It is a well known that concrete is strong for compression and weak for tension. For reinforcing the weakness and improving the performance about concrete, various methods are used. Fiber reinforced concrete that is one of them has been investigated in this study. The function of fiber in concrete is to improve the stress strain relation and toughness, crack control. It’s applied from normal strength concrete to ultra-high performance concrete. But it is essential to disperse fiber uniformly and to prevent aggregation of fiber in concrete, in order that fiber reinforced concrete show the sufficient performance. The various properties of fiber affect the essential properties, for instance, length and diameter of fiber, source, etc. So, this study evaluated the ultra-high performance concrete with mixed in composite fiber.

A type of one-way concrete composite slabs made by strain hardening cementitious composites (SHCC) deck combined with high tensile reinforcements was developed and evaluated by four-point slab bending test. The SHCC material was considered to have an high-ductile and strain hardening behavior in tension after cracking. From experimental comparisons with conventional reinforced concrete slab, the proposed SHCC and high tensile reinforced concrete composite slab showed more improved responses both in service and ultimate load capacities as well as in control of crack width and deflection.

Since 1990’s, many researches about ultra high performance concrete have been conducted. Compare to conventional concrete, it shows significantly high compressive and tensile strength so that leads to reduce the self weight of structures. However, the use of slender member may meet the buckling failure that is not common phenomenon in concrete structures so far. Most design codes have not suggested any provisions for buckling limit states and very few of researches have been conducted for buckling of concrete girders. In this study, a number of finite element analysis were carried out to investigate the buckling behavior of UHPC I-shaped girders.

This study investigates the flexural shear strength of ultra high performance concrete I-girder. The effect of aspect ratio on the flexural - shear strength of UHPC was analyzed using finite element analysis. The UHPC I-type girder was modeled using 3D shell elements and analyzed using geometric and material nonlinear analysis. The boundary condition is simple support condition and a displacement load is applied to the center of the upper flange. The results shows that shear strength decreased as the aspect ratio increased and the bending-shear failure of UHPC I-girder does not occur even at larger moment than ordinary concrete due to the cross-linking action of steel fiber.

UHPC(Ultra High Performance Concrete) is used widely with its remarkable performance, such as strength, ductility and durability. Since the fibers in the UHPC can control the tensile crack, the punching shear capacity of UHPC is higher than that of the conventional concrete. In this paper, seven slabs with different thickness and fiber volume ratio were tested. The ultimate punching shear strength was increased with the fiber volume ratio up to 1%. The shear capacity of specimens with the fiber content 1% and 1.5% do not have big differences. The thicker slab has higher punching shear strength and lower deformation capacity. The critical sections of punching shear failure were similar regardless of the fiber volume ratio, but it were larger in thicker slab.

Ultra High Performance Fiber Reinforced Concrete (UHPFRC) has a outstanding tensile hardening behaviour after a crack develops, which gives ductility to structures. Existing shear strength model for fiber reinforced concrete is entirely based on crack opening behavior(mode I) which comes from flexural-shear failure, not considering shear-slip behavior(mode II). To find out the mode I and mode II behavior on a crack in UHPFRC simultaneously, maximum shear strength of cracked UHPFRC is investigated from twenty-four push-off test results. The shear stress on a crack is derived as variable of initial crack width and fiber volume ratio. Test results show that shear slippage is proportional to crack opening, which leads to relationship between shear transfer strength and crack width. Based on the test results a hypothesis is proposed for the physical mechanics of shear transfer in UHPFRC by tensile hardening behavior in stead of aggregate interlocking in reinforced concrete. Shear transfer strength based on tensile hardening behavior in UHPFRC is suggested and this suggestion was verified by comparing direct tensile test results and push-off test results.

본 연구에서는 고로슬래그 미분말 및 플라이애시와 같은 광물질 혼화재를 사용한 친환경 고성능 3성분계 시멘트 콘크리트 교면 포장의 성능을 평가하기 위하여 실험을 하였다. 광물질 혼화재의 혼입률 변화에 따른 3성분계 시멘트 콘크리트의 최적배합을 찾기 위하여 압축강도 및 휨강도 시험을 하였으며 최적배합을 사용하여 내구성 시험인 염소이온 침투저항성, 동결융해, 박리 저항성, 균열 저항성 및 알칼리골재반응 시험으로 친환경 고성능 3성분계 시멘트 콘크리트 교면 표장의 내구성 평가 및 신 구 콘크리트의 부착력을 평가하기 위하여 부착강도 시험을 하였다. 시험결과, 시멘트 70%, 고로슬래그 미분말15% 및 플라이애시 15%의 배합 바인더에서 압축강도 및 휨강도가 우수하게 나타났으며 이를 최적배합으로 도출하였다. 실내 및 시험시공에서 최적 배합을 사용한 실험결과는 염소이온 침투 저항성, 동결융해 저항성, 표면박리 저항성, 알칼리골재 반응 억제 및 내마모성이 우수하게 나타났다. 또한, 특수 제작된 Polymer Cement Mortar(Brooming)를 사용한 신 구 콘크리트의 부착력에서도 우수한 성능을 나타냈다.

High-performance concrete (HPC) is a new terminology used in concrete construction industry. Several studies have shown that concrete strength development is determined not only by the water-to-cement ratio but also influenced by the content of other conc

High-performance concrete(HPC) is a new terminology used in concrete construction industry. Several studies have shown that concrete strength development is determined not only by the water-to-cement ratio but also influenced by the content of other concrete ingredients. HPC is a highly complex material, which makes modeling its behavior a very difficult task. This paper aimed at demonstrating the possibilities of adapting artificial neural network (ANN) to predict the comprresive strength of HPC. Mahalanobis Distance(MD) outlier detection method used for the purpose increase prediction ability of ANN. The detailed procedure of calculating Mahalanobis Distance (MD) is described. The effects of outlier compared with before and after artificial neural network training. MD outlier detection method successfully removed existence of outlier and improved the neural network training and prediction perfomance.

본 연구는 고성능콘크리트의 강도조절과 수화열 저감을 위하여 쇄석 쇄사 생산시 발생되는 쇄석미분말을 사용하여 고성능콘리트의 강도, 유동성 내구성능 및 건조수축 특성을 검토한 것이다. 실험결과 쇄석미분말은 치환율 10% 증가시마다 무치환시의 압축강도를 약 10~15%씩 감소시키며, 변형계수와 물구속비를 감소시켜 고성능콘크리트의 유동성 향상에 효과적이다. 또한, 고성능콘크리트에서 쇄식미분말 10% 치환시 마다 단위시멘트량 감소에 따른 최고 단열온도상승량을 약 4℃씩 감소시켰다. 반면 건조수축랑은 10% 치환시마다 약 5% 증가시키는 것으로 나타났다. 한편 고성능콘크리트의 내구성은 단위분체량과 유동성향상에 따른 조직의 치밀화로 쇄석미분말의 치환에 관계없이 상대동탄성계수 100%이상으로 우수하게 나타났다. 이와 같이 문제로서 쇄석미분말의 사용은 치환량에 따른 고성능콘크리트의 강도조절이 가능하며 수차 발열량을 저감시킬 수 있다.

본 연구에서는 콘크리트의 건조수축을 저감시키며 강도와 내구성을 높임과 동시에 콘크리트의 주간 태양광에 의한 반사도를 줄인 저수축, 저반사, 고강도, 고내구성, 콘크리트 포장재료를 개발하였다. 문헌조사를 바탕으로 건조수축 저감과 장기강도 발현에 효과가 있는 플라이 애쉬와 반사도를 저감시키기 위하여 검은색 안료를 넣고 강도와 내구성을 좋게 하기 위해 최적입도를 고려하여 배합설계를 하였다. 실내실험을 통해 검은색 안료의 첨가율에 따른 명암값과 반사율은 차이가 없는 것으로 나타났으며 최적입도를 고려하면 강도와 내구성에서 좋은 것으로 평가되었다. 또한 플라이 애쉬를 사용한 배합이 건조수축 저감에 효과가 있었으며 염화이온 침투 저항성도 높은 것으로 드러났다. 플라이 애쉬(25% 치환)와 검은색 안료(3% 첨가)를 넣고 최적입도를 고려한 배합이 건조수축과 반사율 저감, 강도와 내구성 향상에 가장 적합한 배합으로 판단하였다. 경제성 분석을 통하여 일반 콘크리트 포장보다 저수축 저반사 고강도 고내구성 콘크리트 포장이 초기공사비는 많은 것으로 분석되었지만 장기적인 관점에서 유지보수비용과 사회비용 감소로 인하여 경제성으로 타당한 것으로 나타났다.

콘크리트의 수화물 및 이와 관련된 특성치들은 재령에 따라 변화하며 이는 염화물 확산성과 큰 관련이 있다. 본 연구에서는 세 가지 수준의 물-결합재 비와 플라이 애시 및 고로슬래그 미분말을 30% 혼입한 콘크리트 대하여 2년간 장기 양생을 수행하였다. 5번의 측정 시점(28일, 56일, 180일, 365일, 730일)에 대하여 촉진실험을 통하여 촉진 염화물 확산계수를 평가하였으며, DUCOM을 통하여 도출된 공극률, 염화물 구속능, 투수계수의 변화와 비교하였다. 염화물 확산성과 투수성의 변화 패턴이 가장 유사하였는데, 이는 투수성이 공극률의 제곱에 비례하기 때문이다. 또한, 각 재령 기간 동안 변화하는 비율을 분석하였는데, 초기 재령(재령 28일~56일)에서 공극률, 투수성 및 염화물 확산성의 변화가 지배적이었고, 낮은 물-결합재 비를 가진 OPC 콘크리트에서는 180일까지 확산성의 변화가 지속적으로 크게 평가되었다.

이 연구에서는 최근 개발된 강섬유 보강 초고성능 콘크리트(UHPSFRC)의 압축연화 거동을 실험을 통해 측정하였다. 압축 연화곡선을 안정적으로 측정하기 위해 실험체의 횡 방향 변형을 제어하여 실험을 수행하였다. 실험에 사용한 UHPFRC의 배 합은 모두 세 가지(M1, M2, M3)이며, 평균 압축강도는 각각 순서대로 131.0, 161.6, 171.5 MPa로 측정되었다. 압축강도와 섬유함유량에 따라 압축연화곡선의 거동이 다르게 나타났다.

In order to investigate the confinement behavior of reinforced concrete columns using high strength materials, we performed loading tests on the columns with different combinations of reinforcement strength. Base on the test results together with previous studies, the confinement capacity of high strength reinforced concrete column was evaluated and the adequacy of the confinement design equation in the KCI code was discussed. As a result, it is found that the energy dissipation capacity increases as the yield strength increases.

This paper presents development of a high-performance concrete median barrier by means of device allowing deformation. A series of numerical analyses and full-scale crash tests were was conducted to develop optimized section of SB6 concrete median barrier The suggested section of SB6 concrete median barrier satisfies all requirements specified by MOLIT(Ministry of Land, Infrastructure and Transport)

This paper presents the mechanical properties of high performance fiber-reinforced concrete composites(HFCC) according to binder replacement rate. the compressive strength and single-axial tensile strength of HFCC were evaluated according to binder replacement rete. As a result of the test, the compression strength decreased as binder replacement rates increased, and B-20 mix properties expressed the most ideal tensile strain-stress curve.

The purpose of this experimental study is to investigate the influence of chemical resistance of porous concrete using high performance nano TiO2 Carrier. As a result, porous concrete using high performance nano TiO2 Carrier was confirmed to be superior than ordinary concrete and TiO2 concrete chemical resistance.

Effect of confining pressure on the shear strength of ultra-high-performance fiber-reinforced concrete (UHPFRCs) was investigated using a new shear test setup. Different confining pressures were applied and maintained to the specimens prior to shear testing. The shear strength of UHPFRCs was obviously sensitive to the confining pressure: the higher confining pressure produced higher shear strength. The confined shear strength could be expressed as a function of unconfined shear strength, confining pressure, and tensile strength.