본 연구에서는 혼합 자일렌에서 에틸벤젠을 분리하기 위하여 제올라이트 분리막을 이용하였다. 마이크로웨이브 합성 온도에 변화를 주어 제조한 TS-1 제올라이트 결정을 알루미나 튜브에 성장시키기 위해 3-chloropropyltrimethoxysilane를 코팅 후 TS-1 nano seed를 안착시키고 마이크로웨이브 합성법을 이용한 2차 성장을 통해 3~4 mum의 두께를 가지는 얇은 TS-1 제올라이트 분리막을 제조하였다. 제조한 분리막을 이용하여 에틸벤젠/메타자일렌/파라자일렌이 혼합된 혼합 자일렌으로부터 에틸벤젠을 분리하였다. 마이크로웨이브 합성 온도가 증가할수록 제올라이트 결정의 크기가 비례하여 증가하였다. 또한 반응기의 온도가 200℃에서 가장 높은 투과 플럭스와 선택도를 가졌다. 가장 좋은 에틸벤젠 분리 성능을 보인 분리막은 마이크로웨이브 합성 온도가 170℃인 분리막이고 선택도 값은 2.64였다(에틸벤젠 투과 플럭스 : 1703.0 mol/m2·s·Pa).

The effects of nano addition to superconducting properties of processed superconductors was examined. 0.1 wt.% and 1 wt.% nano powders were mixed with boron and magnesium powders by ball milling. The powder mixtures were made into pellets by uniaxial pressing. The pellets were heat-treated at in argon atmosphere for formation. It was found by powder X-ray diffraction that the raw powders were completely converted into after the heat treatment. The superconducting transition temperature () and critical current density (), estimated from susceptibility-temperature and curves, were decreased by nano addition. The and decrease by nano addition are attributed to the incorporation of iron and carbon with lattices (Fe substitution for Mg and C substitution for B) due to the high reactivity of the nano powder.

통항선박의 횟수가 잣은 연안의 항로주변은 선박에 의해 발생하는 항주파로 정온화가 필요한 항만시설이나 마리나에 많은 외력을 주게 된다. 이는 이동 및 정박 중인 선박이나 항만시설의 안정성을 저해시키는 요인으로 작용한다. 본 연구에서는 항만시설 및 마리나가 설치된 해역의 정온해역을 확보하고자 수치해석 및 수조시험을 통하여 고정형 부유식 구조물 설치에 따른 구조물로 인한 파고변화 및 주위의 유체역학적 특성을 파악하고자 하였다. 해상환경에 따른 소파효

The unsafe act and unsafe condition is induced by the fundamental cause factors of industrial accidents. In this paper, stress is classified into job, life and workplace stress. Therefore, the purpose of this paper is to develop a Korean stress model focused on the unmarried workers in order to prevent fundamental industrial accidents. The results of this paper are followed. First, the oriental culture and idea in Korea is directly connected to the central axis of all life. Accordingly, concrete and systematic safety management methods should be proposed from the point of Korean culture. Finally, the industrial accident questionnaire needs an item that reports the mental and physical condition of workers in order to prevent occupational diseases.

Magnetic nanoparticles for ferromagnetic fluids and magnetorheological fluids were prepared by chemical coprecipitation and mechanical milling, respectively. The surface-treated particles were dispersed at various weight ratios into a medium of polyethylene glycol. In order to evaluate the elastic modulus of the fluids, ultrasonic pulse velocities were measured with an ultrasonic test using transducers of 5MHz and 2.25MHz. The ultrasonic signals were only available with a transducer of 2.25 MHz at fluid concentrations of 5 mg/ml and lower. In the case of applying transducers over 2.25 MHz and concentrations over 5 mg/ml to the fluids, it was impossible to observe effective ultrasonic signals due to an excessive scattering of the pulses by the dispersed particles. Elastic moduli of the magnetorheological fluids were 5.44 GPa and 6.13 GPa with concentrations of 25 mg/ml and 50 mg/ml, respectively; these values were higher by 40% than the values of 4.04 GPa and 4.28 GPa of ferromagnetic fluids at the same concentrations. As for the effect of an external magnetic field on these dilute fluids, the ultrasonic signals were positioned in a very similar way, which was probably due to insufficient arrangement of the particles even though the reflection energy of the ultrasonic waves apparently increased.

In this study, a method was developed using molecular biological technique to distinguish an authenticity of meats for processed meat products. The genes for distinction of species about meats targeted at 12S or 16S genes in mitochondrial DNA and the species-specific primers were designed by that PCR products' size was around 200bp for applying to processed products. The target materials were 10 species of livestock products and it checked whether expected PCR products were created or not by electrophoresis after PCR using species-specific primers. The results of PCR for beef, pork, goat meat, mutton, venison, and horse meat were 131, 138, 168, 144, 191, and 142 bp each. The expected PCR products were confirmed at 281, 186, 174, and 238 bp for chicken, duck, turkeymeat, and ostrich. Also, non-specific PCR products were not detected in similar species by species-specific primers. The method using primers developed in this study confirm to be applicable for composite seasoning including beefs and processed meat products including pork and chicken. Therefore, this method may apply to distinguish an authenticity of meats for various processed products.

연못하루살이의 성장에 필요한 유효적산온도를 구하고 자 2011년 8월 7일부터 10월 10일까지 야외에 설치한 실 험 수조에서 실험을 수행하였다. 실험 수조 설치일로부터 4일 경과 후 수면에서 죽은 암컷 성충 한 개체가 발견되 어 산란이 이루어졌을 것으로 추정하였으며, 산란추정일 로부터 39일째부터 성충이 우화하기 시작하여 61일째에 마지막 개체가 우화하였다. 우화한 성충은 총 229개체였 고, 성비(암컷 수/전체 수)는 0.45로 수컷이 많았으나 통 계적으로 유의하지 않았으며(p¤0.05), 전체적으로 수컷 이 먼저 우화하는 경향을 보였다. 최저 발육임계온도를 0􀆆C로 하여 유효적산온도를 산출한 값은 1,221.8±116.0 DD였으며, 대조습지의 연간 유효적산온도가 5,650.0 DD 임을 고려할 때, 연못하루살이는 본 연구결과를 적용할 경우 야외 서식처에서 최대 1년 4세대의 생활사를 가질 가능성이 있다.

 ,  , The size of infective Steinernema arenarium juveniles is variable and ranges from 724 to 1408 ㎛. Effects of harvest time and infective juvenile size on pathogenicity, development, and reproduction were examined in the last instar of the great wax moth, Galleria mellonella. Harvest time of infective juveniles (IJs) of S. arenarium affected pathogenicity. IJs harvested at the 10th day from trapping were more pathogenic than those harvested the 3rd day from trapping. Mortality of G. mellonella also depending on harvest time, i.e, 100% died within 48h when IJs were harvested at the 10th day, without relation to size. However, mortality was 40% in the small size group (SSG) compared with 18% in the large size group (LSG) within 48h when IJs were harvested at the 3rd day. Establishment of S. arenarium within the host was different depending on IJ size. The number of established IJs was 1.8 in the SSG, 3.3 in the LSG, and 3.2 in the mixed size group (MSG) when IJs were harvested at the 3rd day, and 5.3 in the SSG, 7.4 in the LSG, and 7.6 in the MSG when IJs were harvested at the 10th day. The length of the female adult was 7,070.5 ㎛ in the SSG and 7,893.9 ㎛ in the LSG and that of the male was 1,460.5 ㎛ in the SSG and 1,688.2 ㎛ in the LSG when IJs were harvested at the 3rd day. The length of the female adult was 7,573.6 ㎛ in the SSG and 8,305.4 ㎛ in the LSG and that of the male adult was 1,733.4 ㎛ in the SSG and 1,794.4 ㎛ in the LSG when IJs were harvested at the 10th day. Harvest time and size of IJs did not influence numbers of progeny or size of IJS.

This study aims to analyze the performance of a submersible fish cage which was designed for developing an economical cage system can be applied in korean aquaculture environment easily. To analyze the performance of the designed cage a model test was carried out. In the test, inclination changes of the upper frame and mooring tensions of model cage were measured during the submerging and surfacing motion in still water and wave condition (period: 2s, wave height: 0.1, 0.2, 0.3m). As a result, in the still water condition the model cage kept horizontal balance and inclination degree of the upper frame was about 1˚. In the wave condition, the model cage showed bilateral symmetric up-and-down motion but the average inclination degree of the upper frame was about 0˚. When the model cage reached at a depth of 1m, the up-and-down motion of the cage was decreased by 12% compared with that of at the surface (period 2s, height 0.3m). In the same wave condition, the maximum and average line tension under the bottom position were about 8% and 11% respectively compared with that of at surface.

본 연구는 간척지에서 재배가 가능한 내염성 보리 품종육성을 위한 기초정보를 얻고자 겉보리 두 품종을 대상으로 생육초기 염 스트레스에 따른 생리적 반응과 잎 프로테옴의 발현양상 변화를 분석한 결과는 아래와 같다. 1. 토양의 염 농도가 증가함에 따라 보리의 건물중은 무처리구에 비해 유의적으로 감소하는 경향이었으며, 상록보리는무처리구에 비해 건물중 감소가 작았으며, 선우보리는 컸다. 2. 염처리에 따른 잎의 엽록소 함량을 나타내는 SPAD 값은상록보리가 57.6으로 47.6인 선우보리보다 높았으며, Na+의 함량은 선우보리에서 유의적으로 높았고, K+/Na+의 비율은 상록보리에서 높은 경향을 보였다. 3. 이차원전기영동에 의하여 염 스트레스에 의한 잎 프로테옴의 발현양상을 분석한 결과 47개 단백질 spot이 발현양의차이를 나타냈다. 품종별로 발현양이 증가한 단백질 spot은 상록보리와 선우보리에서 각각 17개와 14개로 나타났고, 발현양이 감소한 단백질 spot은 상록보리와 선우보리에서 각각 28개및 27개로 확인되었다. 4. 염처리에 따른 발현양의 차이를 보이는 18개 단백질을 동정한 결과 ribosomal protein 등 기능과 스트레스와의 관련성이 보고된 10개의 단백질과 ankyrin repeat domain protein등 스트레스 조건에서의 역할이 명확하지 않은 4개의 단백질및 Os02g0753300 등 기능 및 스트레스와의 관련성을 알 수없는 2개의 단백질이 동정되었다.

The aim of this study was to evaluate the TEMPOⓇ STA automated most probable number (MPN) system for the enumeration of Staphylococcus aureus (S. aureus) in comparison with a standard culture method. Artificially inoculated food products with S. aureus - triangle kimbap, sliced spring onion, dried filefish fillet, danpatjuk (sweet red-bean porridge with small rice dumplings)- were tested in this study. Twenty-five grams of each of food samples were added into 225 ㎖ of sterilized phosphate buffered saline in a TEMPOⓇ stomacher bag followed by stomaching for 2 min. One milliliter of the stomached sample was added to a bottle of culture medium. Cards were filled and sealed in the automated filler and then were incubated for 24 h at 37℃. After incubation, the cards were placed in the automated TEMPOⓇ reader and MPN results were generated. For comparison with a culture method, decimal dilutions were prepared from the same homogenized samples described above, transferred onto Baird Parker and Baird Parker-Rabbit Plasma Fibrinogen (BP-RPF) agar plates, and then incubated at 37℃ for 24 h. The performance of TEMPOⓇ STA method is equivalent to the culture method using Baird Parker or BP-RPF agar count plate for the enumeration of S. aureus in foods, eliminating a time-consuming and laborious process.

본 시험은 버뮤다초지에서 이탈리안 라이그라스 파종시기가 목초생산성 및 식생변화에 대해 조사하기 위하여 2009년 9월부터 2010년 10월까지 해발 200 m에 위치한 제주도 제주시 오등동에 위치한 국립축산과학원 난지축산시험장 방목초지(해발 200 m)에서 수행되었다. 남방형 목초인 버뮤다그라스 초지에서 시험구를 난괴법 3반복으로 배치하였다. 이탈리안 라이그라스는 파종전 버뮤다그라스 목초를 초장이 2~3 cm 정도 높이로 예취를 한 후 파종을 하였다.

 ,  , Occurrence of Scrobipalpa salinella (Zeller) was investigated on glasswort in Shinan, Jeonnam and Kimjae, Jeonbuk from 2010 to 2011. The occurrence of S. salinella observed four times in a year. Adult stages of S. salinella in two areas occurred from mid-April to late September. The peak times of 1st, 2nd and 3rd generation adults of S. salinella was observed on early May, mid-June, late July (in Kimjae) to early August (in Shinan) and early September, respectively. And larval stages of S. salinella occurred from late May to late August. The peak times of development of 1st, 2nd and 3rd generation larvae of S. salinella was observed on mid-June, mid-July and mid-August, respectively. However, the 4th generation larvae began to occur in mid-September but didn’t damage in glasswort. Among the distances from the bank of glasswort field (3, 6, 9 m) and periods of damage (Jun. 16, Jul. 7, Aug. 12), larval density in 3 m distance from the bank in 1st damage season (Jun. 16) was high which resulted to severe damage. Damage of 2nd and 3rd generation larvae was progressed both density of larvae and levels of damage.

현대 사회에서 기상청의 날씨 정보는 점점 중요해지고 있으며, 최근에 장기예보에 대한 관심이 증대되고 있다. 장기예보는 국가 차원에서 기온, 강수량을 중심으로 하여 서비스되고 있으며, 이러한 공공성 정보를 토대로 민간 부문에서도 다양한 장기예보 서비스를 제공 중이다. 이러한 장기예보 서비스는 산업 부문의 효율성 제고에도 유용한데, 이러한 측면에서 본 연구는 에너지 산업에 필요한 장기예보 활용 방안을 수립하고자 하였다. 에너지 산업에 맞는 효율적인 장기예보 활용 방안은 실제적인 수요 조사를 바탕으로 유용성, 활용성, 사용자 편의성, 업무 효율성을 토대로 수립되었으며, 단계별 활용 전략이 수립되었다. 즉 1단계에서는 장기예보 서비스의 홍보와 인지도 향상, 2단계에서는 장기예보 서비스 강화를 위한 정비, 3단계에서는 맞춤형 장기예보 서비스 개발 및 연구 수행, 4단계에서는 서비스 정보 고효율화 및 활용 극대화를 목표로 활용방안이 수립되었다. 이러한 활용 방안은 에너지 산업의 장기예보 활용을 보다 활성화시킬 수 있을 뿐 아니라, 다른 산업 부문의 활용성을 확대시키는데 유용한 프레임 워크를 제공할 수 있으리라 기대된다.

태풍 등 자연환경적인 요인과 통항선박 등에 의해 발생하는 항만에서의 파도는 정온화가 필요한 항만시설이나 마리나는 많은 외력에 노출되어 있다. 이는 이동 및 정박 중인 선박이나 항만시설의 안정성을 저해시키는 요인으로 작용한다. 본 연구에서는 수치해석을 통하여 항만 시설 및 마리나가 설치된 정온해역이 필요한 해역에 최적의 부유식 소파제의 유체역학적 특성을 파악하고자 하였다. 해상환경에 따른 소파효율 산출하고 부유식 소파제의 재원 변화 등에 따른 형상비에 대한 해를 제시하고자 한다.

The present study focused on the synthesis of Bi-Te-Se-based powder by an oxide-reduction process, and analysis of the thermoelectric properties of the synthesized powder. The phase structure, chemical composition, and morphology of the synthesized powder were analyzed by XRD, EPMA and SEM. The synthesized powder was sintered by spark plasma sintering. The thermoelectric properties of the sintered body were evaluated by measuring its Seebeck coefficient, electrical resistivity, and thermal conductivity. powder was synthesized from a mixture of , , and powders by mechanical milling, calcination, and reduction. The sintered body of the synthesized powder exhibited n-type thermoelectric characteristics. The thermoelectric properties of the sintered bodies depend on the reduction temperature. The Seebeck coefficient and electrical resistivity of the sintered body were increased with increasing reduction temperature. The sintered body of the powder synthesized at showed about 0.5 of the figure of merit (ZT) at room temperature.