The main purpose of this study is to analyse economic feasibility of low-carbon-oriented gear for anchovy boat seine. The results of benefit/cost analysis showed that use of the low-carbon fishing gear is economically feasible. Considering the fuel saving and relatively low CO2 emission by reducing the resistance of gear, net present value by such type 1 gear improvement was estimated about -2,490 ~ -1,580 million won with the benefit-cost ratio 0.81~ 0.88. And net present value by such type 2 gear improvement was estimated about 6,540 ~ 7,780 million won with the benefit-cost ratio 1.79 ~ 1.94. Development of lowcarbon trawl gear would render significant contributions to reducing CO2 emission in fishing operations and lead to reduce fishing costs due to fuel savings.

Hydro-acoustic surveys with scientific echo sounder were carried out to estimate the total density and distribution of the juvenile cod in Jinhae bay, Korea. The surveys were conducted 4 times from May to June using 2 frequency method (38kHz and 120kHz) and beam trawl were used to investigate the species composition. Also the catch amounts of juvenile cod were compared with the cod density estimated by the hydro-acoustic method. It was confirmed that the juvenile cod was stayed in Jinhae bay in early June and There was the relationship between catch of juvenile cod and the estimated density by hydro-acoustic survey. The number of juvenile cod was consequently about 365,000 fish (CV 12.9%) in May and 113,000 fish (CV 9.2%) in May based on the hydro-acoustic data.

The objective of this study is to estimate the optimal net twine thickness of drift net for yellow croaker. The filed experiments of the fishing performance were conducted with three kinds of drift net with different monofilament diameters (No.3=0.284mm, No.4=0.330mm, No.5=0.370mm) the total eight times in the southwest coastal sea of Korea. And the physical properties tests on the monofilaments of experimental net were carried out to estimated breaking load and softness in dry and wet conditions, respectively. From the results, the No.3 mono. was the strongest break load per unit area in dry and wet conditions. And the softness showed that the No. 3 mono. was the most soft than another experimental monofilaments. The fishing performance was; the No. 3 drift net showed the most catches. Conversely, the catches of No. 4 and No. 5 drift net showed the half on the catches of No. 3 drift net. Consequently, the diameter of monofilament in the drift net for yellow croaker should carefully choose to consider the economic sides such as the amount of catches and the cost of catches.

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear during fishing operation is generally related to hydrodynamic resistance on the gear. This research demonstrates a new approach using numerical methods to reduce fuel consumption. The results from the simulation were verified with results that mirrored the model experiments. By designing the fishing gear using drawing software, the whole and partial resistance force on the gear can be calculated as a result of simulations. The simulation results will suggest suitable materials or gear structure for reducing the hydrodynamic forces on the gear while maintaining the performance of the gear. Furthermore, the efficiency of low energy used anchovy dragnet as economic point of view will be dealt. This research will helpful to reduce the GHG emissions from fishing operations and lead to reduce fishing costs due to fuel savings.

This study was performed to have an effect on control the growth of algae such as "Actinastrum fluviatile" which occurs frequently in the aquaculture tank using by a cold plasma, and it also would be expected to promote the growth of water plants due to active element causing OH radicals in the water. In addition, it was verified on the death rate as 99.9% on the scale protrusion of "Aeromonas hydrophila" as well as E. coli, especially, under extreme conditions more than 100 million pathogenic bacterium in the aqua pet tank, the ornamental fish had to act in a safe and healthy environment at over 98% death rate within 48 hours. It has been proven to give no affect on aerobic bacteria that exist in the filter or soil because there was no residual toxicity in the water tank. As the results, it will help to develop and apply on the sterilization device in other industries as well as aquarium organisms due to adopted energy-saving algorithm and reliability in use.

This study compared the disasters in construction field under construction amount of 300,000,000 won and the whole construction fields in order to improve the efficacy of various industrial safety and health policies and services and examined the characteristics of disasters in construction field under 300,000,000 won. It also examined, compared and analyzed the characteristics of disaster in construction field under construction amount of 300,000,000 won that disaster prevention technical experts saw. The subjects of comparison were selected with statistical data of disaster for 2011 and those of disaster in construction field under construction amount of 300,000,000 won from January to August of 2012. And questionnaire was conducted with technical instruction experts of small-sized construction field and priority was drawn, compared and analyzed with AHP. Consequently, the results of different views between actual disaster data and experts' views were obtained. Therefore, this study suggested the characteristics of disaster in construction field under construction amount of 300,000,000 won and presented the methods for improving disaster prevention technical experts.

Acoustical backscattering characteristics of Japanese anchovy can be estimated by Kirchhoffray mode model (KRM model) due to estimate exact body and swim-bladder shape of the fish, the samples were rapidly frozen by dry-ice and alcohol. X-ray photos for ventral and lateral direction for 6 samples were taken and the 3D coordinates of the body swim-bladder were estimated by digitizing from the photos. The angles between the axis of body and swim-bladder were about 9˚ at 38kHz and 7˚ at 120kHz, 200kHz. General formula of TS and BL estimated were 〈 TS38kHz 〉=20logBL-67.3, 〈 TS120kHz 〉=20logBL-66.6, 〈 TS200kHz 〉=20logBL-67.0. As a result, we confirmed KRM model is very useful to estimate TS (Target Strength) for design of experiment and it also can be applied to estimate the abundance of Japanese anchovy distributed by 2 frequency difference method in the survey area.

The main purpose of this study is to analyse economic feasibility of low-carbon-oriented trawl gear. The results of benefit/cost analysis showed that use of the low-carbon fishing gear is economically feasible. Considering the fuel saving and relatively low CO2 emission by reducing the resistance of gear, net present value by such gear improvement was estimated about 2,430~2,853 million won with the benefit-cost ratio 1.65~1.84 and the internal rate of return 29.18~30.48 percent. Development of low-carbon trawl gear would render significant contributions to reducing CO2 emission in fishing operations and lead to reduce fishing costs due to fuel savings.

One of representative Korean fisheries, jigging and angling has 5,700 vessels for squid and hairtail. Hairtail angling is the most typical fishery in Jeju and has an enormous impact on regional economy. However, the price hike in oil and labor costs triggered the necessity of developing a high efficient and energy saving fish luring lamp in recent times. For that reason, this study aimed to analyze the fishing performance of the aircooled LED lamp targeting hairtail angling fishery. The experiment was conducted from September through October in 2009-2011 for a 9.77 ton of fishing vessel setting up 100 lamps. The fishing performance was tested compared with 6 vessels using metal halide lamps in the same waters. As the LED lamp's performance goes up, different lamps were used in 2008 for 80W, 2009 for 120W and 2011 for 180W respectively. The catch and CPUE of the experimental vessel have gradually increased respectively taking the 4th and 6th place in 2009, the 4th and 2nd place in 2010, the 1st and 1st place in 2011 among the 7 vessels. In summary, the LED fishing lamp showed higher fishing performance than comparison groups. It saved 33% of oil consumption and cut down on operating expenses and greenhouse gases emission.

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear during fishing operation is generally related to hydrodynamic resistance on the gear. This research demonstrates a new approach using numerical methods to reduce fuel consumption. The results from the simulation were verified with results that mirrored the model experiments. By designing the fishing gear using drawing software, the whole and partial resistance force on the gear can be calculated as a result of simulations. The simulation results will suggest suitable materials or gear structure for reducing the hydrodynamic forces on the gear while maintaining the performance of the gear. Furthermore, the efficiency of low energy used trawl as economic point of view will be dealt. This research will helpful to reduce the GHG emissions from fishing operations and lead to reduce fishing costs due to fuel savings.

Hybrid surveys using hydroacoustic and fish sampling gears such as trammel net, trap were conducted to investigate total biomass, distribution and dominant fish species of the demersal fishes in the marine ranching area (MRA) of Jeju. Four surveys were carried out in June, August, October and November using 38kHz quantitative echo sounder. Catch data using trammel net and trap were used to calculate biomass and to examine dominant fish species. Fish schools were mainly detected in the waters of 20 meters below and around Chagwido waters. By the result of fishing experiments, fish species living in MRA of Jeju were about 40 species, dominant fish species of a detectable fish such as Family Sparidae and Family Monacanthidae etc. were identified 59.4~68.8% of total biomass. Based on the hydroacoustic data, fish length-weight function and target strength information, mean density of the demersal fish estimated were as follows; 0.88g/m2 on June, 1.12g/m2 on August, 1.35g/m2 on October and 1.18g/m2 on November. An estimated average biomass in MRA of Jeju was founded 20.5 tons in 2007, 20.6 tons in 2008, 23.0 tons in 2009, 25.9 tons in 2010. The results showed that biomass of MRA is getting increased slowly. Therefore the hybrid survey method using hydroacoustic and fish sampling gears is assured an effective biomass survey in the waters of mixed species.

Currently, environment-friendly and sustainable fisheries are one of the major issues among fisheries authorities. A variety of alternative management policies and projects are going on to enhance fisheries management systems and fishery resources such as a TAC management program and a VDS (Vessel Day Scheme) management scheme for distant water fishing nations in Western and Central Pacific Fisheries Commission (WCPFC) convention area. These kinds of efforts among fisheries management authorities are aimed at limiting fishing capacity or fishing power. In terms of fisheries management, Fishing capacity and fishing power have increased the importance of the impact on a fishery and level of the resources. Increased fishing capacity and fishing power have caused not only depletion of fisheries resource, but also additional fishing cost. therefore, there is a clear need for authorities to manage fishing capacity and fishing power. It is also help ensure the conservation and sustainability of the fishery resources. Because of lack of data, absolute fishing power is difficulty to measure. The notion of relative fishing power is frequently used. In this study, relative fishing power was assessed using Mastuda (1991) method for fishing power index. The raw data for assessment was based on fishermen's logbook data from sampled fishing vessels in coastal snow crab gillnet fishery. Data Envelopment Analysis (DEA) method was used to assess fishing capacity. DEA is a linear programming methodology to measure the efficiency of a set of entities called Decision-Making Units (DMUs). It was recommended by FAO for assessing capacity in fisheries.

The mesh selectivity of a drift net for yellow croaker (Larimichthys polyactis) was examined in field experiments with six different net mesh size (40, 45, 50, 55, 60 and 65mm) from April to December, 2008 in the coastal areas of Jeollanam-do in Korea. The total catch of 6,748 consisted of yellow croaker (n=6,310; 89.1% of total catch), common mackerel (n=158; 5.6%) and other species (n=280; 9.6%). The selectivity curve for yellow croaker was fit by the models of selectivity curve in SELECT method. The optimal mesh size for 50% retention for minimum landing size (191mm) of yellow croaker was estimated as 49.6mm-51mm by selectivity curves. And the bi-normal model for the selectivity curve was found to fit the data best.

For the optimal design of a shrimp pot to control the catch size and to reduce catch the small size shrimp, tank experiments were carried out to study the pot stability under water. Tank experiments were carried out to measure the drag with 4 kinds of model pots that have 50% selection on the individual of 25mm carapace length. The drag of each pot was measured every 10 times with changing the current speeds from 0.1m/s to 0.7m/s in 0.1m/s intervals and the pot attack angle from 0˚ to 90˚ in 15˚ interval in a flume tank. The relation between the current speed and drag was presented. The stability of pot was estimated using the drag data and the friction data of Kim et al. (2008b). The results showed that, the drag was shown lower as small as the projected area of pot depending on the current speeds and angles. The model pots were showed to slide on the seabed in case of rock at the current speeds 0.35-0.38m/s and the possibility of turn over at the current speeds 0.77-0.89m/s. In conclusion, the stability of a shrimp pot showed more stable as the pot of the lower the height and the smaller projected area on current.

Korea enacted the occupational safety and health law in order to prevent industrial accidents in 1981. Led by ministry of labor, occupational safety and health support services policy has been built through government-affiliated organizations, research institutions and academic research. Korea's accident rate has remained at 0.7% for last 10 years despite continuous efforts over the last 30 years. These results means that the occupational safety and health support services policy conducted by the government have reached their limits. Therefore, the necessity of assessment about occupational safety and health support services policy is proposed. The main objective of this study, through the IPA analysis, is to grasp the point of worker's needs about occupational safety and health support services policy and to help formulate the efficient policy.

As a fish way is a structure for fish migrating well toward upper stream due to breaking river flow by a dam or dammed pool, the specific fish's swimming ability is one of the main factors in making a plan and managing it. In addition, it also needs to understand the current field in fish road to evaluate its performance. This study is aimed to analyze the swimming patterns with current velocity changes using a Particle Imaging Velocimetry (PIV) in order to understand the swimming ability of silver fish (Plecoglossus altivelis) that is one of the fishes migrating through the fish way of Nakdong River, and to analyze the 2 dimensional current field near to silver fish at swimming momentum. The results showed that average values of tail beat frequencies for continuous swimming with current velocity were 2.8 Hz at 0.3 m/s, 3.2 Hz at 0.4 m/s, 3.8 Hz at 0.5 m/s, respectively. The wake would be produced by direction turning of fish's tail fin and its magnitude would be verified by the difference of pressure. The pressure turbulent flow produced by its tail beat would be made in both sides, and then, the magnitude of wake should be the source of moving direction. The swimming momentum will help to support the primary factor in making a suitable design for specific fish species migrating toward the district river.

Depending on changes in industrial structure, industrial accident preventive measures have been developed in various forms. The focus for prevention of industrial accidents had been changed from part of the hardware to behavior and consciousness of workers. According to the change of focus, Korea's industrial accident preventive measures also has been adjusted to voluntary safety and health considering the safety culture and such attempts of preventive measures has contributed for reducing the accident rate. Safety culture is difficult to access due to the fact that factors that make up the safety culture are comprehensive and varied and there are many of external factors that affect to the safety culture. Moreover, there is a limit for applying specific preventive measures. Because, management culture or value of enterprises is various depending on each country or region. Nevertheless, looking at previous studies of advanced countries, they are presenting the fact that safety leadership has greater influence to formation of the safety culture. As a result, we study the Influence of manager's safety leadership that effect on safety culture. we want to propose the way to activate safety culture in workplace and to contribute for safety culture research.

The efforts to reduce industrial accident has been brisk recently in workplace. These efforts were mainly concentrated on construction and manufacturing. Despite these efforts, current accident rate so far has been maintained on the fixed level. According to the change of industrial structure, the government's attention on industrial accident prevention activities are focused in service industries. When trying to appraise the result of such activities, it is impossible to evaluate safety without certain criteria. Therefore, we analyze data by TOPSIS method that all the subway institution jointly manage every year. we decide the order of safety priority between domestic subway workplaces and measure the variation in safety by sensitivity. As a result, we draw conclusions to improve safety for the primary consideration and suggest alternatives.