영상처리는 정확한 오이의 형상 및 위치를 인식하기 위하여 형상인식 알고리즘에 대한 연구를 수행하였다. 다양한 오이형상을 인식하기 위한 방법으로는 신경회로망의 연상 메모리 알고리즘을 이용하여 오이의 특정형상을 인식하였다. 형상인식은 실제영상에서 오이의 형상과 위치를 판정할 수 있도록 알고리즘을 개발한 결과, 다음과 같은 결론을 얻었다. 본 알고리즘에서는 일정한 학습패턴의 수를 2개, 3개, 4개를 각각 기억시켜 샘플패턴 20개를 실험하여 연상시킨 결과, 학습패턴으로 복원된 출력패턴의 비율은 각각 65.0%, 45.0%, 12.5%로 나타났다. 이는 학습패턴의 수가 많을수록 수렴할 때, 다른 출력패턴으로 많이 검출되었다. 오이의 특정형상 검출은 30×30간격으로 자동검출 되도록 처리하였다. 실제영상에서 자동 검출로 처리한 결과, 오이인식의 처리시간은 약 0.5~1초/1개(패턴) 빠르게 검출되었다. 또한, 다섯 개의 실제 영상에서 실험한 결과, 학습패턴에 대한 다른 출력패턴은 96~99%의 제거율을 나타내었다. 오이로 인식된 출력패턴 중에서, 오검출된 출력패턴의 비율은 0.1~4.2%를 나타내었다. 본 연구에서는 신경회로망을 이용하여 오이의 형상 및 위치를 인식할 수 있도록 알고리즘을 개발하였다. 오이의 위치측정은 실제영상에서 학습패턴과 유사한 출력패턴의 좌표를 가지고, 오이의 위치좌표를 추정할 수 있었다.
Study of the main properties of PVDF films produced by two processing technologies such as hot pressing from a melt or solution casting was the aim of this paper. All samples were prepared of as-received PVDF powder. First group of samples was prepared by the hot pressing. Second group of samples was prepared by the solution casting method. PVDF powder was dissolved in dimethylformamide. To characterize properties of samples, different experimental methods such as FRA (dielectric spectroscopy), IR-spectroscopy and DSC/TGA analysis were used in this work. It was found that IR-spectra of both studied groups do not change compared to that for virgin PVDF powder. It confirms that molecular structure is practically independent on the processing technology of samples. The only difference has been found that new band centered at appears for samples prepared by the hot pressing method. This absorption band is related with formation of C=C bonds in samples prepared by the hot pressing method in contrast both to PVDF powder and samples prepared by the solution casting method.
UV-C와 -B type의 lamp를 이용한 혼합 자외선(UV)조사의 조사시간, 조사온도 및 광 촉매제인 H2O2의분사농도변화를 이용하여 감귤껍질에 부착되어있는 농약을 제거하기 위한 공정의 최적화를 이루고자 하였다. Chloropyrifos에 대한 독립변수들의 영향력은 조사온도가 가장 컸으며 그 다음 조사시간, H2O2 분사농도 순 이었다. Methidathion은 조사시간이 가장 컸으며 조사온도, H2O2 분사농도 순으로 나타났다. EPN은 조사온도와 조사시간이 비슷하게 나타났고 H2O2 분사농도가 가장 작았다. UV감귤껍질의 농약 잔존량이 가장 작게 나타난 처리조건으로 chloropyrifos와 EPN에 대한 최적조건으로는 조사시간 60분, 조사온도 45oC, H2O2 분사농도 1000 ppm으로 나타났다. 반면에 methidathion의 경우에는 최적조건으로는 조사시간 60분, 조사온도 40oC, H2O2 분사농도 1000 ppm으로 나타났다. 최적공정조건에서 chloropyrifos, methidathion 및 EPN의 잔존 량은 조사 전의 각각 46, 49 및 28% 수준이었다.
밤가루를 밀가루에 0%, 10%, 20%, 30% 대체한 복합분에 대하여 반죽의 물리적 특성 및 제빵 특성을 검토하고 밤가루 첨가가 빵의 기호도에 미치는 영향에 대해 조사하였다. 반죽의 물리적 특성 중 farinogram 측정 결과 밤가루의 첨가량이 증가함에 따라 반죽시간은 짧아졌으나 반죽의 안정도와 내구성이 약화되었다. Amylogram에서 호화온도는 대조군에 비해 다소 증가하는 경향을 보인반면 최고점도는 감소하였다. 반죽팽창도 측정결과 밤가루가 20%이상 첨가된 반죽은 변화가 없었으며, 제빵 후 빵의 부피가 작고 비용적도 낮았다. 밤가루 첨가에 따른 식빵의 품질평가결과 밤가루를 10% 첨가하여 제조한 식빵이 20%, 30% 첨가한 식빵에 비해 경도가 낮았으며, 내상 또한 비교적 작고 균일하였다. 밤가루 첨가시 10%이내가 좋을 것으로 사료된다.
This study was conducted to evaluate the microbial contamination levels in the processing company of Nuroong-ji. Microbial contamination levels were examined for sanitary indication bacteria such as aerobic plate count, coliforms and fungi, and pathogenic bacteria such as Escherchia coli O157:H7, Salmonella spp., Staphylococcus aureus, and Listeria monocytogenes. Contamination levels were detected differently according to handling materials and purposing work-space. The equipments and raw materials were not seriously contaminated but there were necessary to attend the cross-contamination. A high contamination level was detected at the process where the interference of the employees was relatively higher than the other process. Standardization of the roasting process (120~170℃, about 10 min) could be necessary to control the microbial organism effectively on Nuroong-ji manufacturing process. At small/medium size foodstuff manufacturers, it is the most important to improve the recognition level of individual hygiene but also expand a hygiene facility.
21세기에 들어와 국내에 초고속 인터넷의 보급으로 현재 초고속 인터넷 보급률이 전 세계에서 최 상위권에 진입해 있는 상황에서, 과거 전화 접속 네트워크로 인터넷을 사용하던 때 보다 웹 사이트 및 웹 서비스가 활발해지고 있으며, 그에 따른 다양한 서비스들이 지원되고 있다. 과거 PC에서 구동되던 응용 프로그램 군들의 설치가 따로 필요 없이 웹 브라우저를 이용하여 다양한 응용프로그램들이 수행되고 있다. 본 연구는 이러한 현상을 반영하여 다양한 웹 브라우저 환경에서 영상처리를 쉽게 접근하고 사용할 수 있는 영상처리 애플리케이션을 개발하는 것에 중점을 두었다.
◉ 목적: 본 연구의 목적은 요리활동의 적용이 감각방어 아동의 감각처리능력 및 문제행동에 미치는 영향을 알아보기 위한 것이다.
◉ 연구방법: 감각력 평가(Sensory profile ; SP) 검사를 통하여 감각처리에 문제를 가진 3명의 아동을 대상으로 부모의 동의를 얻어 12주 동안 각 아동마다 10회에 걸친 요리치료를 실시하였다. 아동마다 연구자 1명씩 개입하여 약 30분~60분씩 요리활동을 하였고, 치료 전후 평가는 감각력 평가(Sensory profile ; SP)와 문제행동체크리스트(Child Behavior Checklist ; CBCL)를 사용하였다.
◉ 결과: 각 아동마다 감각력 평가(Sensory profile ; SP)와 문제행동체크리스트(Child Be havior Checklist ; CBCL)평가 결과, 3명의 아동 모두 긍정적 효과를 보였다. A아동은 감각력 평가(Sensory profile ; SP) 검사결과 총점 235점에서 263점으로 점수가 변화하였고, 문제행동체크리스트(Child Behavior Checklist ; CBCL) 평가 결과 총점 127점에서 106점으로 감소하였다. B아동은 감각력 평가(Sensory profile ; SP) 검사결과 총점 298점에서 308점으로 증가하였고, 문제행동체크리스트(Child Behavior Checklist ; CBCL) 평가 결과 총점 107점에서 103점으로 점수가 변화하였다. C아동은 감각력 평가(Sensory profile ; SP) 검사결과 총점 287점에서 302점으로 점수가 변화하였고, 문제행동체크리스트(Child Behavior Checklist ; CBCL)평가 결과 총점 110점에서 96점으로 점수가 감소하였다.
◉ 결론: 감각방어를 가진 아동에게 요리활동을 적용하였을 때, 감각처리능력을 향상시키고, 문제행동을 감소시키는 효과가 나타났다. 이러한 결과를 기초로 대상자의수를 늘리고 장기간에 걸쳐 아동의 변화를 확인할 수 있는 요리활동 연구가 지속적으로 필요하다고 사료된다.
Graphene is one of the most promising materials for many applications. It can be used in a variety of applications not only as a reinforcement material for polymer to obtain a combination of desirable mechanical, electrical, thermal, and barrier properties in the resulting nanocomposite but also as a component in energy storage, fuel cells, solar cells, sensors, and batteries. Recent research at Michigan State University has shown that it is possible to exfoliate natural graphite into graphite nanoplatelets composed entirely of stacks of graphene. The size of the platelets can be controlled from less than 10 nm in thickness and diameters of any size from sub-micron to 15 microns or greater. In this study we have investigated the influence of melt compounding processing on the physical properties of a polyamide 6 (PA6) nanocomposite reinforced with exfoliated graphite nanoplatelets (xGnP). The morphology, electrical conductivity, and mechanical properties of xGnP-PA6 nanocomposite were characterized with electrical microscopy, X-ray diffraction, AC impedance, and mechanical properties. It was found that counter rotation (CNR) twins crew processed xGnP/PA6 nanocomposite had similar mechanical properties with co-rotation (CoR) twin screw processed or with CoR conducted with a screw design modified for nanoparticles (MCoR). Microscopy showed that the CNR processed nanocomposite had better xGnP dispersion than the (CoR) twin screw processed and modified screw (MCoR) processed ones. It was also found that the CNR processed nanocomposite at a given xGnP content showed the lowest graphite X-ray diffraction peak at 26.5˚ indicating better xGnP dispersion in the nanocomposite. In addition, it was also found that the electrical conductivity of the CNR processed 12 wt.% xGnP-PA6 nanocomposite is more than ten times higher than the CoR and MCoR processed ones. These results indicate that better dispersion of an xGnP-PA6 nanocomposite is attainable in CNR twins crew processing than conventional CoR processing.
This study was conducted to investigate optimum processing procedure of fresh-cut button mushrooms. The experiments were done with different processing parameters including washing method, washing time, sanitation, and cutting time. Fresh mushrooms were washed by swirling water (SW), lift type-immersion washing (LIW), or combined LIW and water spray (LI+WS). Mushroom samples were washed by LIW for 0, 1, 3, and 5 minutes separately. Mushrooms were sanitized with 0, 50, or 100 ㎕L-1 chlorine solution (pH 7) for 60 seconds. Mushrooms were sliced at different times (before washing, after washing, or after drying). The combined washing treatment, LIW+WS was effective in maintaining better appearance and higher Lightness color value among treatments. Optimum washing time to remove foreign materials and maintain color was 3 minutes when mushrooms were washed by LIW. Samples sanitized with 50 ㎕L-1 chlorine reduced initial aerobic bacterial population and had only slight residual chlorine odor. Fresh-cut mushrooms sliced after washing had the lowest loss among samples. The optimized washing, sanitation, and cutting time parameters can be used for sequential processing of fresh-cut button mushrooms.
수집 농산물의 세척, 선별, 포장 작업 등이 이루어지는 APC 작업장은 하절기에 작업자들이 고온의 환경에 노출되므로 작업환경 개선을 위한 냉방공조가 요구되고 있다. 기존의 전체 냉방 공조방식은 과도한 유지비로 인한 운용상의 어려움이 발생하고 있으므로 설비비 및 운용비가 상대적으로 저렴한 시스템을 적용할 필요가 있다. 본 연구에서는 하절기 APC 작업공간의 효율적 냉방을 위한 냉방시스템 설계의 기초 연구로써 CFD를 기반으로 하여 양압식 및 음압식 팬 앤 패드 시스템과 국소냉방 시스템에 대해 열유동 수치해석을 수행하여 각각의 냉방효과를 예측하였다. 그 결과, 음압식 팬 앤 패드 시스템은 고온 외기의 과도한 유업으로 인해 패드 하류의 일부 영역을 제외한 대부분의 작업영역에서 상대적으로 고온의 온도 분포를 보였으며 기류의 유속분포 역시 낮게 나타나 APC 냉방시스템으로 부적합한 것으로 판단되었다. 양압식 팬 앤 패드 시스템은 직업장의 중심부 및 각 작업영역에 비교적 균일한 저온환경을 조성하나 작업자 위치별로 기류의 유속편차가 크게 나타났다. 국소냉방 시스템의 경우 각 작업자 위치의 상부에서 냉기류가 공급되는 방식이므로 팬 앤 패드 시스템에 비해 작업자 위치에서의 온도분포와 기류 유속분포가 상대적으로 균일하게 나타났다. 양압식 팬 앤 패드 시스템은 냉방기를 사용하는 기존의 공조방식에 비해 설비비 및 유지비가 저렴하나, 실제 APC 작업장의 냉방공조에 적용시에는 팬 소음, 고습환경이 선별기 등 장비에 미치는 영향, 용수공급 및 패드교체 등을 고려하여 보다 신중한 검토가 요구된다.
Currently, nanotechnology is widely applied in various industrial fields and is rapidly emerging as a promising future technology. In food industries, nanotechnology is used to enhance food quality and safety. Numerous cutting-edge studies on the advantages of nanotechnology have been conducted in the fields of food processing, food ingredients and additives, food packaging, and food engineering for optimal health. The market for these areas of research has grown steadily, and is expected to continue to do so. Because of this, R&D for nanotechnology that can be used effectively in food industries is being performed by several companies, as well as in academic research institutions around the world. This review describes the recent global R&D trends that have been in progress for two key areas: food processing and food packaging.
목적 : 발달장애아동의 질환별 감각처리능력을 파악하여 감각통합치료에 방향성을 제시 하고, 작업치료 전략을 수립하는데 기초자료를 제공하고자 하였다. 연구방법 : 발달장애아동의 질환별 감각처리능력을 파악하기 위하여 임윤정 등(2007)이 한국어로 번역한 Sensory Profile을 사용 하였다. 연구대상은 발달장애아동으로 진단받은 아동을 양육하고 있는 보호자에게 설문조사에 대한 동의를 얻어 2009년 3월부터 2010년 2월까지 방문 및 우편 배부를 하여, 총 325명의 자료가 분석에 사용되었다. 자료 분석은 일반적 특성과 감각처리능력의 감각영역 14항목과 감각요인 9항목은 빈도 분석하였으며, 감각통합처리기술을 비교하기 위하여 일요인 분산분석을 실시하였다. 그리고 사후검정은 Scheffe 검정을 하였다. 연구결과 : 감각영역에서 G영역(지구력/근긴장도 조절)이 네 집단(ADHD아동, 자폐아동, 정신지체아동, 발달지연 아동)에서 모두 문제범주로 나타났다. 발달장애아동의 질환별 감각요인 비교에서 요인1(감각추구)과 요인2(정서반응)가 통계학적으로 유의한 차이를 보였다(p<.01). 결론 : 발달장애아동은 역치와 행동의 관계를 설명하는 4개의 감각모델(감각등록저하, 감각민감성, 감각회피, 감각 찾기) 중 감각등록저하에 공통적인 문제점을 갖는 것을 확인할 수 있었다. 앞으로는 정상아동과의 연구를 통해서 발달장애아동과의 차이를 판별할 수 있는 기준을 결정할 수 있는 후속연구가 필요하리라 사료된다.
In the present work, water-based gold nanofluids were synthesized by the solution plasma processing (SPP). The size distribution and the shape of gold nanoparticles in the nanofluids were investigated using high resolution transmission electron microscopy (HR-TEM). The dispersion stability of gold nanofluids was characterized using zeta potential, as well. The thermal properties of gold nanofluids were measured by utilizing lambda measurement device. Nanofluids containing nanoparticles with in diameter were successfully synthesized. As diameter of nanoparticles decreased, dispersion stability of nanofluids increased and the enhanced ratio of thermal conductivity increased. The nanofluid with nanoparticles of in diameter showed approximately 3% improvement in thermal conductivity measurement and this could be due to the enhanced Brownian movement.
연구는 음식물 쓰레기를 음식물 소멸기에서 미생물에 의해 발효하여 유기물을 감량화하고, 음식물 발효시 발생되는 가스를 냉각기에서 기체와 수분으로 분리하여 기체는 반응기로 다시 보내고 수분은 응축하여 침지식 MF 중공사 분리막이 장착된 MBR 시스템에 적용하여 처리하는 시스템에 관한 연구이다. (주)바이오하이테크에서 제작한 음식물 소멸기와 수처리 장치에 침지식 MF 중공사 모듈을 설치하여 90일간 H연구소 직원식당에서 발생되는 음식물 쓰레기를 연속 투입하여 처리하였다. 음식물 소멸기 초기 Seeding를 위하여 수분조절제로 미강, 왕겨, 톱밥을 305 kg 투입하였고 음식물은 운전기간동안 1,648 kg투입하였고 응축폐수는 1,600 L 발생되었다. 음식물 소멸기 운전 종료 후 배출된 발효 부산물은 386 kg으로 감량율은 약 80%로 조사되었다. 침지식 MF 중공사 분리막 모듈을 응축폐수의 MBR 시스템에 적용하여 유기물 처리한 결과 제거율은 각각 BOD 99.9%, COD 97.5%, SS 98.6%, T-N 54.6%, T-P 34.7%였으며, 총대장균은 100%가 제거되었다.
Door to door service is a typical method for individual parcel deliveries. In the current delivery information system, a delivery person manually inputs the information of many delivery results, which causes inefficiency and difficulties of tracking deliveries. This study suggests an enhanced delivery information system which has the following two characteristics. Firstly, a tagged RFID(Radio Frequency Identification) transmits the delivery result information to the main server by just collecting RFID at a place of destination. Secondly, with the characteristics of rewritable method, the collected RFID is to be input new information and tagged to other parcels.
A fiber fraction (Aloe cellulose), the by-product obtained from Aloe vera gel processing was freeze dried and investigated for in vitro glucose/ bile acid retarding effects of powdered sample (100 mesh) comparing with commercial α-cellulose as a reference sample. We also examined the effectiveness of physiological functionality such as the antiobesity and anti-constipation on Sprague-Dawley (SD) rat. The Aloe cellulose powders during in vitro dialysis experiment for 2 hours exhibited the glucose and bile acid retarding index of 20.32-35.2% and 53.13-28.30%, respectively. Especially, freeze dried aloe cellulose showed the 2.5 and 1.2-6 times higher effect on in vitro glucose and bile acid retardation than those of α-cellulose. These relatively good retarding effects on glucose and bile acid diffusion suggest a potential of preventing from diabetes and arteriosclerosis of some extent. Also, the results from animal experiments on SD rats fed a high-fat diet for 4 weeks suggested that Aloe cellulose might be used as a novel dietary fiber showing an effective anti-obesity and anti-constipation effect.