We have studied the efficient operation of the radar and the appropriateness of the installation location, when constructing the VTS system. As the Civil-Military Complex Harbour (Kangjeong Port) is completed in 2016, we set the control area within 10 nautical miles centering on Kangjeong Port, and found out and removed the operational radar blind area of VTS system to provide safe navigation information for vessels that navigating this area. Assuming that two international cruise ships entering at the same time, we performed the radar simulation and compared the images by considering the three sites of Kangjeong Port, Miaksan and Seoguipo Port. Simulation results for a single radar installed at Kangjung Port indicate that the blind area was largely affected by two large cruise ships and the surrounding islands. The blind area due to Kogunsan was considerably large when installed in Miaksan, but the blind area due to the influences of Beomseom, Moonseom and Seopseom was negligibly large. It seems that additional radar installation is necessary as a complementary solution to solve this blind area. When two radars were installed at Miaksan and Kangjeong Port, the residual blind area due to the Seopseom was 0.25 km2 at 0.1~0.33 nautical miles in the southeast direction from Seopseom. In addition, the remaining blind area with two cruise ships mutually influenced was 0.18 km2, which did not occur with a single cruise ship.

Sulfur copolymer (poly(S-r-CEA)) was synthesized via facile inverse vulcanization of elemental sulfur with 2-carboxyethyl acrylate (CEA). Polysulfide (PS) oligomer was soluble to common solvents including DMF, producing homogenous dope solution with PAN as filler. PS-PAN was electrospun resulting to nanofiber membrane effective for Hg2+ sequestration with recorded maximum capacity of 612 mg g-1 based on Langmuir model isotherm. Kinetics, selectivity and reusability were also evaluated. This work presents new and cheap yet effective material for heavy metal sequestration from contaminated water. This work was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning (2015R1A2A1A15055407) and by the Ministry of Education (No. 2009-0093816).

Seismic design of braced frames that simultaneously considers economic issues and structural performance represents a rather complicated engineering problem, and therefore, a systematic and well-established methodology is needed. This study proposes a multi-objective seismic design method for an inverted V-braced frame with suspended zipper struts that uses the non-dominated sorting genetic algorithm-II(NSGA-II). The structural weight and the maximum inter-story drift ratio as the objective functions are simultaneously minimized to optimize the cost and seismic performance of the structure. To investigate which of strength- and performance-based design criteria for braced frames is the critical design condition, the constraint conditions on the two design methods are simultaneously considered (i.e. the constraint conditions based on the strength and plastic deformation of members). The linear static analysis method and the nonlinear static analysis method are adopted to check the strength- and plastic deformation-based design constraints, respectively. The proposed optimal method are applied to three- and six-story steel frame examples, and the solutions improved for the considered objective functions were found.

In this study, recrystallization behaviors in the two-phase (α+γ) region of micro-alloyed steels such as Base, Nb, TiNbV and CAlN were investigated in terms of flow stress, microstructure and associated grain boundary characteristics. The flow stress of all specimens reached peak stress and gradually decreased, which means that recrystallization or recovery of proeutectoid deformed ferrite and recovery or transformation to ferrite of deformed austenite occurred by thermal activation. The precipitation of carbide or nitride via the addition of micro-alloying elements, because it reduced prior austenite grain size upon austenitization, promoted transformation of austenite to ferrite and increased flow stress. The strain-induced precipitation under deformation in the two-phase region, on the other hand, increased the flow stress when the micro-alloying elements were dissolved during austenitization. The recrystallization of the Nb specimen was more effectively retarded than that of the TiNbV specimen during deformation in the two-phase region.

The feeding habits of yellowfin goby (Acanthogobius flavimanus) were studied based on the examination of stomach contents of 171 specimens collected from September 2013 to August 2014 in the tidal flat of Sangnae-ri, Suncheon, Korea. The size of A. flavimanus ranged from 10.6 to 18.3 cm in standard length (SL). A. flavimanus mainly consumed amphipods (especially Corophium sp.). Its diet also included shrimps, crabs, fishes and polychaetes. Ontogenetic changes in diet composition of A. flavimanus were evident. The portion of amphipods and polychaetes was inversely proprotional to the increase in fish size whereas it was directly proportional to the increase in the consumption of shrimps and crabs increased.

Novel processable sulfur copolymer (poly(S-r-CEA)) was synthesized via facile inverse vulcanization of elemental sulfur with 2-carboxyethyl acrylate (CEA). This polysulfide was electrospun producing sulfur-rich nanofiber and tested for heavy metal sequestration. Adsorption experiments show very high and efficient Hg2+ adsorption. This work extends the novelty of inverse vulcanization chemistry by developing method for preparation of material based on inverse vulcanized polysulfide. Consequently, a new and cheap yet effective material was prepared for heavy metal sequestration from contaminated water. This work was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning (2015R1A2A1A15055407) and by the Ministry of Education (No. 2009-0093816).

We investigate the records related to the reign style and the calendar day from the epigraphs of the Goryeo dynasty (918 - 1392) in Korea in order to verify and supplement the sexagenary cycle data of the first day in the lunar month of the dynasty. The database of the National Research Institute of Culture Heritage contains a rubbed-copy image, transcription statement, and translation statement for Korean epigraphs as well as 775 epigraphs corresponding to the Goryeo dynasty. The epigraph records are valuable in that, during this time, they were written differently from other historical literature such as the Goryeosa (History of the Goryeo Dynasty), which was compiled in the next dynasty. We find that the Goryeo dynasty, in general, had adopted the reign styles of Chinese dynasties at that time. We also find 159 calendar day records all showing good agreement with the work of Ahn et al. except for dozens of records. Through this study, we can verify the reign styles and the calendar days of the Goryeo dynasty.

Permanent deformation plays a key role in performance based earthquake resistant design. In order to estimate permanent deformation after earthquake, it is essential to secure reliable response history analysis(RHA) as well as earthquake scenario. This study focuses on permanent deformation of an inverted T-type wall under earthquake. The study is composed of two separate parts. The first one is on the verification of RHA and the second one is on an effect of input earthquake motion. The former is discussed in companion paper and the latter in this paper. In order to investigate the effect of an input earthquake motion on the permanent deformation, three bins of spectral matched real earthquake records with different magnitude, regions, epicentral distance are constructed. Parametric study was performed using the verified RHA through the companion paper for each earthquake records in the bins. The most influential parameter affecting permanent displacement is magnitude. The other parameters describing earthquake motion are not significant enough to increase permanent displacement of the inverted T-type wall except for energy related parameters(AI, CI, SEI).

Permanent deformation plays a key role in performance based earthquake resistant design. In order to estimate permanent deformation after earthquake, it is essential to secure reliable response history analysis(RHA) as well as earthquake scenario. This study focuses on permanent deformation of an inverted T-type wall under earthquake. The study is composed of two separate parts. The first one is on the verification of RHA and the second one is on an effect of input earthquake motion. The former is discussed in this paper and the latter in the companion paper. The verification is conducted via geotechnical dynamic centrifuge test in prototype scale. Response of wall stem, ground motions behind the wall obtained from RHA matched pretty well with physical test performed under centrifugal acceleration of 50g. The rigorously verified RHA is used for parametric study to investigate an effect of input earthquake motion selection in the companion paper.

The deep see riser is often exposed to harsh ocean environment which may cause riser failure. If the riser fails, it may cause serious economical losses as well as environmental problems. Thus, monitoring the integrity of the rider for preventing sudden failure is very important. In this study, the structural behavior monitoring systems installed for the deep sea riser are examined, and, using the estimated behavior, the applicability of the structural integrity evaluation methods is examined via numerical analysis.

NiAl2O4 nanoparticle was synthesized by a reverse micelle processing for inorganic pigment. N (NO3)2·6H2O and Al(NO3)3·9H2O were used for the precursor in order to synthesize NiAl2O4 nanoparticles. The aqueous solution, which consisted of a mixing molar ratio of Ni/Al, was 1:2 and heat treated at 800~1100 oC for 2h. The average size and distribution of synthesized NiAl2O4 powders are in the range of 10-20 nm and narrow, respectively. The average size of the synthesized NiAl2O4 powders increased with an increasing water-to-surfactant molar ratio and heating temperature. The crystallinity of synthesized NiAl2O4 powder increased with an increasing heating temperature. The synthesized NiAl2O4 powders were characterized by X-ray diffraction analysis(XRD), a field emission scanning electron microscop (FE-SEM), and a color spectrophotometer. The properties of synthesized powders were affected as a function such as a molar ratio and heating temperature. Results indicate that synthesis using a reverse miclle processing is a favorable process to obtain NiAl2O4 spinels at low temperatures. The procedure performed suggests that this new synthesis route for producing these oxides has the advantage of being fast and simple. Colorimetric coordinates indicate that the pigments obtained exhibit blue colors.

A part of engine torque is used to overcome the interior friction and to accelerate engine inertia. To enhance the driveability at the clutch slip control of AMT(Automated Manual Transmission) or parallel type hybrid system, it is important to know the exact drving torque of clutch. In this study, engine friction and rotational inertia are estimated by using LMS(Least Mean Square) method with vehicle test result. To verify the validity of method, the performance of vehicle is simulated with adjusted parameters. The test result and simulation result show the similar trend.

2005년 4월부터 2013년 10월까지 가평천 상류역 어류군집의 장기적인 변화를 조사하였다. 조사기간 동안 출현한 어종은 총 6과 17종 이었으며, 우점종은 Zacco koreanus(상대풍부도 59.9%), 아우점종은 Pungtungia herzi(8.5%) 이었다. 한국고유종은 Coreoleuciscus splendidus외 12종으로 확인되었다. 법적보호종은 멸종위기야생생물 Ⅱ급인 Pseudopungtungia tenuicorpa와 Gobiobotia brevibarba 등 2종으로 조사되었으며, 천연기념물은 Hemibarbus mylodon 1종이었다. 가평천의 수질등급은 최근 9년간 환경부 기준고시에 의거할 때 ‘매우좋음’ 등급을 유지하고 있었다. 육식어종인 Coreoperca herzi의 개체수는 감소하고, 잡식어종인 Zacco platypus는 증가하는 경향을 나타내었다. 군집분석 결과 우점도지수는 0.58∼0.86, 다양도지수는 0.94∼1.77, 풍부도지수는 0.99∼2.39의 범위로 나타났다. Rarefaction curve를 이용하여 연도별 기대 출현종수를 분석한 결과 151개체의 표본에서 예상되는 종은 최대 12종(2005), 최소 5종(2007)으로 나타났다. 가평천 상류역의 Z. koreanus 개체군을 대상으로 전장-체중 상관관계를 분석한 결과 회귀계수 b값은 연평균 3.29±1.11, 비만도는 0.0034±0.0021로 안정적인 개체군과 양호한 생육상태를 유지하고 있었다.

To contribute to the globalization of Korean food, a Korean food culture publicity event was conducted at Hayabusa Station, Tottori Province, Japan. This study investigated and analyzed recognition and preferences towards Korean food in participants at the event. The method of information acquisition was also analyzed. Most participants had prior experience eating Korean food. As for information, participants responded that they were affected by public media such as dramas, and the most effective way of getting information was participating in lectures. This study also investigated intake of 20 kinds of Korean food and found highest preferences for bibimbap, kimchi, naengmyeon, and galbigui, in that order. The main motive for participating in the Korean food culture publicity event was a desire to experience a new culture. Further, satisfaction, intention to participate, and intention to recommend Korean food were high. These attitudes had significant effects on the intention to visit Korea. In the future, Korean food culture publicity events held in foreign lands can contribute to Korean tourism.

Inorganic pigments have high thermal stability and chemical resistance at high temperature. For these reasons, they are used in clay, paints, plastic, polymers, colored glass and ceramics. CoAl2O4 nano-powder was synthesized by reverse-micelle processing the mixed precursor(consisting of Co(NO3)2 and Al(NO3)3). The CoAl2O4 was prepared by mixing an aqueous solution at a Co:Al molar ratio of 1:2. The average particle size, and the particle-size distribution, of the powders synthesized by heat treatment (at 900; 1,000; 1,100; and 1,200˚C for 2h) were in the range of 10-20 nm and narrow, respectively. The average size of the synthesized nano-particles increased with increasing water-to-surfactant molar ratio. The synthesized CoAl2O4 powders were characterized by X-ray diffraction analysis(XRD), field-emission scanning electron microscopy(FE-SEM) and color spectrophotometry. The intensity of X-ray diffraction of the synthesized CoAl2O4 powder, increased with increasing heating temperature. As the heating temperature increased, crystal-size of the synthesized powder particles increased. As the R-value(water/surfactant) and heating temperature increased, the color of the inorganic pigments changed from dark blue-green to cerulean blue.

W. B. 예이츠의 시의 번역의 역사는 1918년 김안서(1893-195?)가 처음 번역하여 서울의 한 서구문학번역 주간지에 실린 예이츠의 8행시 “그는 하늘의 천을 원하네”(1899년 작)로 거슬러 올라간다. 그 이후 이 시는 100년 동안 시인들과 작가들 에 의해 계속적으로 번역되었고, 가장 최근 2006년에는 17번째 번역이 나왔다. 본고는 이 시의 번역에서 어휘의 선택, 문장의 배열, 태도, 영향, 등에 대한 평을 한다. 본고 는 최초로 김안서의 번역이 영어원전의 번역이 아니라 구리야가와 하쿠손(1880-1923) 의 1905년 일본어 번역의 중역인 것을 보여주며, 또한 복수와 단수명사의 구분을 무 시하는 한국어 번역의 특성도 지적하며, 마지막으로 미래의 번역가들이 주의해야 할 문제들도 다룬다.