검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 90

        41.
        2014.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, the odor causing in the under-fired charbroiling restaurant was reported in literature investigation,pilot test and field experimental verification. The charbroiling restaurant causes odor complaints of Neighbors soefficient reduction method is requested. Acetaldehyde, ammonia, sulfur compound and the oil mist of white smokeare found to cause odor from the charbroiling restaurant. Pilot test results show that in the removal efficiency ofodor, Electrostatic Precipitation was 67.4%, absorption was 81.2%, adsorption was 74.2% and the ElectrostaticPrecipitation & Adsorption the hybrid system with 85.7% respectively. In the same condition of the hybrid system(Electrostatic Precipitation & Adsorption), the odor removal efficiency were higher when the design parameterssuch as the discharge voltage and current were high. The process efficiency were higher when as the implanterpole was cylindrical. However, the process efficiency rapidly reduced due to the contamination of the processcomponent or material, as the operating time of the equipment is increased. Therefore, fixed maintenance and repairof the equipment is found to be are very important, for long term operation. Therefore, as the experimental resultof this study, applying hybrid system removed odors caused in under-fired charbroiling restaurant which areunregulated, is more effective device that settle civil complaints and preserve environment.
        4,200원
        42.
        2013.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Partially earth anchored (PEA) can improve the structural safety and economic feasibility of multiple span cable stayed bridge (CSB). The PEA-CSB can restrain axial compressive load acting on a tower and reduce the global buckling length of a stiffened girder. For these reasons, structural members subject to axial forces can be effectively utilized and material quantity required for a steel deck can be reduced to save construction cost. In this study, the PEA system was verified for its application on a multiple span CSB. The CSB is a four-tower multi-span bridge which has a main span length of 500 m. As high tensile stress was generated at the top of the bridge decks at the mid-span between two main columns, a hybrid deck system for enhancing the bridge deck sections was proposed. While the composite sections made of concrete and steel were used near to the main columns, steel sections were used at the mid-span between two main columns.
        4,000원
        43.
        2013.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this paper, we describe experiment results using a vibration assisted hybrid femtosecond laser (λ:795 nm) ultra- precision machining system. The hybrid system we have developed is possible that optical focal point of the femtosec- ond laser constantly and frequently within the range of PZT(piezoactuator) vibrator working distance. Using the hybrid system, We have experimented on brass and studied about differences of result of hole aspect ratio compare to general experiment setup of femtosecond laser system. Aspect ratio of a micro hole on brass is increased as 54% with 100 Hz vibration frequency and surface roughness of the side wall also improved compare to non-vibration.
        4,000원
        44.
        2012.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study proposes flexural failure design criteria of continuous slabs enhanced by a hybrid system of fiber reinforced polymer (FRP) and ultra high performance concrete (UHPC). The proposed hybrid retrofit system is designed to be placed at the top surface of the slabs for flexural strengthening of the sections in both positive and negative moment zones. The enhancing mechanisms of the proposed system for both positive and negative moment regions are presented. The neutral axis of the enhanced sections in positive moment zone at flexural failure is enforced to be in UHPC overlay for preventing the compression in FRP. From this condition, a relationship between design parameters of FRP and UHPC is established. Although the capacity of the proposed retrofit system to enhance flexural strength and ductility is confirmed through experiments of one-way RC slabs having two continuous spans, the retrofitted slabs failed in shear. To prevent this shear failure, a design criteria of flexural failure is proposed.
        4,000원
        45.
        2011.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        To meet the needs of customer, manufacturing companies are diversifying product making methods. In order to adapt to changes, companies are trying to find a new manufacturing system. In this research, MTS(Make to Stock) and MTO(Make to Order) production m
        4,000원
        46.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Ground source heat pumps are clean, energy-efficient and environment-friendly systems. Although the initial cost of ground source heat pump system is higher than that of air source heat pump, it is now widely accepted as an economical system since the installation cost can be returned within an short period of time due to its high efficiency. In the present study, performances of ground source compound hybrid heat pump system applied to a resort building are simulated. The system design and operation process appropriate for the surrounding circumstance guarantee the high benefit of the heat pump system applied to a resort building. If among several renewable energy sources, ground, river, sea, waste water source are chosen as available alternative energies are combined, COP of the system can be increased largely and hybrid heat pump system can reduced the fuel cost.
        4,000원
        47.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        분무경시스템에서 분무간격과 분무시간은 식물의 생육어l 필요한 양분과 수분을 공급하기 위한 중요한 요소들이다. 이 실험은 분무경에서 분무간격이 팔레놉시스 유묘의 생육에 미치는 영향에 대하여 알아보고자 수행되었다. 배지 없이 뿌리가 나출된 생체중 16g 크기의 유묘를 사용하였다. 분무간격은 각각 10, 20, 30, 40, 50분 간격이었으며, 분무시간은 10분이었다. 총생체중, 총건물중, 분지된 뿌리수와 상대생장률은 20분과 30분 간격에서 10분, 40분, 50분 간격보다 높았다. 특히, 뿌리의 생체중은 30분 간격에서 기장 높았다. 엽장은 30분 간격에서 길었으나, 엽폭은 처리간 차이가 없었다. 10분 간격 처리에서 유묘 한 개체가 30일간 소비한 물량은 0.71L였으며, 분무간격이 증가함에 따라 그 양은 감소하였다. 15일간 소비된 양분은 칼륨이외에는 처리간 차이가 없었으며, 칼륨은 30분 간격에서 가장 많이 흡수되었다. 결과를 요약하면, 분무경 시스템에서 팔레놉시스 유묘 생산을 위한 적정 분무간격은 30분이었다.
        4,000원
        48.
        2010.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Reliability has been considered as a one of the major design measures in various industrial and military systems. The main objective is to suggest a mathematical programming model and a hybrid parallel genetic algorithm(HPGA) for the problem that determin
        4,000원
        49.
        2009.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        아크릴폐수를 광촉매로 전처리하여 막오염인자를 최소화한 후 막조합공정에 적용하였다. 한외여과막과 정밀여과막을 역삼투막과 조합을 이루어 막조합공정을 구성하였으며 광촉매처리수를 온도 및 압력변화에 따라 막조합공정에 적용하여 분리특성을 확인하였다. 정밀여과막 모듈 혹은 한외여과막 모듈의 투과수는 역삼투모듈로 보내지며 역삼투 모듈의 최종적인 투과량은 모듈 set 2 (MWCO 200,000 UF+RO)의 역삼투 모듈이 우수하였다. UF 및 MF 모듈에서 TDS, T-N 및 COD의 제거효율은 온도 및 압력변화에 영향을 받지 않고 제거효율 또한 낮음을 알 수 있었다. 그러한 결과로 RO 모듈에서 TDS, T-N 및 COD가 우수한 제거효율을 보였다. UF 및 MF모듈에서의 탁도 제거효율은 우수한 경향(제거효율 99% 이상)을 보였다. 막조합공정에서 처리된 광촉매처리수는 배출 허용기준치를 충족하고, 재활용이 가능하였다.
        4,000원
        50.
        2009.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The hybrid cooling system of vapor compression system and naturally circulating coolin system using R-410a for indoor mobil tele-communication center(IMTC) is developed and its performance is experimentally studied. Its results are summarized as follows. First, cooling capacity of naturally circulating cooling system is proportional to indoor and outdoor temperature difference and it has max. 4,550 kcal/h at indoor and outdoor air temperature difference 15℃. Second, heat exchangers of evaporator and condenser should be designed and constructed to be able to get maximum refrigerant capacity by naturally circulating force and to enhance heat transfer by refrigerant. Third, cooling capacity of hybrid cooling system has optimum operating point according to refrigerant charging capacity and refrigerant charging capacity of naturally circulating cooling system is 30~50% more than vapor compression refrigeration system.
        4,000원
        52.
        2008.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이 논문에서는 구조물의 내진성능 향상을 위한 방법으로서 구조부재 및 수동형 감쇠기의 통합최적설계기법을 제시한다. 이는 구조부재 및 감쇠기의 최적배치를 다루는 최적화기법이다. 통합시스템의 최적설계를 위하여 다목적최적화기법을 도입하고, 이를 보다 효율적으로 다루기 위하여 목표신뢰성 제한조건을 갖는 다목적최적화문제로 재구성하였다. 수치해석 예제를 통하여 다양한Pareto 최적해를 제시하였으며, 이들이 기존 설계방법에 상응하는 순차적 설계방법 및 가중합방법에 따른 단일목적함수 최적화방법을 포괄함을 검증하였다. 여러 Pareto 최적해로부터 강성 및 감쇠장치의 사용량을 달리하는 3가지 대표설계안을 선택하고 이들의 내진성능을 다양한 지진하중에 대하여 비교 분석하였다. 이로부터 제시하는 방법이 구조물의 내진성능 향상을 위한 설계방법으로서 효율적으로 적용될 수 있을 것으로 기대된다.
        4,600원
        53.
        2008.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 지진하중하의 대형구조물의 시뮬레이션을 위해 실험과 해석을 병합한 분산공유 하이브리드 해석 및 실험소프트웨어 framework를 개발하였다. 제안된 소프트웨어 framework은 별도의 동적 그리고 정적 해석을 위한 프로그램의 개발이 필요 없기 때문에 일반 범용 유한요소해석 프로그램을 개발된 해석 및 실험 제어 프로그램과 interface API를 이용하여 사용할 수 있는 장점이 있다. 본 논문에서 개발된 소프트웨어 framework은 독자적 기능을 가진 module로 구성이 되어 있을 뿐만 아니라 개체지향형 프로그램 개념을 바탕으로 개발되었다. 예제를 통하여 개발된 시스템의 기능과 분산공유하이브리드 해석 및 실험에서의 유용성을 증명하였다.
        4,500원
        54.
        2007.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 건물모델만을 물리적인 실험체로 이용하여 동적 지반강성을 갖는 지반-구조물계의 동적거동을 모사하기 위한 하이브리드 진동대 실험법을 제안하고 이를 실험적으로 검증하였다. 본 연구에서 제안되는 실험방법은 상부구조물과 진동대의 가속도를 계측하여 진동대 제어기로 피드백하고, 전체 지반-구조물계의 동적거동을 묘사하기 위해 요구되는 기초부분의 절대가속도 응답(가속도 피드백 방법) 또는 절대속도 응답(속도 피드백 방법)을 계산하여 진동대를 구동시키는 방법이다. 지반부분을 계산하기 위해서 이론적인 동적지반강성을 제안방법에 따라서 다르게 근사화하여 진동대 제어기에 반영함으로써 실험을 수행하였다. 기초 고정계 모델에 대한 실험으로부터 계측된 응답과 본 논문에서 가정한 지반-구조물 계에 대한 실험으로부터 측정된 응답을 비교하고, 진동대 제어기에 반영한 동적지반강성과 실험데이터를 이용하여 식별된 동적지반강성을 비교함으로써 본 논문에서 제안된 실험방법의 유효성을 검증하였다.
        4,000원
        55.
        2007.03 구독 인증기관 무료, 개인회원 유료
        Forced vibration testing is important for correlating the mathematical model of a structure with the realone and for evaluating the performance of the real structure. There exist various techniques available for evaluating the seismic performance using dynamic and static measurements. In this paper, full scale forced vibration tests simulating earthquake response are implemented by using a hybrid mass damper. The finite element(FE) model of the structure was analytically constructed using ANSYS and the model was updated using the results experimentally measured by the forced vibration test. System identification of real-scaled 5 story building structure which is located in UNISON INC. is conducted on the updated FE model.
        4,000원
        56.
        2006.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
          We analyze a voice/data integrated traffic model of the cellular mobile communication system with hybrid guard channels for voice and handoff calls. In a multi-service integrated wireless environment, quality of service guarantee is crucial for smooth t
        4,000원
        57.
        2006.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이 논문에서 소개되는 실시간 하이브리드 실험 시스템은 유사동적실험법을 근거로 하고 있으며, 실제 실험과수학적 모델을 이용한 수치해석을 결합한 실험법이다. 이 시스템은 종래의 유사동적해석법에 비해 지진하중을 받는 구조물의 실시간 반응에 근접하는 현저히 높은 하중재하 속도를 고려할 수 있도록 설계되었다. 또한 다자유도 구조물에 대해 안정적인 해석환경을 제공하기 위해 이 시스템은 implicit 시간적분법을 이용하여 수치해석을 수행한다. 이 논문은 연구를 통해 개발된 시스템의 전반적인 개요와 구성요소 그리고 이 시스템에서 사용하는 수치 해석법의 성능을 평가하기 위해 수행된 수치해석을 소개한다. 연구 결과 개발된 시스템에 적용된 수치해석법은 성능이 매우 우수하다는 것이 증명되었다.
        4,000원
        58.
        2005.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 지진하중을 받는 사장교에 납고무받침과 유압식 가력기를 결합한 복합제어 시스템을 적용하였다. 복합제어 시스템은 다중의 제어장치로 인해 제어성능의 향상을 기대할 수 있지만 추가적으로 사용되는 능동제어 장치로 인하여 전체 제어시스템의 강인성이 저하될 수 있다. 따라서 본 연구에서는 복합제어 시스템의 강인성을 향상시키기 위해 기존의 LQG 알고리즘에 납고무받침의 응답에 따른 on-off 형태의 알고리즘을 결합하였다. 수치해석 결과 on-off 형태의 LQG 알고리즘을 사용한 복합제어 시스템은 납고무받침을 사용할 수동제어 시스템이나 유압식 가력기만을 사용한 능동제어 시스템과 비슷한 최대제어력이나 평균제어력을 사용하면서 제어성능이 향상되었으며, 기존의 성능에 초점을 둔 LQG 알고리즘만을 사용한 복합제어 시스템과 유사한 제어성능을 나타냈다. 또한 제안된 제어시스템은 구조물의 강성행렬에 교란이 있을 때 기존의 LQG 알고리즘만을 사용한 복합제어 시스템에 비해 강인성이 향상되었으며 교란된 시스템에 대해 불안정성을 보이지 않았다. 제안된 제어시스템은 설계지진뿐만 아니라 다른 입력지진에 대해서도 제어성능을 유지하였다. 따라서 On-Off 형태의 LQG 알고리즘을 사용한 복합제어 시스템은 불확실성이 많은 지진하중을 받는 사장교에 개선된 제어기법으로 제안될 수 있다.
        5,100원
        59.
        2005.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The previous research has been mainly focused on individual technology of voice recognition, voice synthesis, translation, and bone transmission technical. Recently, commercial models have been produced using aforementioned technologies. In this research,
        4,000원
        60.
        2005.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The Space structures may have large freedom in scale and form. And especially Hybrid structures are received much attention from the view points of their light weight and aesthetics. Hybrid systems are stable structures which are reticulated spatial structures composed of compressive straight members, struts and cables and Membranes. In this paper, The Hybrid Unit System are suggested using the Membrane and Cable elements based on the Tensegrity Unit system. Also, The Hybrid System of double-layered single curvature is presented. We analyze the force density method allowing form-finding for Tensegrity systems. And We analyze the shape analysis by the LARSH which is the program for nonlinear analysis.
        4,000원
        1 2 3 4 5