물량 산출 프로세스를 정리 및 제시하고, 초기설계단계의 단면 정보가 없는 상태에서 기존의 2D방식에 비하여 보다 정확하게 기동, 보, 슬래브, 벽체의 철근 단면 정 보를 자동으로 배근해주는 프로그램인 Rebar Automatic Arrangement Program(이하 RAAP)을 개발하였다. 본 연구 결과는 건설프로젝트의 초기 설계단계에서 설계 진행상 구조 부재 단면 설계가 완료되지 않은 상태의 골조 물량 산출 시 적은 노력 으로 기존의 2D기반 방식보다 신뢰성을 향상시킨 물량을 산출할 수 있는 기술로 발전시키는데 의미가 있으며, 합리적인 초 기 설계단계의 물량 산출 프로그램을 구축할 수 있는 기초 연구로서 활용될 수 있을 것으로 기대된다.

Recently, in construction vehicles like exacavator, many customers demand the interior parts to be convenient and handy to operate. Futermore, that parts had to be more lightweight and better quality and durability. For this reaseon, the combination switch, a part for operation of head lamps, wipers, horn, etc, had been designed as a new lightweight structure by using PA plastics material and had been changed the mechanical contact into electric non-contact by using Hall IC and FET.

Sea cucumber, Stichopus japonicas, is widely used in East Asia as a traditional medical component for the treatment of asthma, arthritis, and sinus congestion. The hydrolysate of sea cucumber after treating with a protease is also widely used as an ingredient for the processed food application such as noodles. Tensile force and deformation are important texture properties of noodle. The peptides prepared by hydrolyzing sea cucumber could affect the tensile properties of noodle as well as DPPH radical scavenging. The objectives of this study were to characterize the tensile properties, the texture properties, color, and DPPH radical scavenging of noodle with the hydrolysate of sea cucumber and to determine an optimum formulation of dough with the hydrolysate of sea cucumber for noodle. The hydrolysate of sea cucumber was prepared by hydrolyzing dried sea cucumber powder with distilled water and a protease, Protamex (Novozyme Nordisk, Bagsvaerd, Denmark). Tensile test was used for measuring the breaking strength and the breaking distance of noodle. The tensile properties and antioxidant activity (DPPH radical scavenging) were used as major constraint functions for the optimization. Central composite design was used to determine the experimental points for the optimization. Quadratic models were developed to represent the constraint functions. The optimum ratio was determined to flour: water: the hydrolysate of sea cucumber = 69.27: 22.48: 7.05% (w/w). Increasing the amount of hydrolysate of sea cucumber in the formulation increased the tensile force but no significant difference was observed in the deformation. The hydrolysate of sea cucumber was successfully applied to a noodle formulation without degrading the major quality indices of noodle with enhancing the antioxidant activities.

This study proposes a methodology to analyse social networks among participating design engineers during product development projects. The proposed methodology enables product development managers or the participating design engineers to make a proper decision on product development considering the performance of participating design engineers. It considers a product development environment where an integrated product data management (PDM) system manages the product development data and associated product development processes consistently in its database, and all the design engineers share the product development data in the PDM database for their activities in the product development project. It provides a novel approach to build social networks among design engineers from an operational product development data in the PDM database without surveys or monitoring participating engineers. It automatically generates social networks among the design engineers from the product data and relationships specified by the participants during the design activities. It allows analysts to gather operational data for their analysis without additional efforts for understanding complex and unstructured product development processes. This study also provides a set of measures to evaluate the social networks. It will show the role and efficiency of each design engineers in the social network. To show the feasibility of the approach, it suggests an architecture of social network analysis (SNA) system and implemented it with a research-purpose PDM system and R, a statistical software system. A product configuration management process with synthetical example data is applied to the SNA system and it shows that the approach enables analysts to evaluate current position of design engineers in their social networks.

GSA (Gaming Standards Association)’s S2S (System to System) standard provides harmonizing protocol between any gaming and non-gaming host systems in the casino back office and Casino business area. Its technical details and implementation is rarely open to the academy and public. This paper discuss our ongoing implementation of S2S protocol engine and systems, which is, to our knowledge, the first case in Korea. Our design leverages open source technologies such as Linux, Python, Django, Tornado, JQuery, and lxml. Describing the architecture and an application scenarios of ‘PlayerInfo’ class, we demonstrate how the open source technology can be utilized in the S2S system design.

This paper dealt with the applicability of GFRP materials as reinforcements for a steel box girder bridge deck. The purpose of this study is to provide detailed design procedures with a code-based text for GFRP composites for civil engineering structures. From the example design, the deck was optimized from a serviceability perspective but was quite overdesigned with regard to flexural strength and creep rupture stress, due to its relatively low longitudinal modulus but high strength. We may conclude from these results that it is advisable to check the serviceability limits before optimizing the design for strength or starting the design from the serviceability calculation.

Control Chart is a graph which dots the characteristic values of a process. It is the tool of statistical technique to keep a process in controlled condition. It is also used for investigating the state of a process. Therefore many companies have used Control Chart as the tool of statistical process control (SPC). Products from a production process represent accidental dispersion values around a certain reference value. Fluctuations cause of quality dispersion is classified as a chance cause and a assignable cause. Chance cause refers unmanageable practical cause such as operator proficiency differences, differences in work environment, etc. Assignable cause refers manageable cause which is possible to take actions to remove such as operator inattention, error of production equipment, etc. Traditionally x-R control chart or x-s control chart is used to find and remove the error cause. Traditional control chart is to determine whether the measured data are in control or not, and lets us to take action. On the other hand, RNELCC (Reflected Normal Expected Loss Control Chart) is a control chart which, even in controlled state, indicates the information of economic loss if a product is in inconsistent state with process target value. However, contaminated process can cause control line sensitive and cause problems with the detection capabilities of chart. Many studies on robust estimation using trimmed parameters have been conducted. We suggest robust RNELCC which used the idea of trimmed parameters with RNEL control chart. And we demonstrate effectiveness of new control chart by comparing with ARL value among traditional control chart, RNELCC and robust RNELCC.

NSS (Navigation satellite system) provides the information for determining the position, velocity and time of users in real time using satellite-networking, and is classified into GNSS (Global NSS) and RNSS (Regional NSS). Although GNSS services for global users, the exactitude of provided information is dissatisfied with the degree required in modern systems such as unmanned system, autonomous navigation system for aircraft, ship and others, air-traffic control system. Especially, due to concern about the monopoly status of the countries operating it, some other countries have already considered establishing RNSS. The RNSS services for users within a specific area, however, it not only gives more precise information than those from GNSS, but also can be operated independently from the NSS of other countries. Thus, for Korean RNSS, this paper suggests the methodology to design the satellite constellation considering the regional features of Korean Peninsula. It intends to determine the orbits and the arrangement of navigation satellites for minimizing PDOP (Position dilution of precision). PGA (Parallel Genetic Algorithm) geared to solve this nonlinear optimization problem is proposed and STK (System tool kit) software is used for simulating their space flight. The PGA is composed of several GAs and iterates the process that they search the solution for a problem during the pre-specified generations, and then mutually exchange the superior solutions investigated by each GA. Numerical experiments were performed with increasing from four to seven satellites for Korean RNSS. When the RNSS was established by seven satellites, the time ratio that PDOP was measured to less than 5 (i.e. better than ‘Good’ level on the meaning of the PDOP value) was found to 94.3% and PDOP was always kept at 10 or less (i.e. better than ‘Moderate’ level).

An outrigger damper system has been proposed to reduce dynamic responses of tall buildings. In previous studies, an outrigger damper system was optimally designed to decrease a wind-induced or earthquake-induced dynamic response. When an outrigger damper system is optimally designed for wind excitation, its control performance for seismic excitation deteriorates. Therefore, a smart outrigger damper system is proposed in this study to make a control system that can simultaneously reduce both wind and seismic responses. A smart outrigger system is made up of MR (Magnetorheological) dampers. A fuzzy logic control algorithm (FLC) was used to generate command voltages sent for smart outrigger damper system and the FLC was optimized by genetic algorithm. This study shows that the smart outrigger system can provide good control performance for reduction of both wind and earthquake responses compared to the general outrigger system.

In order to obtain the goal of the weight reduction of automobile components, the researches about lighter and stronger wheel carriers have been studied without sacrificing the safety of them. In this study, the weight reduction design process of wheel carrier could be proposed based on the variation of von-Mises stress contour by substituting an AA6061 (aluminum 6061 alloy) having tensile strength of 310 MPa grade instead of FCD600 Irons. From the stress analysis results before and after design modification, the stress relaxation was done at every given loading conditions. Therefore, it could be reached that this approach method could be well established and be contributed for light-weight design guide and the optimum design conditions of the automotive wheel carrier development.

This study investigates on the tuning stainless steel(STS630) to understand for groove cutting characteristics. For this purpose, we observed the cutting force according to feed rate and cutting speed variation and performed the computational analysis due to groove cutting depth. In groove cutting of stainless steel, there were principal force, feed force and radial force by arranging the highest cutting force in order. In case of wall thicknesses of 0.3mm and 0.5mm at groove cutting, principal force increases according to the increase of feed rate but it is not related to cutting speed. We found the unstable region of cutting force that is caused to the friction resistance of cutting tool and elastic deformation of groove wall. In computational analysis, we confirmed that the more feed rate increases, the more strain increases around the tooth root.

항로표지란 해상교통의 안전을 도모하고 선박운항 능률을 향상시키기 위한 해양교통안전시설로 새로운 위험물(New Danger)은 측방표지, 방위표지, 고립장해표지 등을 이용하거나 비상침선표지(Emergency Wreck Marking Buoy)를 사용하여 적절하게 표시하여야 한다. 그러나, 침선표지의 경우 설치의 신속성, 정확성, 부표의 특성 등의 문제로 인해 실질적인 설치·운영상의 문제가 제기 되고 있으며, 선박침몰 사고의 경우 기상악화, 해역의 특성, 사고 위치의 확인이 어려워 신속한 신위험물표지(New Danger Mark) 설치가 어려운 실정이다. 이 연구는 항상 선박 상갑판에 부착된 해양안전설비 중 하나로 Maritime Buoyage System(MBS)에 근거한 자동이탈식 비상침선표지를 개발하였다. 자동이탈식 비상침선표지Auto Releasing Emergency Wreck Marking Buoy)는 총 3개의 세부기술(자동이탈, 자동릴체인, 자동구동등명기)로 구성되며, 선박 상갑판에 부착된 자동이탈식 비상침선표지가 선박의 좌초 전복 침몰 등 해양사고 발생 시 일정수압에 의해 자동으로 이탈(Auto Release) 후 자기 부상(Auto Buoyance)하여 사고 발생 지점에 신속하고 정확하게 설치된다. 이러한 자동이탈식 비상침선표지는 선박의 항해안전을 위협하는 장해물로부터 해당 해역에서의 2차 사고를 방지하고, 신속한 수색 및 구조가 이루어질 수 있도록 한다.

본 논문은 확장된 프로젝션 기법을 사용한 위상 최적설계 방법을 다루고 있다. 다양한 형상과 길이 스케일을 가지는 프로 젝션 함수를 개발해 위상 최적설계 기법에 적용시킴으로써, 복합재료의 설계에서 형상 및 크기가 미리 주어진 보강재의 최 적 배치를 위상 최적설계를 통해 결정할 수 있음을 확인하였다. 또한 이와 같은 프로젝션 기법이 균질화법과 결합되어 체적 탄성률 또는 전단탄성률 등의 유효 재료특성을 최대화시키는 단위 구조를 설계함으로써, 주기 구조를 가지는 복합재료에서 보강재의 최적 배치를 결정하고 그 유효 재료특성값을 수치적으로 계산할 수 있음을 여러 수치 예제들을 통해서 검증하였다.

본 논문은 확장된 프로젝션 기법을 사용한 위상 최적설계 방법을 다루고 있다. 다양한 형상과 길이 스케일을 가지는 프로젝션 함수를 개발해 위상 최적설계 기법에 적용시킴으로써, 복합재료의 설계에서 형상 및 크기가 미리 주어진 보강재의 최적 배치를 위상 최적설계를 통해 결정할 수 있음을 확인하였다. 또한 이와 같은 프로젝션 기법이 균질화법과 결합되어 체적탄성률 또는 전단탄성률 등의 유효 재료특성을 최대화시키는 단위 구조를 설계함으로써, 주기 구조를 가지는 복합재료에서 보강재의 최적 배치를 결정하고 그 유효 재료특성값을 수치적으로 계산할 수 있음을 여러 수치 예제들을 통해서 검증하였다.