Gwangyang Bay, a semi-closed water channel, has habited various shellfish species and has been much influenced because of introduction from Sumjin River and sewage discharge from Gwangyang City, as well as enriched nutrients from industrial complex. We have determined the analysis of long-term monitoring data in water qualities including nutrients in Gwangyang Bay during 1987-2010, except for 1991, 1995, 1996, 1998, 2002 and 2003 of which these years do not enough water quality data to analysis in this study. In May, June, July, August, September and October were carried out the analysis of temperature, salinity, DO, transparency, SS, DIN, DIP, COD, Chl-a, and ocean climate. Temperature, salinity, DO, DIN, DIP, COD were analyzed in surface and bottom. These water parameters were showed in yearly fluctuations, in particular, salinity and DIN were a significant difference between surface and bottom based on One-way ANOVA because of intensive precipitation and irradiation in summer. However, the period of summer is the highest number of larvae in shellfish which possibly has increased their mortality because of osmotic pressure from freshwater. Higher SS and lower transparency were associated with decreasing the photosynthesis in phytoplankton, but higher Chl-a in this study was possibly contributed to more introduction of pico or nano-phytoplankton than that of commonsize phytoplankton. Consequently, it is necessary for long-term monitoring in Gwangyang Bay to produce a sustainable shellfish farming and maintain marine eco-system.

나노 소재는 표면적이 매우 크고 크기나 기공이 균일하여 분리막에서 물질 전달 통로나 특수한 기능성을 갖게 하는 소재로 이용이 가능하다. 그러나 나노 소재 및 나노 기술을 기반으로 한 분리막의 상용화를 위한 여러 가지 기술적인 한계가 존재하며 최근 나노 소재 및 제조 기술이 발전하고 다양해짐에 따라 분리막에 나노 소재 및 기술을 활용하려는 연구가 많이 진행되고 있다. 나노 소재 및 기술을 활용하는 경우 기존 분리막의 투과도 및 선택도를 크게 높일 수 있으며 열적, 화학적, 기계적 안정성 및 내오염성을 향상시키거나 기능성 소재를 활용하여 분리막에 새로운 기능을 부여할 수 있다.

새만금 지역의 담수수자원의 활용과 고부가가치 창출을 위해 새만금 담수호를 활용한 요구수질별 용수공급을 위한 최적의 수처리 시스템을 선정하고 이에 대한 비용분석을 통해 요구수질별 담수수자원의 활용 방안을 제시하고자 하였다. 다양한 수처리 기법들의 종류, 주요 특성 및 오염인자 제거효율, 공법의 장단점 등의 비교분석을 통해 수질오염인자별 유리한 처리공법을 제시하였으며, 최적의 수처리시스템을 도출하여 새만금 지역 내 요구수질별 수처리 비용을 분석하였다. 연구결과를 통해 SS(Suspended Solid), BOD(Biochemical Oxygen Demand), 탁도 제거를 위해 FDA(Filter Disinfection Adsorption)여과기, 대장균 제거를 위한 UV(Ultra-Violet)처리공정, T-P(Total Phosphorus), T-N(Total Nitrogen) 제거를 위한 FNR(Ferrous Nutrient Removal)공법, 그리고 저농도 염처리 공정을 위해 전기투석법이 유리한 공법으로 조사되어 최적의 수처리시스템의 요소기술로 각각 선정되었다. 각 요구수질별 선정된 수처리공정에 따른 비용분석과 적용사례를 제시하여 새만금지역 담수 활용도를 높이고 부족한 상수원 해결의 대안으로 적용할 수 있을 것으로 사료된다.

본 연구에서는 국내의 시설 내 작물재배에 적합한 자동관수 기술을 개발하기 위한 첫 단계로 전기저항의 변화원리를 이용하는 워터마크 센서를 장착한 소형 컨트롤러를 작물재배에 활용하여 자동관수기술의 효용성을 구명하고자 하였다. 이를 위해 비닐하우스 내에 다른 토성을 갖는 토양을 격리베드에 인공적으로 조성한 후 토마토를 정식하여 수분퍼텐셜을 -20kPa 수준으로 자동으로 조절하면서 재배하였다. 점적관수에 따른 토양 내 깊이별 수분변화는 Sentek 축전형 수분센서를 이용하여 측정하였다. 워터마크센서를 이용한 수분퍼텐셜 제어성능은 (-)20kPa 수준부근에서 유지되지 않고 반복적으로 0~(-)20kPa 대역에서 높은 변화 값을 나타내어 안정적이지 못한 것으로 나타났다. 특히, 물 공급은 관수시마다 약 50~60분 비교적 긴 시간동안 진행되어 수분공급이 과잉되는 문제가 나타났으며 건조시에도 수분퍼텐셜의 변화가 계단응답 반응의 형태로 변하는 불량한 측정해상도를 나타내었다. 이러한 문제는 워터마크센서의 토양과 전극 접촉형태가 다공컵식 수분장력계에 비해 수분값에 연속적으로 반응할 수 없는 구조이기 때문인 것으로 판단하였다. 자동관수에 따른 토양종류별 수분변화는 그 기울기가 토성별로 서로 달랐으며 양질사토의 경우 수분함량의 변화정도가 가장 높았다. 수분함량의 변화속도는 낮과 밤의 경우 시간에 따른 변화율이 달라서 변곡선의 형태를 나타내었다. 이러한 이유는 낮과 밤의 일교차와 태양광 유무에 의하여 수분증발량 차이가 발생하였기 때문인 것으로 판단하였다. 직물에서 20cm 떨어진 지점의 깊이별 수분함량은 작물에 인접한 위치와 비교하였을 때 세가지 토양 모두 관수에 의한 변화정도는 미미하여 직물에 인접한 곳만 수분공급이 효율적으로 이루어지는 것을 확인하였다. 추후 연구에서 양질사토 베드에서 관찰된 토마토 생육 불량 문제 개선과 관수멈춤 시간을 적용하여 물공급의 과잉 문제를 해결하는 보완실험이 요구되었다.

To prepare very stable acrylic type emulsion having a visible ray absorption property, in-situ preparation technique of CuxS nanoparticle was adopted. Firstly, the acylic emulsions of methyl methacrylate(MMA), butyl acrylate(BA), and acrylonitrile(AN) were synthesized by pre-emulsion polymerization at 60℃ in the presence of anionic surfactant. Secondly, CuxS nanocomposited emulsions were directly prepared in the prepolymerized acrylic emulsion with CuSO4 at 50℃. The presnce of CuxS nanoparticle in emulsion was confirmed by SEM and EDS. The final CuxS nanocomposited emulsion showed an olive-green colour and good emulsion stability up to 1 month. In addition the PET films coated with our CuxS nanocomposited emulsion absorbed effectively the visible ray.

Geopolymer is a term covering a class of synthetic aluminosilicate materials with potential use in a number of areas, but mainly as a replacement for Portland cement. In this study, geopolymers with fly ash and meta kaolin were prepared using KOH as an alkali activator and water glass. The effect of water glass on the microstructures and the compressive strength of the geopolymer was investigated. As the amount of water glass increased, the dissolved inorganic binder particles in the geopolymers increased due to polymerization, resulting in a dense microstructure. The meta kaolin-based geopolymer showed a better extent of polymerization and densification than that of the fly ash-based geopolymer. XRD data also suggested that polymerization in meta kaolin-based geopolymers should be active resulting in the formation of an amorphous phase with an increasing amount of water glass. The compressive strength of the geopolymer was also dependent on the amount of water glass. The compressive strength of the geopolymers from both fly ash and meta kaolin increased with an increasing amount of water glass because water glass improved the extent of polymerization of the inorganic binder and resulted in a dense microstructure. However, the addition of water glass to the geopolymer did not seem to be effective for the improvement of compressive strength because the meta kaolin-based geopolymer mainly consisted of a clay component. For this reason, the fly ash-based geopolymer showed a higher value of compressive strength than the meta-kaolin geopolymer.

이 연구에서는 u-w 정식화에 근거하여 일반적인 3차원 문제에 적용할 수 있는 지하수로 포화된 가로등방성 층상지반에서의 3차원 전달경계를 개발하였다. 지반 원역에서의 동적거동을 Fourier 급수로 전개하고, 각 항에 대한 동적강성을 u-w 정식화에 근거하여 유도하였다. 그리고 이를 Cartesian 좌표계에서 표현된 지반 근역의 3차원 유한요소와 결합할 수 있도록 변형하여 일반적인 3차원문제에도 적용할 수 있는 방법을 개발하였다. 개발된 방법을 강체 원형 기초의 동적거동 해석에 적용하고 기존의 해석 결과와 비교하여, 이 연구에서 개발된 전달경계가 정확함을 확인하였다. 또한 다양한 형태의 강체 기초 동적거동 해석에 개발된 전달경계를 적용하였고, 지하수로 포화된 가로등방성 층상지반에서 지하수위에 따라 강체 기초 동적거동의 변화 양상을 조사하여, 이 연구에서 개발된 방법의 활용성을 입증하였다.

This study was carried out to investigate the properties of soil and water under Double-cropping SSH followed by whole crop barley (SSFWB) or by Hairy vetch (SSFHV) in paddy land. A field study was conducted at Baeksan-myeon, Kimje, Jeonbuk province in Korea on clay loam soil for 3 years. All plots were arranged in completely randomized design with three replicates. The pH and the contents of T-N and organic matter (OM) in soil samples collected at the end of the experiment were remarkably higher t㏊n those at the beginning of the experiment in both SSFWB and SSFHV treatment (P＜0.05). The contents of an exchangeable cations at the end of the experiment were remarkably higher t㏊n those at the beginning of the experiment in both SSFWB and SSFHV (P＜0.05). And then, the concentration of NO₃-N, NH₃-N and PO₄-P in discharge and leaching water were not influenced by the cropping system

This study are carried out to investigate the effects of double cropping system, such as winter whole crop barley followed by rice (WBFR) or after Sorghum × Sudan hybrid (WBASS), in paddy land on the properties of soil and water. A field study was conducted at Baeksan-myeon, Kimje, Jeonbuk province in Korea on clay loam soil for 3 years. All plots were arranged in completely randomized design with three replicates. The pH and the contents of T-N, P₂O? and organic matter (OM) in soil samples collected at the end of the experiment were remarkably higher t㏊n those at the beginning of the experiment (P＜0.05) in both WBFR and WBASS. The contents of an exchangeable cations (CEC) at the end of the experiment were remarkably higher t㏊n those at the beginning of the experiment (P＜0.05). The concentrations of NO₃-N, NH₃-N and PO₄-P in discharge and leaching water were not influenced by the cropping system.

Ordinary concrete uses aggregate sufficiently soaked with water, and is weighed, mixed with other materials and placed in accord with performances required in the construction field. Recently special concrete with high fluidity and durability is required but it is difficult to use top-quality concrete due to lack of high-quality aggregate, delayed transportation because of traffic jam, etc. In addition, sometimes the use of a remicon is inevitable just for small-sized concrete constructions or it is difficult for a remicon to reach remote construction places such as mountainous areas. To solve these problems, this study attempted to pack concrete materials. In other words, it is to instantize concrete. This study dried aggregate, a material of concrete, and compared the change of absorption phase of the aggregate in water and in paste in order to examine the effect of the dryness of aggregate on its absorption rate and, based on the absorption rate, decided water addition ratio necessary for the reduction of unit quantity caused by the use of dry aggregate in designing concrete mixture, and analyzed the properties of unhardened concrete according to water addition ratio in manufacturing concrete using aggregate in the state of absolute dryness and in the state of surface dryness.

Treatment of water hyacinth with sulphuric acid produces carbonaceous materials that have been used to remove Cu(II) and Cd (II) ions from aqueous solutions. Untreated water hyacinth was also used for the subject of comparison. The textural properties of the carbonaceous materials were determined from nitrogen adsorption at 77 K. The optimum pH for the sorption of Cu (II) and Cd (II) ions on the investigated sorbents was determined. Dynamic adsorption measurements have been taken at 298 K whereas equilibrium measurements were carried out at 298, 313 and 323 K. The adsorption of nitrogen at 77 K on the untreated sample was too low and the surface areas of the treated samples 2, 3 and 4 were found between 70-208 m2/g. The total pore volumes of these samples which were determined for the carbonaceous materials investigated were found to be 0.076-0.140 ml/g. The kinetic adsorption data of Cu (II) and Cd(II) were applicable to both pseudo - first and pseudo-second order but fit more the latter order. The equilibrium adsorption data were found to fit Freundlich and Langmiur equations. The values of DG, DH and DS are all negative indicating the feasibility and the spontaneous nature of the sorption of Cu (II) and Cd (II) ions by the sorbents investigated.

We developed a kind of soy-based sauce for stews using three recipes and sensory evaluation processes, and examined the biological activities such as antioxidative, fibrinolytic and α-glucosidase inhibitory activities of hot water extract of Cornus officinalis S. et Z in order to use as functional ingredient. The developed stew was composed of soy sauce 1½ Tbsp, sugar 114 Tbsp, garlic, small green onion, powdered sesame and sesame seed oil ½ tsp, respectively, ginger extract 14 tsp, black pepper 18 and water ⅔C per 300 g of main ingredients(pork rib, chicken and dried pollack). It was evaluated more highly acceptable than the original recipes by sensory test. Replacement of water in the recipe of the developed stew sauce with hot water extract of Cornus officinalis S. et Z did' nt affect the sensory quality. From the above results. we concluded that hot water extract of Cornus officinalis S. et Z might be a excellent source to provide health functionality.

Co-based amorphous powder was produced by a new atomization process “Spinning Water Atomization Process (SWAP)”, having rapid super-cooling rate. The composition of the alloys was ((Co0.95Fe0.05)1-xCrx)75Si15B10 (x=0, 0.025, 0.05, 0.075). The powders became the amorphous state even if particle size was up to about 500 μm. The coercive force of powders was about 0.35 - 0.7 Oe. Furthermore, Co-based amorphous powder cores with glass binders were made by cold-pressing and sintering methods. The initial permeability of the core in the frequency range up to 100 kHz was about 110, and the core loss at 100 kHz for Bm = 0.1 T was 350 kW/m3.

Analysis of design parameters of residual treatment process at eight model water treatment plants, which were located in the four major watersheds, showed that there were large differences between those design parameters and the actual conditions. In this background, a new procedure was proposed and applied to the Chungju water treatment plant as an example of the optimum design of residual treatment process based on the characteristics of raw water. In this design example, a filter backwash recycle system consisting of a surging tank and sedimentation basin was newly proposed for more safe recycle of spent backwash water. It is expected that the design procedure proposed in this study would be estimated as a meaningful attempt to develope new design procedure for the domestic water industry.

본 실험은 작물의 양』분 흡수율에 근거하여 배추과 엽채류 수경재배에 적합한 배양액을 개발하고자 수행되었다. 원예연구소 배양액(NSH액) 1배액을 기준으로 1/2배액, 1배액, 3/2배액으로 25일간 담액 수경재배 했을 때 청경채와 겨자채는 3/2배액, 케일은 1배액에서 생육이 좋았다. 작물의 양수분 흡수율을 산정하여 얻은 평균 양이온 비는 K 49.5%, Ca 35.8%, Mg 14.7% 였으며, 배추과 작물에 적합한 배양액 N 14, P 3, K 6.8, Ca 4.8, Mg 2m·L-1을 개발하였다 개발 배양액을 평가하기 위해 2003년 9월부터 2004년 10월까지 공시 작물을 4회 재배하였다. 개발 배양액에서 작물을 재배했을 때 빠른 상대생장률과 함께 생육이 1.1~2.5배, 비타민 C 함량은 1.06~l.52배 증가하였다. 개발 배양액에 적합한 작물로는 겨자채 'Asia curled', 'Asia redcurled' 및 'Pamagreen', 케일 'TBC', 'Portugal' 및 'Manchu collard', 잎브로콜리 'New green', 천경채, 방울다다기양배추 'Green king'와 'Red king', 홍채태, 쌈추 등으로 생육과 항산화 성분인 비타민 C함량 증가를 통해 기능성 엽채류 생산이 가능하였다.

Autonomous mobile robots based on the Web have been already used in public places such as museums. There are many kinds of problems to be solved because of the limitation of Web and the dynamically changing environment. We present a methodology for intelligent mobile robot that demonstrates a certain degree of autonomy in navigation applications. In this paper, we focus on a mobile robot navigator equipped with neuro-fuzzy controller which perceives the environment, make decisions, and take actions. The neuro-fuzzy controller equipped with collision avoidance behavior and target trace behavior enables the mobile robot to navigate in dynamic environment from the start location to goal location. Most telerobotics system workable on the Web have used standard Internet techniques such as HTTP, CGI and Scripting languages. However, for mobile robot navigations, these tools have significant limitations. In our study, C# and ASP.NET are used for both the client and the server side programs because of their interactivity and quick responsibility. Two kinds of simulations are performed to verify our proposed method. Our approach is verified through computer simulations of collision avoidance and target trace.

The purpose of this study is to examine the possibilities of use as a factor of the water landscape in modern urban spaces such as parks and, apartments, through a case study of the concept, functions, and culture of moats in the East and West from ancient times to the Middle Ages. This study aimed to examine the concept, origin, and function of the moat as a theoretical consideration. Asian castles with moats, including those in Korea, China and Japan, and Western castles with moats in Britain, France, Belgium, and Germany were investigated and analyzed. By reflecting on these cultures and the functions of the moat in modern urban spaces and converting the environment damaged due to industrialization and urbanization into an eco-friendly and environment symbiotic city the quality of life can be improved, and sustainable development can be achieved. This study was conducted through a literature survey and field investigation.