In this study, We evaluated the impact resistance of structural member using high performance fiber reinforced cementitous composite according to compressive strength. As the compressive strength of structural member using HPFRCC increased, the deflection of the structural member decreased. The highest resistance of deflection occurred at 180 MPa HPFRCC.

이 논문의 목적은 압축강도 130 MPa급의 고강도 강섬유 보강 콘크리트 보의 휨거동 특성을 파악하는데 있다. 부피비 1.0%의 강섬 유와 철근비 0.02 이하의 철근으로 보강된 고강도 강섬유 보강 콘크리트의 휨거동 특성 실험결과를 제시하였다. 일반강도철근과 고강도철근 을 실험 부재에 사용하였다. 강섬유 보강 콘크리트의 압축 및 인장거동 재료 실험과 모델링을 수행하였다. 강섬유 보강 콘크리트의 하중-균열 개구변위 실험결과를 반영하여 가상균열모델에 근거한 역해석을 통해 인장거동모델링을 제시하였다. 실험결과는 강섬유 보강 콘크리트와 고 강도철근의 사용은 균열제어 및 연성 거동에 유리한 것을 나타낸다. 일반강도철근을 사용한 보의 휨강도 실험값에 대한 수치해석에 의한 예측 값의 비는 0.81~1.42를 나타내고, 고강도철근을 사용한 보의 휨강도 실험값에 대한 수치해석에 의한 예측값의 비는 0.92~1.07을 나타낸다. 수 치해석에 의한 휨강도는 실험결과를 합리적으로 예측하고 있는 것으로 판단된다.

Non-destructive test is using rebound hardness and ultrasonography generally. They generate a difference with Core compressive strength in estimation of compressive strength because they are indirectly. Therefor, Inter-rater Reliability analysis was performed to evaluate the reliability of Non-destructive Method. Reliability analysis, while there is correlation two times only between the rebound hardness method and Core compressive strength in total eight cases but ultrasonography method has six times. so ultrasonography method is more reliable than Rebound hardness method.

The purpose of this study is to evaluate the impact on flexural strength and compressive strength of the concrete, the mixing rate of the amorphous fibers.

To examine the in-place strength development of concrete of nuclear containment structures with the wall thickness of 1200 mm, mock-up wall specimens were prepared. For maturity evaluation, the temperature rise in the wall specimens owing to hydration heat of cementitious materials was also measured. The in-place strength of concrete was measured using core specimens collected at different locations of mock-up walls. Test results showed that in-place compressive strength development was 1.5 times higher than the strength measured from the standard cylinders. This indicates the maturity effect is needed to be considered in predicting the compressive strength development of concrete in mass structures.

This paper reports the test results of the floating floor system used to reduce the floor noise of apartment buildings. Recently, many soft resilient materials placing between the reinforced concrete slab and finishing mortar are used. The resilient material should not only reduce the floor impact sound vibration from the floor but also support the load on the floor. Thus, even if soft resilient materials satisfy the maximum limitation of light-weight impact sound and heavy-weight impact sound, these materials may not support the load on the floor. The experimental program involved conducting sixteen sound insulation floating floor specimens. Three main parameters were considered in the experimental investigation: resilient materials, loading location, and layers of floor. Experimental results indicated that the stiffness of resilient material significantly influenced on the structural behavior of floating floor system. In addition, the deflection of the floating concrete floor loaded at the side or coner of the specimen was greater than that of the floor loaded at the center of the specimen. However, the aerated concrete did not effect on the cracking strength of floating floor system.

In recent, high performance concrete structures can be developed using Ultra-High Performance Concrete (UHPC) which has mainly high compressive and tensile strength. Therefore, in reinforced concrete (RC) structures, it is possible to reduce structural elements and the cost of construction by reducing the amount of concrete and steel bars. This study compared and evaluated bending performances of RC and UHPC beams respectively and examined the design suitability of UHPC flexural members.

In this study, analyzed of the correlation UPVand the compressive strength of structural timber. As a result, increased of UPV in accordance with the compressive strength increases. Though more experiments, judgment to be possible to estimate the compressive strength of the structural timber with UPV

By using non-destructive inspection equipment, ultrasonic and schmidt hammer, this research performed non-destructive inspection of underwater concrete for more efficient management in underwater concrete structures. And based on instrumented rebound hardness and ultrasonic pulse velocity, we developed the underwater concrete structures-strength estimation models using artificial neural network.

본 논문은 기존 수중 콘크리트 구조물의 강도관리 및 진단기술의 중요성은 날로 증가함에 따라 개발되고 있는 ROV (Remote Control Vehicle)에 탑재될 수 있는 비파괴 검사 장비를 개발하여 콘크리트 내부의 강도측정을 하고자하였다. 수중화된 슈미트해머와 초음파센서를 통하여 수중에 있는 콘크리트 공시체의 반발경도 및 초음파속도를 계측하여 실제 압축강도 값과 비교하였으며 이를 통하여 수중에서의 강도추정식을 도출하였다. 도출된 3가지 식 중에서 반발경도와 초음파속도를 복합적으로 사용하는 복합식이 가장 정확도가 높았으며 이에 따라 실제 수중에서의 콘크리트의 강도를 추정하고자 할 때 활용 가능성도 높아질 것으로 예상된다.

In this study, rational prediction models for the effective compressive strengths of HSC corner and interior columns with intervening NSC slabs are developed. A structural analogy between HSC column-NSC slab joint and brick masonry is used to develop the prediction models. In addition, the aspect ratio of slab thickness to column dimension and the surrounding slab confinement effect are considered in the models. The proposed prediction model is verified by comparison with experimental results and various prediction expressions. As a result, with average test-to-predicted ratios of 1.00 for HSC corner columns and 1.09 for interior columns, the proposed equation provides superior predictions over all of the existing effective strength prediction approaches including KCI structural concrete design code(2012).

These days structures with ultra high strength concrete and steel are increasing because of the rising demands for high-rise buildings and long span bridges. The techniques of high strength material has been developed rapidly, as they have a lot of benefits such as the reduction of the amount. In this paper, we performed the basic research of practical application examples of the bridge and the structural characteristics of ultra-high-strength concrete and steel strand.

Recently, as increasing interests in Korean-style house, the government has promoted the policy that encourage constructing Korea-style house fabricated timber though the improvement of the related law and administration system. Also, the perception for historic preservation has been increased in respond to heightened interest. In this paper, External bond and Near surface mounted was used as the way to reinforce timber structure’s durability. bond strength for specimens with different bond length was investigated.

최근 초장대 교량, 초고층 빌딩 등 토목 및 건축 분야에서 초고강도 콘크리트에 대한 수요가 날로 증가추세에 있다. 특히 초고층 건축물 건립에 따른 고강도 콘크리트 사용이 증가함에 따라 화재시 폭렬현상 등 내화성능 저하에 대한 대책마련의 일환으로 설계기준강도 50MPa 이상의 고강도 콘크리트에 대하여 내화성능관리기준을 법령으로 제정하여 시행하고 있다. 이에 따라 고강도 콘크리트의 내화성능 확보를 위한 연구가 다수 진행되었지만, 100 MPa 이상의 초고강도 콘크리트에 관한 연구는 거의 전무한 실정이다. 초고강도 콘크리트의 경우 내부 조직이 고강도 콘크리트에 비해 훨씬 더 치밀하여 고강도 콘크리트에 적용되는 일반적인 내화 방안으로는 화재시 내부 수증기의 배출이 어렵다. 뿐만 아니라, 화재시 또는 화재후의 구조적 성능에도 일반적인 고강도 콘크리트와는 다른 양상을 나타낼 수 있어 이에 관한 연구가 필요하다. 따라서 본 연구에서는 화재 상황 하에서 초고강도 콘크리트 기둥이 소정의 하중을 지지할 수 있는 구조 성능의 확보 방안을 모색하고자 하였다.

In this study, experimental research was carried out to evaluate the structural performance of high strength R/C interior beam-column joints regions, with or without the shear reinforcement. Specimens designed by the interior beam-column joint regions without the shear reinforcement of existing reinforced concrete building showed a unstable mode of failure and an decrease in load-carrying capacity and energy dissipation capacity and ductility ratio.

In the case of cultural properties, each member has a cultural value and replacing of damaged wood is not easy. In addition, state of our country research for repair and reinforcement of timber are still incomplete. since 2008, research of the reinforcement method using CFRP plate has started. in this study, experiment for the adhesion strength along attachment length of surface bonded and NSM using CFRP plate. As a result, the adhesive strength is increased depend on increased of the adhesion area, measured the change of intensity according to the species of the wood.

이 연구에서는 전단하중을 받는 부유식 콘크리트 구조물 모듈 접합부의 구조거동 실험연구를 수행하였다. 모듈 접합부 전단키의 균열 양상, 전단거동 및 전단강도를 파악하였다. 전단강도의 영향을 파악하기 위해 전단키의 경사각도, 횡방향 구속응력 및 콘크리트의 압축강도 등을 실험변수로 고려하였다. 전단키의 경사각도가 증가함에 따라 접합부의 전단강도가 증가하였다. 또한, 구속응력이 증가함에 따라 전단키의 전단강도가 증가하였다. 실험변수에 따른 전단거동 실험결과를 토대로 접합부의 전단강도 평가식을 제안하였으며, 제안식에 의한 전단강도 예측값은 실험값에 근접하는 것으로 나타났다.

In this study, experimental research was carried out to study the high strength RC exterior beam-column joints regions, without the shear reinforcement, using high ductile fiber-reinforced mortar. Test results showed that specimen BCJNSP1.0 were increased th maximum load-carrying capacity and showed stable hysteresis behavior and satisfactory crack pattern in comparison with th specimen BCJNS without shear reinforcement in the beam-column joint region.

In this study, KS F 2405 was used to investigated the compressive strength of property of high performance concrete (HPC) using the fly ash and silica fume. The experiments were carried out silica fume-binder ratio from 5% (SF5) and fly ash 25%+silica fume 5% (FA25SF5). The compressive strength of HPC determined on 7days and 28days.