본 연구는 콘크리트구조기준(KDS 14-2021)을 적용한 RC보와 ACI 440.1R-15를 적용한 FRP 콘크리트의 비교 연구를 수행하였다. 파라미터 변수로 피복두께, FRP의 탄성계수 및 극한변형률 그리고 보강량 4가지로 설정하여 비교, 분석을 수행하였 다. 파라미터 연구 분석 결과 FRP의 탄성계수와 극한 변형률이 클수록 FRP 콘크리트의 휨성능이 우수하지만, 극한 응력이 동일 할 때 극한 변형률보다 탄성계수를 크게 하는 것이 유리하다. FRP 콘크리트가 인장지배 단면이나 변화구간 일 때 극한 변형률 증가에 휨성능이 비례해서 증가하지만 압축지배 단면일 경우에는 극한 변형률이 증가해도 휨성능은 증가하지 않는다. 또한, FRP 콘크리트는 최소 피복두께가 필요하지 않아 추가적인 휨성능이 17∼33% 증진 효과가 나타났다.

전 세계 각국은 탄소 배출량을 줄이기 위한 다양한 노력을 하고 있다. 지난 수십 년간 몇몇 연구자들은 탄소배출량 을 줄이기 위해서 철근콘크리트 구조에서 철근을 FRP로 대체하기 위한 연구를 수행해 왔다. FRP보강근을 휨부재로 사용하기 위한 연구는 많이 수행되어 왔으나, FRP 보강근 기둥의 성능을 평가하고 설계하기 위한 연구는 거의 이루어지지 않았다. 본 연 구는 FRP보강근 콘크리트 구조 기둥과 철근콘크리트 기둥의 P-M 상관도를 비교하고, 철근콘크리트 기둥에서 철근의 대체재로 서 FRP보강근의 활용 가능성을 제시하였고, 변수는 콘크리트의 압축강도, FRP보강근의 종류, 보강근비이다.철근을 GFRP로 대체 할 경우, 요구 GFRP 보강근의 양은 철근의 4배이며, 철근비가 4% 이상이면 동일한 단면으로는 설계할 수 없다. 편심거리비가 1.0보다 크거나 철근비가 4%보다 작은 철근콘크리트 기둥의 철근을 CFRP로 대체할 경우, 보강근의양을 1/2수준으로 줄이거나 단면 크기를 줄일 수 있다.

본 연구에서는 유리섬유보강근(GFRP rebar)를 적용한 SB6 등급 콘크리트 방호벽의 비선형 동적 해석을 수행하였다. ACI 설계기준에 근거한 새로운 방호벽 구조에 대하여 소형차와 트럭의 충돌에 대한 유한요소 모델링을 수행하였다. 트럭 충돌 에 대하여 제안한 모델은 기존의 철근을 적용한 모델과 비교하였을 때 구조적으로 만족할 만한 성능을 보였다. 또한, 소형차 충 돌 해석으로부터 산출한 탑승자 보호지수는 한계기준 범위 안에서 만족하였다. 이러한 결과로부터, 제안한 방호벽 구조는 기존 철근을 적용한 방호벽을 대체하여 실용적으로 적용이 가능할 것으로 기대된다.

Background: Shoulder impingement syndrome, a major cause of shoulder pain, involves weakness of the scapular retractor muscles. The major scapular retractor muscles are the middle trapezius and rhomboid major muscles; however, the latter is excluded in most studies. Objects: We aimed to measure the thickness of the middle trapezius and rhomboid major muscles using an ultrasonic diagnostic imaging system while performing four different shoulder retraction exercises and comparing the thicknesses and ratio of the thicknesses of these muscles. Methods: The thickness of the middle trapezius and rhomboid major muscles was measured in 24 healthy adults using ultrasound. Muscle thickness was measured three times in the Reference posture and four times while performing four different exercises that involved scapular retraction. The averages and standard deviations of the measured muscle thicknesses were obtained and compared. The ratio of muscle thickness and rate of changes in muscle thickness between the reference posture and the four exercises were compared. Results: For both, male (n = 10) and female (n = 14), there was a significant difference in the thickness of the middle trapezius muscle between the reference posture and the four exercises (p < 0.05) and in the thickness of the middle trapezius and rhomboid major muscles between male and female (p < 0.05); however, there was no significant difference in the ratio of the thicknesses of these muscles. Although a significant difference in the rate of change in muscle thickness during the four exercises was noted, there was no significant difference in the ratio of change in muscle thickness. Conclusion: This study demonstrates the ratio of the thicknesses of the middle trapezius and rhomboid major muscles and the rate of change in their thickness during exercises involving scapular retraction in healthy people in their 20s–30s.

Background: Shoulder external rotation exercises are commonly used to improve the stabilizing ability of the infraspinatus. However, during exercise, excessive activation of the posterior deltoid compared to the infraspinatus causes the humeral head to move anteriorly in an abnormal position. Many researchers have emphasized selective activation of the infraspinatus during shoulder external rotation exercise. Objects: This study aims to delineate the optimal exercise method for selective activation of infraspinatus by investigating the muscle activities of the infraspinatus and posterior deltoid according to the four shoulder exercise methods and two forearm positions. Methods: Thirty healthy individuals participated in this study. The participants were instructed to perform shoulder external rotation exercises following four exercise methods: sitting external rotation (SIER); standing external rotation at 90° abduction (STER); prone external rotation at 90° abduction (PRER); side-lying external rotation (SLER), and two forearm positions (neutral, supinated). The electromyography (EMG) signal amplitude was measured during each exercise. Surface EMG signals were recorded from the posterior deltoid, infraspinatus, and biceps brachii. Results: EMG results of the infraspinatus and posterior deltoid in PRER, were significantly higher than that of the other exercises (p < 0.01). The EMG ratio (infraspinatus/posterior deltoid) in SIER was significantly higher than that of the other exercises. EMG activation of the posterior deltoid in SIER, PRER, and SLER was significantly higher in neutral than in supinated (p < 0.01). Furthermore, the EMG of the infraspinatus in SIER was significantly higher in neutral than in supinated (p < 0.01). The EMG ratio (infraspinatus/ posterior deltoid) in SIER was significantly higher in neutral than in supinated (p < 0.05.) Contrarily EMG ratios in PRER and SLER were significantly higher in supinated than in neutral (p < 0.05). Conclusion: The results show that clinicians should consider these exercise methods and forearm positions when planning shoulder external rotation exercises for optimal shoulder rehabilitation.

In this paper, the flexural capacity equation of FRP-bar reinforced concrete beams was verified by comparing the experimental results and flexural capacity obtained according to the ACI procedure. And, also the economic feasibility of FRP-bar reinforced concrete beams was analyzed by comparing nominal moment capacity of beams. The results of analysis were as follows, 1) GFRP concrete beams have lower flexural performance than reinforced concrete beams, whereas CFRP concrete beams have similar flexural performance to reinforced concrete beams under the same reinforcement ratio 2) Although the design moment increased as the compressive strength of concrete increased, the flexural performance of GFRP reinforced concrete beams was found to be lower than the reinforced concrete beams for all reinforcement ratios.

Purpose: 본 연구의 목적은 4주기간동안 횡격막 호흡을 적용한 기구 필라테스 운동이 20대 성인의 유연성, 복부 근 두께, 근육량, 체지방, 호흡에 미치는 영향에 대해 알아보고자 하는 것이다. Methods: 근골격계 질환이 없는 대상자 35명을 대상으로 수행하였으며, 횡격막 호흡을 하는 그룹과 횡격막 호흡을 하지 않는 그룹으로 나누었으며, 두 그룹 모두 필라테스를 수행하였다. 실험에 사용한 기기로는 Ultrasonography(US), Pulmonary function tests(FEV1 / FVC), Bioeletic Impedance Analysis, Sit and reach test를 사용하였다. 정규성 검증을 실시한 후, 반복측정분산분석 (repeated measures of ANOVA)를 사용하여 운동 전, 호흡을 적용한 운동, 호흡 비적용 운동을 비교하였다. 사후 분석을 위해 Fisher’s LSD를 실시하였다. Results: 필라테스 운동은 복근의 두께와 유연성에 긍정적인 영향을 미쳤습니다. SaR test는 운동 전과 호흡을 적용한 운동과 호흡을 적용하지 않은 운동 사이에 유의한 유의성을 보였다(P <0.05). 근육두께 측정 TRA, EO, IO 모두 운동 전보다 호흡 적용 운동과 비호흡 운동에서 유의한 차이가 있었고(P <0.05), TRA와 IO에서는 추가 시간 사이에 유의한 차이가 없었다. 호흡하지 않는 운동(P >0.05). 그러나 EO에서는 호흡운동을 추가한 시간과 호흡운동을 하지 않은 시간 사이에 유의한 차이가 있었다( P <0.05). Conlusion: 결론적으로, 횡격막 호흡을 이용한 필라테스 운동과 횡격막 호흡이 없는 필라테스 운동은 복근의 두께와 유연성에 긍정적인 영향을 미치는 것으로 나타났다. 그러나 횡격막 호흡과 비횡격막 호흡 사이에는 큰 차이가 없었다.

Background: Individuals with calf muscle shortening may have decreased dynamic balance. Objects: This study aimed to investigate the effect of mobilization with movement (MWM) and myofascial release (MFR) on kinematic changes in dynamic balance in individuals with calf muscle shortening. Methods: Thirteen participants were randomly assigned to the MWM or the mobilization with movement added myofascial release (MWM-MFR) group. The MWM group received treatment with only MWM, whereas the MWM-MFR group was treated with MWM and MFR. Pre- and post-intervention passive range of motion (PROM), maximum reaching lengths, and modified star excursion balance test (MSEBT) results were compared for all participants. Wilcoxon signed-rank test and Mann-Whitney U test were used for statistical analysis. Results: The results showed significant within-group differences in ankle PROM, but no significant between-group differences. The maximum reaching length in the MWM-MFR group in the posterolateral direction was significantly different before and after the intervention (p = 0.005). This group also showed significantly reduced ankle abduction in MSEBT during the posteromedial direction section 3 (p = 0.007) and posterolateral direction section 5 (p = 0.049) compared with the MWM group. Conclusion: Combined MWM and MFR intervention improves ankle stability in the coronal plane during the posteromedial and posterolateral forward mo

Background: Gluteus medius muscle is important for the stability of hip joint. The sufficient core stability can be contributed to the performance of gluteus medius muscle in standing position. In addition, the external support may affect core stability in standing position. Objects: The purpose of this study was to investigated the effectiveness of the external support on the strength and muscle activity of hip abductor muscle during hip abduction in standing position in subjects without core stability. Methods: Fifteen subjects participated in this study. The subjects were evaluated by using the double-leg lowering with bent knees to measure the core stability. The strength and muscle activity of hip abductors was measured in standing position with the condition with and without external support using the tensiometer sensor and the surface electromyography. The paired t-test was used to investigate the difference between hip abductor strength and activity according to external support. The level of statistical significance was set at α = 0.05. Results: The hip abductor strength and muscle activity of gluteus medius muscle with external support were significantly greater than those without external support during hip abduction in standing position (p < 0.05). Conclusion: During hip abduction in standing position, the external support may be contributed to the improvement of the hip abductor strength and muscle activity of gluteus medius especially in the subjects without core stability.

Background: Lower back pain (LBP) is a major cause of disability and a common musculoskeletal disorder encountered at some point in life. Dysfunction of the lumbar vertebrae has been associated with decreased flexibility of the hamstrings, which exhibited a strong positive correlation with LBP. Hamstring tension affects lumbar pelvic rhythm. We aimed to activate pelvic stability with compression by Active Therapeutic Movement (ATM), muscle energy technique (MET) was applied to increase the flexibility of the hamstring. Objects: In this study, we aimed to investigate the effects of MET with ATM and general MET were applied to the hamstring of adults, who were in their twenties with nor without LBP, on their pelvic inclination and the length of their hamstring. Methods: A total of 32 subjects were briefed about the purpose of this study and agreed to participate voluntarily. Before the experiment, all subjects were pre-examined, and they were divided into an LBP group and a no lower back pain group accordingly. Thereafter, all subjects participated in both in a crossover manner. After at least one week, they switched to another group and participated in the same experiment. Results: The study results revealed that both groups demonstrated significant results in the modified active knee extension test (p < 0.01) and the sit and reach test (p < 0.01) performed to assess the hamstring flexibility; an interaction (p < 0.05) was noted. Moreover, a more significant difference was observed between the MET with ATM and the general MET. Although significant results were obtained for the pelvic inclination (p < 0.01), interaction was not noted. Conclusion: Conclusively, in this study, when the MET with ATM was applied to the two groups, there was a significant difference compared to the general MET for hamstring flexibility, but it was confirmed that there was no significant difference for the pelvic inclination.

Purpose: 본 연구의 목적은 본 연구의 목적은 2주간의 회전근개의 강화운동이 회전근개의 근육 두께, 견봉하 공간, 어깨 불안정성에 미치는 영향을 알아보고자 하는 것이다. Methods: 근골격계 질환이 없는 대상자 35명을 대상으로 수행하였으며, 횡격막 호흡을 하는 그룹과 횡격막 호흡을 하지 않는 그룹으로 나누었으며, 두 그룹 모두 필라테스를 수행하였다. 실험에 사용한 기기로는 Ultrasonography(US), Pulmonary function tests(FEV1 / FVC), Bioeletic Impedance Analysis, Sit and reach test를 사용하였다. 근골격계 질환이 없는 대상자 20명이 실험에 참여하였다. 근력 강화 운동은 2주 동안 주 5세트, 총 50세트 실시하였으며, 운동은 풀캔, 빈캔, 외회전 운동으로 진행하였다. 초음파를 이용하여 극상근과 극하근의 근육 두께와 견봉하 공간의 변화를 확인하였다. CSMI는 가시위근과 가시아래근의 근력을 평가하는 데 사용되었다. 정규성 검증을 실시한 후, 반복측정분산분석 (repeated measures of ANOVA)를 사용하여 운동 전, 1주후, 2주후를 비교하였다. 사후 분석을 위해 Fisher’s LSD를 실시하였다. Results: 근력의 비교에서 운동 2주 후 측정 시 내회전에서 유의한 차이가 있었다 (P <0.05). 외회전에서는 유의한 차이가 없었다 (P >0.05). 근육두께에서는 가시위근과 가시아래근의 근육 두께는 유의한 차이가 없었다 (P >0.05). 또한 봉우리밑 공간에서도 유의한 차이가 없었다 (P >0.05). Conlusion: 결론적으로, 빈캔 운동과 풀캔 운동, 측면 외회전 운동은 어깨관절 안쪽돌림의 근력 강화에 긍정적인 효과가 있었다

Background: Foot drop is a common symptom in stroke patients. Tape applications are widely used to manage foot drop symptoms. Previous studies have evaluated the effects of static and dynamic balance and gait on foot drop using kinesiology tape; however, only few studies have used dynamic tape application in stroke patients with foot drop. Objects: The purpose of this study was to investigate the immediate effects of dynamic taping, which facilitates the dorsiflexor muscle, on static and dynamic balance and gait speed in stroke patients with foot drop. Methods: The study included 34 voluntary patients (17 men, 17 women) with stroke. The patients were randomly assigned to the experimental group (n = 17), wherein dynamic taping was used to facilitate the dorsiflexor muscle, or the control group (n = 17), wherein kinesiology taping was used. Before the taping application, velocity average, path-length average, Berg balance scale, and timed up and go test (TUG) were recorded to measure static and dynamic balance, whereas the 10-meter walk test (10MWT) was used to measure gait speed. After the taping application, these parameters were re-evaluated in both groups. Repeated measure analysis of variance was used. Statistical significance levels were set to α = 0.05. Results: Except for the 10MWT scores in the control group, significant differences were noted in all the parameters measured for static and dynamic balance and gait speed between the pre and post-test (p < 0.05). However, the parameters showed significant interaction effects between group and time in the TUG and 10MWT (p < 0.01). Conclusion: These results indicate that compared with kinesiology taping, dynamic taping used in chronic stroke patients with foot drop had a more significant effect on dynamic balance and gait speed.

Background: Muscle activities of gluteus maximus (GM) and hamstring (HAM) have important roles in the stability and mobility of the hip joint during various functional activities including bridge and prone hip extension exercises. Objects: The purpose of this study is to investigate muscle activities of GM, multifidus (MF) and HAM during three different bridge exercises in healthy individuals. Methods: Twenty healthy subjects were participated. Electromyography device was used to measure muscle activities of GM, MF and HAM. Each subject was asked to perform three different bridge exercises with hip abduction (0°, 15°, 30°) in random order. One-way repeated measures analysis of the variance and a Bonferroni post hoc test were used. Statistical significance was set at α = 0.01. Results: The muscle activity of GM was significantly different among three conditions (hip abduction 0°, 15°, 30°) (adjusted p-value [Padj] < 0.01). The muscle activity of GM was significantly greater during bridge exercise with hip abduction 30° compared to 0° and 15° (Padj < 0.01). There was no significant difference in the muscle activity of MF and HAM muscle (Padj > 0.01). The ratio of muscle activity (ratio = GM/HAM) during bridge exercise with hip abduction 30° was significant greater compared to the hip abduction angles 0° and 15° (Padj < 0.01). Conclusion: Bridge exercise with hip abduction 30° can be recommended to selectively facilitate the muscle activity of GM and improve the ratio of muscle activity between GM and HAM.

본 연구는 이러한 단점을 보완하기 위해 철근을 대체하여 내산화성과 전기저항이 높은 GFRP 보강근을 적용한 도상슬래브의 최적 변수해석을 수행하였다. 철도 궤도슬래브에 적용되는 철근은 열차 운행 중 신호전류의 손실을 일으켜 열차의 안정성을 저해하며, 철 근의 부식으로 내구성이 저하될 수 있다. GFRP 보강근의 직경 및 배근 개수 변화가 전체 콘크리트 도상슬래브의 휨강도 및 균열제어 에 미치는 영향을 유한요소 변수해석을 통하여 상세분석하였다. 해석 결과, GFRP 보강근의 직경 및 배근을 합리화하여 제안하였으며 이러한 경우 기존 배근보다 더욱 경제적인 단면을 도출할 수 있음을 알 수 있었다. 본 연구로부터 도출된 결과는 향후 GFRP 보강근을 적용하여 도상슬래브를 설계하는 경우 보다 합리적이고 경제적인 단면을 산정할 수 있는 가이드라인이 될 수 있을 것으로 기대된다.