검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 85

        61.
        2019.04 서비스 종료(열람 제한)
        This paper evaluates the chemical resistance of mortar according to mixing ratios by using ferronickel slag fine powder which is an industrial by - product and various admixtures. The test results showed that the chlorine ion penetration resistance was the best when the ferronickel slag fine powder and gypsum were used as the admixture. The chemical erosion resistance was highest when ferronickel slag, quicklime, gypsum and calcium chloride were combined.
        62.
        2017.12 KCI 등재 서비스 종료(열람 제한)
        In this study, the fiber blending ratio and strain rate effect on the tensile behavior of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber and polyvinyl alcohol fiber were used for reinforcing fiber. The fiber blending ratio of HSF+PVA were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, the tensile strength, strain capacity and fracture toughness of the hooked steel fiber reinforced cement composites were improved by the increase of the bond strength of the fiber and the matrix according to increase of strain rate. However, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by micro cracks in the matrix around hooked steel fiber. On the other hand, PVA fiber showed cut-off fracture at strain rate 10-6/s with multiple cracks. However, at the strain rate 101/s, the multiple cracks and strain capacity were decreased because of the pull-out fracture of PVA fiber. The HSF1.5PVA0.5 shown the highest tensile strength because the PVA fiber suppressed the micro cracks in the matrix around the hooked steel fiber and improved the pull-out resistance of hooked steel fiber. Thus, DIF of strain capacity and fracture toughness of HSF1.5PVA were greatly improved. In addition, the synergistic response of fracture toughness was positive because the tensile stress was slowly decreased after the peak stress by improvement of the pull-out resistance of hooked steel fiber at strain rate 101/s
        63.
        2017.04 KCI 등재 서비스 종료(열람 제한)
        This study was performed to develop the efficient phytoremediation model in the paddy soil contaminated with heavy metals by cultivating Pteris multifida and Artemisia princeps with different mixing ratios (1:0, 8:1, 6:1, 4:1). As a result of investigating the heavy metal accumulation of each plant per dried material (1 ㎏), content of arsenic and cadmium was the highest in aerial part of P. multifida (169.82, 1.70 ㎎·㎏-1 DW, each) among the treated group. Lead content was the highest (12.58 ㎎·㎏-1 DW) in the aerial part of P. multifida cultivated with 8:1 mixed planting. But the content of copper and zinc was the highest (33.94, 61.78 ㎎·㎏-1 DW, each) in the aerial part of A. princeps with 8:1 treatment. Regardless of heavy metals, plant uptake from the 1 ㎡ soil was the highest in 4:1 mixed planting group, which showed the best yield of A. princeps.
        64.
        2016.10 KCI 등재 서비스 종료(열람 제한)
        Cynanchum wilfordii Radix (CWR), Arctium lappa L (ALL), and Dioscorea opposite (DO) have been known to improve blood lipid profile, blood pressure, and inflammation. To find the optimal combination ratio of CWR, ALL, and DO in terms of vascular health improvement, we compared the effects of various combinations on gene expression of Vascular cell adhesion protein 1 (VCAM-1) in human aortic smooth muscle cells (HASMC). VCAM-1 mediates endothelial leukocyte adhesion and is upregulated in atherosclerosis. Cells was stimulated by TNF-α (10 ng/㎖, 2h) and treated with various combinations for 24 h. A combination (CADM5, CWR:ALL:DO = 2:1:1) showed the strongest suppression of VCAM-1 so that CADM5 was chosen for further experiments. We performed cell viability test with CADM5 (0, 3.125, 12.5, 25, 50, and 100 ㎍/㎖) and no cytotoxicity was found. We also investigated the effect of CADM5 on protein expression of VCAM-1, ICAM-1, Nrf-2, and HO-1 using western blotting. We found that CADM5 diminished the expression of VCAM-1 and increased the expression of Nrf-2 and HO-1. Therefore, we concluded that CADM5 (CWR:ALL:DO = 2:1:1) effectively improves vascular health by regulating the expression of VCAM-1.
        65.
        2016.05 KCI 등재 서비스 종료(열람 제한)
        For electrolysis process using an insoluble electrode, electrochemical performance was greatly affected by the manufacturing method and procedure, such as the firing temperature, pre-treatment, type of precursor solution, coating method, electrode material, etc. Components of the electrode therein is one of the most important factors in electrochemical reaction. To achieve such characteristics, a appropriate ratio of the electrode material should be carefully chosen. The aim of this research was to apply experimental design method in the optimization of electrode component for the maximum generation of oxidants in electrochemical oxidation process. Mixture design, especially expanded simplex lattice design, in DOME (design of mixture experiments) with Design Expert - commercial software - was used to analyze the data. Analysis of variance (ANOVA) showed a high coefficient of determination (R2) value of 0.9470, thus ensuring a satisfactory adjustment of the 3rd order special cubic regression model with the experimental data. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the TRO generation concentration and independent variables(mol ratio of 3 electrode components) in a real unit: TRO generation concentration (mg/L) = TRO conc. = 98.25×[Ir] + 49.71×[Sn] + 95.29×[Sb] 16.91×[Ir]×[Sn] - 29.47×[Ir]×[Sb] 22.65×[Sn]×[Sb] + 703.19 ×[Ir]×[Sn]×[Sb]. The optimized formulation of the 3 component electrode for an high TRO (total residual oxidants) generation was acquired at mol ratio of Ir 0.406, Sn 0.210, Sb 0.384 (desirability d value, 1).
        66.
        2015.11 서비스 종료(열람 제한)
        폐바이오매스를 이용하여 Bio-SRF로 활용을 위해 제시되고 있는 반탄화(Torrefaction) 기술은 대표적인 신재생에너지 활용 방안으로, 원료의 공급 안정성 및 제한적 처리 방법으로 인해 각광받고 있다. 일찍부터 해외에서는 반탄화 기술을 통해 생성된 탄화물의 높은 적용성을 인지하여 상용규모의 기술 개발이 활성화 되어 있으며, 주로 활용 가능한 폐바이오매스가 많이 발생되는 유럽 및 북미 지역에서 활발하게 수행되고 있다. 반면 국내에서는 기존 폐바이오매스는 매립 위주로 처리되어오고 있으며, 최근에서야 폐바이오매스의 자원 인식 전환을 통해 적극적으로 기술개발사업에 노력을 기울이고 있는 추세이다. 이러한 생산된 반탄화물은 소수성 및 낮은 함수율로 인해 운송 용이성 확대와 더불어 고정탄소 성분의 증가에 따른 높은 에너지 밀도로 석탄발전 설비에서의 혼합 연소를 통한 활용이 기대되고 있다. 반탄화물은 무산소 조건 상에서 200~300℃의 반응 온도 영역에서 열분해 과정 중 폐바이오매스 내 함유된 수분 및 휘발분 제거를 통해 얻을 수 있다. 반면에 국내에서 시행되고 있는 Bio-SRF 기준은 탄화물을 에너지원으로 활용하는 측면에서 엄격하게 다뤄져 적용 가능한 폐바이오매스 종류가 한정적이다. 이러한 배경은 원료로 사용되고 있는 폐바이오매스 종류별 함유하고 있는 염소, 황분 및 회분 함량이 다양하며, 이러한 성분들은 향후 반탄화물이 적용 될 소각 및 가스화 시스템 내부 부식 등에 따른 연속운전 저해 요소로 작용이 가능하기 때문이다. 따라서 본 연구에서는 적용범위가 제한적인 폐바이오매스를 활용하여 Bio-SRF 규격을 충족시키는 반탄화물을 생산하기 위해 다수의 폐바이오매스의 혼합비율에 따른 반탄화물 특성을 검토하였다. 대상 원료로, 폐목재와 고품질 하수슬러지 및 저품질 하수슬러지별 반응 온도 및 반응 시간에 따라 생산된 반탄화물 특성 실험결과를 이용하여 Bio-SRF 기준을 충족시키는 원료의 최적 혼합비율을 도출하였다. 저품질 하수슬러지와 폐목재를 활용할 경우 습윤 기준 하수슬러지 60% 및 폐목재 40% 의 혼합비율이, 고품질 하수슬러지의 경우 습윤기준 하수슬러지 80% 및 폐목재 20%가 최적조건으로 도출되었다. 본 연구를 통해 처리 방법이 제한적인 폐바이오매스를 이용한 반탄화물 생산이 가능할 것으로 기대되며, 향후 폐바이오매스의 대상 범위를 확대를 통해 혼합 폐바이오매스를 이용한 반탄화물 기술 개발에 중요한 가이드라인으로 제시될 것으로 사료된다.
        67.
        2015.11 서비스 종료(열람 제한)
        바이오매스는 산업혁명을 거치며 전 세계적으로 화석연료가 이용되기 시작한 이후에도 여전히 중요한 에너지원의 일부를 차지해 왔다. 이는 탄소 중립적인 연료로써 적절한 활용을 통해 지구 온난화 문제해결의 중요한 대안의 하나이며, 신재생연료로 활용가치가 매우 크다고 평가받고 있다. 또한 현대 문명이 만들어낸 혁신적인 제품으로서 20세기를 주도하는 기술 중 하나인 플라스틱은 생산과 소비가 증가함에 따라 빚어진 부산물로 폐플라스틱의 소각 처리 시 높은 발열량과 제 2차 오염물질 발생 등으로 인해 심각한 환경오염 문제를 일으키는 요인으로 알려져 있다. 따라서 목재 및 플라스틱의 재활용에 대한 필요성이 대두됨에 따라 이들 혼합연료를 에너지원으로 사용하기 위한 연구가 선행되어져 있으나 그 중에서도 바이오매스량 산정에 대한 방법과 기초데이터는 부족한 실정이다. 본 연구에서는 목질계 바이오매스인 목재와 PE를 혼합 목재의 함량을(100%, 80%, 50%, 30%, 10%, 0%)한 연료를 실험실의 반응로에서 연소시켜 배출되는 가스를 포집하여 배출 가스 내의 바이오매스 함량을 가속기질량분석법 (AMS: Accelerator Mass Spectrometry)를 통해 분석하였다. 또한 목재와 PE을 혼합한 고체 연료를 용해선별법(SDM: Selective Dissolution Method)을 통해 고체 혼합연료 내의 바이오매스 함량을 분석하였다. 분석한 결과 연소 후 배출가스를 통한 AMS분석은 목재를 100%, 80, 50, 30, 10, 0의 비율로 연소시켰을 때 결과 값이 100%, 73, 40, 22, 9, 2의 바이오탄소 함량 결과를 얻었으며, 고체연료의 SDM을 통해서는 목재가 100%, 80, 50, 30, 10, 0의 비율로 혼합되었을 때 99%, 74, 44, 27, 9, 1의 바이오매스 함량 결과를 얻었다. 목재와 PE의 바이오매스 함량은 일반적으로 100%와 0% 이나 목재 중의 이물질이 포함되어 있고, PE의 경우 순수한 원료가 아닌 농촌폐비닐을 재활용한 재생 PE제품으로 이에 따른 바이오매스 함량이 변화가 있음을 알 수 있었다. 또한 연료의 혼합 비율에 따라 바이오매스가 포함 되어있고, 연소 후 배출가스 속의 바이오탄소 함량이 고체 연료의 바이오매스 함량과 비교하였을 때 오차가 5%이내 임을 알 수 있었다.
        68.
        2015.06 KCI 등재 서비스 종료(열람 제한)
        In this study, the authors applied a modified SRF product quality based on a mix of disposable plastic bags and bulky waste to estimate the mixing ratio which can be the energy efficiency of coal for fuel. This study was performed to find physical properties of bulky wasteand element analysis for the mixd disposable plastic bag. Also, SRF (solid recovery fuel) was tested to figure out, physicochemical properties by standard method. As the results, the physical properties of bulky waste shows 89.6% of wood. Then the author measured disposal plastic bag as follows : [3 : 7], [5 : 5], [7 : 3] quality criteria by the mixing ratio of bulky waste. The low calorific value was proportionally increased whenever the mixing ratio of disposable plastic bag was increased. Therefore, the author can surmise that the mixing ratio between bulky waste and disposable plastic bag was [6 : 4]. It shows 5,950 kcal / kg value as much as coal fuel.
        71.
        2014.10 서비스 종료(열람 제한)
        In this study, the hydration characteristics in winter of low heat concrete with respect to the binder type are investigated experimentally. According to the research results, TBC1(Ternary Blended Cement) applied low heat concrete, the heat of hydration was found to be reduced and the 28 days compressive strength was superior to that of other TBC mixes.
        72.
        2013.10 KCI 등재 서비스 종료(열람 제한)
        본 연구는 복분자 미숙과 추출물과 황기 뿌리 추출물로 이루어진 혼합물의 다양한 혼합비율을 이용하여 조골세포의 증식과 활성변화를 확인하고, ALP 활성 및 osteocalcin의 분리량 측정을 통하여 복분자 추출물과 황기추출물의 최적혼합비율을 결정한 것이다. 구체적으로는 각 혼합비율(복분자:황기=1:9, 2:8, 3:7, 4:6, 5:5, 6:4, 7:3, 8:2, 9:1)에 따른 혼합물을 MG-63 조골세포에 처리하여 세포의 증식과, 분화마커 ALP의 활성 및 osteocalcin 분비량을 측정함으로써 골다공증 치료에 유용한 복분자 추출물과 황기추출물의 혼합비율을 7:3으로 최적화하였다. 혼합비율 0:0에서 조골세포증식이, 혼합비율 72:28이 세포 내 ALP 활성 증가를, 68:32이 세포 내 osteocalcin의 분비가 가장 높게 나타났다. 이러한 결과는 7:3의 혼합물이 항골다공증 효과에 우수한 결과가 있을 가능성을 나타내며, 특히 조골세포의 활성화 촉진으로 인해 골파괴 진행을 억제하는 효과, 즉 병의 진행을 지연시키는 작용기전이 아니라 골을 다시 형성해줄 수 있는 긍정적 효능에 대한 가능성을 제공한다. 이에 본 연구결과를 바탕으로 본 연구결과에 의해서 제공되는 최적혼합비율의 혼합물에 대한 골다공증 예방 및 치료에 대한 임상실험과 그 작용기전에 대한 연구가 더욱 진행되어야 할 것으로 보인다.
        73.
        2013.10 서비스 종료(열람 제한)
        Concrete shrinkage is happened due to the cement hydration and water evaporation from early ages, and it induces crack of concrete. In this study, the crack resistance of remicon latex-modified concrete was compared with latex and admixture ratio. From the results, if admixture ratio is constant, cracking is delayed when the latex ratio is increased.
        74.
        2012.10 KCI 등재 SCOPUS 서비스 종료(열람 제한)
        The physiochemical characteristics and sensory properties of the Samgyetang herb to which different dried medicinal herbs were added were investigated to find the best formulation for the product. For the Samgyetang herbal product, Schizandra chinensis, Atractylodes lancea, Glycyrrhiza uralensis, and Zizyphus jujube were used at a fixed ratio in the formulation, and Paeonia lactiflora (PL), Codonopsis lanceolata (CL), and Scutellaria baicalensis (SB) were added, with different amounts. The pH of Samgyetang increased along with the SB amount, and the soluble-solid content increased along with the CL amount. S7, which had the highest SB addition level, had the highest L value, and the b values were the highest in S7, which had the highest SB addition level. In the sensory evaluation, S7, which had the highest amount of SB, had the highest score in flavor, taste, and overall acceptability. In conclusion, the best formulation for Samgyetang would include PL 8 g, CL 4 g, SB 12 g, Schizandra chinensis 6 g, Atractylodes lancea 4 g, Glycyrrhiza uralensis 2 g, and Zizyphus jujube 4 g.
        1 2 3 4 5