CFRP composites have high specific strength, specific stiffness, long fatigue life, light weight environmental safety characteristics. In this study, the mechanical properties are investigated through the compressive simulation analysis on the carbon fiber reinforced plastic sandwich. The experiment is carried out with the same condition as the analysis to verify the analysis result. One sandwich plate is composed with four layers. From the upper, this plate has the first, second, third and fourth layers due to the arrangement of angle direction. A plate has the symbol of [0/30/30/0] as the first, second, third and fourth layers due to the angle directions of 0°, 30°, 30° and 0°. There are the plates of [0/30/30/0], [0/60/60/0] and [0/90/90/0] in this study. The maximum compressive load becomes 53.139kN during the compression time of 12 sec in case of the plate of [0/30/30/0]. The maximum compressive load becomes 61.826kN during the compression time of 12 sec in case of the plate of [0/60/60/0]. The maximum compressive load becomes 53.002kN during the compression time of 12 sec in case of the plate of [0/90/90/0]. So, the plate of [0/60/60/0] endures the most load among three plates. The result of this study can be applied practically through the validation of experimental data on the simulation data. In this study, the mechanical characteristics are examined systematically through the impact analysis on the composite material of the carbon fiber reinforced plastic with aluminum foam by using the impact absorption due to CFRP plate.

현재 방음을 위해 사용되는 흡음구조는 흡음률이 높은 재료를 이용하여 만들어진 판을 방음이 필요한 벽에 붙이거나 삽입하는 형상이다. 이러한 형상은 흡음재의 재료가 고정되기 때문에, 사용하는 환경에 따라 효율성이 변화한다는 한계점이 있다. 하지만, 흡음재 없이 흡음효과가 나타나도록 외벽의 구조를 설계한다면, 흡음재의 재료에 대한 제한이 없어져 가용 범위가 상당히 넓어지게 된다. 따라서 우리는 이러한 효율적인 외벽의 구조로서 타공판의 구조를 제안한다. 타공판이 어떻게 흡음률을 가지는 지에 대해 등가물성치를 이용한 수치해석을 통하여 검증하였다. 또한 타공판의 형상과 공명기의 형상이 유사함을 밝혀내었고, 이를 토대로 타공판이 갖는 흡음구조에 대해 분석하였다. 결과적으로 타공판은 별도의 흡음재가 없더라도 효율적인 흡음효과를 낸다는 것을 확인할 수 있었다. 또한 사용자가 타공판의 형상을 쉽게 변화시킴으로서, 특정한 주파수의 소음을 차단할 수 있어 상당히 효율적인 흡음구조임을 확인하였다. 본 연규의 결과들은 향후 자동차, 고속철도, 주택 외벽 등에 사용되는 흡음구조로서 사용될 수 있을 것이며, 나아가 흡음구조를 설계하는데 기본적인 도구가 될 수 있을 것이다.

In an automated industry PLC plays a central role to control the automation system. Therefore, fault free operation of PLC controlled automation system is essential in order to maximize a firm’s productivity. A prior test of control system is a practical way to check fault operations, but it is a time consuming job and can not check all possible fault operation. A formal verification of PLC program could be a best way to check all possible fault situation. Tracing the history of the study on formal verification, we found three problems, the first is that a formal representation of PLC control system is incomplete, the second is a state explosion problem and the third is that the verification result is difficult to use for the correction of control program. In this paper, we propose a transformation method to reproduce the control system correctly in formal model and efficient procedure to verify and correct the control program using verification result. To demonstrate the proposed method, we provided a suitable case study of an automation system.

Source term analysis should be carried out to prepare the decommissioning of the nuclear power plant. In the planning phase of decommissioning, the classification of decommissioning wastes and the cost evaluation are performed based on the results of source term analysis. In this study, the verification of MCNP/ORIGEN-2 model is carried out for preliminary source term calculation for Wolsung Unit 1. The inventories of actinide nuclides and fission products in fuel bundles with different burn-up were obtained by the depletion calculation of MCNPX code modelling the single channel. Two factors affecting the accuracy of source terms were investigated. First, the neutron spectrum effect on neutron induced activation calculation was reflected in one-group microscopic cross-sections of relevant radio-isotopes using the results of MCNP simulation, and the activation source terms calculated by ORIGEN-2 using the neutron spectrum corrected library were compared with the results of the original ORIGEN-2 library (CANDUNAU.LIB) in ORIGEN-2 code package. Second, operation history effect on activation calculation was also investigated. The source terms on both pressure tubes and calandria tubes replaced in 2010 and calandria tank were evaluated using MCNP/ORIGEN-2 with the neutron spectrum corrected library if the decommissioning wastes can be classified as a low level waste.

본 연구에서는 구조용강 시험편 내의 크랙의 성장특성을 주제로 하여 중앙크랙만이 존재하는 시험편과 중앙 크랙의 주변에 대칭으로 구멍들이 존재하는 시험편에 대한 파괴역학적 거동을 규명하고자 하였다. 구조용강으로 만들어진 시험편 내에 두 가지의 조건들을 적용하여 인장실험을 수행하였으며, 이를 통하여 시험편의 응력, Strain energy와 변형량에 대하여 해석하였다. 그리고 이러한 실험값들을 바탕으로 하여 응력확대계수를 구하였으며, 구해진 실험값들의 검증을 위하여 ANSYS 유한요소 해석 프로그램을 사용하여 시뮬레이션 해석을 수행하였다.

The honeycomb aluminum foam of the porous metal has the merit of the impact absorption, the soundproof, the heat conductivity, the light weight. Aluminum 6061-T6 is used at the materials for the automobile, the ship, the machine and various structures. In this study, the sandwich combined with the honeycomb aluminum foam and aluminum 6061-T6 is simulated with the impact. Two kinds of models made by use of CATIA program with 3 kinds of impact energies are analyzed by ANSYS program. As the simulation result, the maximum deformations at the cases of 1 and 2 are shown as 4.8205mm and 11.909mm respectively. And the maximum equivalent stresses at the cases of 1 and 2 are shown as 274.45MPa and 265.6MPa respectively. As the simulation result at case 1 approaches the experimental result, all simulation results can be verified in order to apply into analyzing the impact properties of the honeycomb aluminum foam sandwiches. In cases of three kinds of impact energies, the striker is not shown to penetrate the upper face sheets of case 1. At the impact energy of 100 J, the striker is not shown to penetrate the upper face sheets of case 2. At the impact energies of 200 J and 300 J, the striker is shown to penetrate the upper face sheets of case 2. It is thought to predict and improve the structural safety the composite material combined with the aluminium foam by using this study result.

Recently, the light weight and the safety of automobile are the important targets of automotive design and the parts for car have been substituted the plastic or the porous material for the steel material. As the aluminium foam has many pores at its surface, it has the fatigue property of bonded face which differs from general material. In this study, two dimensional model is designed and performed with the fatigue analysis as the variable(θ value) becomes the slant angle of bonded face at the specimen with the aluminium foam. As the analysis result on the models with the slant angles of 6°, 8° and 10°, the bonding forces are disappeared when the fatigue loads are repeated during 4000 cycle, 4500cycle and 5000cycle respectively. By comparing with the analysis results of three models, the fatigue cycle to endure fatigue load becomes larger as the slant bonded angle becomes higher. So, the structural safety can be seen by applying only as only a simulation of finite element method instead of the experiment where much cost and time is spent. In this study, the configuration of aluminum foam is designed with the shape of TDCB Mode II. The shear fatigue strength of the bonded structure can be evaluated by the analysis program of ANSYS.

ADCPs have been widely used to estimate the dynamic characteristics and biomass of sound scattering layers (SSLs), and swimming speed of fish schools for analyzing SSLs spatial distribution and/or various behavior patterns. This result showed that the verification of the mean volume backscattering strength (MVBS or averaged SV, dB) acquired by the ADCP would be necessary for a quantitative analysis on the spatial distribution and the biomass estimation of the SSLs or fish school when ADCP is used for estimating their biomass. In addition, the calibrated sphere method was used to verify values of each MVBS obtained from 4 beams of ADCP (153.6 kHz) on the base of 3 frequencies (38, 120, 200 kHz) of Scientific echo sounder's split beam system. Then, the measured SV values were compared and analyzed in its Target Strength (TS, dB) values estimated by a theoretical acoustic scattering model.

Modern weapon systems are getting more complex in terms of the functionality and also the conditions on the environment and range in which they are deployed and used. Therefore, many development programs can easily be exposed to a variety of risks, resulting in delayed schedules and cost overrun. As such, effective means are necessary to keep the defence budget at an affordable level while competitive edges on technological aspects are retained. As one way to meet those need, modeling and simulation (M&S) methods have widely been used, particularly in the test and evaluation (T&E) process for weapon systems development. The result of M&S-based systems development should be evaluated by the verification, validation & accreditation (VV&A) process to assure keeping reliability at a desired level. On the other hand, due to the explosiveness, the weapons systems development naturally requires to consider safety issues in both the T&E and operational periods. The purpose of this paper is to improve the VV&A process by reflecting the safety requirements therein. To do so, the VV&A process has been analyzed and graphically modeled first and then safety elements have been incorporated effectively. The use of the improved process in the war ships development has also been discussed. Based on the process proposed and the consequent database constructed, the target system can be expected to benefit from reducing development risks while assuring systems safety.

The author has proposed and verified the accuracy through experiments on a method of measurement through the use of sound waves that not only can quantitatively measure each of the dual directions of the fiber axis with high accuracy of membrane tension created on the surface of the membrane structure, but also can be easily operated in the field of construction. This paper reports the solution for problems of variables caused in the process of downsizing of the measurement equipment in order for practical use, and verifies the correspondence possibility of various stress ratios.

PURPOSES: Evaluation of thermal conductivity and convection properties of asphalt mixture by using thermodynamics. METHODS: In this research, temperature prediction model based on thermodynamics is derived for asphalt mixture in transient state and it is verified with laboratory test results. RESULTS: The derived temperature prediction model shows good agreement with laboratory test results. CONCLUSIONS: It is concluded that the derived model based on thermodynamics and thermal properties in the literature are good enough to capture temperature variation in laboratory test. The approach based on thermodynamics can be applied to more complex temperature simulations.

이 논문에서는 경계반력법을 이용한 비선형 지반-구조물 상호작용 해석을 위해 LS-DYNA나 MIDAS/Civil 등의 유한요소해석 프로그램과 연계하는 방법을 제시하였다. 경계반력법 적용시 유한요소프로그램에서 구조물과 지반은 선형 또는 비선형 유한요소를 이용하여 모델링하였다. 유한요소의 해석모델 외부의 무한영역으로 전달되는 탄성파를 최대한 흡수하기위해 유한요소 모델의 외측에 LS-DYNA의 경우에는 PML(Perfectly Matched Layer) 요소를, MIDAS/Civil의 경우에는 점성감쇠-스프링 요소를 적용하였다. 비선형 유한요소는 구조물영역에만 적용되는 것으로 가정하였다. 이 연구에서는 입사지진파에 의한 경계반력은 KIESSI-3D 프로그램을 이용하여 계산하였다. 선형 지반-구조물 상호작용 문제에 대해 일반적인 KIESSI-3D의 해석결과와 BRM해석결과를 비교하여 제시된 방법의 효율성을 제시하였다. 또한 수치적 비교를 통해 비선형 구조에 대해 보수적인 응답을 보이는 선형 SSI문제에 대하여 얻은 경계반력이 비선형 지반-구조물 상호작용해석에 효과적으로 적용 가능함을 알 수 있었다.

우리 해군은 함정 제품모델(Naval Ship Product Model, NSPM)을 중심으로 하는 협업 제품개발 환경 구축을 통해 설계 데이터의 재사용성과 M&S의 활용도를 높이고 있다. 그 결과 설계결과의 신뢰성이 높아지고 있으며, 이를 활용한 운영, 건조 시뮬레이션을 통해 소요군의 요구사항이 면밀히 반영되도록 하는 연구도 진행 중에 있다. 이에 따라 설계 데이터의 DB 구축 및 그 품질에 대한 중요성이 부각되고 있으나, 그와 관련된 연구는 초기상태에 머물러 있는 실정이다. 본 연구에서는 저자들의 선행연구 결과인 함정 제품모델의 품질검증 방법론에 기초하여 함정 제품모델을 구성하고 있는 형상요소의 구체적인 품질검증 방안과 이를 자동화하기 위한 연구를 수행하였다. 함정 제품모델 데이터 중 상대적으로 중요하며, 검증과정에 많은 시간이 소요되고 있는 선각모델을 사례연구 대상으로 정의하였으며, 자동차산업에서 사용되고 있는 제품데이터품질(Product Data Quality, PDQ)을 형상검증 기준으로 활용하였다. 최종적으로 선각모델의 형상 품질검증을 위한 기준과 알고리즘을 제안하였으며 이에 기반 한 초기 시스템을 개발하였다.

조선소의 생산성은 제한된 자원을 얼마나 효율적이고 체계적으로 관리하고 사용하는가에 달려있다. 최근 들어 조선소에서는 생산관리 시스템을 고도화하기 위해 시뮬레이션 기법을 적용한 연구가 활발히 진행되고 있다. 본 논문에서는 시뮬레이션 기법을 생산관리에 적용한 조선소의 시뮬레이션 기반 생산 개념을 연구하였다. 이는 조선소 현장에서 경험과 직관에 의한 의사결정을 지양하고, 정량적이고 구체적인 데이터에 기반을 둔 개선방안을 확립할 수 있게 한다. 본 논문에서는 조선소의 생산 계획 중 선표 계획 영역에 대한 시뮬레이션 적용 연구를 수행하였으며, 이를 위해 조선소의 생산 계획 프로세스와 시스템을 분석하고 상용 시뮬레이션 소프트웨어를 이용한 시뮬레이션 시스템의 설계를 수행하였다. 이러한 시뮬레이션 시스템은 현재 조선소 생산관리 시스템의 운용환경을 고려하여 웹 환경에서 운용가능한 구조를 갖고 있으며, 이를 통해 조선소에서는 보다 손쉽게 생산 계획을 시뮬레이션하고 결과를 분석함으로써 보다 신뢰도 높은 생산 계획을 수립할 수 있을 것으로 기대한다.

차량, 수송, 조선 등 많은 산업이 발전함에 따라 기계장치를 구성하고 있는 각종 재료의 특성 또한 날로 발전하고 있다. 과거 단순 강만 사용하여 기계를 설계하던 것과 달리 현재는 특수합금강과 복합재료를 사용하여 기계의 성능을 향상시키고 있다. 이처럼 많은 산업 분야에서 재료의 특성을 파악하여 적시 적소에 사용하여 기계를 설계하는 것은 기계설계자들에게 매우 중요한 과제가 되었다. 본 논문에서는 알루미늄 폼 복합재료로 된 TDCB(이중외팔보) 시험편의 파괴 거동을 시뮬레이션 해석과 실험 검증하였다. 실험과 해석에 사용된 모델은 영국 공업규격과 ISO국제규격에 의거한 3D 형태로 하였다. θ=12°일 때의 해석 결과로 한쪽 Beam이 일정한 속도로 이동하면서 접착력에 대한 반력이 발생하는데 Beam이 약 5mm 이동하였을 때 약 270N의 최대 반력이 나타나는 것을 볼 수 있다. 본 연구에서는 실험과 유한요소법을 통한 비교분석으로 물성데이터를 확보하고, 실험결과와 해석결과의 유사성을 검증하여 보다 쉽고 빠른 소재의 특성을 파악하는 방법을 검증해 보았다.

Britsh StandardBS 7991)에 명시된 DCB 시험편을 본 연구에 맞게 수정 후 두께 25mm, 35mm, 45mm, 55mm, 그리고 65mm의 DCB시험편을 제작하였다. 이 후 시험편을 Single-lap 방식으로 접착한 후 정적실험에서 도출된 최대 전단력을 각 시험편에 10Hz로 피로하중을 가하였다. 실험 결과값에 대한 수치해석적 검증을 하고자 상용 해석 프로그램인 ANSYS를 통해 실험과 동일한 시험편과 조건 하에 해석을 수행하였다. 접착력 해석을 하기 위해서 Mesh의 절점(node)들의 관계가 매우 중요하기 때문에 접착된 부분의 모든 절점들은 동일 선상에 있게 Mesh를 형성하였다. 실험 결과와 해석 결과를 비교해 본 결과 피로하중이 약 200cycle 반복되었을 때 최대 등가응력이 발생 하였고, 이때 전단방향으로 변위가 약 11mm 진전 된 것을 볼 수 있었다. 이후 4000cycle가량 피로하중이 반복 될 동안 변위는 일정하게 점점 증가한 후 피로하중이 약 4800cycle 반복 되었을 때 실험과 해석 데이터 모두 접착계면에서 완전한 전단 파괴가 일어난 것을 볼 수 있었다. 이때 변위는 약 20mm 진행 되었다. 해석을 통해 실험 데이터를 검증해 본 결과 두 결과 값은 완전 하게 같지는 않지만 유한요소법 해석 결과에 대한 신뢰를 확보 할 수 있었다. 이는 실제 구조물에 실험 없이 간단한 재료 물성치만으로도 해석을 통하여 구조적 안전성을 알아 볼 수 있는 한 방법이 될 수 있을 것이라고 사료된다.

The purpose of this study was to investigate the performance of hollow reinforced concrete bridge column systems with reinforcement details for material quantity reduction. The proposed reinforcement details have economic feasibility and rationality and make construction periods shorter. A model of hollow reinforced concrete bridge columns was tested under a constant axial load and a quasi-static cyclically reversed horizontal load. As a result, proposed reinforcement details for material quantity reduction were equal to existing reinforcement details in terms of required performance. The companion paper presents the experimental and analytical study for the performance assessment of hollow reinforced concrete bridge column systems with reinforcement details for material quantity reduction.

In order to verify the reliability of numerical site response analysis program, both soil free-field and base rock input motions should be provided. Beside the field earthquake motion records, the most effective testing method for obtaining the above motions is the dynamic geotechnical centrifuge test. However, need is to verify if the motion recorded at the base of the soil model container in the centrifuge facility is the true base rock input motion or not. In this paper, the appropriate input motion measurement method for the verification of seismic response analysis is examined by dynamic geotechnical centrifuge test and using three-dimensional finite difference analysis results. From the results, it appears that the ESB (equivalent shear beam) model container distorts downward the propagating wave with larger magnitude of centrifugal acceleration and base rock input motion. Thus, the distortion makes the measurement of the base rock outcrop motion difficult which is essential for extracting the base rock incident motion. However, the base rock outcrop motion generated by using deconvolution method is free from the distortion effect of centrifugal acceleration.

Recently, self-propagating high-temperature synthesis (SHS), related to metallic and ceramic powder inter- actions, has attracted huge interest from more and more researchers, because it can provide an attractive, energy-efficient approach to the synthesis of simple and complex materials. The adiabatic temperature Tad and apparent activation energy analysis of different thermit systems plays an important role in thermodynamic studies on combustion synthesis. After establishing and verifying a mathematic calculation program for predicting adiabatic temperatures, based on the thermo- dynamic theory of combustion synthesis systems, the adiabatic temperatures of the NiO/Al aluminothermic system dur- ing self-propagating high-temperature synthesis were investigated. The effect of a diluting agent additive fraction on combustion velocity was studied. According to the simulation and experimental results, the apparent activation energy was estimated using the Arrhenius diagram of ln(v/Tad)~1/Tad based on the combustion equation given by Merzhanov et al. When the temperature exceeds the boiling point of aluminum (2,790 K), the apparent activation energy of the NiO/ Al aluminothermic system is 64 ± 14 kJ/mol. In contrast, below 2,790 K, the apparent activation energy is 189 ± 15 kJ/ mol. The process of combustion contributed to the mass-transference of aluminum reactant of the burning compacts. The reliability of the simulation results was experimentally verified.

Tapered double cantilever beam (TDCB) specimens are the most commonly used test configurations to measure the fracture toughness of composites and adhesive joints. The material used in this study is aluminum alloy. For the impact analysis, load and displacement applied from pin onto end block as well as the crack energy release rate are calculated and compared with the finite element analysis results. The energy release rate increases with the velocity increases. As TDCB model with the same condition as experiment is simulated and analyzed, the fracture behavior can be estimated with the analysis result similar to experiment. The simulation results can be agreed with experimental graph and all experimental data at this study can be verified. These experimental results can be applied into real field effectively. It is found that the energy release rates measured from impact tests on the specimens can be predicted by the finite element model suggested in this study.