Photosynthesis and respiration of seagrasses are mainly controlled by water temperature. In this study, the photosynthetic physiology and respiratory changes of the Asian surfgrass Phyllospadix japonicus, which is mainly distributed on the eastern and southern coasts of Korea, were investigated in response to changing water temperature (5, 10, 15, 20, 25, and 30°C) by conducting mesocosm experiments. Photosynthetic parameters (maximum photosynthetic rate, Pmax; compensation irradiance, Ic; and saturation irradiance, Ik) and respiration rate of surfgrass increased with rising water temperature, whereas photosynthetic efficiency (α) was fairly constant among the water temperature conditions. The Pmax and Ik dramatically decreased under the highest water temperature condition (30°C), whereas the Ic and respiration rate increased continuously with the increasing water temperature. Ratios of maximum photosynthetic rates to respiration rates (Pmax : R ) were highest at 5°C and declined markedly at higher temperatures with the lowest ratio at 30°C. The minimum requirement of Hsat (the daily period of irradiancesaturated photosynthesis) of P. japonicus was 2.5 hours at 5°C and 10.6 hours at 30°C for the positive carbon balance. Because longer Hsat was required for the positive carbon balance of P. japonicus under the increased water temperature, the rising water temperature should have negatively affected the growth, distribution, and survival of P. japonicus on the coast of Korea. Since the temperature in the temperate coastal waters is rising gradually due to global warming, the results of this study could provide insights into surfgrass responses to future severe sea warming and light attenuation.

In crustaceans, molting is regulated by interactions between ecdysteroid and juvenile hormone (JH) signaling pathway-related genes. Unlike the ecdysteroid signaling pathway, little information on the role of JH signaling pathway-related genes in molting is available in zooplanktonic crustaceans. In this study, three genes (juvenile hormone acid O-methyltransferase (JHAMT ), methoprene-tolerant (Met ), and juvenile hormone epoxide hydrolase (JHEH )) which are involved in the synthesis, receptor-binding, and degradation of JH were identified using sequence and phylogenetic analysis in the brackish water flea, Diaphanosoma celebensis. Transcriptional changes in these genes during the molting cycle in D. celebensis were analyzed. Sequence and phylogenetic analysis revealed that these putative proteins may be functionally conserved along with those of insects and other crustaceans. In addition, the expression of the three genes was correlated with the molting cycle of D. celebensis, indicating that these genes may be involved in the synthesis and degradation of JH, resulting in normal molting. This study will provide information for a better understanding of the role of JH signaling pathwayrelated genes during the molting process in Cladocera.

An estuary is a water ecosystem with a high abundance of the species diversity, due to a variety of complex physicochemical factors of the area where freshwater and ocean mixed. The identification of Corbicula species in the estuary environments is difficult because of various morphological characteristics. In this study, we provide taxonomic information on Corbicula species with taxonomic difficulties using morphological and genetic analysis. This study was conducted on clams from the Seomjin River-Gwangyang Bay, one of the major production area of marsh clam in Korea. As a result, we characterized Cytocrome C Oxidase subunit I (COI) sequences of the Corbicula. The 636 bp nucleotide sequences of COI have 98% homology among Corbicula species collected from 2 sites of Seomjin River-Gwangyang Bay. The phylogenetic analysis with 17 species of Corbicula indicated that most of the species collected from Seomjin River-Gwangyang Bay were brackish water clam (Corbicula japonica), and only one Asian clam (Corbicula fluminea). The evolutionary distance between C. japonica and C. fluminea was less than 0.003. Therefore, it was confirmed that C. japonica is phylogenetically closely related to C. fluminea. In 9 species of Cyrenidae, phylogenetic tree was classified into three lineages. These results will be used as an important data for an identification of clam species by providing genetic information for Corbicula species with a morphological diversity. Key words: Corbicula japonica, cytochrome c oxidase subunit I (

The macroinvertebrate community in the Singal reservoir, Yedang and Juam lake was investigated three times from April 2021 to October 2021. Each lake was investigated by dividing it into inflow, middleflow, and outflow. Additionally, sampling was conducted again by dividing it into the edge and center parts at each inflow, middle-flow, and outflow. Eight families of benthic macroinvertebrates were collected except for chironomids in the sampling sites. Dominant macroinvertebrates were investigated as chironomids, and Tubificidae was sub-dominant organisms. The density of macroinvertebrate community was higher in the edge area than in the center bottom of the lakes. The density of chironomids was low when the water level was high but was high when the water level was low. In the edge area of the middle-flow in Singal reservoir, the density of chironomids was 1,208 ind. m-2 in April when the water level was high, but it increased to 1,401 ind. m-2 in July when the water level was low. Similarly, the density of chironomids at the outflow of Yedang lake was high (1,990 ind. m-2) in July when the water level was low. The density of chironomids also decreased along with the increasing water level at all edge areas of Juam lake. These results indicated that it will be necessary to consider the water level when studying macroinvertebrate communities in the lake.

높아진 생활수준과 주 5일 근무의 정착으로 여가시간이 증가했고, 이에 따라 물을 이용한 공간 에 대한 관심도 크게 증가하였다. 하지만 급격한 양적 성장이 이루어짐에 따라 물놀이 공간은 대부분 획일화된 시설물과 배치로 조성되어 있으며, 다양한 행태에 대한 지원 또한 미흡한 실정이다. 이에 본 연구에서는 빅데이터를 활용한 실증 데이터를 바탕으로 물놀이 공간 및 시설 물의 이용행태를 분석하고자 하였다. 그 결과, 각 물놀이 시설물이 서로 다른 놀이를 지원하며, 각각 유발되는 놀이의 형태나 이용행태가 상이하다는 결론을 도출하였다. 이에 본 연구는 앞으 로 물놀이 공간 조성 시, 물리적 환경과 이용자 간의 관계를 고려하여 설계할 수 있도록 기본자 료를 제시하고자 하였다.

우리나라의 수산 양식의 대부분이 이루어지는 연안과 내만에 최근 빈번한 고수온 현상으로 매년 막대한 양식 피해가 발생하고 있다. 2018년~2021년의 최근 4년간의 7월은 이례적인 고수온, 장마, 태풍 등에 의해 1990년 이후 수온의 연별 변동성이 1994년~1997년에 이 어 두 번째로 크게 나타났다. 동·서·남해의 대표적인 고수온 양식피해 우심해역(천수만, 가막만, 구룡포)에 대한 열속과 열수지 분석을 통 해 여름철 천수만과 가막만의 고수온 발생은 주로 대기로부터 해수면을 통한 열유입에 의한 것임을 확인하였다. 벌크식으로 계산한 순열 속과 수온변화로부터 계산한 해양 열 저장률로부터 4년간(2018년~2021년)의 7월 평균 해양 열 수송률을 추산한 결과, 서산 창리는 순열속 의 13.5 %, 여수 신월은 순열속의 62.3 %가 외부로 유출되는 것으로 계산되었다, 구룡포 하정은 순열속의 22.2 %가 평균적으로 외부로 유출 되는 것으로 평가되었으나, 냉수대 발생 유무에 따라 연도별로 해양 열 수송률이 순열속의 -174.5 %에서 132.5 %까지 큰 차이를 보였다.

In this study, using the developed pilot device, an experiment was conducted with groundwater according to the calcium carbonate concentration and silica concentration for a certain period of time to determine the degree of RO membrane contamination according to water quality. In addition, using wastewater with severe fouling of raw water, the treatment efficiency is compared through an experiment with a pilot device, the operation progress is evaluated for the scale effect, and the stability and convenience of the developed product are considered.

본 연구에서는 하수 재이용을 위한 역삼투막 공정에서 전처리 정밀여과막(MF) 손상에 대한 누출되는 다양한 수 질변화로써 막 손상 검지 방안을 제시하였다. 이를 위하여 역삼투막 유입수질 적합성 평가지표인 SDI (silt density index)를 3에서 5의 범위 내에서 막 손상 시 검지 감도를 정량화하기 위하여 전처리 분리막이 1에서 3가닥 파단에 따라 SDI는 1.92에 서 6.11까지 증가한 결과를 확인할 수 있었다. 일반적으로 3을 기준으로 역삼투막 유입수질로 설정하였을 때 분리막이 3가닥 까지 파단이 되어야만 막 손상 검지가 가능하다는 것을 의미하며 역삼투막의 오염은 잠재적으로 가속화되어 효율을 저하시 킬 수 있다. 또한 이때 누출되는 입자성과 유기물질에 대하여 0.45 μm 이상의 크기만 걸러주는 입자계수는 입도분포별 막 파 단 개수에 따라 일정한 패턴을 확인할 수 없었으며, TOC 농도는 약 2배의 변화패턴으로써 SDI와의 상관관계로써 TOC가 막 손상 수질지표로써 신뢰성이 높은 것으로 확인되었다. 수질분석결과와 더불어 USEPA에서 제시하는 막 손상 검지 방법 중 압력손실시험과 이를 기반으로 LRVDIT 모델의 적합성 평가를 한 결과 막 손상 또는 역삼투막 공정으로 유입되는 막오염물질 을 신속하게 확인할 수 있는 SDI 및 TOC를 포함한 LRVDIT 모니터링과 UCL 설정을 병행해야 한다.

본 연구에서는 병원균인 Bacillus cereus, Staphylococcus aureus, Salmonella Typhimurium 그리고 Escherichia coli O157:H7을 이산화염소수와 전해수에 0분, 2분, 4분, 6분, 8분 및 10분간 반응시켜 이산화염소수와 전해수의 살균 효과를 확인하고, 그람 양성균(B. cereus, S. aureus)과 그 람 음성균(S. Typhimurium, E. coli O157:H7)의 민감성 비 교를 실시하였다. B. cereus, S. aureus, S. Typhimurium 그 리고 E. coli O157:H7의 이산화염소수에서의 D값은 1.85±0.64, 2.06±0.85, 2.26±0.89 그리고 2.59±0.40분으로 나 타났고 전해수의 경우 각각 2.13±0.32, 1.64±0.64, 1.71±0.32 그리고 1.86±0.36분으로 나타났다. 각 용액에 처리한 10분 간 모든 균주에서 꾸준한 감소 추세를 나타내었으며 각 용액에서 각 균주의 D값은 서로 유의적인 차이는 보이지 않았다 (P>0.05). 이산화염소수와 전해수의 살균력을 비교 한 결과 D값은 유의적인 차이가 나타나지 않았으나, pH 와 유효염소농도 모두 이산화염소가 전해수보다 낮은 값 을 보였다. 살균·소독을 실시할 대상의 pH에 대한 민감성 과 같은 특성을 고려하여 최적의 살균제를 선택하고, 최 적의 농도를 결정하여 식품 산업에 적용하기 위한 자료로 활용될 것으로 기대된다.

This study has been conducted to investigate the North Korea water supply system. For this purpose, laws and regulations concerning the North Korea water utilities were analyzed. According to this study, the water supply system of North Korea is similar to that of South Korea. The major difference between these two systems lies in the national water supplier: South Korea has the national water supplier as well as the municipal suppliers, while there is no national water supplier in North Korea. It is noted that the North Korean water utilities depend on outside suppliers for resources necessary for water production such as electricity, chemicals, spare parts, etc. This could damage the North Korean water utilities. If required resources were not delivered properly (deficient quantity and/or at delayed timing), the water suppliers would encounter difficulties in water production.

Most of the drinking water dams managed by the local governments in Korea are earthfill dams, and these dams have almost no geotechnical property information necessary for seismic performance evaluation. Nevertheless, in the rough planning stage for improving seismic safety for these dams, it is necessary to classify their relative seismic hazard against earthquakes and conduct an additional ground investigation. The zero seismic failure probability curve is a curve suggested in this study in which the probability of failure due to an earthquake becomes ‘0’ regardless of the geotechnical properties of the earthfill dam. By examining the method and procedure for calculating failure probability due to an earthquake suggested in previous researches, the zero seismic failure probability curves for an earthquake in 1,000-year and 2,400-year return periods in Korea were presented in the form of a hyperbola on the plane of the dam height versus freeboard ratio (ratio of freeboard to dam height), respectively. The distribution characteristics of the dam height and the freeboard ratio of 81 Korean earthfill dams were presented. The two proposed zero seismic failure probability curves are shown on the plane of the dam height versus freeboard ratio, and the relative seismic hazard of 81 dams can be classified into three groups using these curves as boundaries. This study presented the method of classifying the relative seismic hazard and the classification result.

The presence of dyes in water is the most popular problem recently, so the current study was directed towards the synthesis of an effective material consisting of NiO and MWCNTs. The NiO/F-MWCNTs nanocomposite was synthesized using a simple hydrothermal method after functionalization of MWCNTs using sulfuric acid and nitric acid and utilized as an efficient surface to adsorption of malachite green dye from polluted water. The nanocomposite sample was characterized using several techniques are X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA), Field emission scanning electron microscopy (FESEM), High- resolution transmission electron microscopy (HRTEM), Brunauer–Emmett–Teller (BET) surface area analysis, Barrett-Joyner-Halenda (BJH) analysis and Energy dispersive X-ray (EDX). The analytical results showed that the prepared nanocomposite is of good crystalline nature with a particle size of 25.43 nm. A significant specific surface area was 412.08 m2/ g which indicates the effective impact of the nanocomposite in the adsorption of malachite green (MG) dye. On the other hand, the effect of adsorbent dose, temperature, acidic function and contact time on the adsorption efficiency of dye was studied. The kinetics of dye adsorption were also investigated employing two kinetic models, pseudo-first-order model and pseudo-second-order model. Finally, the thermodynamic functions were determined to identify the type of the reaction and the spontaneity of the process.

The hybridization of graphene with magnetic nanoparticles has endowed graphene with increasing interest as the adsorbent for wastewater treatment. However, its fabrication often involves a multi-stepped chemical synthesis process. In this work, we demonstrate a facile, one-step, and solvent-free approach to fabricate Fe3O4 nanoparticle-anchored Laser-Induced Graphene ( Fe3O4@LIG) as an efficient adsorbent by direct laser irradiation on a ferric acetylacetonate containing polybenzoxazine film. Raman and X-ray diffraction analysis confirm the graphene component in the adsorbent, and the morphology characterizations show that Fe3O4 nanoparticles are distributed uniformly on LIG with hierarchical meso- and macro-porous structures. Adsorption experiments indicate that Fe3O4@ LIG can adsorb methylene blue (MB) from aqueous solutions in a fast and effective manner, with a maximum adsorption capacity up to 350.9 mg/g. The adsorption kinetics and isotherms are also investigated, which are well-described by the pseudo-second-order model and Langmuir model, respectively. Additionally, Fe3O4@ LIG is also demonstrated with the efficient removal of a variety of organic solvents from water. The favorable adsorption behavior of Fe3O4@ LIG is attributed to its unique porous structure and the molecular interactions with adsorbates. On the other hand, Fe3O4@ LIG has high magnetic property, and therefore, it could be easily recovered from water and well regenerated for repeated use. With the efficient adsorption of organic pollutants, magnetic separability, and good

A compacted bentonite buffer is a major component of engineered barrier systems, which are designed for the disposal of high-level radioactive waste. In most countries, the target temperature required to maintain safe functioning is below 100°C. If the target temperature of the compacted bentonite buffer can be increased above 100°C, the disposal area can be dramatically reduced. To increase the target temperature of the buffer, it is necessary to investigate its properties at temperatures above 100°C. Although some studies have investigated thermal-hydraulic properties above 100°C, few have evaluated the water suction of compacted bentonite. This study addresses that knowledge gap by evaluating the water suction variation for compacted Korean bentonite in the 25–150°C range, with initial saturations of 0 and 0.22 under constant saturation conditions. We found that water suction decreased by 5–20% for a temperature increase of 100–150°C.

For this study, we established a system for the CPU cooling performance evaluation and conducted performance tests on air-cooling and water-cooling to understand the effect of the CPU cooling method on performance. For the performance evaluation, the test chamber and water-cooling system were set up, the workload S/W was selected, and a case file was created. In the case of the air-cooling, the CPU temperature is sensitively affected by the outside air temperature, the direction of the board installation, and the influence of the airflow formed around it, and may cause a lot of fluctuations in the CPU temperature. When the water-cooling system was applied, the CPU temperature decreased from 75℃℃ to 37℃ compared to the air-cooled type under the test conditions of 28.5℃ and 3LPM cooling water supply temperature and flow rate. As the CPU clock speed increased due to the decrease in temperature, it was found that the job execution time was reduced by 15~23%. In the future, it is expected that using this performance evaluation environment established through this study will enable us to easily conduct test evaluations for various processors, cooling methods, and changes in operating conditions.

Benthic macroinvertebrates are important ecological and environmental indicators as primary or secondary consumers, and therefore are widely used in the evaluation of aquatic environments. However, there are no comprehensive river ecosystem monitoring surveys that link the major physicochemical water quality items with benthic macroinvertebrates in urban streams. Therefore, this study investigated the distribution characteristics of benthic macroinvertebrates and physicochemical water quality items (17 items) in Yangjaecheon and Yeouicheon from 2019 to 2020. At the same time, by applying Spearman’s rank correlation analysis and nonmetric multidimensional scaling (nMDS) analysis in the water quality data and biotic index, we tried to provide basic data for diagnosing the current status of river ecosystems in major urban rivers in Seoul. Based on the study results, a total of 39 species and 3,787 individuals were identified in Yangjaecheon, the water quality (based on BOD, TOC, and TP) of Yangjaecheon was higher than Grade Ib (good), and the BMI using benthic macroinvertebrates appeared as Grade C (normal) at all the sites. In Yeouicheon, a total of 51 species and 4,199 individuals were identified, the water quality (based on BOD, TOC, TP) was higher than Grade Ib (good) similar to Yangjaecheon, and the BMI of both Upstream and Saewon bridge was Grade B (good), while Yeoui bridge was Grade C (normal). Overall, analysis results for the distribution of benthic macroinvertebrates by a nonmetric multidimensional scaling method showed no significant difference between the two streams (p=0.1491). Also, significant environmental variables related to benthic macroinvertebrates distribution were determined as water temperature and DO. On the other hand, the results of the correlation analysis between biotic index and major water quality items confirmed that R1 and BMI could be used for on-site urban river water quality evaluation.

Understanding the characteristics of reservoir water quality is fundamental in reservoir ecosystem management. The water quality of reservoirs is affected by various factors including hydro-morphology of reservoirs, land use/cover, and human activities in their catchments. In this study, we classified 83 major reservoirs in South Korea based on nine physicochemical factors (pH, dissolved oxygen, chemical oxygen demand, total suspended solid, total nitrogen, total phosphorus, total organic carbon, electric conductivity, and chlorophyll-a) measured for five years (2015~2019). Study reservoirs were classified into five main clusters through hierarchical cluster analysis. Each cluster reflected differences in the water quality of reservoirs as well as hydromorphological variables such as elevation, catchment area, full water level, and full storage. In particular, water quality condition was low at a low elevation with large reservoirs representing cluster I. In the comparison of eutrophication status in major reservoirs in South Korea using the Korean trophic state index, in some reservoirs including cluster IV composed of lagoons, the eutrophication was improved compared to 2004~2008. However, eutrophication status has been more impaired in most agricultural reservoirs in clusters I, III, and V than past. Therefore, more attention is needed to improve the water quality of these reservoirs.

The water consumption data of individual consumers must be analyzed and forecast to establish an effective water demand management plan. A k-mean cluster model that can monitor water use characteristics based on hourly water consumption data measured using automated meter reading devices and demographic factors is developed in this study. In addition, the quantification model that can estimate the daily water consumption is developed. K-mean cluster analysis based on the four clusters shows that the average silhouette coefficient is 0.63, also the silhouette coefficients of each cluster exceed 0.60, thereby verifying the high reliability of the cluster analysis. Furthermore, the clusters are clearly classified based on water usage and water usage patterns. The correlation coefficients of four quantification models for estimating water consumption exceed 0.74, confirming that the models can accurately simulate the investigated demographic data. The statistical significance of the models is considered reasonable, hence, they are applicable to the actual field. Because the use of automated smart water meters has become increasingly popular in recent year, water consumption has been metered remotely in many areas. The proposed methodology and the results obtained in this study are expected to facilitate improvements in the usability of smart water meters in the future.

Although airborne wear particles (AWPs) generated from wheel-rail contacts are the major source of particulate matter (PM) in subway systems, studies on reducing the generation of such particles in order to enhance air quality are extremely rare. Therefore, this study investigated the effect of applying water-lubricant (applying tap water) on improving air quality by reducing the mass concentration (MC) of AWPs from wheel-rail contacts at a train velocity of 73 km/h using a twin-disk rig. An optical particle sizer was used to measure the MC of particles with the diameter range of 0.3 μm~10 μm. The results showed that the generation trends regarding PM1, PM2.5, and PM10 were different for dry and water-lubricated conditions: all three PMs showed an increasing-decreasing trend with slip rate under dry conditions; however, they were almost constant with slip rate under water-lubricated conditions. The particle size distributions were also different for dry and water-lubricated conditions: the peak occurred in multi-modal with the largest peak at approximately 6 μm in diameter under dry conditions; whereas, the peak occurred in bi-modal with the largest peak at approximately 0.9 μm in diameter under water-lubricated conditions. In addition, MCs were mostly smaller under water-lubricated conditions than dry conditions except at approximately 0.9 μm in diameter. Applying water significantly decreased PM1~2.5 and PM2.5~10 by more than 95%. This caused a decrease in PM2.5 and PM10 by 48.1% and 78.5%, respectively. On the other hand, applying water increased PM0.3~1 (i.e., PM1) by 52.8%, possibly owing to the effect of water vapor and mineral crystals from tap water. Overall, these findings indicate that water-lubrication can improve air quality in subway systems by reducing the MC of APWs generated from wheel-rail contacts. This study may provide a reference for future studies seeking to improve air quality in subway systems by reducing AWPs generated from wheel-rail contacts by applying lubricants.