세계적으로 곡물의 대규모 저장 중 해충방제는 주로 훈증에 의존하고 있으나, 해충의 저항성 발현, 사일로와 같은 저장시설의 분진 발생 등으로 방제효율이 감소하고 방제비용이 증가하고 있다. 본 연구는 사일로 같이 저장물(곡 물, 사료 등) 부산물과 분진이 대량 발생하는 특수한 환경의 저장시설에서 천적(기생봉)의 방사 시 저장시설 내부 환경(온도, 습도, 공기순환, 부산물, 분진, 진동과 같은 물리적 충격 등)의 영향을 최소화하여 천적의 치사율과 먹이 탐색력에 크게 영향을 주지 않으며, 천적 방사를 위한 보관, 운반 시 외부의 물리적 환경으로부터 천적을 보호 할 수 있고 1회 장착으로 천적 방사로 인한 천적의 외부 유출을 방지, 천적의 손실을 최소화 할 수 있으며, 방사량, 방사시기 및 방사간격의 조절이 용이하여 대상해충에 대한 방제효율 증가, 방사비용, 천적 손실비용 절감 등의 효과를 얻을 수 있는 효율적인 천적 방사 도구를 개발하였다.
갈색날개매미충은 최근 과수를 비롯한 다양한 식물에 대발생하여 생육을 저해하고 그을음병을 유발하는 등 문제가 매우 심각한 돌발성 해충이다. 본 연구는 위와 같은 갈색날개매미충의 친환경적인 방제를 위하여 식물추출물인 고삼추출물, 백합추출물, 목초액 등을 혼합비율을 달리하여 야외에서 성충을 대상으로 살충효과를 수행하였으며, 방제효율을 극대화하고 화학약제의 사용을 최소화하기 위하여 매미충류 등에 사용되고 있는 원제가 다른 화학약제 8종을 선발하여 살충효과를 검증하였다.
살충효과는 처리 3, 6일차 조사를 하였으며, 식물추출물의 살충력을 조사한 결과 고삼추출물, 백합추출물, 목초액 등 혼합된 제제가 83.3±5.1%의 살충력을 나타냈고 고삼추출물과 목초액이 혼합된 제제는 72.6±5.1%의 살충력을 보였다. 상용중인 화학약제의 살충효과는 Acetamiprid 92.8±5.1%, Dinotefuran 91.3±3.3%, Imidacloprid 91.3±3.3%, Etofenprox 89.9±1.9%, Deltamethrin 79.7±10.7%, Sulfoxaflor 69.6±10.0%, Bifenthrin 60.9±12.0%, Abamectin 53.6±5.1%의 살충력을 보였다. 효과가 우수한 제제에 대해서는 야외포장 포장관리용 자재로서 활용하여 방제효과를 극대화 하는데 참고로 활용하고자 한다.
This paper suggests a specific model that could efficiently improve the interaction and the interface between MES(Manufacturing Execution System) server and PDA terminal through RFID(Radio Frequency Identification) system and bar-code system in automative transmission shipment place of the finished assembly parts. The proposed model shows that the new method by RF-Tag system can more efficiently perform to reduce processing time and loading time for shipment, compared with the current approach by bar-code system. It is noted in case of the method by RF-Tag that the effects of proposed model are as follows; (a) While the shipping lead time per truck for carrying by the current method was 35 minutes, the shipping lead time by the new method was 15 minutes. (b) While the accuracy for carrying by the current method was 50%, the accuracy by the new method was 99%.
본 연구의 목적은 폐쇄형 식물생산시스템에서 세가지 혼합 LED와 형광등에서 자란 적치마 상추의 생육과 광 이용효율을 비교하는 것이다. 18일간 육묘한 적치마상추 묘를 적색(R, 655nm), 청색(B, 456nm), 녹색(G, 515nm), 백색(W, 456nm + 558nm)의 혼합 LED(R:B=8:2, R:W:B =8:1:1, R:G:B=8:1:1)와 형광등이 설치된 폐쇄형 식물생산시스템에 정식하였다. 형광등에서 자란 상추는 모든 LED 처리에 비해 유의적으로 높은 엽형지수를 보였다. 지상부와 지하부 생육에서 LED 처리간 유의적 차이를 보이지 않았으나, 모든 LED 처리가 형광등에 비해 약 34% 지상부 생체중의 증가를 유도시켰다. 한편, 정식 후 4주차에 형광등의 총 소비 전력은 145kW인 반면, LED 처리구들에서 형광등의 약 1/3배인 54kW를 나타냈다. LED 처리구들의 건물중에 대비한 광 이용 효율은 약 34mg/W였으며, 이는 형광등 보다 약 3.5배 높은 값이었다. 결론적으로, 본 연구는 식물 생산 시스템에서 적절한 조합의 LED 조사는 형광등에 비해 상추 생장을 증진시킬 수 있으며 추가적으로 에너지 절감을 통해 광 이용효율도 극대화 할 수 있음을 보여주었다.
The definition of an apartment is a building more than 5 stories high and which is the standard law. Currently, the number of apartments is increasing much faster than detached houses. Owning an apartment is a normal trend these days. However, the increasing number of apartments has been increasing the number of apartment fires which also has been making social problems. Therefore, this study was conducted for the fire extinguisher among other fire facilities because it is important for initial fire suppression. The research subject is on the fire extinguisher that is in the underground parking lot of 40 apartment complexes which are more than 10 stories. Survey and analysis were conducted for 80 fire extinguishers. There are two fire extinguishers for each apartment. The result of this study is that all installed fire extinguishers are ABC dry chemical type, 92% of them is 3.3kg and that meet the legal height(less than 1.5m). However, the condition such as appearance, inspection, manufactured year, appearance of signs, material of signs, size of signs, etc. was insufficiency. So improvement of law and system that are fire facility construction, maintenance implementation and additional designation of type approval about sign will be needed in my opinion.
With the interest on operational efficiency due to the rapid growth of food material distribution industry and food service industry, the study adopts DEA (Data Envelopment Analysis) model and examines to measure the technological, pure technical and scale efficiency those companies engaging in the food material distribution and food service business. As a result of analysis, the companies operating integrated business have relatively higher efficiency than those operating only food material distribution or food service companies while the result indicates that three efficiencies don’t have significant difference depending on whether affiliated companies or not. In the results from the measuring by DEA.
가압형 정삼투(pressure-assisted forward osmosis, PAFO) 공정은 기존의 정삼투(forward osmosis, FO) 공정의 단 점인 낮은 수투과도 및 유도용질의 역확산을 극복하여 전체 공정 효율을 향상시킨다. 하지만 가압에 의한 추가적인 수리학적 압력의 작용은 파울링을 가속화 시킨다는 단점이 있다. 본 연구는 PAFO의 간헐적 운전방법인 간헐적 가압형 정삼투 (Intermittent pressure-assisted forward osmosis, I-PAFO)의 파울링 저감 가능성을 평가하기 위해 수행되었다. 비교를 위해 FO 및 PAFO를 동시에 운전하여, 세 가지 운전에서의 파울링 거동을 관찰하였다. 파울링 실험을 위한 오염물질로 콜로이드 실리 카 입자를 사용하였고, 분리막 및 입자의 정전기적 상호작용 에너지 변화가 파울링 거동에 미치는 영향도 확인하였다. 실험 결과, I-PAFO 운전에서, 용액 pH 변화에 관계없이 가압구간, 압력완화 구간에서 각각 PAFO, FO보다 높은 수투과도를 유지 하였다. 파울링 실험 후, PAFO에 비해 I-PAFO운전에서 더 적은 수투과도 감소가 관찰되었고, 이로 인해 물리세정 후 향상된 수투과도 회복률 또한 관찰되었다.
세계 주요 항만에서 해상안전관리의 주요한 수단으로 자리잡은 VTS는 향후 E-네비게이션을 비롯하여 해상과 항만의 각종 데이터를 총괄하는 데이터 베이스의 중심이 될 것으로 전망되고 있다. 다양한 정보의 수집과 분석이라는 측면에서 최근에 주목되고 있는 빅 데이터 개념을 포함한다면 VTS를 통해 수집할 수 있는 데이터의 범위와 정보 분석 능력 및 활용범위를 향상시키기 위한 연구가 필요하다. 본 연구에서는 통신 빈도와 같이 정량적 분석 위주로 접근했던 기존 연구와는 달리 VTS 통신의 목적이나 유형과 같은 분석을 포함하여 관제대상 선박에 대한 정보와 각 통신의 소요시간까지 수집하였다. 이렇게 수집된 정보의 여러 항목을 교차하여 비교하고 분석할 수 있는 데이터 수집 모델을 본 연구에서 제시하여 관제통신 건수, 방식, 관제 유형방법, 선종별 통신량 및 법령 위반건수 등을 분석하는 것을 목적으로 한다. 이 연구 결과 (1) 부산항 북항의 경우에는 정보전달 형태의 관제가 빈번하고, 특정한 선종의 선박과 통신이 편중되어 있으며 (2) 관제 채널 청취 불이행, 항로 준수 위반의 법령 위반 사항이 자주 발생하고 있으나 통신량의 혼잡으로 인하여 소극적인 관제가 수행되고 있다는 사실을 알 수 있었다. 이렇게 수집된 정보는 IALA Guideline에서 작업부하로 지적하고 있는 ‘상황인지가 가능한 수준의 관제통신량’에 대한 분석 자료로 활용할 수 있으며 향후 e-내비게이션 연구를 위한 데이터베이스로 이용될 수 있을 것이다.
This study was conducted for recycling the waste MDF(Medium-density fibreboard) to investigate the enzymatic saccharification characteristics using two enzymes Novozyme Cellic® CTec2 and HTec2 (Novozymes, Bagsvaerd, Denmark) after the delignification by pretreatment using sodium chlorite. The chemical composition of the waste MDF are lignin, holocellulose, ash, and other extracts 28.40, 60.20, 0.10, and 11.30%, after pretreatment with sodium chlorite were 5.20, 53.10, 0.03, and 41.67%. The Lignin interferes with enzymatic saccharification of 23.2% was removed, 7.1% of holocellulose was lost. The times of sodium chlorite pretreatment and saccharification of the waste MDF was finished between 48-72 hours, the saccharification speed was fast when the concentration of the enzyme by 10% and the HTec2 CTec2 ratio 9:1. Sugar ratio of the solid content of the waste MDF is the highest as 69.6% when it comes out of 8% and a viscosity was as high as 34.8% when the 12-FB%. Therefore, the pre-treatment with sodium chlorite is more advantageous when enzymatic saccharification to lignocellulosic biomass. The amount of the enzyme, the solid-liquid ratio, and the reaction time showed a proportional relationship with saccharification efficiency. The studies for increasing the solids content of waste MDF to improve the economic efficiency more than 12% should accompanied.
Recently, in Korea various kinds of genetically modified (GM) crops have been imported and used as a raw material to manufacture foods and livestock feeds, but the different social concerns about the benefits and the potential risks of GM crops are being shown with a different reaction from the public. Thus a persistent management is required for the safe utilization of genetically modified organism (GMO). PCR analysis of transgene into crop is generally performed for the efficient post management of GMOs. The most important prerequisite for the application of nucleic acid detections is to decide the effective DNA-extraction methods. Particularly, in the case of processed feeds, the nucleic acids of which may be damaged by heating, high pressure, pH treatments, fermentation, etc. in processing, DNA must be extracted with high sensitivity from the samples to perform the PCR successfully. In this study, seven of DNA-extraction methods used commercially and non-commercially were compared with respect to the yields and quality of DNA extracted from livestock feeds and those crop materials. Amounts of genomic DNA obtained from the extraction methods varies according to feed configurations and crop materials. The DNA yield and uniformity of samples extracted with PG, CTAB, and QF method is greater than that obtained from other extraction methods. In the DNA integrity of the selected extraction methods, PCR analysis showed distinct amplifications and similar patterns in detecting crop endogenous genes and GMO genes. These results would be applicable for the selection of an adequate DNA-extraction method in extracting processed feeds and/or crop materials.
식품에서 대장균군을 효율적으로 분리하기 위해 대장균군 선택배지 5종: Chromocult Chromocult coliform agar (Merck), Hicrome coliform agar (Sigma), CHROMagar ECC, Brilliance E.coli/coliform medium (OXOID), endo agar (Merck)을 선별하여 식품 분리 대장균군 83종 및 표준균주 21종에 대해서 민감도와 특이도를 분석한 결과 Chromocult coliform agar와 HICrome coliform agar에서 94%도 민감도가 가장 높았으며, Brilliance E.coli/coliform medium는 93%, CHROMagar ECC는 92%, ENDO agar는 74%의 민감도를 나타냈다. Chromocult coliform agar와 HICrome coliform agar는 대장균군의 회수율도 높았다. 그러므로 Chromocult coliform agar와 HICrome coliform agar는 대장균군을 분리하는데 가장 효율적인 배지로 생각된다.
This paper considers the allocation and engagement scheduling problem of interceptor missiles, and the problem was formulated by using MIP (mixed integer programming) in the previous research. The objective of the model is the maximization of total intercept altitude instead of the more conventional objective such as the minimization of surviving target value. The concept of the time window was used to model the engagement situation and a continuous time is assumed for flying times of the both missiles. The MIP formulation of the problem is very complex due to the complexity of the real problem itself. Hence, the finding of an efficient optimal solution procedure seems to be difficult. In this paper, an efficient genetic algorithm is developed by improving a general genetic algorithm. The improvement is achieved by carefully analyzing the structure of the formulation. Specifically, the new algorithm includes an enhanced repair process and a crossover operation which utilizes the idea of the PSO (particle swarm optimization). Then, the algorithm is throughly tested on 50 randomly generated engagement scenarios, and its performance is compared with that of a commercial package and a more general genetic algorithm, respectively. The results indicate that the new algorithm consistently performs better than a general genetic algorithm. Also, the new algorithm generates much better results than those by the commercial package on several test cases when the execution time of the commercial package is limited to 8,000 seconds, which is about two hours and 13 minutes. Moreover, it obtains a solution within 0.13 ~33.34 seconds depending on the size of scenarios.
Recently, nanotechnology has grown as one of the leading science technology along with other converging technologies such as biology, information, medicine etc., bringing the continuous investment of the government in nano-related field. However, it is difficult to measure and evaluate the performance of the national research and development programs because of the multidimensional character of the expected outcomes. This study aims to measuring efficiency of the national nanotechnology research and development programs using DEA model. The decision making units are nine nano-related ministries including the Ministry of Science, ICT and Future Planning. The input variables are total expenditure, number of the programs and average expenditure per program. The output variables are science, technology and economic indicator, and the combination of these outputs are respectively measured as seven different DEA cases. The Ministry of Science, ICT and Future was the first efficient ministry in total technical efficiency. Ministry of Agriculture, Food and Rural Affairs and the Ministry of Food and Drug Safety were efficient in pure technical efficiency, when the Ministry of Commerce Industry and Energy took the first in the scale efficiency. The program efficiency was affected by organizational characteristics such as the institution’s scale, the concentration of the research paper or the patent, technology transfer or the commercialization. The result of this study could be utilized in development of the policy in the nanotechnology and the related field. Furthermore, it could be applied for the modification of expenditure management or the adjustment of the research and development programs’ input and output scale for each ministry.
This study applied the Stochastic Frontier Analysis to estimate which independent variable affects to efficiency of aquaculture household. This study used wage and facility scale as input variables, sales volume as an output variable to estimate efficiency. Also, the study used region, species, water quality to estimate technical inefficiency factors of the model. The data used for this study were obtained by the operating costs survey using 1:1 interview method.
The study selected translog production model with technical inefficiency term estimated as half-normal distribution. In addition, the study used pearson and spearman correlation coefficient among efficiency estimating models. Also, the study analysed differences among estimated efficiencies through t-test, and showed us 0.1793 in species, 0.4677 between Geojae and Masan.
PURPOSES: The demand for extending national highways is increasing, but traffic monitoring is hindered because of resource limitations. Hence, this study classified highway segments into 5 types to improve the efficiency of short-term traffic count planning. METHODS : The traffic volume trends of 880 highway segments were classified through R-squared and linear regression analyses; the steadiness of traffic volume trends was evaluated through coefficient of variance (COV), and the normality of the data were determined through the Shapiro-Wilk W-test. RESULTS : Of the 880 segments, 574 segments had relatively low COV and were classified as type 1 segments, and 123 and 64 segments with increasing and decreasing traffic volume trends were classified as type 2 and type 3 segments, respectively; 80 segments that failed the normality test were classified as type 4, and the remaining 39 were classified as type 5 segments. CONCLUSIONS : A theoretical basis for biennial count planning was established. Biennial count is recommended for types 1~4 because their mean absolute percentage errors (MAPEs) are approximately 10%. For type 5 (MAPE =19.26%), the conventional annual count can be continued. The results of this analysis can reduce the traffic monitoring budget.
제한되어 있는 자원으로 인해 최근 신재생에너지에 대한 관심이 고조되고 있다. 신재생에너지 중에서 도 특히 태양광 발전이 단순한 구조로 이루어져 있고, 위험성이 적어 타 재생에너지 시장보다 빠르게 성 장하고 있다. 따라서 태양광의 발전 효율을 성장시키는 많은 연구가 진행되어 왔다. 태양광 발전은 태양 광 패널의 온도나 패널 표면의 먼지, 눈 등의 오염원에 따라 발전 효율에 영향을 미치지만, 태양전지를 개 발하거나 보완하는 연구가 대부분 이루어지고 있으며 기 개발된 패널의 발전 효율을 높이는 연구는 미비 한 실정이다. 하여 본 연구는 패널 표면의 오염원을 자동으로 청소해주는 클리닝 시스템을 개발하여 적용 유무에 따른 발전 효율을 비교 분석하였다. 2016년 1월 강설 시 테스트를 수행하여 발전 효율 분석한 결 과, 5분 단위로 최대 3.3% 증가하였고, 1시간 동안 약 1% 효율이 증가하는 것으로 분석되었다. 패널 온도 는 클리닝 시스템 적용 유무에 관계없이 유사하게 나타났다. 발전 효율이 미미한 수치로 증가한 것은 적 설량이 적었기 때문인 것으로 유추된다. 향후에 많은 량의 강설 발생 시, 클리닝 시스템을 적용한다면 발 전 효율이 더 증가할 것으로 판단된다. 또한, 이러한 결과에 따라 태양광 발전 시스템 시장에서도 필요한 요소로 성장할 수 있을 것으로 기대된다.
본 연구에서는 평택 미8군 차량정비시설 내 콘크리트 포장의 줄눈부 하중전달효율(Load Transfer Efficiency, LTE)을 평가하기 위해 FWD(Falling Weight Deflectometer)를 이용한 조사・평가를 수행하 였다. 본 연구에서는 <그림 1>에서와 같이 FHWA/TX-07/0-5123-2“Guidelines for Evaluation of Existing Pavement for HMA Overlay”에서 제시한 FWD 처짐 하중전달효율 산정식을 사용하였다.
FWD를 이용한 콘크리트 슬래브 줄눈부의 하중전달효율을 조사한 결과는 <표 1>에서 보는 바와 같다. 하중전달효율이 80% 이상인 지점은 97개소로 전체의 약 84.3%에 해당한다.
콘크리트 슬래브 시공 당시 줄눈부에 <그림 2>와 같은 배부름현상(Bulging)이 발생하였다. 배부름현상 이 하중전달효율에 미치는 영향을 파악하기 위하여 총 24개 줄눈부에 대하여 순방향과 역방향으로 <그림 2>와 같이 FWD 시험을 수행하였다. <그림 3>은 각 줄눈부에서 Case 1과 Case 2의 하중전달효율을 비교 한 것이다. 그래프에서 보는 바와 같이 LTE 차이가 ±2% 이내인 경우를 (6개 지점) 제외하고 총 18개 줄 눈부 중 15개 줄눈부에서 Case 1이 Case 2보다 LTE가 큰 것으로 나타나 줄눈부 배부름현상이 LTE에 영 향을 주는 것으로 나타났다.
고분자막이 가진 수투과능 한계와 비가역적 막오염에 의한 효율 저하는 막기반 수처리공정의 추가적인 경쟁력 확보를 위해 해결해야 하는 문제이다. 본 연구에서는 초고속 물투과 특성과 뛰어난 선택성을 지닌 Graphene oxide (GO)막 에 뛰어난 항균성을 가진 은나노(nAg)가 코팅된 막을 제작, 평가하였다. GO막 은 막오염 저감에 효과적일 수 있는 높은 친수성과 음표면전하와 같은 특성과 막오염에 취약할 수 있는 높은 비표면적과 뛰어난 흡착능력과 같은 특성을 동 시에 가진다. 따라서, 논란의 부분이 있는 GO막의 막오염에 대한 저항성의 확실한 향상을 위해 nAg를 적용하였다.
이 논문은 비모수적 자료포락분석 기법을 이용하여 감귤농가의 경영효율성을 추정하였다. 추가적으로 커널밀도함수를 이용하여 경영효율성의 분포가 지난 13년간 어떻게 바뀌었는지도 도식화하였다. 연구를 위해 농촌진흥청에서 조사 발표하는 자료를 사용하였다. 분석결과를 보면, 지난 13년간 경영효율성은 시설 감귤농가와 노지 감귤농가 모두에서 상승하는 것으로 나타났다. 이것은 수입농산물이 증가하는 상 황 하에서 감귤농가의 경영효율성이 개선되고 있음을 의미한다. 경영효율성을 순수기술적 효율성과 규 모 효율성으로 분해한 결과, 순수기술적 효율성은 점차 개선되는 반면에 규모 효율성은 악화되는 것으 로 분석되었다. 하지만 여전히 효율성 개선의 여지는 순수기술적 효율성 측면에 있는 것으로 분석되었 다. 순수기술적 효율성은 꾸준히 계속 향상시키되 적정규모를 찾아가는 노력도 병행해야 할 것으로 보 인다.