본 연구는 구리화합물계 목재방부제로 가압방부처리된 난주입수종이 국내 지상부 목재사용환경에서 방부성능을 유지할 수 있는 조건을 파악하기 위하여 수행되었다. 장기간(12년)의 지상부 야외노출시험을 통하여 방부성능이 입증된 방부처리 목재를 대상으로 목재 내부에 존재하는 주요 방부성 분인 구리의 분포 상태를 조사하였다. 구리 정색반응 결과를 살펴보면 변재는 대부분 균일하게 처리되었지만, 심재에서 구리의 침투는 목재 표면에 국한되어 있는 것으로 나타났다. 심재에서 구리의 침투는 국내 방부목 표준규격에서 요구하는 심재의 최소 침윤깊이(8 mm)를 만족하지 못하였다. 그러나 기준을 만족하지 못한 방부처리 시편들도 우수한 방부효능을 가지고 있다는 것을 알 수 있는데 이러한 결과는 난주입수종의 적절한 활용을 위해 국내 규격의 보완이 필요하다는 것을 의미한다.

The restraints are used in the intensive care unit as a way to restrict the movement of the whole body or part of the body for the safety of the patient, such as maintaining medical equipment, preventing falls and patient self tube removal through regulating the patient's behavior. However, the physical restraints are used for the physical safety of the patient, but that is cause a variety of physical and psychological complications. Thus, nurses in intensive care units who apply restraint on face an ethical dilemma in the confrontation between the nurse's duty to improve the patient's health and protect the patient's safety and the value of the patient's autonomy and dignity. We have two examples are proposed to identify the ethical dilemma situation faced by nurses, to induce an active attitude towards elimination by establishing exactly restraint - removal criteria. In addition, it is proposed to seek a balance of individual values through active communication between the patient and the medical staff regarding the application of the restraint.

Estuary is important in terms of biodiversity because it has the characteristics of transition waters, created by the mixing of fresh- and seawater. The estuarine water circulation provides a variety of habitats with different environments by inducing gradients in the chemical and physical environment, such as water quality and river bed structure, which are ultimately the main factors influencing biological community composition. If the water circulation is interrupted, the loss of brackish areas and the interception of migration of biological communities will lead to changes in the spatial distribution of biodiversity. In this study, among the sites covered by the Estuary Aquatic Ecosystem Health Assessment, we selected study sites where changes in biodiversity can be assessed by spatial gradient from the upper reaches of the river to the lower estuarine area. The α-, γ- and β-diversity of diatom, benthic macroinvertebrates, and fish communities were calculated, and they were divided into open and closed estuary data and compared to determine the trends in biodiversity variation due to estuarine circulation. As results, all communities showed higher γ-diversity at open estuary sites. The benthic macroinvertebrate community showed a clear difference between open and closed estuaries in β-diversity, consequently the estuarine transects were considered as a factor that decreases spatial heterogeneity of their diversity among sites. The biodiversity trends analyzed in this study will be used to identify estuaries with low γ- and β-diversity by community, providing a useful resource for further mornitoring and management to maintain estuarine health.

In order to find out the management and sanitation status of protective gear provided at the construction site, a case study and survey were conducted by visiting the site. As a result of the case study, inspection and management, disinfection, and storage of protective equipment were insufficient in both workplaces with less than 50 employees and workplaces with more than 100 employees. As a result of the survey, workers(66.2%), said they did not know how to identify hard hats(67.6.%), how to identify bad hard hats(60.8%), and how to identify bad safety belts (73.0%), even though workers(66.2%) were educated on protective gear, and those in charge of protective gear Non-specified(56.8%), regular inspection of the provided protective equipment was not performed(82.4%), and disinfection was not performed(90.5%). Therefore, as a management plan to maintain the performance of personal protective equipment, educational aspects, regular training on protective equipment, training on how to identify defective protective equipment, management of recording papers, technical aspects, strengthening of standards for placement of dedicated safety managers in small workplaces, participation of workers’ representatives when selecting protective equipment, and selection of protective equipment for workers Providing opportunities, administrative aspects of protective equipment regulation and management, introduction of sanitary and cleanliness system, and selection of personnel in charge of protective equipment management were suggested.

Asphalt concrete(Ascon) is used to repair potholes and cracks. Special truck-mounted cargo boxes transport 200℃ asphalt concrete to repair potholes and cracks. However, long working and transportation hours to repair wide roads decrease the temperature of the asphalt concrete inside the cargo boxes. If the asphalt concrete temperature drops below 170℃, the adhesion with roads that need repair decreases. Therefore, the temperature of the asphalt concrete needs to be maintained for a long time. Conventional asphalt concrete cargo boxes are mostly burner-type models using hot air to prevent the temperature of the asphalt concrete from dropping. However, there are significant temperature differences between the asphalt concrete near and far away from the hot air, so the temperature decreases over time and leads to the disposal of large amounts of asphalt concrete. This causes waste of resources and environmental pollution. Therefore, this study proposed a heat dissipation cut-off type cargo box model to solve this problem and demonstrated its performance over conventional burner-type models through tests and analysis.

This study was described with a focus on the maintenance and management of Local Confucian School(Hyanggyo) architecture, centering around cases investigated through official documents written in the 1910s. In 1910, by the Japanese imperial rule, the regulations on Local Confucian School(Hyanggyo) property were enacted, and the income was paid solely to elementary school education expenses and ancestral rites. Through this process, many Local Confucian School(Hyanggyo) buildings were destroyed while only the space for ritual sacrifices remained by the Japanese colonial rule. In particular, as the land, which was the basis of Local Confucian School's property, was sold for various reasons, the finances gradually deteriorated. In addition, as the architectural acts that Local Confucian School preserves itself are restricted, it loses its original character. This study was of great significance that identified the intention to dispose of Local Confucian School(Hyanggyo) property by Japanese imperialism in the 1910s and clarified the purpose of its disposal.

As the spread of new and renewable power generation facilities, the fixed investment cost CAPEX(Capital Expenditure) of solar power generation facilities decreases due to continuous technological development, and the impact of O&M costs that determine investment success has increased. For this reason, the importance of technologies such as accuracy of O&M cost calculation through ICT, failure prediction, and predictive maintenance have emerged. In the above paper, based on the cost-breakdown structure design and failure rate model design of the solar power generation facility using engineering estimation method, the maintenance cost of the solar power generation facility, which is a renewable power generation facility, is predicted and the maintenance cost used was compared and confirmed. In addition, the cost-breakdown structure and failure rate model of solar power generation facilities were designed and developed by incorporating them into a new program of economic evaluation of new and renewable power generation facilities.

This study deals with the design of the marine antenna stabilization for an efficient 6 Degrees of Freedom(DOF) motion of a ship. Marine antenna must have abilities to target center and at the same time to stabilize the antenna dish in order to maintain its orientation toward the communication center. In order to achieve such requirements, structure stability and dynamics analysis to role to set up the simulation model. Prototype model designed and implemented into the DMU(Digital Mock Up) and MBD(Multi Body Dynamics) analysis method. Those simulation method has been carried out to stabilize the antenna under the ship motion. Simulation results show that the verification of structural stability better performance for marine antenna