Bi co-doped ZnS:Mn,Bi yellow phosphors for white light emitting diodes were prepared by the conventional solidstate reaction method. The optical and structural properties of ZnS:Mn,Bi phosphors were investigated by x-ray diffraction, scanning electro microscopy and photoluminescence. ZnS:Mn,Bi phosphors showed XRD patterns of hexagonal structure. The photoluminescence of ZnS:Mn,Bi phosphors showed spectra extending from 480 to 700 nm, peaking at 580 nm. The photoluminescence of 580 nm in the ZnS:Mn,Bi phosphors was associated with the 4T1 → 6A1 transition of the Mn2+ ions. The highest photoluminescent intensity of the phosphors under 405 nm and 450 nm excitation was obtained at Bi concentration of 7mol%. The optimum mixing conditions with epoxy and yellow phosphor for white light emitting diodes were observed in a ratio of epoxy:yellow phosphor of 1:3.5. The CIE chromaticity of the white LED at the 1:3.5 ratio was X = 0.3454 and Y = 0.2449.

This experiment was carried out to clarify the effect of light qualities on the growth characteristics and yield of fruiting body in the cultivation of Lyopyllum ulmarium. The intensity of illumination by type of light was in the order of white light(2,270Lux), yellow light(1,750Lux), blue light(460Lux) and red light(400Lux). An investigation of fruiting body showed these results that the pileus size and stipe diameter of fruiting body on CBM (Chungbuk mushroom)-1757 were much larger than Hypsizigus marmoreus, and an effect of yellow light seemed to be better than those of another light. In comparison with Hypsizigus marmoreus, the growth duration of CBM-1757 was shortened by 8 days which included 2 days for fungi culture, 1 day for first pinning requirement and 1 day for growth. The growth duration in yellow light illumination was about 70 days showing the tendency of 2~4 days reduction. There were no differences in results such as number of effective stem and fresh weight. The yield of fruiting body per bottle in CBM-1757(95.6g) was little higher than Hypsizigus marmoreus(94.8g). By a white light’s standard, the yields of blue and red light illumination were decreased by 2~9%, but that of yellow light illumination was increased by 8%. The chromaticity results showed that brightness, red and yellow coloration of CBM-1757 were higher than those of Hypsizigus marmoreus, and yellow light treatment was more effective than another light.

1. 광 종류별 조도는 백색광은 2,270Lux로 가장 밝았으며, 황색광 1,750Lux, 청색광 460Lux, 적색광 400Lux의 순이었다. 2. 자실체 특성을 조사한 결과, CBM-1757이 느티만가닥버섯에 비하여 갓의 크기와 대직경이 양호한 경향이었으며, 광 종류간에는 황색광에서 다른 광에 비하여 다소 좋은 경향이었다. 3. 생육기간은 CBM-1757이 느티만가닥버섯에 비하여 균 배양일수는 2일, 초발이소요일수는 1일, 생육일수는 1일정도 단축되어 생육기간이 8일 정도 빠른 경향이었다. 광종류간에는 황색광에서 생육기간이 70일 소요되어 다른 광에 비하여 2~4일 정도 단축되는 경향이었다. 4. 유효경수 및 개체중은 품종간에 차이가 나지 않는 경향이었고, 병당 수량은 느티만가닥버섯 94.8g에 비하여 CBM-1757은 95.6g으로 약간 많았다. 광 종류간에는 백색광의 96.0g에 비하여 청색광 및 적색광에서는 2~9%가 감소되었으나, 황색광에서는 103.4g으로 8% 정도 증수되는 경향이었다. 5. 버섯의 색도는 CBM-1757이 느티만가닥버섯에 비하여 명도, 적색도 및 황색도가 높았으며, 광 종류간에는 황색광에서 다른 광에 비하여 다소 높은 경향이었다.

A new blue phosphorescent material for organic light emitting diodes (OLEDs), Iridium(III)bis[2-(4-fIuoro-3-benzonitrile)-pyridinato-N,C2'] picolinate (Firpic-CN), was synthesized and studied. We compared characteristics of Firpic-CN and Bis(3,5-Difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium III (FIrpic) which has been used for blue dopant materials frequently. The devices structure were indium tin oxide (ITO) (1000 a)/N,N'-diphenyl-N,N'-(2-napthyl)-(1,1'-phenyl)-4,4'-diamine (NPB) (500 a)/4,4'-N,N'-dicarbazole-biphyenyl (CBP) : FIrpic and FIrpic-CN (X wt%)/4,7-diphenyl-1,10-phenanthroline (BPhen) (300 a)/lithum quinolate (Liq) (20 a)/Al (1000 a). 15 wt% FIrpic-CN doped device exhibits a luminance of 1450 cd/m2 at 12.4 V, luminous efficiency of 1.31 cd/A at 3.58mA/cm2, and Commission Internationale d'Eclairage (CIEx,y) coordinates of (0.15, 0.12) at 12 V which shows a very deep blue emission. We also measured lifetime of devices and was presented definite difference between devices of FIrpic and FIrpic-CN. Device with FIrpic-CN as a dopant presented lower longevity due to chemical effect of CN ligand.

An investigation was conducted to evaluate both the time required and the time allowed for persons to cross streets. Currently, the local municipality uses a standardized formula to determine the time allotted for 'WALK' signals to function allowing pedestrian traffic to cross thoroughfares. The formula to determine the 'Theoretical Time(in seconds)' is the width of the street(in meter) divided by 1.2m/s. The basis of the denominator is 'normal' walking speed. Initially, 3 locations were chosen to evaluate the time between the appearance of the 'WALK' signal and the appearance of the 'DON'T WALK'. The interval between the two signals was assumed to allow a person to begin crossing the street at the appearance of the 'WALK' signal and terminate their crossing at the appearance of the 'DON'T WALK' signal. Of the 3 locations, 2 locations(elementary?middle schools and general hospital areas), the duration of the 'WALK' signal were not properly set and therefore need more time for those who use these cross walks. Specific details regarding the crossing locations and validity of the standardized formula were also presented and discussed.

본 연구는 오이와 토마토의 플러그 묘 공정육묘시 발생하는 도장 억제를 위한 적생광 처리시기와 광도의 영향을 알아보기 위해 실험을 수행하였다. 일몰 휴, 야간 및 일출 전 적색광 처리시기에 의한 묘의 도장억제는 일몰 후 처리가 오이와 토마토의 초장을 각각 21.3%와 14.2%로 가장 크게 억제하였고, 경경의 굵기도 가장 두꺼웠다. 엽록소함량은 토마토에서만 일몰 후 처리된 플러스묘의 함량이 대조구에 비해 유의적으로 높게 나타났다. 적색광 초리시기에 의한 두 작물의 건물중을 보면, 대조구에 비해 지상부 건물중은 일몰 후와 일출 전 적색광 처리에 의해 유의적인 감소를 보였다. 오이와 토마토 플러그묘의 T/R율은 일몰 후 처리에서 타 처리에 비해 가장 작았으며 조ㅈ직의 충실도는 밀몰 후 처리에서 가장 크게 나타났다. 광도별 처리에 의한 초장은 오이와 토마토 플러그묘 모두에서 광도가 증가함에 따라 초장은 감소하였다. 하배출, 절간장 및 엽면적도 초장과 유사한 경향을 나타내었다. 두 작물 모두 경경과 엽록소함량 및 조직의 충실도는 광도가 증가함에 따라 증가하는 경향을 보였다. 하지만 지상부와 지하부의 건물율은 광도의 증가에 따라 감소하는 경향이 나타났으며, 오이는 2 및 8 μmol·m-2·s-1의 적색광 처리구에서 토마토는 8 μmol·m-2·s-1처리구에서 가장 낮은 T/R율을 나타내었다.

The objective of this study was to analyse the antivibration characteristics of gloves by frequency band while operating light-weighted powered hand grinder. A methodology to estimate vibration isolation effectiveness of gloves was proposed on the basis of overall R.M.S. transmissibility characteristics. And overall R.M.S. transmissibilities of L-, M- and H-spectra were compared. Electric hand grinder was tested in the laboratory and attenuation performances of 3 different gloves(full finger antivibration glove, open finger antivibration glove, and cotton glove) were considered. Eight healthy male subjects were employed to polish metal plate with a tool. The results indicate that there was no significant difference among antivibration characteristics by frequency bands while operating light-weighted electric hand grinder.

Diphosphine dinuclear gold(I) complexes were synthesized from the reaction of bridged diphosphines and gold ions. As a bridged diphosphine, 1,2-bis(diphenylphosphino)metbane (dppm) or 1,1'-Bis(diphenylphosphino) ferrocene (dppf) was introduced. As anionic ligands, CI was first coordinated to Au, resulting in (diphosphine)(AuCl)2. Then, the ligand, SPh, was substituted for Cl in the chloride complex to give (diphosphine)(AuSPh)2. As a result, three digold complexes, (dppm)(AuCl)2. (I), (dppf)(AuCl)2. (II), and (dppf)(AuSPh2. (III) were prepared in this study. The thermal properties were investigated at first hand to confirm that the gold complexes were in fact formed. The digold complexes were decomposed above 200℃ while the ligand, dppm or dppf, melts under 180℃ The photoluminescence (PL) spectra of the spin-coated thin films showed the maximum peak at 590, 595, and 540nm for the complex, I, II, and III, respectively. These complexes were found to give the orange color phosphorescence. Therefore, these digold complexes can be candidates for orange-red phosphorescent materials in organic electroluminescent devices (OELD). Further studies on application of the complexes as a dopant in an emitting layer are in progress in our laboratory.

Recently, the phosphorescent organic light-emitting devices (OLEDs) have been extensively studied for their high internal quantum efficiency. In this study, we synthesised several phosphorescent metal complexes, and certified their composition using NMR. We also investigated the characteristics of the phosphorescent OLEDs with the green emitting phosphor, Ir(ppy)3. The devices with a structure of indium-tin-oxide(ITO)/N,N'-diphenyl-N,N'-(3-methylphenyI-1,1'-biphenyl-4,4'-diamine (TPD)/metal complex doped in host materials/2,9-dimethyl-4,7-diphenyl-l,10-phenanthroline(BCP)/tris (8-hydroxyquinolinato) Aluminum(Alq3)/Li:Al/Al was fabricated, and its electrical and optical characteristics were studied. By changing the doping concentration of tris(2-phenylpyridine)iridium (Ir(ppy)3), we fabricated several devices and investigated their characteristics.

We have seen the effects of buffer layer in organic light-emitting diodes(OLEDs) using poly(N-vinylcarbazole)(PVK) depending on a concentration of PVK. Polymer PVK buffer layer was made using spin casting technique. Two device structures were fabricated; one is ITO/TPD/Alq3/Al as a reference, and the other is ITO/PVK/TPD/Alq3/Al to see the effects of buffer layer in organic light-emitting diodes. Current-voltage-luminance characteristics and an external quantum efficiency were measured with a variation of spin-casting rpm speeds and PVK concentration. We have obtained an improvement of external quantum efficiency by a factor of four when the PVK concentration is 0.1wt% is used. The improvement of efficiency is expected due to a function of hole-blocking of PVK in OLEDs.

An attempt has been made to analyze time series of Hα, Hβ, and Hɤ line profiles taken from a 3B/X6.1 flare which occurred on Oct. 27, 1991 in an active region, NOAA 6891. A total of 22 sets of Hα, Hβ, and Hɤ taken with a low and non-uniform time resolution of 10-40 seconds were scanned by PDS with absolute intensity calibration to derive the physical characteristics of the material in the flare chromosphere. Our . results are as follows: (1) The lower Balmer lines observed during the flare activity are broadened by Stark effect. (2) At the peak of the flare activity, the electron temperature of the Balmer line emitting region reaches up to 35000K and its geometrical thickness increases to a scale of ~104km, suggesting that high energy particles penetrate deep into the photospheric level.

The light curve and radial velocity curve of multiperiodic dwarf cepheid VI719 Cyg (HD200925) with peculiar light curve have been reanalyzed in order to identify the oscillation modes to confirm the helium settling within the envelope. To do these, through the period search for the photometric and radial velocity data from the literature, two different periods were determined and the oscillation modes corresponding to the first and second periods were identified as the fundamental and first radial overtones. Hence the helium settling within the envelope was confirmed from the period ratio. The color excess, metallicity, effective temperature, and surface gravity corresponding to two different modes were determined and it was found that these parameters almost do not depend upon different oscillation mode. By utilizing the surface brightness method, we investigated the variation of angular diameter and radial displacement and it was found that the angular variation is very peculiar. Also by referring to the stellar models, mass and age were determined as 2.7 M ⨀ and 0.42 Gyr respectively which make this variable star heavier and younger than other multimode dwarf cepheids. Preliminary spectroscopic CCD observations were carried out and it was found that Mg in VI719 Cygni is nearly solar abundent according to the analysis of 5172.68 |AA M g I line which is inconsistent with the photometric result. It was suggested that VI719 Cyg may be classified as a ρ Pup stars according to the photometric characteristics.

이 연구에서는 풍력-태양광 하이브리드 가로등 구조물에 대한 동적 응답을 계측하여, 서로 다른 터빈을 적용하였을 때의 진동 특성 및 공진현상을 비교하였다. 2엽 및 3엽 풍력터빈을 적용하였으며, 하이브리드 가로등이 가지고 있는 진동 특성은 가동 중인 조건에서의 동특성과 가진력을 비교하여 분석하였다. 최근 제안된 방법을 통해 가속도 계측자료를 이용하여 변위 응답을 추정하였고, 2엽 풍력터빈을 적용한 경우 동적 변위 응답의 진폭은 공진 하의 조건에서 4~6cm 범위에 있고, 3엽 풍력터빈을 적용한 경우에는 공진이 발생하지 않아 변위는 2mm 이내로 제한됨을 알 수 있었다.

This study is conducted to investigate the effects of growth characteristics (GC) and DPPH radical scavenging activity (DRSA) of the heading lettuce ‘Fidel’ depending on four concentrations of activated mineral groups (AMG: 1.6% active minerals and 0.03% CaO) added to basic nutrient solutions (diluted by 0, 0.05, 0.1, and 0.2%) and on four different light-emitting diodes (LED; B:R:W ratio = 0:1:12, 0:1:9, 0:5:5, and 2:3:5). Both 0.1 and 0.2% AMG showed better GC of lettuce in plant width, plant length, leaf width, leaf length, and the number of leaves than those of other AMG, while leaf thickness and chlorophyll value did not show significant difference among all AMG. Moreover, 0.1 and 0.2% AMG showed heavier shoot fresh weights than those of other AMG. As for the combinations of AMG and LED, B0:R5:W5 showed the best lettuce GC regardless of AMG compared to other AMG and LED combinations. As shown in the above results of LED, although there was a difference in lettuce growth by LED, the differences of lettuce growth by AMG were statistically significant. The DRSA was the highest at 82.8% in B2:R3:W5, followed by B0:R5:W5 at 77.8%. LED showed differences but AMG did not affect DRSA. Therefore, the optimal conditions in plant factory for GC and DRSA of the lettuce were 0.1% AMG and B0:R5:W5.

Background : The ginseng cool-season and semi-shade plant undergoes photosynthesis smoothly at low temperature in the morning but its efficiency falls at high temperature in the afternoon. Therefore, if it is possible to control light transmission rates (LTR) every day, it will be able to draw an ideal result in the ginseng growth by attracting a lot of lights before 11am and attracting few lights after 11am which is the affect point of the photosynthetic efficiency. Methods and Results : While installing the sun shading facility that could control the light environment based on 11am and surveying the ginseng's growth and photosynthetic characteristics. The photosynthetic efficiency increased 2.81 times compared to conventional practices without the change of the chlorophyll content although LTR was high because of the low temperature in the morning. The aboveground part growth of the ginseng which adapted to the light environment increased to influence the root weight, when the ginseng was 4 years old, the fresh root weight was averagely 33.3g per plant which increased by 81% than 18.4g of conventional practices. Conclusion : If the light environment management according with the photosynthetic nature of the ginseng is conducted based on 11am, it will be possible to produce a large capacity and excellent-quality ginseng.