This study aimed to determine the optimal planting density for sesame cultivation in a double cropping system after harvesting onion and garlic in the Muan region. It compared the growth, yield, disease susceptibility, and labor hours for two varieties of sesame (Landrace and Geonbaek sesame) at different planting densities. Plant height in the Landrace sesame showed no significant variation with different planting densities, whereas Geonbaek sesame increased in height with higher planting densities. Both cultivars increased the number of viable branches at lower densities. The stem diameter was thicker in Landrace sesame with decreasing planting density, while in the Geonbaek sesame, there was no significant difference in stem diameter regardless of planting density. The number of capsules per plant for the Landrace sesame increased with decreasing density, whereas Geonbaek sesame showed no significant difference. Yield for both cultivars was higher at greater densities. However, the late direct sowing time and shorter cultivation period significantly reduced the yield of sesame cultivated in a double cropping system compared to that of sesame grown in a single cropping system, due to the late direct sowing time and shorter cultivation period. There was no significant difference in disease occurrence based on planting density. Furthermore, although labor hours did not vary with planting density when comparing the labor hours required for cultivating the Landrace sesame and Geonbaek sesame, the latter needed less labor time. This study reveals the optimum planting distance and density for sesame cultivation as a double cropping after harvesting onion and garlic, providing invaluable data for establishing sesame double cropping cultivation techniques.

Despite advancements in therapeutic approaches, radiotherapy and cisplatin-based chemotherapy remain primary noninvasive treatments for patients with oral squamous cell carcinoma (OSCC). Moreover, the 5-year survival rate for patients with OSCC has remained almost unchanged for several decades, and many side effects of chemotherapy still exist. In this study, three-dimensional (3D) models of OSCC were established using fibroblasts, and the efficacy of various biological inhibitors was evaluated. A culture of epithelial cells with two types of fibroblasts (hTERT-hNOFs and cancer-associated fibroblasts) within a type I collagen matrix resulted in the formation of a continuous layer of tightly packed cells compared to models without fibroblasts. Furthermore, the effects of biological chemicals, including Y27632, latrunculin A, and verteporfin, on these models were investigated. The stratified formation of the epithelial layer and invasion in OSCC 3D-culture models were effectively inhibited by verteporfin, whereas invasion was weakly inhibited by Y27632 and latrunculin. Collectively, the developed OSCC 3D-culture models established with fibroblasts demonstrated the potential for drug screening, with verteporfin showing promising efficacy.

본 연구는 딸기의 삽목 육묘 시 묘소질을 향상시키고 품질을 증진시키기 위한 지베렐린 효과를 검증하기 위해 수행되었다. 품종은 ‘설향’을 대상으로 하였고, 삽목 시 삽수의 기부를 30, 60분간 GA3 50, 100, 150mg·L-1에 침지 처리하고 증류수 침 지를 대조구로 두었다. 정식 시 묘소질 조사 결과 엽수와 SPAD 값은 지베렐린 침지시간이 길수록 증가하였고, 초장, 엽병장, 엽장, 엽폭, 엽면적은 침지시간과 농도 간의 상호작용에 따라 유의하게 값이 변하였다. 관부직경은 같은 농도라 할지라도 침지시간에 따른 차이가 나타났으며 30분, 100mg·L-1 처리를 제외하고 모두 직경이 8.0mm 이상으로 우량한 묘가 생성되 었으며, T/R률은 30분, 50mg·L-1 처리에서 유의하게 작아 식 물체 활력이 가장 우수했다. 양자수율은 농도가 150mg·L-1일 때 저조하였고, 지베렐린 처리 농도가 높을수록 양자수율이 감소하는 경향을 나타냈다. NPQ는 대조구 대비 30분, 150mg·L-1 처리에서 유의하게 작아 묘 스트레스 감소에 효과 가 있었다. 항산화물 함량은 30분, 50mg·L-1 처리와 60분, 150mg·L-1 처리에서 높게 나타났고, 정식 후 생육조사 결과 화아분화 정도에 미치는 지베렐린의 부정적 영향은 없었다. 따라서, ‘설향’ 딸기의 삽목 육묘 시 지베렐린 처리는 정식묘 양성에 효과가 있는 것을 확인할 수 있었으며, 이때 대조구 대 비 생육 증진 및 품질 향상을 위해서는 삽수 기부를 50mg·L-1 의 지베렐린에 30분 침지처리하는 것이 보다 적정한 것으로 판단되었다.

This study was conducted to investigate the growth characteristics of domestic 'Sulhyang' strawberry (Fragaria × ananassa Duch.) seedlings and to analyze their relationships in order to develop a growth prediction model. Fresh weight, dry weight, and leaf area were measured to validate the newly developed growth model. The relative growth rate (RGR) of ‘Sulhyang’ seedlings’ dry weight was an average of 0.026 g·g-1·d-1, and it increased to 0.066 g·g-1·d-1 on the 49th day after transplanting (DAT). The relationship between DAT and RGR was represented as RGR (dry weight)(g·g- 1·d-1) = 0.0392/(1 + exp(–(DAT – 34.9940)/5.8662)). The crop growth rate (CGR) was an average of 0.060 g·m-2·d-1, and it increased to 0.211 g·m-2·d-1 on the 70th DAT. The relationship between DAT and CGR was calculated as CGR (dry weight)(g·m-2·d-1) = 0.1293/(1 + exp(–(DAT – 49.3917)/6.0928)). The relationship between shoot fresh weight (y) and shoot dry weight (x) per plant showed a linear relationship of y = 4.3189x + 0.7812 (R2 = 0.9976). Fresh weight, dry weight, and leaf area with respect to DAT and cumulative temperature increased exponentially, and sigmoid curve models were developed based on these data. The model with the highest coefficient of determination was found for the relationship between shoot dry weight (y) and cumulative temperature (x), represented as y = 14.2285/(1 + exp(–(x – 1590.1295)/377.8112)) (R2 = 0.9715). The results of this study can be utilized as valuable information for establishing a systematic management system for seedling production using strawberry cutting propagation methods. For the development of a more precise growth prediction model in the future, it is necessary to analyze and apply a wider range of growth indicators and meteorological factors related to strawberry seedlings.

This research was conducted to analyze the relationship between the induction time of runners and the growing degree days for domestic strawberry cultivars, 'Sulhyang' and 'Arihyang'. Runners were induced at 15-day intervals over five periods, starting from late April to early June, and the study compared the number of runner formations and temperature changes for each period while it also investigated the plantlet quality on the transplanting date. Based on back calculations from the transplanting date of September 18th, 'Sulhyang' required induction from late April to early May to achieve 70-day-old plantlets and from late April to mid-May for 60-day-old plantlets. On the other hand, 'Arihyang' needed induction from late April for 70-day-old plantlets and from late April to early May for 60-day-old plantlets. To secure about 20 daughter plants, the growing degree days needed to be around 1,000°C, and a delay in runner induction led to a delay in formation of daughter plants. The relationship between growing degree days and runner formation was expressed as the following quadratic equations: for 'Sulhyang,' y = 9E-06x2 + 0.0124x – 2.4806 (R2 = 0.9696), and for 'Arihyang,' y = 1E-06x2 + 0.0192x – 2.9274 (R2 = 0.9431), and these equations showed high correlations. The crown diameter on the transplanting date was thickest in mid-May for 'Sulhyang', and it tended to increase with delayed runner induction for 'Arihyang'. In conclusion, this study confirmed that the number of daughter plants and growth characteristics varied depending on strawberry cultivars and the timing of runner inducement time. The relationship equations derived through measurements of growing degree days can be used as the fundamental data for reasonable production of daughter plants in the future.

This study was conducted to identify the optimal root zone temperature for paprika cultivation, with an aim to increase the heating and cooling energy efficiency and prepare for extreme weather conditions. The greenhouse air temperature was maintained at 20oC and 25oC during the daytime (12 hours) and at 18oC during the nighttime (12 hours). The plant height did not show any significant differences between the treatment with air temperature and root zone temperature. The root length was highest under an air temperature of 25oC with root zone temperatures of 25oC and 30oC, and it was the lowest at 15oC. The leaf number was the highest when the root zone temperature was adjusted to 25oC and 30oC across all air temperatures. The leaf area increased with higher root zone temperatures, but considering the compactness of the seedlings, a root zone temperature of 25oC was found to be the most effective. The fresh and dry weight of the shoot increased with higher root zone temperatures at an air temperature of 25oC, while the fresh and dry weight of the roots tended to be higher when the root zone temperature was adjusted to 25oC and 30oC across all air temperatures. The compactness was most effective when the root zone temperature was adjusted to 20oC and 25oCC across all air temperatures. Based on the above results, adjusting the root zone temperature to 25oC at an air temperature of 25oC was found to be effective for the early growth of Paprika. The results of this study suggest that not only can growth be promoted through the regulation of root zone temperature, but it also contribute to the establishment of root zone temperature control technology, which can prevent an excessive drop and rise in the root zone temperature.

This study compared the physicochemical properties of soybean curd residue and black soybean curd residue produced by hot air-drying and freeze-drying. Regardless of drying method, the crude protein, crude ash, crude fiber contents, pH, L, a, b color values and water soluble index were higher in soybean curd residue, whereas total polyphenol contents and antioxidant activity were higher in black soybean curd residue. Significant differences in water absorption index, oil absorption capacity and emulsion activity were observed between soybean curd residue and black soybean curd residue in freeze-drying. On the other hand, the emulsion stability was not significant difference in both hot-air drying and freezedrying. The crude protein and crude fiber contents of soybean curd residue were not significant difference between hot-air drying and freeze-drying. Freeze-drying resulted in higher crude ash contents, pH, water absorption index, water soluble index, oil absorption capacity, emulsion activity and emulsion stability than hot-air drying. Hot-air drying have caused significantly higher water contents, water activity, total polyphenol contents and antioxidant activity in soybean curd residue than freeze-drying. In conclusion, soybean type and drying methods affect the physicochemical and quality characteristics of soybean curd residue, which could be important factors in the manufacture of processed foods.

This study was conducted to determine the optimal dipping time and concentration of gibberellin for improving the growth and quality of domestic cultivar 'Seolhyang' strawberry when using runner plants. Strawberry runner plants were collected on November 10th and soaked in GA3 concentrations of 50, 100, and 150 mg·L-1 for 30 and 60 minutes, respectively. After 75 days of planting, the growth results showed that in the 30-minute, 50 mg·L-1 treatment, the crown diameter was thicker and the T/R ratio was lower, indicating better plant vitality. Runner length increased with lower gibberellin concentrations, particularly promoting vegetative growth. Photosynthetic efficiency was more influenced by gibberellin concentration than dipping time, and using concentrations above a certain threshold acted as a stress factor for runner plants, leading to decreased photosynthetic efficiency. For enhancing seedling growth, soaking with 50 mg·L-1 of gibberellin for 30 minutes was found to be optimal. This study verified the effects of gibberellin treatment on strawberry runner plants to improve plant growth and quality, providing useful basic data for using gibberellin.

주변 국가인 태국, 캄보디아, 베트남, 라오스 등에서 벼멸구(Nilaparvata lugens)와 흰등멸구(Sogatella furcifera)를 채집하던 중, 벼멸구와 형태가 아주 유사한 이삭멸구(N. muiri)와 벼멸구붙이(N. bakeri), 그리고 흰등 멸구와 형태가 아주 유사한 흰등멸구붙이(S. kolophon), 피멸구(S. vibix) 그리고 애멸구(Laodelphax striatellus)가 동시에 채집이 되는 등 형태적 차이점이 거의 없어 전문가도 쉽게 구분하지 못하는 문제가 있음이 확인되었다. 따라서 형태가 유사한 상기 멸구류의 종 동정을 확실히 할 수 있는 PCR용 프라이머의 개발을 위해 벼멸구 및 흰등멸구의 미토콘드리아 내 COI 영역을 특이적으로 검출할 수 있는 프라이머 세트를 제작하고 종 동정 효과를 확인하였다.

The growth characteristics according to temperature conditions were investigated in the breeding room of the Sericulture & Entomology Experiment Station for Oriental garden crickets(Teleogryllus emma Ohmachi et Matsuura) and Modeagali-crickests(Loxoblemmus doenitzi Stein) collected from the lawns of Byeonsan-myeon, Buan-gun, Jeollabuk-do. The temperature conditions were 6 treatments from 15°C to 40°C at 5°C intervals using a multi-incubator, and the development period and mortality rate by age were compared using the 28°C breeding room conditions as a control. For T. emma, the higher the temperature, the shorter the total development period was, and the same trend was observed for the growth period by age stage. However, at low temperatures of 15°C and 20°C, all died after the third instar, and at high temperatures above 35°C, all died during development. At 25°C and 30°C, they developed normally, and the mortality rate was about 25%. The L. doenizi had the same tendency as the T. emma, with the higher the temperature, the shorter the development period. The total development period was 57.7 days at 25°C, which was similar to the T. emma's 55.9 days, and the mortality rate was the lowest at 44% at 25°C.

In 2022, research for native prokaryotic species in Korea reported 10 unrecorded bacterial strains affiliated to phyla Actinomycetota, Bacillota, and Pseudomonadota. The strains formed monophyletic clades with the most closely related species (with ≥98.7% sequence similarity) in the 16S rRNA gene sequencing. Among them, four species of the phylum Actinomycetota, two species of the phylum Bacillota, and four species of the phylum Pseudomonadota have not been reported in Korea, suggesting unrecorded species in Korea. Information on strains such as Gram staining reaction, colony and cell morphology, biochemical characteristics, and isolation sources were provided in the species description.

High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250oC.

Objectives of this study were to propose an optimal fertilization method of Chlorella and to evaluate its effects on growth of green pepper. Chlorella fusca strain was propagated and used in the experiment. As for treatment, drenching method (DM), foliar fertilization (FF), drench and foliar fertilization combination (DM + FF), and untreated control (CO) were used. Plant height of green pepper was higher in the CO treatment than in chlorella fertilized treatments. Chlorella fertilization inhibited stem growth of green pepper. Chlorophyll contents of green pepper leaves were higher in the DM + FF treatment. Yields were the higher in DM and DM + FF treatments than in other treatments. Vitamin C content was the highest in the DM + FF treatment. These results showed that Chlorella fertilization could increase the growth, yield, and bioactive substance content of green pepper. The Chlorella fertilization method could be applied to other crops. By applying this technology to the farmer, it is possible to increase income and supply healthy and safe high-quality agricultural products to consumers.

The purpose of this study was to investigate the effects of root zone temperatures (RZT) on the germination of bell peppers and tomatoes. Bell peppers and tomatoes had the highest germination rates (85% and 90%, respectively) at 25oC air temperature. Besides, the first germination of bell peppers was shifted by one day ahead. Bell peppers had the highest germination rate of 72,100, and 100%, respectively, when the RZT was adjusted to 30oC at airtemperature of 20, 25, and 30oC, and when the air temperature was adjusted to 35oC, the germination rate was the highest (70%) when the RZT was 15oC. Tomatoes had the highest germination rate at 20oC of the RZT at all atmospheric temperatures. A local cooling and heating system was established to improve the germination rate by controlling the RZT during the low and high temperature period. The optimum RZT for seedlings during the low and high temperature period was investigated.

본 연구는 난방 개시 온도와 CO2 시비의 효율을 알아보기 위해 수행되었다. 난방 개시 온도 실험은 9℃, 12℃, 15℃로 구분하여 목표 온도보다 낮아지면 전기 온열기구가 작동하게 하였다. CO2 시비 농도 실험은 액화탄산가스를 이용하여 무 처리, 500μmol·mol-1, 800μmol·mol-1으로 7시부터 12시까 지 처리하였다. 생육 특성으로 초장, 경경, 엽수, 엽면적, 생체 중, 건물중을 조사하였고, 200g 넘는 과실만을 대상으로 수량 을 조사하여 경제성 분석을 하였다. 상위엽에 대한 광합성 측 정을 하여 처리에 따른 포화점을 산출하였다. 애호박의 광포화 점은 587μmol·m-2·s-1이였고 CO2 포화점은 702μmol·mol-1 이 였다. CO2에 의한 Amax값은 9℃, 12℃, 15℃, 500μmol·mol-1, 800μmol·mol-1 순으로 13.4, 17.8, 17.2, 19.6, 17.5μmol CO2·m-2·s-1이었다. 온도 실험에서 9℃는 생육과 착과가 정상 적으로 이루어지지 않았다. 12℃와 15℃는 9℃보다 높았지 만 생육과 생산에서 유의미한 차이를 보이지 않았다. CO₂ 농 도 실험은 생육에서 처리구간 유의한 차이를 보이지 않았지만 800μmol·mol-1의 생산성이 가장 좋았다. 이상의 결과를 종합 적으로 보면 난방 개시 온도는 15℃인 것은 작물 생육과 생산 에는 좋았지만 12℃와 유의적인 차이가 없어 경제적 측면에 서 난방 개시 온도를 12℃로 설정하는 것이 좋은 것으로 보이 며, CO2 시비 농도 800μmol·mol-1를 유지하는 것이 생산량 증가에 효과적이었다.

본 연구는 근권부 냉방이 토마토 육묘 시 묘 생육에 미치는 영향을 구명하고자 수행되었다. 생장상 하부 파이프 냉방을 이용하여 근권부 온도를 20°C와 25°C로 설정하여 실험을 수 행하였다. 전 생육기간동안 초장, 근장, 엽수는 두 온도 처리구 간 차이를 보이지 않았다. 엽면적, 지상부와 지하부의 생체중 및 건물중, 엽록소 함량은 파종 28일 경과 시 25°C 처리구가 더 높았으며, 실험 종료 시 두 처리구 간 유의한 차이를 보이지 않았다. 이상의 결과로 근권부 온도 20°C와 25°C에서 토마토 생육 차이를 확인하지 못했다. 따라서, 본 연구는 고온기 토마 토 묘 생산 시 온실 냉방 효율을 높이기 위한 국부 냉방 기술 확 립에 도움을 줄 수 있을 것이다.

The number of dismantled nuclear facilities is increasing globally. Dismantling of nuclear facilities generates large amount of waste such as concrete, soil, and metal. Concrete waste accounts for 70% of the total amount of waste. Since hundreds of thousansds of tons of concrete waste generated, securing technology of reduction and recycling of waste is emerging as a very important issue. The objective of this study is to synthesize geopolymer using inorganic materials from cement fine powder in concrete waste. Dismantled concrete waste contains a large amount of calcium silicate hydrate(C-S-H), Ca(OH)2, SiO2, etc., which is an inorganic material required for the synthesis of geopolymer. SiO2 affects the compressive strength of the geopolymer and Ca(OH)2 affects the curing rate. A high concentration of alkali solution is used as an alkali activator, and alkali activator is necessary for the polymerzation reaction of metakaolinite. The experiment consists of three steps. The first step is to react with concrete waste and hydrochloric acid to extract ions. In the solid after filtration, SiO2 and Al2O3 are composed of 84.10%. It can be used instead of commercial SiO2 required for the synthesis of geopolymer. The second step is to add NaOH up to pH 10, impurities can be removed to extract Ca(OH)2 with high purity. The final step is to add NaOH up to pH 13, and Ca(OH)2 extraction. The alkali solution generated after the last reaction can be recycled into an alkali activator during the synthesis of the geopolymer. If dismantled concrete waste is recycled during geopolymer synthesized, the volume reduction rate of dismantled concrete waste is more than 50%. If you put the radioactive waste in the recycled solidification materials synthesis from concrete waste by dismantling of nuclear facilities, it is possible to reduce the amount of waste generated and disposal costs.

Kori-1, the nuclear power plants in South Korea, first started operation in April 1978 and was suspended permanently in 2017. The saturation rate time of spent nuclear fuel generated by major nuclear power plants operating in Korea are getting closer. If we fail to dispose spent nuclear fuel, which is equivalent to high-level radioactive waste, the nuclear power plants will have to be shutdown. High-level radioactive waste is permanently disposed through a deep geological disposal system because it contains long-term half-life nuclides and emits high energy. To select the deep geological disposal site and construct the disposal facilities, it is necessary to establish appropriate regulatory policies accordingly. The status of database construction in OECD-NEA, NRC, SITEX, and IAEA, which provides safety regulations for deep geological disposal system, stipulates each requirement for dismantling nuclear power plants. However, details such as specific figures are not specified, and guidelines for the disposal of high-level radioactive wastes are not clearly distinguished. In Korea, the CYPRUS program, an integrated database system, has been developed to support comprehensive performance evaluation for high-level waste disposal. However, due to several difficult situations, maintenance and upgrades have not been performed, so the research results exist only in the form of raw data and the new research results have not been reflected. Other than that, there is no preemptive basis for regulating the deep geological disposal system. With real-time database, we can develop a regulatory system for the domestic deep disposal system by systematically analyzing the regulatory condition and regulatory case data of international organizations and foreign leading countries. The database system processed and stored primary data collected from nuclear safety reports and other related data. In addition, we used relational database and designed table to maximize time and space efficiency. It is provided in the form of a web service so that multiple users can easily find the data they want at the same time. Based on these technologies, this study established a database system by analyzing the legal systems, regulatory standards, and cases of major foreign leading countries such as Sweden, Finland, the United States, and Japan. This database aims to organize data for each safety case component and further prepare a safety regulatory framework for each stage of development of disposal facilities suitable for the domestic environment.