A ball-shape alumina arc-tube for low-wattage lamp was developed by the PIM process. An ultra high purity translucentgrade alumina powder was used. In injection molding process, a hot-runner type mold was developed. The translucent-grade alumina powder was extremely sensitive to contamination so that the injection molding condition and atmosphere control in the furnace should be taken care of with extreme caution. Contamination sources were pinpointed with EPMA. The arc-tube was molded in half and two halves were bonded in the middle by a new bonding technique at room temperature developed in this study.

This study aims to identify and analyze the factors that influenced the construction of London Eye which was led by private groups, including characteristics in progress, differentiated value in design, the combination of technology and design, and construction costs. The results of this study were the followings. 1) London Eye provides a new construction method for a landmark in the downtown in that the architects became the clients of the project which might have been hoarded, procuring the construction costs and completing it by themselves. 2) London Eye presents a space utilization method where undeveloped spaces in the downtown are used in three-dimensions by erecting a structure on the river with a minimum land. 3) The process of design, production and erection is propelled the realization of technical intention design with one system and from at the initial stage, the participation of the engineer where the designer is equal with you must accompany. 4) London Eye is endowed with strong shape by a circle in design concept, which is the simplest geometrical figure, and it provides organic relationship between the past and the present by utilizing historical elements in various ways. 5) The construction was completed through four phases including idea phase, promotion phase, turn-key contract phase, and design-build phase. The most critical factor to the success is derived from the direct contact with Involved companies from the production phase. 6) In a project facing many challenges in terms of technology, the design-build method proves to be a more effective method than turn-key contract in that it may more allocate risks and enable coherent implementation of the core concept in design. The organization for the design-build method was composed of three phases including general affairs, responsible contracting by sector, and cooperative system by sector. Since that was a new concept structure, high-level contractors who hadn't had existing cooperative relationships with one another formed new cooperative relationship, while collaborating companies who had long cooperated led the responsible contracting and sub-cooperative system, which resulted in reduction of risks and time. 7) The major factors to change design were the design characteristics, derived from a technically great combination, and the opening time. 8) A new erection method was applied to London Eye, a structure that overcame the limitation in land and period, and the process of installation demonstrated that it is an important value for the construction of a landmark in the city. 9) In spite of many visitors and tremendous operational income, the factors that London Eye fails to free itself from debts include the construction costs expended double than expected, and interest burden to the investments, which occurred in the course of procuring the costs. Absolute limit in time increased the construction costs, resulting in being a great obstacle in the course of operation.

  The package loading process of the lumbering industry is an operation that after a pair of workers binds three or six lumber into a unit and cut the both ends of the lumber, carry and pack and load the weight cargo of 30-50㎏. The package loading process

  The risk management is an organized method for identifying and measuring risk and for selecting, developing, and implementing options for the handling of risk. The risk management covers all programatic and technical factors which affect the system deve

  Many producers put sampling inspection policy into the way of their convenience. Examples of the convenience are irregular lot size and too small sample size. Because they don"t use a standard sampling inspection policy, they can not guarantee the quali

Recently, a couple of process capability indices are used to evaluate that the outputs of the process satisfy the specifications. An assumption of those indices is that the specifications of the characteristics are given single constant value. The display

이 연구의 목적은 서울대학교 백운산연습림 낙엽활엽수림에서 벌채 후 주연부 식생 변화를 모니터링 하는 것이다. 벌채 후 8년,10년이 경과한 시점 인 4차 조사(2001년)와 5차 조사(2003년) 결과에서 주연부식생의 변화는 다음과 같다. 시간이 경과함에 따라산림주연부에서 경쟁력 이 우수한수종은 비목나무, 병꽃나무,조록싸리, 생강나무,두릅나무 등이 었고,산림주연부와 인접한조사구에서 경쟁력이 우수한수종은 비목나무, 병꽃나무,고추나무 등이 었다. 벌채지 산림내부에서 경쟁력 이 우수한수종은 비목나무,생강나무 등으로 나타났다. 산림주연부에서 높은 경쟁력을 갖는 수종은 방위,광량, 고도, 기존 특정종의 성장에 따라 차이가 있었으나 양사면에서 높은 경쟁력을 갖는 수종은 비목나무와 병꽃나무이 었다. 조릿대는산림 벌채 후 초기 에 왕성한 생장력을 보였으나 시간이 경과함에 따라수관층이 형성되면서 감소세를 보였으며, 피복율은 남서향 사면보다 북동향 사면에서 우세하게 출현하였다. 조사기간별 유사도지수는 벌채시 산림주연부에서 산림내부로 거 리가 멀어질수록 낮아지는 경향을 나타냈다.

이 연구에서는 낙도보조항로의 운영실태와 발달과정에 대하여 정리하였다. 낙도보조항로는 14개 사업자가 U개 항로에서 총 30척 선박으로 낙도주민을 위한 안정적인 생활교통편의를 제공하고 있다. 항로별 수송실적을 분석한 결과, 낙도보조 항로를 이용하는 여객 수가 매년 증가하고 있다. 선박 이용자의 서비스 만족도를 향상시키기 위해서 운영사업체별로 경영평가제를 도입하는 등 보다 구조적인 변화가 요구된다. 이 연구의 결과들은 낙도보조항로 중장기 발전방향 수립에 기초 자료로 활용하는 데 그 의미가 있다.

Isotopes of alkali and alkaline earth metals (AM and AEM) are the main contributors to the heat load and the radiotoxicity of spent fuel (SF) . These components are separated from the SF and dissolved in a molten LiCl in an electrolytic reduction process. A mass transfer model is developed to describe the diffusion behavior of Cs, Sr, and Ba in the SF into the molten salt. The model is an analytical solution of Fick's second law of diffusion for a cylinder which is the shape of a cathode in the electrolytic reduction process. And the model is also applied to depict the concentration profile of the oxygen ion which is produced by the electrolysis of LiO. The regressed diffusion coefficients of the model correlating the experimentally measured data are evaluated to be greater in the order of Ba, Cs, and Sr for the metal ions and the diffusion of the oxygen ion is slower than the metal ions which implies that different mechanisms govern the diffusion of the metal ions and the oxygen ions in a molten LiCl.

Process control and autonomous safety control by applying PSM(Process Safety Management) method using AHP(Analytic Hierarchy Process) and to development of PSIM(Process Safety Information Management) evaluation method in the construction. The reason why PSIM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries, thereby strengthening their competitive edges.

낙엽활엽수림 개벌 후 벌채지에서 주연부 식생구조 발달과정을 규명하기 위하여 서울대학교 농업생명과학대학 부속 남부연습림 내 백운산지 역 제26임반 벌채적지를 대상지로 선정하였다. 1994년에 두 개의 모니터링 조사구를 설치하였고, 1994년, 1997년, 1999년에 식생조사를 실시하였다. 벌채 후 6년간 주연부식생 변화는 다음과 같다. 시간이 경과함에 따라 산림주연부에서 경쟁력이 우수한 수종은 병꽃나무, 비목나무, 국수나무, 산초나무 등이었고, 산림주연부와 인접한 조사구에서 경쟁력이 우수한 수종은 고추나무, 비목나무, 덜꿩나무 등이었으며, 벌채지 산림내부에서 경쟁력이 우수한 수종은 병꽃나무, 비목나무, 생강나무등으로 나타났다. 두개의 모니터링 조사구에서 주연부 천이단 계상 우세종은 방위와 국지저 위치, 기존 우점수종에 따라 차이를 나타내었다. 벌채 후 경과년도에 따라 각 벌채지 산림 주연부에서 벌채지 산림내부로 거리가 멀어질수록 유사도지수도 낮아지는 경향을 나타내었고, 종다양도지수, 종수, 개체수 및 수관피도는 벌채지 산림주연부에서 벌채지 산림내부로 갈수록 감소하였다.

It is difficult to put it into practice in that it requires bearing too much burden to draw out the planning itself in a case of large construction work. Consequently in this paper we select evaluation criteria by construction progress, classify into several categories, and regard potential danger which often occurs, as a evaluation criterion. Further step is to allow workers or collaborated companies to express their expert opinions or experiences and to encourage quality and process control and autonomous safety control by applying PSM(Process Safety Management) method using AHP(Analytic Hierarchy Process) and to development of PSIM(Process Safety Information Management) evaluation method in the construction. The reason why PSIM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries, thereby strengthening their competitive edges.

A multi axis whetstone polishing system, which uses the flow system of the stone polishing machine head, has been developed. The test results show that the defect by line contact polishing does not occur in both ends of the stone and that it came to trim smoothly. In terms of the surface roughness, the corresponding index was decreased by 3.6 times, improving the polishing effect greatly. It decreased significantly the dust and noise with the wet polishing. The factors of the duty evasion at production site can thus be solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

ABC analysis is the process of dividing inventory items into three classes according to their monetary usage so that managers can focus on Items that have the highest monetary usage value, and has been widely used in practice since Its development in 1950

It used the flow system of the stone polishing machine head and it developed a multi axis whetstone polishing system. With the result, the defect by line contact polishing does not occur in both ends of the stone, and it came to trim smoothly. As the index of the surface roughness decreased to 3.6 times, the polishing effect improved greatly. It decreased greatly the dust and a noise with the wet polishing, and the factors of the duty evasion at production site were solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

Crack generation during die compaction and distortion during sintering have been critical problems for the conventional pressing and sintering process. Until now, trial and error approach with engineers' industrial experiences has been only solution to protect the crack generation and distortion. However, with complexity in shape and process it is very difficult to design process conditions without CAE analysis. We developed the exclusive CAE software (PMsolver/Compaction) for die compaction process. The accuracy of PMsolver is verified by comparing the finite element simulation results with experimental results. The simplified procedures to find material properties are proposed and verified with iron based powder and tungsten carbide powder. Based on the accurate simulation result by PMsolver, the optimal process conditions are designed to get uniform density distribution in a powder compact after die compaction process by using a derivative based optimization scheme. In addition, the effect of non-uniform density distribution in a powder compact on distortion during sintering is shown in case of the fabrication of tungsten carbide insert.

The Systems Engineering, as a methodology for engineering and management of today's ever-growing complex system, is a comprehensive and iterative problem-solving process. The process centers on the analysis and management of the stakeholders' needs throug