본 연구는 거리화단 화훼경관 조성 전·후의 스트레스 변화 를 알아보기 위하여, 순창 소재의 경찰관 총 18명을 대상으로 타액 채취 및 설문조사를 실시하였다. 생리 측정은 타액 코르 티솔, 혈압, 심리 측정은 식물 재배 활동 수준, 스트레스수준, 거리화단 화훼경관에 대한 간이 SD 감성을 측정하였다. 타액 코르티솔, 혈압의 사전/후 비교는 대응표본 t-test, 타액 코르 티솔, 혈압의 성별에 따른 집단간 사전/후 비교는, 독립표본 t-test, 스트레스수준, 간이 SD는 윌콕슨 부호 순위 검정 등으 로 분석하였다. 화훼경관 조성 전보다 조성 후 총 코르티솔 수 치가 낮아졌고, 식물 재배 활동 수준은 높아졌으나 통계적 유 의성은 없었다. 혈압은 여자의 경우 거리화단 화훼경관 조성 전과 조성 후 모두 정상 혈압이었고, 남자의 경우 거리화단 화 훼경관 조성 전 고혈압 전단계에서 조성 후 주의혈압으로 낮 아지는 긍정적 효과가 있었다. 거리화단 화훼경관 조성 전·후 의 스트레스수준을 총 4단계(총 4단계: 단계가 높을수록 스트 레스가 높은 수준임)로 문항 전체의 총합 수치로 알아본 결과, 화훼경관 조성 전에는 4단계(50.0%), 2단계(38.9%), 3단계 (11.1%) 순이었으나, 조성 후에는 4단계(44.5%), 2, 3단계(각 22.2%), 1단계(11.1%) 순으로 거리화단 화훼경관 조성 전에 는 1단계(정상적인 스트레스 상태로 스트레스요인 자체가 심 각하지 않거나 좋은 스트레스로 받아들인 경우)가 0%에서 조 성 후 11.1%로 높아졌다. 화훼경관 조성 전·후 SD법을 이용 하여 쾌적감, 자연감, 그리고 진정감에 대해 평가한 결과, 화 훼경관 조성 후 쾌적감, 자연감, 진정감이 높은 것으로 나타났 다(p<.05). 거리화단 화훼경관에 따른 식물 재배 활동 수준과 주요 변수간의 상관관계를 알아본 결과, 화훼경관 조성 후 식 물 재배 활동 수준과 스트레스수준, 스트레스수준과 진정감은 부(-)의 상관관계, 식물 재배 활동 수준과 쾌적감, 자연감, 진정 감과는 0.5 이상의 높은 정(+)의 상관관계가 있었다(p<.05). 따라서 식물 재배 활동 수준이 높아질수록 쾌적감, 자연감, 그 리고, 진정감은 높아지고, 거리화단 화훼경관이 없는 공간보 다 화훼경관이 있는 공간에서 쾌적감, 자연감, 그리고 진정감 을 더 크게 느끼는 것으로 판단되었다. 본 연구에서 거리화단 화훼경관을 통하여 고위험군의 높은 스트레스는 줄여주고 식 물에 대한 흥미, 관심과 심리적 안정효과는 높여 줄 수 있는 유용한 가능성이 있을 것으로 생각되었다.

Background: The biological information of fish, which include reproduction, is the prerequisite and the basis for the assessment of fisheries. Methods: The aim of this work was to know the reproductive biology with the first sexual maturity (TL50) and the spawning period for 58 mainly fish species in the waters around La Réunion Island (Western Indian Ocean). Twenty families belonging to the Actinopterygii were represented (acanthuridae, berycidae, bramidae, carangidae, cirrhitidae, gempylidae, holocentridae, kyphosidae, labridae, lethrinidae, lutjanidae, malacanthidae, monacanthidae, mullidae, polymixiidae, pomacentridae, scaridae, scorpaenidae, serranidae, sparidae; 56 species; n = 9,751) and two families belonging to the Elasmobranchii (squalidae, centrophoridae; 2 species; n = 781) were sampled. Between 2014 and 2022, 10,532 individuals were sampled covering the maximum months number to follow the reproduction periods of these species. Results: TL50 for the males and the females, respectively, ranged from 103.9 cm (Acanthurus triostegus ) to 1,119.3 cm (Thyrsitoides marleyi ) and from 111.7 cm (A. triostegus ) to 613.1 cm (Centrophorus moluccensis ). The reproduction period could be very different between the species from the very tight peak to a large peak covered all months. Conclusions: Most species breed between October and March but it was not the trend for all species around La Réunion Island.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

Background: Children with cerebral palsy face challenges in maintaining body stability because of structural and functional defects. Their ability for responsive balance control is diminished. While there exist various trunk stabilization exercises such as Kinetic Link training (KLT) and the Bird-dog posture, there is a notable dearth of research that applies KLT specifically to children with cerebral palsy. Objectives: To investigate the effects of KLT and Bird-dog exercise on gross motor function and balance in children with cerebral palsy. Design: Quaxi-experimental study. Methods: The study participants were randomly divided into two groups: 15 individuals in the KLT group and 15 in the Bird-dog group. General characteristics were examined, and initial measurements of Gross motor function measure (GMFM) and Pediatric balance scale (PBS) were taken prior to the intervention. Each group engaged in KLT exercises and Bird-dog exercises for 20 minutes, three times a week over an 8 week period. Following the completion of the 8 week intervention, secondary measurements of GMFM and PBS were conducted. Results: In the KLT group, both PBS and GMFM showed a significant increase after the intervention compared to before (P<.05). Similarly, in the Bird-dog group, both PBS and GMFM significantly increased after the intervention compared to before (P<.05). There was a significant difference observed in PBS when comparing the pre- and post-intervention changes between the two groups (P<.05), whereas no significant difference was found in GMFM between the groups when comparing the pre- and post-intervention changes (P>.05). Conclusion: The interventions involving KLT and Bird-dog exercises were observed to effectively enhance PBS and GMFM in children with cerebral palsy. Specifically, it was evident that KLT was more beneficial in improving balance abilities compared to Bird-dog exercise.

Background: Most non-pharmacological interventions for tension-type headache (TTH) focus on direct intervention in areas associated with headaches, with limited research exploring the indirect effects of interventions utilizing the fascia. Objectives: To investigate the effects of superficial back line (SBL) stretching and head-neck massage interventions on the range of motion (ROM) and neck disability index (NDI) of TTH. Design: Randomized controlled trial. Methods: The study participants were randomly allocated into three groups: SBL stretching group (n=9), head-neck massage group (n=9), and combined group (n=9). Prior to the intervention, measurements were taken for neck flexion ROM, straight leg raising test (SLRT) ROM, and NDI. The intervention consisted of 30-minute sessions conducted twice a week for 8 weeks. The second measurement took place 4 weeks after the intervention, followed by a third measurement conducted after an additional 4 weeks of intervention. Results: Comparing neck flexion ROM within each group, a significant increase was observed in the SBL stretching group after 8 weeks compared to before the intervention (P<.05). Regarding the comparison of SLRT ROM within each group, a significant increase was noted after 8 weeks compared to before the intervention in the SBL stretching, head-neck massage, and combined groups (P<.05). In terms of the comparison of NDI within each group, a significant decrease was observed in all three group after the intervention compared to before the intervention (P<.05). Conclusion: 8-week intervention involving SBL stretching, head-neck massage, and their combined application demonstrated effectiveness in improving neck flexion ROM, SLRT ROM, and the NDI for individuals with TTH.

Background: Chronic back pain not only causes physical discomfort and decreased functionality but also affects emotional well-being, resulting in feelings of anxiety, depression, and other psychological issues. Studies have indicated that cognitive functional therapy and motor control exercises can alleviate chronic low back pain and associated psychological issues. Objectives: To investigated the effect of chronic low back pain on the cognitive functional therapy (CFT) and motor control exercises (MCE). Design: Quaxi-experimental study. Methods: Forty patients with chronic low back pain were randomly assigned and divided into 20 cognitive functional therapy group with motor control exercises group (CFTMG) and 20 patients in motor control exercises group (MCEG). After applying CFT with motor control exercises and motor control exercises for 8 weeks, changes in numeric pain rating scale (NPRS), Oswestry disability index (ODI) and Fear-avoidance beliefs questionnaire (FABQ) were observed. Results: In the CFTMG, statistically significant changes were observed in NPRS, ODI, and FABQ before and after the intervention. In the MCEG, statistically significant changes were observed in VAS and ODI before and after the intervention. Conclusion: The application of CFTM and MCE in patients suffering from chronic low back pain has demonstrated effectiveness in alleviating pain, enhancing back function, and reducing kinesiophobia associated with the condition.

The complexation of silicon with carbon materials is considered an effective method for using silicon as an anode material for lithium-ion batteries. In the present study, carbon frameworks with a 3D porous structure were fabricated using metal–organic frameworks (MOFs), which have been drawing significant attention as a promising material in a wide range of applications. Subsequently, the fabricated carbon frameworks were subjected to CVD to obtain silicon-carbon complexes. These siliconcarbon complexes with a 3D porous structure exhibited excellent rate capability because they provided sufficient paths for Li-ion diffusion while facilitating contact with the electrolyte. In addition, unoccupied space within the silicon complex, combined with the stable structure of the carbon framework, allowed the volume expansion of silicon and the resultant stress to be more effectively accommodated, thereby reducing electrode expansion. The major findings of the present study demonstrate the applicability of MOF-based carbon frameworks as a material for silicon complex anodes.

소형 선박(<499 GT)이 전체 선박의 46%를 지배하고 있어 상대적으로 많은 CO2 배출가스를 가지고 있다고 결론지을 수 있다. 최 적의 Trim 조건에서 운전하면 선박의 저항을 감소시킬 수 있어 온실가스가 적게 발생할 수 있다. Trim을 최적화하는 가장 저렴한 방법 중 하 나는 최적의 Longitudal Center of Gravity(LCG)를 얻기 위해 무게 분포를 조정하는 것이다. 따라서 본 연구에서는 소형 선박의 저항에 대한 LCG 변화의 영향을 경험적 및 수치적 해석을 통해 연구하고자 한다. 선체를 설계하는 Savitsky 경험식은 Maxsurf Resistance의 방법으로 사용 된다. 수치해석에는 STAR-CCM+ 상용 CFD(Computational Fluid Dynamics) 소프트웨어가 사용되지만 최종적으로 선박 설계 과정 이후 최적의 LCG를 얻기 위해 전체 저항을 비교한다. 결론적으로 Froude Number 0.56에서는 수치해석에 의해 전체 길이(LoA) 46.2%에서 최적의 LCG를 달성하고 Froude Number 0.63에서는 43.4% LoA를 달성하여 29.2% LoA에서 기준점에 비해 최대 41.12% - 45.16%의 상당한 저항 감소를 얻을 수 있다.

나리(Lilium spp.)는 절화, 정원 식물 및 화분 식물과 같은 관상용 가치로 인해 가장 중요한 화훼 작물 중 하나이다. 나 리는 연작으로 인한 환경 스트레스에 민감하며, 환경 스트레 스의 원인 중 하나로는 염 스트레스가 있다. 본 연구는 분홍 색 오리엔탈 나리 'Medusa', 'Lake Carey', 'Ovada'의 생 육 시기별 염스트레스에 따른 표현형 및 색 관련 화합물 함 량 변화를 조사하였다. 염 처리는 생육 시기에 따라 다양한 처리기간(무처리, 발아 전, 발아 후, 전체 생육기간)에 주 1 회 염(8dS･m-1)처리를 실시하였다. 생육 시기별 염스트레스 에 의한 개화의 차이가 있었지만, 전체 생육기간동안 염 스 트레스 처리시 모든 품종에서 개화가 이루어지지 않았다. 염 스트레스 처리 시기에 따라 초장과 꽃의 크기가 감소율이 달 랐으며 'Medusa', 'Lake Carey'는 발아 후 염 처리에서 정 상 개화하였다. 또한, 염스트레스는 꽃과 같은 식물에서 생성 되는 색 관련 화합물인 페놀과 플라보노이드 함량도 시기별 로 차이가 있었다. 품종마다 차이는 있지만, 발아 전이 발아 후 염 처리보다 총 페놀과 총 플라보노이드 함량이 더 낮은 것을 확인하였다. 이 결과는 생육 시기에 따라 염 스트레스 에 의한 나리의 표현형과 화색 관련 화합물의 함량의 변화에 차이가 있었으며 생육초기 염스트레스에 의한 피해가 높은 것으로 판단된다.

본 연구는 대한민국 울릉도 특산식물인 추산쑥부쟁이(Aster × chusanensis Y.S.Lim, Hyun, Y.D.Kim & H.C.Shin)의 기내 대량증식체계 확립을 위해 시토키닌 계열 식물생장조절 제를 첨가하여 캘러스 및 신초 형성 조건을 구명하고자 수행 하였다. 실험결과, 추산쑥부쟁이의 줄기 절편체에서 캘러스 와 신초가 형성되었다. 캘러스 형성률은 TDZ 3.0mg·L-1처 리구에서 88.9%로 가장 높았고 BAP 3.0mg·L-1와 Zeatin 3.0mg·L-1 처리구는 66.7%, 2iP 3.0mg·L-1 처리구에서는 11.1%였다. 신초 형성률은 모든 처리구에서 77% 이상이고 특히 TDZ처리구와 Zeatin 처리구에서 100%였다. 그러나 TDZ처리구에서는 형성된 신초가 부풀어 오르거나, 잎에 과수 성이 나타나는 등 형태적 기형이 나타났다. Zeatin처리구에 서 발생한 신초는 정상적인 형태를 나타났다. 잎 절편체에서 는 캘러스, 신초가 발생하지 않았으며 절편체가 탈색하며 고 사하는 것을 확인하였다. 종합적으로 추산쑥부쟁이의 캘러 스 및 신초 형성을 위해서는 줄기 절편체를 배양 재료로 이 용하는 것이 효과적으로 확인되었다. 캘러스 유도에는 TDZ 3.0mg·L-1처리가 가장 효과적이었고, 추후 NAA와 같은 옥신 을 함께 첨가하여 증식 효과를 분석하는 연구가 필요할 것이 다. 또한, 신초 유도에도 TDZ 3.0mg·L-1 처리가 효과적이었 으나 장기간, 고농도로 사용할 경우 형태적인 기형이 발생할 수 있어 정상적인 식물생산에 부적합한 것으로 확인되었다. 따라서 형태적 기형이 발생하지 않은 아데닌 유도체형 시토키 닌인 Zeatin을 활용하는 것을 추천한다. 본 연구는 울릉도 특 산식물인 추산쑥부쟁이의 기내 대량증식과 생태계 유지에 필 요한 종 공급을 위한 대량증식 체계 구축을 위한 자료로 활용 할 수 있을 것이다.

This study was conducted to determine the acceptability of locally accepted japonica rice varieties among 53 farmers in Bohol and 38 farmers in Nueva Ecija, who were further classified into adopters and non-adopters of the GUVA japonica rice variety. Snowball sampling was made on farmer adopters/cooperators of a high-quality seed multiplication and dissemination project in the said provinces. The farmer respondents were mostly male whose ages ranged from 30 to 80 years and with farm sizes from 0.5 to 16 hectares. The farmers’ rice variety and usage were assessed by comparing the GUVA japonica rice variety with their commonly planted indica rice variety based on its agronomic characteristics, yield and income potential, and seed purity concerns. The barriers/hesitations to adoption of the GUVA japonica rice variety, namely seed availability, varietal information, and market potential, must be complemented with the suggested improvements on the variety together with factors that convince the farmers for committed use of this variety. Researchers together with partner agencies must put a lot of thought on how to integrate and synchronize these concerns so that the farmers can adopt GUVA japonica rice. Interest check on the usage of GUVA japonica rice variety in rice production as well as suggested improvements were solicited as the basis for continuous R&D pursuits that would eventually promote and adopt the GUVA japonica rice variety from these provinces.

Canine hyperadrenocorticism, a prevalent endocrine disorder characterized by excessive cortisol production. Notably, hypercoagulability leading to pulmonary thromboembolism (PTE) poses a substantial concern. PTE may be underestimated because of the rapid dissolution of canine thrombi postmortem. However, traditional coagulation assays face challenges in early detection of hypercoagulability. Therefore, this study explored the use of thromboelastography (TEG) as a diagnostic tool for identifying hypercoagulability in dogs with hyperadrenocorticism. A total of 31 dogs visited the Gyeongsang Animal Medical Center between 2018 and 2022, comprising 21 dogs with hyperadrenocorticism and 10 controls who underwent clinical and coagulation analyses. Hyperadrenocorticism was diagnosed using a low-dose dexamethasone stimulation test or adrenocorticotropin hormone stimulation test, and conventional laboratory parameters and coagulation parameters, such as the prothrombin time, activated partial thromboplastic time, fibrinogen, and TEG results, were compared between the groups. Clinical data revealed significantly elevated monocyte, platelet, alanine aminotransferase, alkaline phosphatase, triglyceride, and cholesterol concentrations in dogs with hyperadrenocorticism, which were attributed to excess cortisol secretion (p<0.05). TEG analysis demonstrated significantly decreased K values and increased α and MA values in hyperadrenocorticism dogs (p<0.05), indicating a shortened clotting time and enhanced clot strength, suggestive of hypercoagulability. TEG effectively highlights hypercoagulability in dogs with hyperadrenocorticism and provides valuable insights in predicting blood clot formation. Although predicting clot formation in dogs remains complex owing to multifactorial influences, this study underscores the potential utility of TEG in enhancing such predictions for dogs with hyperadrenocorticism.

Currently, non-volatile nuclides such as 94Nb, 99Tc, 90Sr, 55Fe, and 59/63Ni are used a sequential separation. In this study, we developed a separation for 99Tc and 90Sr by a carbonate precipitation. Sodium Carbonate (Na2CO3) was inserted in the aqueous sample from a Dry Active Waste (DAW) and a carbonate precipitation was produced. The precipitate is composed of di- or tri-valent element such as Co, Sr, Fe, Ni and the supernatant is composed of mono-valent element (Cs) and anion materials (ReO4 -, TcO4 -). In DAW, it was confirmed that the recovery of 90Sr (precipitate) and 99Tc (supernatant) were > 90%, respectively. The precipitate and supernatant separated by using a Sr-resin and an anion-exchange resin, respectively. The separated samples were measured by a Liquide Scintillation Counter (LSC, 90Sr) and Induced-Coupled Plasma-Mass Spectroscopy (ICPMS, 99Tc).

For safe disposal of radioactive wastes, accurate analysis of nuclear isotopes is important. It is known that there are 14 nuclides that have to identify nuclide-specific concentration levels. 63Ni, one of non-volatile nuclear isotopes which is included in those 14 nuclides, has to follow chemical separation for exact analysis. As various analysis methods were developed, various methods for analyzing 63Ni also emerged. Past method has used measurement specimens of 59Ni, after 59Ni measurement has been done. It used HClO4, known as strong oxidizing agent, to dissolve DMG, an organic substance used to form 59Ni precipitates. Nowadays, we analyze 59Ni and 63Ni simultaneously, which enables short analysis time, without use of HClO4. But high accuracy is just as important as short measurement time and efficiency. So, this paper compare 63Ni specific activity value used new method with the value, past method used, using real sample’s data. As a result, all sample data from new method’s relative 63Ni specific activity is within the uncertainty range of past ones based on past specific activity value. Consistency of new method’s result and past method’s data increased the reliability of the data and accuracy of those methods.

Molten chloride salts have received considerable research attention as potential nuclear fuel and coolant candidates for molten salt reactors. However, there are several challenges, especially for structural materials due to the selective dissolution of chromium (Cr) in the molten chloride salts environment. Understanding the compatibility of uranium (U), which is used as nuclear fuel in molten salt reactors, with Cr in molten chloride salts is critical for designing the molten salt reactor structure. Therefore, in this study, the cyclic voltammetry (CV) was used to investigate the electrochemical behaviors of U and Cr. The diffusion coefficients and formal potentials were obtained. The electrochemical properties of uranium and chromium were investigated by CV in molten NaCl-MgCl2 salt at 600°C. Tungsten rods for working and counter electrode, and Ag/AgCl for reference electrode were utilized in this experiment. UCl3 made from the chemical dissolution of U rods and CrCl2 (Sigma-Aldrich, 99.99%) were used. Diffusion coefficients (D) of U and Cr were calculated by measuring reduction peak current of U3+/U and Cr2+/Cr from CV curves and using the Berzins-Delahay equation; D (U3+/U) = 3.0×10-5 cm2s-1 and D (Cr2+/Cr) = 3.3×10-5 cm2s-1. The formal potentials were also calculated by using the reduction peak potential obtained from CV results; E0’ (U3+/U) = -1.173 V and E0’ (Cr2+/Cr) = -0.321 V. The ionization tendency was investigated by comparing each reduction peak potential. The reduction peak potential Ep,c was increasing order of Ep,c (U3+/U) < Ep,c (Cr2+/Cr) < Ep,c (U4+/U3+). It can be seen that in the presence of U4+ and Cr metals, the Cr in the alloy can dissolve into Cr2+, but in the presence of U3+ and Cr metals, the Cr in the alloy does not dissolve into Cr2+. By analyzing the CV curve, diffusion coefficients and formal standard potentials were obtained. The result of comparing reduction peak potentials suggests that the nuclear fuel using U4+ should be inhibited to prevent the selective dissolution of Cr.

To achieve permanent disposal of radioactive waste drums, the radionuclides analysis process is essential. A variety of waste types are generated through the operation of nuclear facilities, with dry active waste (DAW) being the most abundant. To perform radionuclides analysis, sample pretreatment technology is required to transform solid samples into solutions. In this study, we developed a dry ashing-microwave digestion method and secured the reliability of the analysis results through a validity evaluation. Additionally, we conducted a comparative analysis of the radioactivity of 94Nb nuclides with and without the chemical separation process, which reduced the minimum detectable activity (MDA) level by more than 65-fold for a certain sample.

After the Fukushima accident in 2011, relevant concerns regarding the contamination of the natural environment rose abruptly. For example, water contaminated by radionuclides such as Cs and Sr may directly flow into the ocean and threaten the marine ecosystem. In this respect, costeffective and efficient decontamination techniques need to be developed and verified to remediate the contaminated water. Prussian blue (PB) is known as a representative material that can adsorb Cs by ion-trapping and is widely used for medical purposes. However, there is a limitation that PB itself is non-separable and highly mobile in aqueous system, so it needs a fixture, such as bentonite, to be collected after the adsorption. Furthermore, while the performance of PB toward Cs is relatively well known, its behavior toward Sr has rarely been reported. The object of this study is to investigate the sorption characteristics of Cs and Sr onto PB-functionalized bentonite at various conditions. The adsorbent employed in the present work was prepared by mixing bentonite, FeCl3, and K4[Fe(CN)6] at room temperature for 24 hours in the aqueous solution. The concentrations of FeCl3 and K4[Fe(CN)6] were set to a range of 5-200 % compared to the cation exchange capacity of bentonite. After that, the PB-functionalized bentonite was sieved with a mesh size of 63 μm and then reacted with the Cs and Sr solution at various liquid-to-solid (L/S) ratios of 2-10 g/L for up to 500 minutes. Moreover, synthetic seawater containing additional Cs and Sr was reacted with PBfunctionalized bentonite to characterize the ion selectivity of PB. After the completion of the adsorption experiment, a part of the adsorbent was separated and desorption of Cs and Sr with 2 M of nitric acid was performed. For the quantification of aqueous Cs and Sr concentrations, ICP-MS was employed after the filtration with a pore size of 0.45 μm. The result obtained in this study revealed a high sorption affinity of Cs and Sr onto PBfunctionalized bentonite. The analysis results also presented that the sorption reactions of Cs and Sr reached their steady state within 10 minutes of reaction time. Furthermore, the ion selectivity toward Cs and Sr was verified through sorption test with synthetic seawater. According to the high sorption affinity and selectivity, the PB-functionalized bentonite synthesized through this study is expected to be widely used for remediating the Cs- and Sr-contaminated groundwater and seawater, particularly in nuclear waste-relevant industries.

Nuclear facilities present the important task related to the migration and retention of radioactive contaminants such as cesium (Cs), strontium (Sr), and cobalt (Co) for unexpected events in various environmental conditions. The distribution coefficient (Kd) is important factor for understanding these contaminants mobility, influenced by environmental variables. This study focusses the prediction of Kd values for radionuclides within solid phase groups through the application of machine-learning models trained on experimental data and open source data from Japan atomic energy agency. Three machine-learning models, such as the convolutional neural network, artificial neural network, and random forest, were trained for prediction model of the distribution coefficient (Kd). Fourteen input variables drawn from the database and experimental data, including parameters such as initial concentration, solid-phase characteristics, and solution conditions, served as the basis for model training. To enhance model performance, these variables underwent preprocessing steps involving normalization and log transformation. The performances of the models were evaluated using the coefficient of determination. These results showed that the environmental media, initial radionuclide concentration, solid phase properties, and solution conditions were significant variables for Kd prediction. These models accurately predict Kd values for different environmental conditions and can assess the environmental risk by analyzing the behavior of radionuclides in solid phase groups. The results of this study can improve safety analyses and longterm risk assessments related to waste disposal and prevent potential hazards and sources of contamination in the surrounding environment.

The presence of organic components in spent scintillation liquid should be considered during all steps of radioactive waste processing for final disposal. Scintillation liquids often referred to as cocktails are generated form radiochemical analyses of radionuclides, which mainly consists of mixtures of liquid organic materials such as toluene and xylene. Typical features of these liquid organic materials are volatility, combustibility and toxicity. These are the reason why special attention must be paid to the management of liquid organic radioactive wastes. To select an appropriate waste management strategy and to design the treatment process of spent scintillation cocktails, it is required to investigate the nature of the waste such as specific radioactivity and moisture content. The analysis results of spent scintillation liquid generated at Wolsong nuclear power plants will be discussed. An overview of the technical approaches available for the treatment of organic radioactive waste will be additionally provided.