Background: Trunk flexor-extensor muscles’ co-activation and upright posture are important for spinal stability. Abdominal bracing and maximal expiration are being used as exercises to excel torso co-contraction. However, no study has on comparison of the effect of this exercise on multifidus in the upright sitting posture. Objectives: This study aims to verify the effectiveness of abdominal bracing and expiration maneuvers in lumbo-pelvic upright sitting. Design: Cross-sectional study. Methods: Eighteen healthy women were recruited for this study. The multifidus muscle thickness of all subjects was measured in three sitting conditions (lumbo-pelvic upright sitting, lumbo-pelvic upright sitting with abdominal bracing, and lumbo-pelvic upright sitting with maximum expiration) using ultrasound. One-way repeated measure analysis of variance was used for the evaluation. Results: Compared to lumbo-pelvic upright sitting, lumbo-pelvic upright sitting with abdominal bracing and lumbo-pelvic upright sitting with maximum expiration were associated with significantly increment of muscle thickness. There was no significant difference in muscle thickness between lumbo-pelvic upright sitting with abdominal bracing and lumbo-pelvic upright sitting with maximum expiration. Conclusion: Abdominal bracing and maximum expiration could be beneficial to increasing lumbar multifidus thickness in lumbo-pelvic upright sitting.

The present study was conducted to investigate the effect of environmental temperature and backfat thickness (BT) on the reproductive performance of lactating sows. Sixty crossbred sows were allotted to four groups in a 2×2 factorial arrangement by environmental temperature (high temperature [HT], 27.5±1.76℃; low temperature [LT], 23.3±0.89℃) and BT (<20 mm, average 17.70 mm; ≥20 mm, average 23.20 mm) from July to August 2019. Sows in the HT group experienced a greater change in BT and a lower feed intake. Losses in body weight and BT were lower in sows with <20 mm BT than in those with ≥20 mm BT. Sows with low BT had a lower weaning-to-estrus interval than sows with high BT (5.20, 4.93 d vs. 5.87, 5.60 d, respectively). Piglet survivability was lower in the HT group (90.31%) than in the LT group (94.87%). Piglet weaning weight and average daily weight gain were greater in sows with <20 mm BT (5.75 kg and 201.46 g, respectively) than in those with ≥20 mm BT (5.49 kg and 188.41 g, respectively). Sows in the HT group had higher cortisol concentrations than those in the LT group (post-farrowing: HT 7.86 μg/mL vs. LT 6.04 μg/mL; weanling: HT 5.48 μg/mL vs. LT 4.40 μg/mL). In conclusion, environmental temperature adversely influenced sow performance and cortisol levels. Moreover, sows with low BT had a greater weaning-to-estrus interval when subjected to heat stress.

Background: Recently, a new method of dysphagia rehabilitation using Kinesio taping (KT) has been attempted and demonstrated an immediate increase in the activation of the suprahyoid muscle during swallowing in healthy adults. Objectives: To investigate the effect of dysphagia rehabilitation using KT on the thickness change of the suprahyoid muscle in patients with dysphagia after stroke. Design: Two-group pre-post design. Methods: In this study, 20 patients with dysphagia after stroke were enrolled and assigned to the experimental and control groups. The experimental group applied KT to the front of the neck and repeatedly swallowed against the tension of the tape. On the other hand, the control group performed repeated swallowing without applying KT. Patients in both groups had swallowed 50 times a day/5 times a week for 4 weeks. For evaluation, the volume of the geniohyoid, mylohyoid, and digastric muscle was measured before and after the intervention using portable ultrasound equipment. Results: As a result of comparing the two groups after the intervention, the experimental group showed more volume increase in mylohyoid (P<.05) and digastric muscle (P<.05) than the control group. Conclusion: This study proved that suprahyoid muscle resistance exercise using KT is effective in increasing the volume of the suprahyoid muscle.

Load carrying capacity(LCC) can be reduced from its design value as a result of film thickness change when a journal is misaligned and some part of bearing is unintentionally translated. In this study, the numerical solution of the incompressible Reynolds equation was obtained by using the finite difference method and mass conservation algorithm (JFO boundary condition) with periodic pressure distribution in circumferential direction to analyze the change of LCC due to journal misalignment and step change of film thickness in axial direction for a journal bearing of vertical pumps. Smallest LCC in each eccentricity ratio is obtained as two angular positions are changed – an angular position where misalignment occurs, and another angular position where the axial step takes place while the degree of misalignment is fixed at 90%. Compared with the reaction force of plain journal bearing, the LCC reduced as much as 26.7% due to geometric effects of journal bearing at the eccentricity ratio of 0.9, while the step height is no higher than 0.1 times of bearing clearance.

Background: The characteristics of lateral epicondylitis (LE) are muscle strength weakness and increased common extensor tendon (CET) thickness. Ultrasonography has recently been used to evaluate tendinopathy. Diamond taping (DT) is commonly used to manage patients with LE. However, no previous studies have investigated the effects of DT on CET thickness. Objects: The aim of this study was to investigate the effects of DT applied around the lateral elbow on CET thickness, grip strength, and wrist extension force in healthy subjects. Methods: The subjects were 26 adults (13 male) in their twenties. First, the CET thickness was measured at rest. The CET thickness was measured by using ultrasonography at two points. The subjects were then instructed to perform maximal grip activities or maximal wrist extension activities before and after DT around the lateral elbow. The DT technique was applied using non-elastic tape. While the subjects performed maximal grip activities, the investigator measured the maximum grip strength (MGS) and CET thickness. Likewise, while the subjects performed maximal wrist extension activities, the investigator measured the maximum wrist extension force (MWEF) and CET thickness. Results: The MGS showed a statistically significant improvement after DT taping application in men (p < 0.05). The MWEF showed a statistically significant improvement after DT application in male (p < 0.01) and female (p < 0.05). When performing the activities, the CET thickness increased compared to that at rest. However, CET thickness didn’t show a statistically significant improvement before and after DT. Conclusion: This study shows that DT applied around the lateral elbow is effective in improving MGS and MWEF. However, it does not affect CET thickness.

Background: Bridging exercises are used to enhance the functional stability of the lumbopelvic region in clinical settings. Although most of the studies on bridging exercises have compared the complete activation of the trunk muscles, some recent studies have examined the functional stability of the trunk and the lumbopelvic region and assessed the appropriate recruitment of the local and global muscles during different task levels. Objects: The purpose of this study was to investigate the changes in muscle thickness in the transverse abdominis (TrA), internal oblique (IO), and external oblique (EO) muscles during a common bridging exercise on an unstable surface and to determine whether these changes differ based on the surface used. Methods: Twenty-five healthy young adults (8 males, 17 females) were recruited. The subjects were randomly assigned to either the exercise progression with a sling bridge group or the ball bridging exercise progression group, each with three stages of increasing difficulty. Each position was measured three times with an ultrasonic diagnostic imaging system, and the mean values were recorded for analysis. Results: No significant differences were observed between the TrA, IO, or EO muscle thickness ratios between the sling and ball exercise groups (p > 0.05). There were also no significant differences in the EO muscle thickness ratios between the tasks irrespective of whether the sling or ball was used. However, the TrA and IO thickness ratios in both groups were significantly greater during stages 2 and 3 compared to stage 1. Conclusion: The results suggest that the use of slings and balls during bridging exercises is effective in activating the deep abdominal muscles.

Background: Whole body-electromyostimulation (WB-EMS) is widely used for the rehabilitation and recovery of patients with various neuromusculoskeletal disorders. Objects: To objectively measure changes in lower extremity and abdominal muscles after sit-to-stand dynamic movement training using WB-EMS. Methods: A total of 46 healthy adults (23 experimental and 23 control subjects) performed sit-to-stand exercise; the experimental group with WB-EMS, and the control group without WB-EMS. The muscle activity of the lower extremity, and the muscle thickness of the lower extremity and abdominal muscles were measured before and after the intervention. Results: In terms of electromyographic activity, there was a significant interaction effect for the rectus femoris (RF) muscle (F=30.212, p=.000). With regards to ultrasonographic imaging, the muscle thickness of the RF muscle had a significant interaction effect at the muscle contraction ratio (F=8.071, p=.007). The deep abdominal muscles, such as the transverse abdominal (TrA) and internal oblique (IO) muscles, also showed significant interaction effects at the muscle contraction ratio (F=5.474, p=.024, F=24.151, p=.000, respectively) Conclusion: These findings suggest that WB-EMS may help to improve the muscular activity of the RF muscle, and the muscle thickness of the RF muscle and deep muscles such as the TrA and IO muscles.

Background: Cervical dysfunction is a common pathomechanical marker in individuals with forward head posture (FHP). To overcome the limitations of the isometric chin-tuck (ICT) exercise, dynamic neuromuscular stabilization (DNS), which emphasizes an entire spinal chain exercise, has recently shown promising clinical results. Objects: Purpose of this study was to compare the immediate effects between ICT and DNS techniques. Methods: 43 young subjects (mean age, 24.0±5.0 years) were recruited. Group of subjects with FHP were measured under baseline, ICT, and DNS conditions. Outcome measures included sitting height, longus colli (LC) and sternocleidomastoid (SCM) muscle thickness and LC/SCM thickness ratio. One-way repeated measures ANOVA was used to compare the continuous dependent variables among FHP, ICT, and DNS conditions at p<.016. Results: Both ICT and DNS exercise conditions yielded significantly increased LC muscle thickness, LC/SCM thickness ratio and sitting height than did FHP condition (p<.0001, respectively). Sitting height was significantly greater in DNS exercise than in the ICT exercise (p<.0001). Conclusion: The present results demonstrated that sitting height was greater in the DNS exercise than in the ICT exercise, as well as both corrective postural training exercises were effective on LC/SCM muscle balance ratio when compared with the baseline FHP condition. Therefore, it is considered that DNS exercise can be the recommended exercise for people with FHP.

In this study, the structural analysis was carried out according to the structure of lumber support. For the optimal design of the automotive lumber support, It was examined which one was most stable among three models A, B, and C. As the result of structural analysis, all three models showed the greatest deformations at the wire portion of the lumber support, and model A showed less equivalent stress and deformation compared with models B and C. As model A showed the lowest equivalent stress and deformation among all models, model A was shown to be the model with the excellent strength. This analysis established the stable design by comparing models A, B and C. Also, It is thought that this study result can be highly utilized at the seat design of real automobile.

본 연구에서는 종결정 크기, 종결정 코팅양, 수열 용액 숙성시간을 조절함으로써 분리층 두께가 제어된 모데나이트 제올라이트 분리막을 제조하고, 분리층 두께가 투과증발 물 투과유속에 미치는 영향을 90 wt.% 에탄올 수용액에서 고찰 하였다. 유성 밀을 이용해 종결정을 분쇄시켜 20~30 nm 크기의 종결정을 제조하였고, 진공여과코팅 중에 종결정 용액의 농도와 통과된 양을 바꿔주면서 코팅양을 조절하였다. 제조된 분리막은 분리층 두께가 얇을수록 더 높은 물 투과유속을 나타내었으며, 약 4 μm 두께를 갖는 분리막의 경우, 760의 높은 물/에탄올 선택도와 1.0 kg/m2h의 높은 물 투과유속을 나타내었다. 이는 나노크기 종결정을 사용하여 4 μm 두께로 분리층을 얇게 만들었기 때문으로 판단된다. 따라서 본 연구로부터 종결정의 크기와 진공여과 코팅양, 수열 용액 숙성시간을 조절하는 것은 분리 층의 두께를 효과적으로 조절할 수 있는 방법임을 알았 다. 또한, 모데나이트 제올라이트 분리층의 두께를 얇게 하는 것이 분리막의 물 투과유속을 증진시키는 중요한 방법임을 확인 하였다.

Background: Functional ankle instability (FAI) indicating a decrease in muscle strength, proprioception, neuromuscular control, balance and postural control function. Objective: To investigate the effect of jumping exercise on the supporting surface on the ankle muscle thickness, proprioceptive sensation, and balance in adults with FAI. Design: Randomized Controlled Trial. Methods: Twenty young people with FAI were randomly assigned to the unstable supporting surface jump group (N=10) and the stable supporting surface jump group (N=10). The intervention was conducted three times a week for eight weeks, and for 30 minutes per session. Trampoline was used as an unstable support surface and the stable support surface was carried out on a regular floor. The thickness of the tibialis anterior muscle and medial gastrocnemius muscle was measured by ultrasonography, and the proprioception of dorsiflexion and plantarflexion was measured using an electrogoniometer. The dynamic balance was also measured with a balance meter. Results: The the muscle thickness of the medial gastrocnemius muscle was significantly higher in the stable supporting surface jump group than in the unstable supporting surface jump group (p<.05). Furthermore, the plantar flexion proprioception and dynamic balance were significantly improved in the unstable supporting surface jump group than in the stable supporting surface jump group in the intergroup comparison (p<.05). Conclusions: The conclusion has been reached in this study that the jumping exercise on the unstable supporting surface could be a more effective in improving FAI than the regular surface.

목적 : 임신이 각막 두께에 미치는 영향에 관한 문헌들을 선별하여 연구의 특성을 파악하고 메타분석을 통해 효과 크기를 확인하였다. 방법 : 2001년 1월부터 2017년 12월까지 국내·외 데이터 베이스에서 검색어를 ‘임신’, ‘각막 두께’, ‘Pregnancy’, ‘Pregnant women’, ‘Pachymetry’, ‘Corneal thickness’하였으며, 연구 종류와 언어에 제한을 두지 않았다. 결과 : 총 7편의 문헌이 선정되었으며, 임신 전과 임신 중 각막 두께 변화에 대한 효과 크기는 1.013[95% CI: 0.743~1.282]이며, 각막 두께가 증가하는 것으로 나타났다. 임신 중과 출산 후 각막 두께 변화에 대한 효과 크기 는 -0.539[95% CI: -0.746~-0.332]이며, 각막 두께가 감소하는 것으로 나타났다. 결론 : 임신으로 인해 각막 두께에 영향을 미칠 수 있으므로 임신 전, 후 각막 두께가 변화할 수 있으므로 콘택 트렌즈 피팅 시 세심한 주의를 기울여야 할 것이다.

Background: Chronic low back pain (CLBP) causes morphological changes in muscles, reduces muscle strength, endurance and flexibility, negatively affects lumbar stability, and limits functional activity. Plank exercise strengthens core muscles, activates abdominal muscles, and improves intra-abdominal pressure to stabilize the trunk in patients with CLBP. Objects: We investigated the effect of plank exercise on abdominal muscle thickness and disability in patients with CLBP. Methods: We classified 33 subjects into 2 groups: An experimental (n1=17) and a control group (n2=16). Patients in the experimental group participated in plank exercise and those in the control group participated in stretching exercise. Patients in both groups attended 20-minute exercise sessions thrice a week for 4 weeks. Abdominal muscle thickness in each subject was evaluated ultrasonographically, and disabilities were assessed using the Oswestry disability index (ODI). Results: Four weeks later, abdominal muscle thickness showed a significant increase over baseline values in both groups (p<.05). Patients in the experimental group reported a more significant increase in the thickness of the external oblique muscle than that in the control group (p<.05). ODI scores in the experimental group were significantly lower after intervention than before intervention (p<.05). Conclusion: Plank exercise increases the thickness of the external oblique muscle and reduces disability secondary to mild CLBP. Therefore, plank exercise is needed to improve lumbar stability and functional activity in patients with mild CLBP.

Background: Temporomandibular disorder (TMD) is characterized by pain and limited range of motion in the jaw. TMD patients generally prefer to chew on the unaffected or less-affected side, and this tendency often results in asymmetries in masseter muscle thickness and range of mandibular motion. Objects: The purpose of this study was to compare the asymmetries in masseter muscle thickness and range of mandibular motion in subjects with and without temporomandibular disorders. Methods: Thirty-nine subjects were divided into two groups: A TMD group (n1=19) and a control group (n2=20). The jaw opening range and laterotrusion were measured using a digital vernier caliper. The masseter muscle thickness was examined in both the resting state and the maximal clenching state using ultrasonography. The absolute asymmetry indices calculated based on the laterotrusion and masseter muscle thickness of the respective right and left sides. A two-way ANOVA and a Mann-Whitney U test were used for statistical analysis. Results: No significant different was found in the masseter muscle thickness between the TMD and control group. A significant difference was found in the absolute asymmetry indices of mandibular laterotrusion between the TMD and control groups (p<.05). Furthermore, the ranges of jaw opening were significantly different between males and females (p<.05). The absolute asymmetry index values of masseter muscle thickness at rest and during maximal clenching were also significantly different between males and females (p<.05). Conclusion: These results demonstrated that the subjects with TMD had a larger degree of asymmetry in laterotrusion than those without TMD. Therefore, a physiotherapy program needs to be designed to restore normal laterotrusion capacities for TMD subjects. These results also showed that female subjects had greater absolute asymmetry indices in masseter muscle thickness than male subjects. Therefore, more training is needed to promote bilaterally balanced chewing among women.

목적: 굴절이상별 세 그룹으로 분류한 우리나라 아동들의 안축장과 빛간섭단층촬영(OCT)로 측정한 황반두께, 망막신경섬유층두께 사이의 상관성을 알아보고자 하였다. 방법: 안질환이 없고 안과관련 수술 경험이 없는 아동 67명(134안)을 대상으로 원시, 정시, 근시 그룹으로 분류하였다. 황반부와 망막신경섬유층두께는 Cirrus HD-OCT를 이용하여 측정하였고, 안축장은 IOL Master를 이용하여 측정하였다. 결과: 안축장은 근시, 정시, 원시그룹 순서로 길게 측정되었다(p<0.05). 중심부황반의 두께는 근시, 정시, 원시그룹 순서로 두껍게 측정되었다(p<0.05). 주변부황반부는위쪽, 코쪽, 아래쪽부분에서 근시그룹이 가장 얇았다(p<0.05).황반의 중심부 두께는 안축장과 양의 상관관계가 있었다(r=0.283, p<0.05). 주변부 황반의 두께는 모두 안축장과 음의 상관관계를 보였다. 귀쪽망막신경섬유층두께(Temporal RNFL Thickness)는 근시그룹이 가장 두꺼운 결과를 보였고,안축장과통계적으로 유의한 양의상관성이 나타났다(r=0.39, p<0.05). 위쪽과 코쪽, 아래쪽의 망막신경섬유층 두께는 안축장과 모두 음의 상관성을 나타냈다. 코쪽 부분의 두께는 통계적으로 유의하게 나타났다(r=-0.23, p<0.05). 결론: 본 연구를 통해 우리나라 소아들의 OCT로 측정한 망막의 황반부의 두께, 망막신경섬유층의 두께와 안축장은 근시의 정도가 높을수록 안축장의 길이가 더 길게 측정되었으며, 굴절이상별 세 그룹에서 나타나는 차이점을 확인하였다.

본 연구는 막 결합형 축전식 탈염공정에서의 이온교환막의 두께와 탈착간의 관계를 규명하기 위하여 진행하였다. APSf/SPEEK 양, 음이온교환고분자를 합성하여 시판되는 탄소전극에 직접 캐스팅하여 이온교환막이 결합된 탄소전극을 제조하였다. 양, 음이온교환고분자를 캐스팅 하지 않은 것, 1회 캐스팅, 2회 캐스팅한 것으로 탈착시험을 하였다. 탈착 조건은 –0.1, -0.3, -0.5, -1.0 V로 하였으며 100 mg/L의 NaCl 수용액을 공급액으로 하여 완전 흡착을 한 다음 증류수로 공급액을 변경하여 완전탈착이 될 때 까지 관찰 하였다. 이온교환막의 두께가 두꺼워질수록 완전탈착까지 걸리는 시간이 증가하였고 높은 전위의 탈착 전압에서는 막의 두께가 탈착에 그다지 큰 영향을 끼치지 않는 것을 확인하였다.

PURPOSES: A methodology using a 3D-engineering technique was developed for implementation in paving Quality Control (QC) practice in bridge overlay paving. METHODS: The as-built surface of a concrete-box-girder bridge tends to exhibit a certain level of undulation or roughness. This is usually caused by the inevitable limitation that camber prediction and construction cannot be perfectly matched. The undulation itself would not be a severe defect in a bridge structure, but it results in a challenge for achieving overlay pavement qualities such as pavement thickness and smoothness. One advantage of the 3D-engineering technique is that it allowed identification in advance, of conditions that will interfere with construction, thus preventing non-conformance qualities from being re-worked. RESULTS : Utilizing this technique, overlay paving was virtually simulated in advance, and insufficient thickness areas and rough sections were visually identified. Paving quantities were automatically computed. Paving level alternatives were correspondingly established based on analysis of the quantitative and 3D visual outputs. CONCLUSIONS: This study showed that this methodology could be successfully utilized for optimizing paving quantity and quality