검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 102

        61.
        2005.05 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to attempt a Analysis of a pointed-end Equipment Arm Safety-Accident for Fault Tree Analysis. Three major techniques were used first problem is Z-Model by which accident Analysis & prevention of a pointed-end Industry can be made, Fault Tree Analysis(FTA) bywhich quantification of a pointed-end Equipment accident Analysis can be made it 5 years in past and the third, manual-written by which minimal cut set to accident can be Identified. A example has been made of issue point a pointed-end Equipment that the Arm in loader happen to Injuries. According to the Analysis lack of safety knowledge, unsafety-behavior seem to be the primal cause of accident. Comparision of the accident cause to actual report demonstratesthat the FTA a efficient tool for Industrial Accident prevention.
        4,300원
        63.
        2004.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The condition of the manufacturing process in a factory should be diagnosed and maintained efficiently because any unexpected disorder in the process will be reason to decrease the efficiency of the overall system. However, if an expert experienced in this system leaves, there will be a problem for the efficient process diagnosis and maintenance, because disorder diagnosis within the process is normally dependent on the expert's experience. This paper suggests a process diagnosis using data mining based on the collected data from the coil-spring manufacturing process. The rules are generated for the relations between the attributes of the process and the output class of the product using a decision tree after selecting the effective attributes. Using the generated rules from decision tree, the condition of the current process is diagnosed and the possible maintenance actions are identified to correct any abnormal condition. Then, the appropriate maintenance action is recommended using the decision network.
        4,200원
        64.
        2003.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        1978년에 규모 5.0의 지진이 발생한 홍성지역에 발달한 단층대의 전기, 전자적 특성을 조사하였다. 전기, 전자 탐사는 최근 토목공사현장에서 단층대 및 파쇄대 등의 연약지반을 확인하기 위한 수단으로 널리 쓰이고 있으며 이들 탐사로부터 얻어지는 전기비저항 구조는 연약대의 공간적 분포를 효과적으로 파악할 수 있는 정보를 제공한다. 홍성지역에 위치한 단층대를 가로질러 쌍극자배열 전기비저항탐사와 MT (Magnetotelluric) 탐사를 실시하였으며 역산을 통해 단층대의 전기비저항의 분포를 추정하였다. MT 탐사는 주단층대를 가로지르는 2.9 km의 측선상의 18측점에서 실시하였으며, 자기쌍극자를 인공 송신원으로 사용하였다 전기탐사는 단층대를 측선의 중앙으로 하여 전극간격이 50 m인 쌍극자배열전기비저항 탐사를 실시하였다. 두 탐사 결과는 예상단층선을 따라 좌우지역의 전기비저항이 서로 다른 양상으로 발달하고 있음을 보여주고 있으며, 특히 예상단층선을 따라서는 뚜렷한 저비저항대가 깊게 발달해 있음을 보여주고 있다. 홍성지역의 단층대에서 낮은 전기비저항분포를 보이는 부분이 수직으로 잘 발달해 있다는 것은 최근에 두 차례의 지진이 발생한 것처럼 이 지역 단층이 활동 중인 단층이라는 사실과 일치하는 결과를 보여주는 것이다. 본 연구 성과는 앞으로 홍성단층 뿐만이 아니라 우리나라에서 발생하는 지진들에 대한 연구에 기초 자료를 제공할 것이라 기대된다.
        4,000원
        65.
        2002.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study deals with the application of knowledge-based engineering and a methodology for the assessment & measurement of reliability, availability, maintainability, and safety of industrial systems using fault-tree representation. A fuzzy methodology for fault-tree evaluation seems to be an alternative solution to overcome the drawbacks of the conventional approach. To improve the quality of results, the membership functions must be approximated based on heuristic considerations. Conventionally, it is not always easy to obtain a system reliability for components with different individual failure probability density functions(p.d.f.), We utilize fuzzy set theory to solve the adequacy of the conventional probability in accounting and processing of built-in uncertainties in the probabilistic data. The purpose of this study is to propose the framework of knowledge-based engineering through integrating the various sources of knowledge involved in a FTA.
        4,300원
        66.
        2002.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Risk analysis is a formal deductive procedure for determining combinations of component failures and human errors that could result in the occurrence of specified undesired events at the system level. This method can be used to analyze the vast majority of industrial system reliability problems. This study deals with the application of knowledge-engineering and a methodology for the assessment & measurement of reliability, availability, maintainability, and safety of industrial systems using FTA(fault tree analysis), A fuzzy methodology for fault-tree evaluation seems to be an alternative solution to overcome the drawbacks of the conventional approach (insufficient Information concerning the relative frequencies of hazard events). To improve the quality of results, the membership functions must be approximated based on heuristic considerations, The purpose of this study is to describe the knowledge engineering approach, directed to integrate the various sources of knowledge involved in a FTA.
        4,200원
        67.
        2001.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        1997년 12월 이후 남한 중부지역에서 방생한 지진 중 13개 지진에 대하여, 지역에 따라 5개 그룹으로 구분하여 P 파 극성을 이용하여 구한 복합단층면해와 P, S파 극성 및 진폭비(SV/P, SH/P, SV/SH)를 이용하여 구한 결과를 비교 해석하였다. 지진원에서의 단층운동은 NNE-SSW와 WNW-ESE 방향의 단층면을 나타내며 주향이동 혹은 역단층성 주향이동운동이 우세하게 나타났다. 단층운동에 작용한 주압축응력방향은 ENE-WSW 방향, 혹은 NE-SW 방향을 나타내며, 이는 남한지역에 발생하는 주요 지진에 대하여 구해진 주압축 응력장 방향과 거의 일치한다.
        4,000원
        68.
        2001.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Today, facilities are composed of many complex components or parts. Because of this characteristics, the frequency of failures is decreasing, but the strength of failures is increasing; therefore, the failure analysis about many complex components or parts was needed. In the former research about Fault Tree Analysis, failure data of similar facilities have been used for forecasting about target system or components, but in case that the system or components for forecasting failure is new or qualitative and quantitative data are given simultaneously, there are many difficulty in using Fault Tree Analysis with this incorrect failure data. Therefore, this paper deal with the Fault Tree Analysis method which be applied with Fuzzy theory in above case. In case that , therefore, if there is no the correct failure data, it is represented a system or components as qualitative variable. subsequently, it converted to the quantitative value using fuzzy theory, and the values used as the value for failure forecast.
        4,000원
        70.
        2000.11 구독 인증기관 무료, 개인회원 유료
        지금까지 고장예측에 관한 연구 논문들은 여러 분야에서 많이 다루어져 왔다. 그 대표적인 예측 방법 중에 하나인 FTA(Fault Tree Analysis)가 가장 많이 사용되어져 왔으며, 여러 산업분야에서 가장 활발하게 시스템 및 부품에 대한 고장 가능성 진단을 실시하여 왔다. 하지만 기존의 전통적인 FTA 방법을 사용하는데 있어서 몇 가지 문제점을 발견할 수가 있었다. 즉, 지금까지 FTA를 실시하는 과정에 있어서 시스템 및 부품에 대한 데이터의 자료가 정확하다는 전제하에 고장 값을 예측하여 왔다. 만일 시스템 및 부품에 대한 불확실한 데이터나 부정확한 자료를 동시에 가지고 있다면 지금까지 사용하여 왔던 전통적인 FTA를 사용하여 고장 값을 예측하여 정확한 값을 찾아내기란 어려운 것이라 할 수가 있다. 이와 같은 문제점을 해결하기 위해서는 본 연구에서 제시하는 Fuzzy FTA를 사용하는 것이 보다 바람직할 것이며, 이러한 방법을 사용하여 불확실하고 부정확한 데이터를 가지고 고장진단을 실시하여 고장가능성 값을 찾아내어 전체 시스템의 고장 발생 가능성을 예측하는 것이 이 논문의 목적이라 할 수가 있다.
        4,000원
        71.
        2000.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study deals with the application of knowledge engineering and a methodology for the assessment and measurement of reliability, availability, maintainability, and safety of industrial systems using fault-tree representation. A fuzzy methodology for fault-tree evaluation seems to be an alternative solution to overcome the drawbacks of the conventional approach (insufficient information concerning the relative frequence of hazard events). To improve the quality of results, the membership functions must be approximated based on heuristic considerations. The purpose of this study is to describe the knowledge engineering approach, directed to integrate the various sources of knowledge involved in a FTA.
        4,000원
        72.
        2000.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        단층에 근접한 지진동에 대하여 성능이 저하되는 단자유도계의 변위응답에 대하여 연구하였다 5% 의 감쇠비를 갖는 세단계의 성능저하시스템을 5개의 단층에 근접한 지진동에 대하여 해석하였다 해석결과로부터 성능저하시스템의 비탄성 변위응답은 비저하시스템에 비하여 큰 값을 나타냄을 알 수 있었다 또한 성능저하 특성이 증가할수록 변위응답은 커지는 경향이 있다 이러한 변위증폭은 구조물의 고유주기 강도와 성능저하특성에 영향을 받으며 짧은 주기영역에서는 큰 값을 나타내며 긴 주기영역에서는 변위증폭이 거의 발생하지 않는다 단층에 근접한 각각의 지진동에 대한 변위증폭의 최대값은 1초 보다 작은 주기영역에서 비저하시스템의 4배 정도이다 변위증폭계수의 평균값은 짧은 주기영역에서는 2의 값을 가지면 구조물의 고유주기가 길어질수록 1에 수렴해 감을 알 수 있었다. Q
        4,300원
        73.
        2000.05 구독 인증기관 무료, 개인회원 유료
        This study deals with the application of knowledge-engineering and a methodology for the assessment & measurement of reliability, availability, maintainability, and safety of industrial systems using fault-tree representation. A fuzzy methodology for fault-tree evaluation seems to be an alternative solution to overcome the drawbacks of the conventional approach(insufficient information concerning the relative frequences of hazard events). To improve the quality of results, the membership functions must be approximated based on heuristic considerations. The purpose of this Is to describe the knowlwdge engineering approach, directed to integrate the various sources of knowledge involved in a FTA.
        4,000원
        74.
        2000.01 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The fault diagnosis is a systematic and unified method to find based on the observing data resulting in noises. This paper presents the fault prediction and diagnosis using fuzzy expert system technique to manipulate the uncertainties efficiently in predi
        4,200원
        77.
        1999.11 구독 인증기관 무료, 개인회원 유료
        플랜트 및 설비가 대규모, 정교화, 복잡화 될수록 이로 인한 고장 및 오류에 의한 피해가 막대하기 때문에, 시스템의 신뢰성, 보전성 및 안전성 향상과 제품 품질 향상을 추구 및 안전성 유지에 대한 관심이 고조되고 있다. 고장진단은 잠재적으로 노이즈를 가지고 있다고 생각되는 데이터의 해석에 근거하여 시스템의 고장을 찾는 일련의 체계적이고 통합된 방법이다. 그러나 대부분의 방법들이 이진 논리에 기초를 둔 추론으로 불확실성을 제대로 결과에 반영하지 못하고 있다. 본 논문에서는 예방정비의 관점에서 시스템에 내재된 다양한 불확실성을 효율적으로 처리하기 위해 전문가의 직관과 경험등을 기초로 하여 언어학적 변량을 취하고, 이를 퍼지 기법을 이용하여 정량화 함으로써 불확실성을 고려한 판단이 가능하게 하는 퍼지 전문가 시스템을 제안한다.
        4,500원
        78.
        1998.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        한반도 동남부에 위치하고 있는 동래단층은 단일 불연속면 단층이 아니라 수많은 소단층을 포함하는 단층대의 형태를 보여준다. 동래단층의 고응력을 해석하기 위하여 부산시 금정구에서 울산시에 이르는 단층 주변의 노두에서 329개의 소단층 자료를 측정하였다 먼저 수집된 솬층 자료의 기하학적인 특징을 살펴보면 주향은 NE계열(N10E, N30E, N70E) 이 우세하며 경사의 경우는 65。 이상의 곡각의 단층이 우세하게 분포한다. 그리고 선주각의 경우는 30。이하가 전체의 절반 이상을 차지한다. 동래단층의 고응력을 해석하기 위해서 수집된 자료를 Angelier의 집적연산 방법과 Choi의 방법을 병행하여 실시하였다 그 결과 동래단측 지역에서 확인된 지구조 사건은 (1) NNE-SSW 압축응력 및 ESE-WNW 인장응력 (사건 1) (2) NNE-SSW 인장응력 (사건II)(3) ESE-WNW 인장응력 (사건III) (4) ENE-WSW 압축응력 및 NNW-SSE 인자응력(사건V) 이다. 이들 지구조 사건에 따른 동래단층 운동을 살펴보면 먼저 사건 I에 의해서 동래단층 지역에 우수감가의 NS주향 좌수 감각의 ENE-WSW 가지는 주향이동성 단층들이 형성되었고 이후 사건 II, III에의해서 정단층성 단층들이 발달되고 사건 IV에 의해서 NNE 주향의 동래단층이 우수 주향이동운동으로 길게 연장 발달한 것으로 추정된다.
        4,300원
        79.
        1990.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In order to facilitate correct understanding for active fault which is widely used to be future destructive earthquake source, defination, criteria of identification, characteristics, and estimation for active fault are reviewed. Typical examples for correlations between active fault and seismicity are also presented. An optimum strategy to identify active fault and make clear the relation between seismicity and mapped faults in the Korean Peninsula are proposed.
        4,000원
        80.
        1990.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        4,000원
        1 2 3 4 5