An endemic plant to South Korea, Sedum zokuriense Nakai, has medical and floricultural potential and is of ecological importance. Today, many species under the genus Sedum are used as green-roofing systems, sold as ornamental plants, and studied for breeding programs. As such, optimization studies should be conducted to identify key environmental and cultivation factors that would affect their survival and vegetative growth. In this study, shading levels (50%, 65%, 80%, 95%, and 98%), potting mixes (decomposed granite, fertilizer-amended media, perlite, river sand, burnt husk, and vermiculite), and fertilization rates [(control, 0 ppm), 500, 750, 1,000, and 2,000 ppm] were investigated and the responses of S. zokuriense in terms of their survival rate, plant growth and development, CIELAB color reading, and chlorophyll content under greenhouse conditions. Results showed that these stonecrop species are shade-loving and thrive in low-light conditions. Although the fertilizer use had minimal impacts, growing plants at 65% shading, planted with RS:VL:PL (6:2:2, v/v/v) potting media have substantially produced a high survival rate in propagation using stem cuttings. Furthermore, this allowed plants to be established while supporting high vegetative growth, green and healthy plants with high chlorophyll content.

This paper is a study to improve the energy harvesting output of a TENG(Triboelectric nanogenerator) driven by wind power using fine PTFE(Polytetrafluoroethylene) flakes. The structure of the nanogenerator was manufactured in the cylindrical structure, Al(Aluminium) was attached to the inner wall of the cylinder and the PTFE flakes were rotated by the wind inside the cylinder. The number of contact and separation motions was increased as there are multiple PTFE flakes, resulting in improvement of the harvesting output. Through this, it was evaluated to the energy harvesting output characteristics according to the change in the number of PTFE flakes. Up to the optimum, the energy collection efficiency shows the linear correlation with the increase in PTFE flakes and decreases after that. As the PTFE flakes are more than the optimum, the lowering in the harvesting output is induced by obstructing the flow of wind inside the cylinder.

The process optimization of directed energy deposition (DED) has become imperative in the manufacture of reliable products. However, an energy-density-based approach without a sufficient powder feed rate hinders the attainment of an appropriate processing window for DED-processed materials. Optimizing the processing of DEDprocessed Ti-6Al- 4V alloys using energy per unit area (Eeff) and powder deposition density (PDDeff) as parameters helps overcome this problem in the present work. The experimental results show a lack of fusion, complete melting, and overmelting regions, which can be differentiated using energy per unit mass as a measure. Moreover, the optimized processing window (Eeff = 44~47 J/mm2 and PDDeff = 0.002~0.0025 g/mm2) is located within the complete melting region. This result shows that the Eeff and PDDeff-based processing optimization methodology is effective for estimating the properties of DED-processed materials.

In this paper, a GAN-based data augmentation method is proposed for topology optimization. In machine learning techniques, a total amount of dataset determines the accuracy and robustness of the trained neural network architectures, especially, supervised learning networks. Because the insufficient data tends to lead to overfitting or underfitting of the architectures, a data augmentation method is need to increase the amount of data for reducing overfitting when training a machine learning model. In this study, the Ganerative Adversarial Network (GAN) is used to augment the topology optimization dataset. The produced dataset has been compared with the original dataset.

본 연구에서는 전처리 방법별 건조 단호박의 이화학적 특성을 비교 분석하고 반응표면분석법을 이용하여 단호박 말랭이의 최적 건조 조건을 설정하였다. 단호박의 이취 제거와 가공적성을 위한 건열(굽기), 습열(증자), 마이크로웨 이브 처리의 전처리 방법을 비교하고자 호화 점도를 측정 하여 전처리 시간을 설정하였다. 각 전처리 방법별 열풍 건조 전후의 단호박 품질특성을 비교한 결과, 마이크로웨이브 처리에서 가용성 고형분, 과당, 포도당, 자당 함량이 건열과 습열 처리보다 높았고, 수분 함량, 강도 및 경도가 낮게 나타나 마이크로웨이브 처리를 단호박 열풍 건조를 위한 최적의 전처리 방법으로 설정하였고 반응표면분석법을 이용하여 최적의 열풍 건조 조건을 확인하였다. 반응표면분석은 중심합성 계획법으로 실험을 디자인하여 독립변수로서 건조 온도(30, 40, 50oC, X1)와 건조 시간(4, 6, 8 h, X2)을 설정하고, 종속변수로는 건조 단호박의 수분 함량, 수분활성도, 가용성 고형분, 강도, 경도, 과당, 포도당, 자당 함량, 색도(L*, a*, b*)를 측정하여 건조 조건을 최적화하였다. 최적화 변수로는 적합성 결여 검증에서 Pr> F 값이 0.05 이상인 수분 함량, 수분활성도, 가용성 고형분을 최적화 변수로 설정하였으며, 최적화 결과 43oC의 온도와 7.2시간이 최적 건조 조건으로 확인되었고, 예측값과 실험 값을 비교한 결과 90% 이상의 최적 비율을 보였으며, 해당하는 값이 95% 신뢰구간과 예측구간 범위에 들어 실험 디자인과 모델의 적합성 또한 검증되었다.

본 연구에서는 환경, 재료 물성 및 제작 등에서의 불확실성을 고려하여 130m급 고정식 해양구조물의 신뢰성 기반 최적설계를 수행 하였다. 구조물의 구조건전성을 엄밀하게 반영하기 위해 작용 및 허용 응력의 비인 UC 값을 신뢰성 해석 및 신뢰성 기반 최적설계의 제약조건으로 고려하였다. 해양구조물의 제작비용을 저감하기 위해 자켓형 지지구조물의 중량을 최소화하였다. 불확실성의 통계적 특성은 문헌 등을 참고하여 관측되거나 측정된 데이터를 기반으로 정의하였다. 자켓형 해양구조물의 신뢰성 해석과 신뢰 기반 최적 설계는 부재 수가 많아 계산 부담이 큼으로 문제의 차원을 축소하기 위해 응답의 중요성을 기준으로 설계변수를 선별할 수 있는 방법 을 제안한다. 또한 효율적인 계산을 위해 신뢰성 기반 최적설계를 수행하기 전 결정론적 최적설계를 먼저 수행하였다. 마지막으로, 도 출된 최적설계(안)을 기존 각 급 규정 기반 설계와 안전성 및 경제성 측면에서 비교 분석하였다.

Molds are actively used for mass production of products such as mobile phones. Molds are required to be durable and have a high level of surface roughness. Therefore, the optimization of mold processing is essential. In this study, the cutting processing of SDP20 steel used in molds was analyzed and optimized. This study is expected to contribute to the improvement of product productivity to which plastics are applied.

In system design, it is not always possible that all decision makers can cooperate fully and thus avoid conflict. They each control a specified subset of design variables and seek to minimize their own cost functions subject to their individual constraints. However, a system management team makes every effort to coordinate multiple disciplines and overcome such noncooperative environment. Although full cooperation is difficult to achieve, noncooperation also should be avoided as possible. Our approach is to predict the results of their cooperation and generate approximate Pareto set for their multiple objectives. The Pareto set can be obtained according to the degree of one's conceding coupling variables in the other's favor. We employ approximation concept for modelling this coordination and the mutiobjective genetic algorithm for exploring the coupling variable space for obtaining an approximate Pareto set. The approximation management concept is also used for improving the accuracy of the Pareto set. The exploration for the coupling variable space is more efficient because of its smaller dimension than the design variable space. Also, our approach doesn't force the disciplines to change their own way of running analysis and synthesis tools. Since the decision making process is not sequential, the required time can be reduced comparing to the existing multidisciplinary design optimization. This approach is applied to some mathematical examples and structural optimization problems.

현재 국내외적으로 다양한 강재 댐퍼의 형상에 대한 연구가 이뤄지고 있다. 강재 댐퍼는 제진장치 중 하나로 항복을 통해 지진에너지를 흡수 및 소산하여 본 구조물을 보호한다. 최근 적용되고 있는 면내 전단 변형에 의해 작동하는 댐퍼는 응력이 특정 부위에 집중되어 재료의 대부분이 본래의 역량을 발휘하지 못하는 한계가 있었다. 따라서, 본 연구에서는 이 한계를 극 복하고자 전역 최적화 기법 중 하나인 뻐꾸기 탐색을 적용해 최적 형상을 설계하였다. 탐색된 최적 형상을 토대로 수치해석과 실제 실험을 통한 성능검증을 수행했다. 최적 형상으로 설계된 댐퍼는 안정적인 이력거동을 보이고, 높은 에너지 소산능력을 확 보하는 것으로 나타났다. 본 연구에서는 전역 최적화 기법을 적용한 최적 설계 방법을 제시하고 그 결과를 검증함으로써, 다양한 형태의 공학적 문제 해결에 대한 적용 가능성을 제시하였다.

In this study, we investigated the effect of solid culture medium on the production of cordycepin in Cordyceps militaris. The regression equation was expressed as follows: Y1= 755.3-58.6625X1+4.79432E-14X2-46.6625X3-5.66269E-14X1X2- 0.025X1X3+1.62475E-14X2X3-160.6625X1 2+0.0125X2 2-206.9625X3 2, where, Y represents the value of cordycepin content (μg/g), X1 corresponds to the weight of M. alternatus in solid culture medium (g/bottle), X2 to the water content of the solid culture medium (%), and X3 to the culture period (day). The solid culture medium was optimized using the response surface methodology, and the optimal medium composition was as follows: the weight of M. alternatus in solid culture medium and water content were 16.2% and 100.7% (20.14 mL water/20 g solid culture medium), respectively, with a culture period of 39 days. Under these conditions, the cordycepin content of the fruiting bodies reached 150.0 μg/g (actual value). The supplementation of M. alternatus in solid culture for improved cordycepin content of C. militaris seems to be a promising alternative to wild and solid cultivation.

현재 양송이 품종의 개발은 1980년대에 개발된 방법에 의존하여 진행되고 있다. 유전자가위를 이용한 유전자교정 기술이 다양한 분야에서 각광받고 있고, 이 기술을 버섯 육종에도 적용하기 위하여 진행된 이 연구에서는, CRISPR/Cas9 활용에 필수적인 원형질체 분리 효율을 1.0 × 10 8 /mL까지 안정적으로 끌어올렸고, spermidine을 이용하여PEG 형질전환의 효율 또한 기존 방법에 비해 100배가량 끌어올렸음을 보고한다.

A tilted tall building is actively constructed as landmark structures around world to date. Because lateral displacement responses of a tilted tall building occurs even by its self-weight, reduction of seismic responses is very important to ensure structural safety. In this study, a smart tuned mass damper (STMD) was applied to the example tilted tall building and its seismic response control performance was investigated. The STMD was composed of magnetorheological (MR) damper and it was installed on the top floor of the example building. Control performance of the STMD mainly depends on the control algorithn. Fuzzy logic controller (FLC) was selected as a control algorithm for the STMD. Because composing fuzzy rules and tuning membership functions of FLC are difficult task, evolutionary optimization algorithm (EOA) was used to develop the FLC. After numerical simulations, it has been seen that the STMD controlled by the EOA-optimized FLC can effectively reduce seismic responses fo the tilted tall building.

The multi-layered heat source model is a model that can cover most of existing studies and can be defined with a simple formula. Based on the methodology performed in previous studies, the welding heat source was found through experiments and FEM under the welding power conditions of three cases and the parameters of the welding heat source were analyzed according to the welding power. In this study, parameters of fiber laser welding heat source according to welding power were searched through optimization algorithm and finite element analysis, and the correlation was analyzed. It was confirmed that the concentration of the welding heat source in the 1st layer was high regardless of the welding power, and it was confirmed that the concentration of the welding heat source in the 5th layer (last layer) increased as the welding power increased. This reflects the shape of the weld bead that appears during actual fiber laser welding, and it was confirmed that this study represents the actual phenomenon.