In order to investigate the PM10 concentration trend and its characteristics over five different sub area in Busan from 2013 to 2015, data analysis with considering air flow distribution according to its topography was carried out using statistical methodology. The annual mean concentrations of PM10 in Busan tend to decrease from 49.6㎍/m³ in 2013 to 46.9㎍/m³ in 2015. The monthly mean concentrations value of PM10 were high during spring season, from March to May, and low during summer and fall due to frequent rain events. The concentration of PM10 was the highest in five different sub-area in Busan. High concentration episodes over 90 percentile of daily PM10 concentration were strongly associated with mean daily wind speed, and often occurred when the westerly wind or southwesterly wind were dominant. Regardless of wind direction, the highest correlation of PM10 concentrations was observed between eastern and southern regions, which were geographically close to each other, and the lowest in the western and eastern regions blocked by mountains. Wind flow along the complex terrain in Busan is also one of the predominant factors to understand the temporal variation of PM10 concentrations.

This study identified physical characteristics and aerosol particle sources of PM10 and PM2.5 in the industrial complex of Busan Metropolitan City, Korea. Samples of PM10, PM2.5 and also soil, were collected in several areas during the year of 2012 to investigate elemental composition. A URG cyclone sampler was used for collection. The samples were collected according to each experimental condition, and the analysis method of SEM-EDX was used to determine the concentration of each metallic element. The comparative analysis indicated that their mass concentration ranged from 1% to 3%. The elements in the industrial region that were above 10% were Si, Al, Fe, and Ca. Those below 5% were Na, Mg, and S. The remaining elements (1% of total mass) consisted of elements such as Ni, Co, Br and Pb. Finally, a statistical tool was applied to the elemental results to identify each source for the industrial region. From a principal components analysis (SPSS, Ver 20.0) performed to analyze the possible sources of PM10 in the industrial region, five main factors were determined. Factor 1 (Si, Al), which accounted for 15.8% of the total variance, was mostly affected by soil and dust from manufacturing facilities nearby, Factors 2 (Cu, Ni), 3 (Zn, Pb), and 4 (Mn, Fe), which also accounted for some of variance, were mainly related to iron, non-ferrous metals, and other industrial manufacturing sources. Also, five factors determined to access possible sources of PM2.5, Factor 1 (Na, S), accounted for 13.5% of the total variance and was affected by sea-salt particles and fuel incineration sources, and Factors 2 (Ti, Mn), 3 (Pb, Cl), 4 (K, Al) also explained significant proportions of the variance. Theses factors mean that the PM2.5 emission sources may be considered as sources of incineration, and metals, and non-ferrous manufacturing industries.

본 연구에서는 약콩(Glycine soja Siebold et Zucc.) 분획 추출물의 미백효능을 관찰하기 위해 B16F10 멜라노마 세포에서 TRP-1 (tyrosinase related protein-1), TRP-2 (tyrosinase related protein-2), 티로 시나제 발현을 평가하였다. 그 결과 약콩 분획 추출물 0.125, 0.25, 0.5, 2.0 mg/mL 농도에서 82% 이상의 높 은 세포생존율을 나타내었다. α-melanocyte stimulating hormone (α-MSH)을 처리한 B16F10 멜라노마 세포에 약콩의 EtOAc 분획 추출물을 처리한 결과 티로시나제 발현이 감소되었으며 TRP-1, TRP-2 단백질 발현이 감소하였다. 이러한 결과는 약콩 분획 추출물이 멜라닌생합성과 관련되는 단백질의 발현을 감소시켜 피 부 미백효능을 나타내는 것으로 기대할 수 있다.

A new Phalaenopsis cultivar SM 6310 was bred by Kyungpook National University, Korea. The new cultivar SM 6310, showing the phenotype of yellow colored mini type characteristics, was introduced by artificial crossing of Phalaenopsis ‘Brother Gold Miss’ and Phalaenopsis philippinensis. An elite individual number ‘03-06-31’ later named as ‘SM 6310’ was selected among 250 individual progenies for more than 2 years(2004-2005) intensive selection process covering excellent vegetative and flowering characteristics. In year 2006-2007, the 1st and 2nd characteristic analysis were performed through stability and uniformity test. The ‘SM 6310’ shows that flower color is bright clean yellow (RHS#:12B) and flower shape is small type with size of 5.8 and 6.1cm in flower length and width, respectively. ‘SM 6310’ is regarded as raceme flower type suitable small flower pot market. The leaf of ‘SM 6310’ is rowing horizontally and about 15.6cm in length and 7.1cm in width. This cultivar also possesses no genetic variation, fast invitro propagation and easy growing due to vigorous growth habit. This ‘SM 6310’ is registered (Reg.#:3825) to Korea Seed & Variety Service (KSVS) in 21 December, 2011 and PBR (plant breeder's right) is currently controlled by Sangmiwon Orchid Company, Korea.

Genetically modified (GM) crops have been developed worldwide through the recombinant DNA technology and commercialized by global agricultural companies. Until now, GM crops have not been cultivated commercially in Korea. Commercialization of GM crops requires a compulsory assessment of environmental risk associated with the release of GM crops. This study was conducted to evaluate the frequency of pollen mediated gene flow from Bt transgenic rice (Agb0101) to japonica non-GM rice (Nakdongbyeo), indica non-GM rice (IR36), and weedy rice (R55). A total of 729,917, 596,318 and 230,635 seeds were collected from Nakdongbyeo, IR36, and R55, respectively, which were planted around Agb0101. Selection of the hybrids was determined by repeated spraying of herbicide and Cry1Ac1 immunostrip assay. Finally, the hybrids were confirmed by PCR analysis using specific primer. The hybrids were found in all non-GM rice and out-crossing ranged from 0.0005% at IR36 to 0.0027% at Nakdongbyeo. All of hybrids were located within 1.2 m distance from the Agb0101 rice plot. The meteorological elements including rainfall and temperature during rice flowering time were found to be important factors to determine rice out-crossing rate. Consideration should be taken for many factors like the meteorological elements of field and physiological condition of crop to set up the safety management guideline to prevention of GM crops gene flow.

As a result of evaluating the spalling properties using a restrained ring-type concrete specimen, in the case of rapid heating, the water vapor pressure rapidly rise and the surface spalling is repeated. In the case of low-speed heating, The water vapor pressure accumulated in the concrete exceeded the limit, and explosive spalling occurred inside.

This study was conducted to determine correlations and similarity between the ozone and PM10 data of 19 air quality monitoring stations in Busan from 2013 to 2016, using correlation and cluster analyses. Ozone concentrations ranged from 0.0278±0.0148 ppm at Gwangbok to 0.0378±0.017 ppm at Taejongdae and were high in suburban areas, such as Yongsuri and Gijang, as well as in coastal areas, such as Jaw, Gwangan, Taejongdae and Noksan. PM10 concentrations ranged from 37.2±25.0 ug/m3 at Gijang to 58.3±32.2 ug/m3 at and Jangrim. PM10 concentrations were high in the west, exceeding the annual ambient air quality standard of 50 ug/m3. Positive correlations were observed for ozone at most stations, ranging from 0.61 between Taejongdae and Sujeong to 0.92 between Bugok and Myeongjang. The correlation coefficients of PM10 between stations ranged from 0.62 between Jangrim and Jaw to 0.9 between Gwangbok and Sujeong. Yeonsan, Daeyeon, and Myeongjang were highly correlated with other stations, so they needed to be reviewed for redundancy. Ozone monitoring stations were initially divided into two sections, north-western areas and suburban-coastal areas. The suburban-coastal areas were subsequently divided into three sections. PM10 monitoring stations were initially divided into western and remaining areas, and then the remaining areas were subsequently divided into three sections.

We retrieved rotational temperatures from emission lines of the OH airglow (8-3) band in the sky spectra of the Sloan digital sky survey (SDSS) for the period 2000-2014, as part of the astronomical observation project conducted at the Apache Point observatory (32°N, 105°W). The SDSS temperatures show a typical seasonal variation of mesospheric temperature: low in summer and high in winter. We find that the temperatures respond to solar activity by as much as 1.2 K ±0.8 K per 100 solar flux units, which is consistent with other studies in mid-latitude regions. After the seasonal variation and solar response were subtracted, the SDSS temperature is fairly constant over the 15 year period, unlike cooling trends suggested by some studies. This temperature analysis using SDSS spectra is a unique contribution to the global monitoring of climate change because the SDSS project was established for astronomical purposes and is independent from climate studies. The SDSS temperatures are also compared with mesospheric temperatures measured by the microwave limb sounder (MLS) instrument on board the Aura satellite and the differences are discussed.

The CALEB10 is a multi-legged biomimetic underwater robot. In the last research, we developed a swimming pattern named ESPG (Extended Swimming Pattern Generator) by observing diving beetle’s swimming actions and experimented with a positive buoyancy state in which CALEB10 floats on the water. In this paper, however, we have experimented with CALEB10 in a neutral buoyancy state where it is completely immersed in water for pitch motion control experiment. And we found that CALEB10 was unstably swimming in the pitch direction in the neutral buoyancy state and analyzed that the reason was due to the weight proportion of the legs. In this paper, we propose a pitch motion control method to mimic the pitch motion of diving beetles and to solve the problem of CALEB10 unstably swimming in the pitch direction. To control the pitch motion, we use the method of controlling additional joints while swimming with the ESPG. The method of obtaining propulsive force by the motion of the leg has a problem of giving propulsive force in the reverse direction when swimming in the surge direction, but this new control method has an advantage that a propulsive moment generated by a swimming action only on a target pitch value. To demonstrate validity this new control method, we designed a dynamics-based simulator environment. And the control performance to the target pitch value was verified through simulation and underwater experiments.

This study was conducted to investigate how PM10 concentration and Relative Humidity (RH) affected visibility in Jinju, Korea. A 9-yr dataset of 1 h averages for visibility, PM10, and RH data was analyzed to examine the correlation between these variables. On average, visibility decreased by 1.4 km for every 10 μg/㎥ increase in PM10 and by 2.1 km for every 10% increase in RH. In general, a negative correlation was observed between visibility and and PM10 concentration. However, under conditions of low PM10 concentration(< 15 μg/㎥) and visibility(< 2 km), there was a positive correlation between these two variables. In this case, RH levels were high (> 75%). A high correlation analysis between two variables need to be under control conditions with RH < 75%, PM10 15~100 μg/㎥, and visibility > 2 km.

The F2-layer critical frequency (foF2) data from several ionosondes are employed to study the long-distance effect of the M8.8 Chile Earthquake of February 27, 2010, on the F2 layer. Significant perturbations of the peak F2-layer electron density have been observed following the earthquake at two South African stations, Hermanus and Madimbo, which are located at great circle distances of ~8,000 and ~10,000 km from the earthquake epicenter, respectively. Simplified estimates demonstrate that the observed ionospheric perturbations can be caused by a long-period acoustic gravity wave produced in the F-region by the earthquake.

To determine the effect of air pollution reduction policies, the long-term trend of air pollutants should be analyzed. Kolmogorov-Zurbenko (KZ) filter is a low-pass filter, produced through repeated iterations of a moving average to separate each variable into its temporal components. The moving average for a KZ(m, p) filter is calculated by a filter with window length m and p iterations. The output of the first pass subsequently becomes the input for the next pass. Adjusting the window length and the number of iterations makes it possible to control the filtering of different scales of motion. To break down the daily mean PM10 into individual time components, we assume that the original time series comprises of a long-term trend, seasonal variation, and a short-term component. The short-term component is attributable to weather and short-term fluctuations in precursor emissions, while the seasonal component is a result of changes in the solar angle. The long-term trend results from changes in overall emissions, pollutant transport, climate, policy and/or economics. The long-term trend of the daily mean PM10 decreased sharply from 59.6 ug/m3 in 2002 to 44.6 ug/m3 in 2015. This suggests that there was a long-term downward trend since 2005. The difference between the unadjusted and meteorologically adjusted long-term PM10 is small. Therefore, we can conclude that PM10 is unaffected by the meteorological variables (total insolation, daily mean temperature, daily mean relative humidity, daily mean wind speed, and daily mean local atmospheric pressure) in Busan.

The classification of airflow patterns during high ozone (O3) and PM10 episodes on Jeju Island in recent years (2009-2015), as well as their correlation with meteorological conditions according to classified airflow patterns were investigated in this study. The airflow patterns for O3 and PM10 were classified into four types (Types A-D) and three types (Types E-G), respectively, using the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and synoptic weather charts. Type A was the most dominant airflow pattern for O3 episodes, being characterized by the transport of airflows from urban and industrial areas in China with the highest frequency (about 69%, with a mean of 67 ppb). With regard to the PM10 episodes, Type E was the most dominant airflow pattern, and was mostly associated with long distance transport from Asian dust source regions along northwesterly winds, having the highest frequency (about 92%, with a mean of 136 μg/m3). The variations in the concentration of O3 and PM10 during the study period were clarified in correlation with two pollutant and meteorological variables; for example, the high (low) O3 and PM10 concentrations with high (low) air temperature and/or wind speed and vice versa for precipitation. The contribution of long-range transport to the observed PM10 levels in urban sites for different airflow patterns (Types E-F), if estimated in comparison to the data from the Gosan background site, was found to account for approximately 87-93% (on average) of its input. The overall results of the present study suggest that the variations in O3 and PM10 concentrations on Jeju Island are mainly influenced by the transport effect, as well as the contribution of local emissions.

Asthma deaths in Seoul peaked on the third, fifth, and second days after the PM concentration exceeded the daily average concentration standard. We classified the synoptic meteorological conditions, based on the days involving such cases, into three categories. Type 1 included the meteorological condition likely to cause high air pollution concentrations in the leeward region, the dominant wind direction of which is the northwest. Type 2 included the meteorological condition likely to cause high air pollution concentrations due to the weak wind velocity under stable atmospheric conditions. Type 3 was when the passage low atmospheric pressure and the expansion of high atmospheric pressure occurred at the rear, indicating a meteorological condition likely to cause high air pollution, in certain regions. Type 1 occurred 11 times, with high concentrations of over 100㎍/m³ being observed in the southeastern part of Seoul. Type 2 occurred 24 times, often accompanied by a PM concentration of 100~400 ㎍/m³. Type 3 occurred 11 times, and was accompanied by several days of yellow dust that accounted for the highest concentrations.

《바이올린 솔로를 위한 소나타와 파르티타》 BWV 1001-1006의 소나타들에 위치하는 푸 가들이 작품집에서 점하는 의미에 대해, 바이올린에 의해 실현되는 바흐 푸가의 새로운 면면 들에 대해 탐구하는 본 논문은 다음의 결론에 이른다. 바흐는 바이올린 솔로로 푸가의 새로 운 패러다임을 구축했다. 거기에서는 대위법적 전개뿐 아니라 바이올린 특유의 기교적, 수식 음형적 패시지들까지 아우러지며, 이로써 그 엄격한 양식과 자유로운 양식의 결합이 작품집 을 가로지르는 의미를 띤다. 또한 바흐의 바이올린 푸가들은 다양성과 유동성의 형식 및 구 성으로 특징지어지는데, 그것은 푸가의 기본 질서에도 침투되어 있다. 다양성과 유동성에 정 교하게 조성되는 통일성과 완결성이 더해진다. 이 특성들은 개별 푸가에서, 세 푸가 사이에 서 함께 나타나고, 이러한 관점에서 푸가들은 BWV 1001-1006의 ‘커다란 코스모스’를 함축하 는, 대위법적 연주의 차원을 개척한 ‘작은 코스모스’로 이해될 수 있다.

Jungmo1019 early maturing rice variety was developed by the rice breeding team of the Department of Southern Crop, NICS, RDA in 2011. This cultivar was derived from the cross Hwayeongbyeo//Hitomebore/Nampyeongbyeo made in 2005 and the production of doubled haploid rice plant from anther culture in F1 generation. Testing in the replicated yield trial in 2008, a promising line YR25312Acp62 was selected and it was designated as the Milyang246. The early traus plauting local adaptability test of Milyang246 was carried out at three location in 2011 and it was named as Jungmo1019 showing a high head rice ratio and early–maturity eco-type. Number of spikelet/panicle and 1,000 grain weight of brown rice was slightly lower than those of Jopyeongbyeo. This variety is resistant to bacterial blight, rice stripe virus disease but susceptible to major insect and pests. The milled rice yield of Jungmo1019 is 4.52MT per ha at the early transplanting of the local adaptability test. This line should serve as a useful source for improving head rice ratio at early transplanting cultivation in southern plain area.

‘Jungmo1038', a mid-late maturing, high dry matter yielding rice (Oryza sativa L.) cultivar with glabrous leaf and hull, was developed for whole crop silage (WCS) use. It was derived from a cross between ‘SR24592-HB2319’ with high biomass, smooth leaf and hull and good germinability in low temperature and new plant type (NPT), ‘IR73165-B-6-1-1‘ which had low tillering trait, large panicle, dark green leaf, thick and sturdy stem and vigorous root system. This cultivar had about 125 days growth period from seeding to heading, 99㎝ culm length, 20㎝ panicle length, 13 panicles per hill, 119 spikelets per panicle and 1,000-grain weight of 23.3 g as brown rice in central plain region, Suwon. This hairless WCS rice variety was weak to cold stresses similar to ‘Nokyang’ but was resistant to lodging in the field, strong to viviparous germination and good to low temperature germination. In addition, ‘Jungmo1038’ was resistant to leaf and neck blast but susceptible to bacterial blight, rice stripe virus and brown planthopper. Its average dry matter yield for three years reached 17.2 MT/ha, 21% higher than that of ‘Nokyang’. This glabrous cultivar had 6.6% crude protein and 62.4% total digestible nutrients a little low compared to ‘Nokyang’. In Korea peninsular, 'Jungmo1038' grows well in central and southern plain and is good to harvest between 15 to 30 days after heading to improve its feeding value and digestion rate of livestock(Grant No. 5634).

This study analyzes the PM10 characteristics (particulate matter with aerodynamic diameter less than 10 ㎛), concentration, and emissions in eight large South Korean cities (Seoul, Incheon, Daejeon, Daegu, Gwangju, Ulsan, Busan, Jeju). The annual median of PM10 concentration showed a decline of 0.02~1.97 ㎍/㎥ in the regions, except for Incheon, which recorded an annual 0.02 ㎍/㎥ increase. The monthly distribution levels were high in spring, winter, fall, and the summer, but were lower in summer for all regions except for Ulsan. These differences are thought to be due to the dust in spring and the cleaning effect of precipitation in summer. The variation in concentrations during the day (diurnal variation) showed that PM10 levels were very high during the rush hour and that this was most extreme in the cities (10.00 and 18.00-21.00). The total annual PM10 emissions analysis suggested that there had been a general decrease, except for Jeju. On-road mobile (OM) sources, which contributed a large proportion of the particulates in most regions, decreased, but fugitive dust (FD) sources increased in the remaining regions, except for Daegu. The correlation analysis between PM10 concentrations and emissions showed that FD could be used as a valid, positive predictor of PM10 emissions in Seoul (74.5% (p<0.05)), Dajeon (47.2% (p<0.05)), and Busan (59.1% (p<0.01)). Furthermore, industrial combustion (IC) was also a significant predictor in Incheon (61.7% (p<0.01)), and on-road mobile (OC) sources were a valid predictor in Daegu (24.8% (p<0.05)).

In this study, antioxidant activities and physicochemical properties of chocolate fermented with Lactobacillus plantarum CK10 were investigated. The pH level decreased from 5.26±0.02 to 3.98±0.06 during fermentation while titratable acidity increased from 5.36±0.19 to 13.31±0.34. The total polyphenol and flavonoid contents slightly increased during fermentation, but it was numerically negligible. Slight increase and decrease in the radical scavenging activities of chocolate, against DPPH-, ABTS-, and alkyl- radical, were observed during 32 hr of fermentation, but the changes were not statistically relevant. Composition ratios (% area by GC analysis) of lactic acid, xanthosine, and theobromine increased with fermentation time while hydroxymethylfurfural (HMF) and caffeine decreased after 32 hr of fermentation, in the order of xanthine (22.7%), theobrome (20.0%), lactic acid (14.9%), HMF (9.1%) and caffeine (9.0%). However, there was no remarkable changes in theobromine and caffeine contents in chocolate during fermentation.