Decisions on reliability screening rules and burn-in policies are determined based on the estimated reliability. The variability in a semiconductor manufacturing process does not only causes quality problems but it also makes reliability estimation more complicated. This study investigates the nonuniformity characteristics of integrated circuit reliability according to defect density distribution within a wafer and between wafers then develops optimal burn-in policy based on the estimated reliability. New reliability estimation model based on yield information is developed using a spatial stochastic process. Spatial defect density variation is reflected in the reliability estimation, and the defect densities of each die location are considered as input variables of the burn-in optimization. Reliability screening and optimal burn-in policy subject to the burn-in cost minimization is examined, and numerical experiments are conducted.

저탄소 공정을 이용한 추출 기술인 초음파, 마이크로파 및 초고압 추출 공정기술의 이산화탄소 배출량(TCO2)과 얻어진 저분자 진세노사이드 총량의 상관관계를 비교하였다. 기존의 공정인 열수 추출 공정의 TCO2 배출량은 약 0.4 TCO2로 나타났다. 마이크로파 추출 공정의 경우 0.1437 Ton 당 CO2를 배출하는 것으로 확인 되었다. 또한, 초음파 추출 공정의 경우 0.0862 Ton 당 CO2를 배출하는 것을 확인 하였으며, 초고압 추출 공정의 경우 0.1014 Ton당 CO2를 배출하는 것을 확인 하였다. 저탄소 공정별 저분자 진세노사이드의 전환된 양을 측정한 결과 마이크로파 추출 공정의 경우 약 246.65% 정도 증진된 것을 확인 할 수 있었다. 또한, 초음파 공정의 약 275.71% 증진된 결과를 보였다. 초고압 추출 공정의 경우에는 약 295.21% 증진된 결과를 얻었다. 전체적으로 열수 추출 공정의 경우 얻어진 저분자 진세노사이드가 적은 반면 CO2 배출량이 매우 높은 것을 확인하였다. 반대로, 저탄소 추출 공정인 마이크로파, 초음파 및 초고압 공정의 경우 얻어진 저분자 진세노사이드의 양이 높으며, 방출되는 CO2의 양이 기존의 재래 방법보다 적은 것을 확인 하였다. 따라서, 저탄소 추출 공정인 마이크로파, 초음파, 초고압 추출 공정을 통해 인삼을 효과적으로 추출을 할 수 있으며, 친환경 저탄소 공법을 통해 CO2 발생량을 억제하여 경제적으로 천연물을 추출할 수 있을 것으로 사료된다.

제조공정에서 사용되어 지는 SPC(Statistical Process Control)관리 기법은 가피원인 을 탐지하여 변동을 감소시키는 통계적 공정관리 시스템이다. SPC의 대표적인 관리 기법으로는 Shewhart관리도, Cusum관리도, EWMA관리도가 있으며 이러한 관리 기법 들은 공정을 보다 안정적으로 관리 할 수 있도록 유지 및 예측하는데 사용 되어 진다. 본 논문에서는 일반적으로 사용되어 지는 Shewhart관리도와 공정 예측에 유리한 EWMA 관리도에 대해 연구해보고 공정변화에 민감하게 반응하는 EWMA 관리도의 적용 사례를 제시하고자 한다.

The design method for cumulative sum (CUSUM) control charts, which can be robust to autoregressive moving average (ARMA) modeling errors, has not been frequently proposed so far. This is because the CUSUM statistic involves a maximum function, which is in

Fe/SiO2 core-shell type composite nanoparticles have been synthesized using a reverse micelle process combined with metal alkoxide hydrolysis and condensation. Nano-sized SiO2 composite particles with a core-shell structure were prepared by arrested precipitation of Fe clusters in reverse micelles, followed by hydrolysis and condensation of organometallic precursors in micro-emulsion matrices. Microstructural and chemical analyses of Fe/SiO2 core-shell type composite nanoparticles were carried out by TEM and EDS. The size of the particles and the thickness of the coating could be controlled by manipulating the relative rates of the hydrolysis and condensation reaction of TEOS within the micro-emulsion. The water/surfactant molar ratio influenced the Fe particle distribution of the core-shell composite particles, and the distribution of Fe particles was broadened as R increased. The particle size of Fe increased linearly with increasing FeNO3 solution concentration. The average size of the cluster was found to depend on the micelle size, the nature of the solvent, and the concentration of the reagent. The average size of synthesized Fe/SiO2 core-shell type composite nanoparticles was in a range of 10-30 nm and Fe particles were 1.5-7 nm in size. The effects of synthesis parameters, such as the molar ratio of water to TEOS and the molar ratio of water to surfactant, are discussed.

Thi s study investigated, using think-aloud protocol, what L2 learners focus on, notice and uptake in a series of English writing task and how this cognitive process is affected by their English proficiency. Nine Korean middle school students were engaged in a three-stage writing task, which consisted of the compos ing stage, the stage of comparing their own text with a reformulated version, and the revising stage. During the first two stages, the students were asked to think out loud in Korean. The results show that in the composing stage the high level students tended to focus on grammatical forms while the low level groups more concentrated on lexical items. When reformulations were provided, the students well noticed the diffe rences between their original texts and the reformulated ones but a majority of their noticing remained simple noticing without a proper reason or ended up with wrong inferences. Thi s overall shallow and incorrect process at the comparing stage resulted in re latively little changes in the revising stage. These fi ndings suggest that not only the quantity but also the quality of noticing is important for acquisition and more guidance and he lp should be provided for low level learners to benefit from writing and feedback.

엘리엇은 자신이 대학의 학생이었을 때 예이츠는 이미 대단한 시인이었다고 고백한 바 있다. 두 시인들의 상징주의적인 표현기법은 매우 밀접하다는 사실을 알 수 있으며, 특히 엘리엇은 몰개성을 두 가지로 나누어 평가하면서 예이츠가 이 두 가지 모두를 실현해 내기 위해 노력한 시인으로 평가한다. 그리고 그들은 지적인 작품 창작 태도를 견지하거나 음악성을 강조하고 있는 점도 흡사하다. 예이츠의 예술 세계는 “작곡된”것이라는 사실에서 우리는 예이츠가 작품 창작과정에 심혈을 기울였다는 것을 알 수 있다. 그리고 지나친 감상적 표현을 삼가려는 그의 창작 태도는 엘리엇의 객관적 상관물의 원칙과 상통한다.

새만금 지역의 담수수자원의 활용과 고부가가치 창출을 위해 새만금 담수호를 활용한 요구수질별 용수공급을 위한 최적의 수처리 시스템을 선정하고 이에 대한 비용분석을 통해 요구수질별 담수수자원의 활용 방안을 제시하고자 하였다. 다양한 수처리 기법들의 종류, 주요 특성 및 오염인자 제거효율, 공법의 장단점 등의 비교분석을 통해 수질오염인자별 유리한 처리공법을 제시하였으며, 최적의 수처리시스템을 도출하여 새만금 지역 내 요구수질별 수처리 비용을 분석하였다. 연구결과를 통해 SS(Suspended Solid), BOD(Biochemical Oxygen Demand), 탁도 제거를 위해 FDA(Filter Disinfection Adsorption)여과기, 대장균 제거를 위한 UV(Ultra-Violet)처리공정, T-P(Total Phosphorus), T-N(Total Nitrogen) 제거를 위한 FNR(Ferrous Nutrient Removal)공법, 그리고 저농도 염처리 공정을 위해 전기투석법이 유리한 공법으로 조사되어 최적의 수처리시스템의 요소기술로 각각 선정되었다. 각 요구수질별 선정된 수처리공정에 따른 비용분석과 적용사례를 제시하여 새만금지역 담수 활용도를 높이고 부족한 상수원 해결의 대안으로 적용할 수 있을 것으로 사료된다.

Monitoring autocorrelated processes is prevalent in recent manufacturing environments. As a proactive control for manufacturing processes is emphasized especially in the semiconductor industry, it is natural to monitor real-time status of equipment throug

This paper reports the effect of sintering processes and additives on the microstructures and mechanical properties of -SiC composite ceramics. We fabricated sintered bodies of -20 vol.% SiC with or without sintering additive, such as C or , densified by spark plasma sintering as well as hot pressing. While almost full densification was achieved regardless of sintering processes or sintering additives, significant grain growth was observed in the case of spark plasma sintering, especially with . With sintered bodies, mechanical properties, such as flexural strength and Vickers hardness, were also examined.

This study investigated the adverse effects of sound treatment on physiological processes of the American leafminer, Liriomyza trifolii, during several developmental stages. Larval feeding activity was analyzed by measuring feeding tunnel length. It was significantly suppressed by sound treatment (5,000 Hz, 95 dB). Sound treatment delayed the pupal period at 315 - 5,000 Hz and prevented adult emergence at 1,000 - 5,000 Hz. Female oviposition was also inhibited by the stress sound treatments. However, phototactic adult movement was not affected by sound treatment. Pupae treated with 5,000 Hz showed marked changes in protein pattems analyzed by two dimensional electrophoresis. MALDI-TOF analysis of specific protein spots indicated that trafficking protein particle complex I, triosephosphate isomerase, hypothetical protein TcasGA2_TC013388, polycystin-2, paraneoplastic neuronal antigen MAl, and tropomyosin I (isoform M) were predicted in the control insects and disappeared in the insects treated with sound. By contrast, DOCK9, cytoskeletal keratin II, and F0F1-ATP synthase beta subunit were predicted only in the sound-treated insects. Furthermore, stress sound significantly increased the susceptibility of L. trifolii to insecticides. These results suggest that physiological processes of L. trifolii are altered by sound stress, which may be exploited to develop a novel physical control tactic against L. trifolii.

As the quality of a weld joint is strongly influenced by process parameters the welding process, an intelligent algorithms that can predict the bead geometry and shape to accomplish the desired mechanical properties of the weldment should be developed. In this study, prepared by Φ1.6mm GMA welding of metal wire nose Advice jowelui 350A 600A grade level inverter welder and DAIHEN SCR's were carried out using welding. Welding conditions were 5.5m/min wire feed rate the welding current is rapidly transmit approximately 260A, welding voltage was about 30V. CTWD a 22mm, shielding gas was Ar 20L/min and the welding speed was a 240mm/min. Using data collected during welding equipment welding current and welding voltage waveform was analyzed by measuring the volume of the transition mode. Addition of CaCO3 as a loss of the spread of the weld bead dilution rate decreased, suggesting that, GMA in the overlay welding bead shape control, dilution control and may be used as a welding flux is considered. Stabilizing effect of the arc by the Ca-containing CaF2, CaCO3, CaMg(CO3)2, respectively, welding flux 0.1wt.% added GMA welding and weld overlay were evaluated with dilution, CaF2, and CaMg(CO3)2 added to the dilution of Seemed to increase.

한국형 기준 처분시스템의 공학적 방벽에서의 열-수리-역학 복합 현상을 실증하기 위한 공학적 규모 실증실험 장치인 KENTEX에서 얻은 열, 수리, 역학적 실험 데이터를 이용하여 벤토나이트의 포화공정을 해석하였다. ABAQUS를 사용한 모델계산의 함수율과 실험 결과의 비교에서 불포화 영역에서는 온도상승으로 인해 초기 수분이 감소하는 수분 재분포 공정을 모델에 포함시키지 않아 함수율의 차가 컸다. 포화영역에서는 실험에서 초기 수분보다 낮은 함수율에서부터 지하수로 포화가 진행되지만 모델과 실험에서 얻은 함수율 값의 차이가 점점 감소해 완전포화에 도달할 때에는 두 함수율 값이 거의 비슷한 결과를 보여주었다. 포화도 약 95%에 이르는 시간은 실험결과와 계산 결과가 서로 비슷한 약 500일 정도로 예측할수 있었다. 그리고 불포화 영역의 수분 재분포가 벤토나이트의 완전포화에 도달하는 시간에는 큰 영향을 미치지 않는 것으로 분석되었다. 따라서 본 해석기법을 사용하면 지하처분연구시설의 완충재인 벤토나이트의 포화시간을 예측할 수 있을 것으로 판단된다.

This study analyzed effects of different sound treatments in frequencies and intensities on digestion and immune physiological processes of the beet armyworm, Spodoptera exigua larvae. Without effect on egg hatch, sound treatments with 100-5,000 ㎐ at 95 ㏈ suppressed feeding behavior and inhibited a digestive enzyme activity. In addition, two dimensional electrophoresis of midgut luminal proteins indicated a marked difference of the sound-treated larvae. In response to 5,000 ㎐ at 95 ㏈, larvae showed a significant decrease in hemocyte nodule formation against fungal challenge along with significant suppression in phospholipase A₂ activity in hemocyte and plasma. With increase of sound frequencies, the treated larvae showed an enhanced susceptibility to insecticides. Such sound frequency effect was significantly modulated with different sound intensities. These results suggest that sound treatment may give adverse stress to physiological processes of S. exigua larvae and may be applied to a nonchemical insect pest control.

Step feed process was analyzed stoichiometrically for the optimal operation conditions in this study. In case of optimal operation conditions, minimum R (sludge recycling) value, r (internal recycling ratio) value, and n (influent allocation ratio) value for the step feed process to acquire the maximum TN removal efficiency were identified by theoretical analysis. Maximum TN removal efficiency, based on stoichiometric reaction, can be obtained by controlling n value for the step feed process.

In an attempt to optimize the magnetic properties of (Nd, Dy)-Fe-B sintered magnets, hydrogenation and post-sintering heat treatment processes were investigated at various hydrogenation temperatures and heat treatment temperatures. The coercivity of (Nd, Dy)-Fe-B sintered magnets hydrogenated at increased to about 1.2 kOe without any detrimental effect on the remanence. Moreover, the coercivity of the magnets was enhanced further by a consecutive and step heat treatment. These results eventually leaded to the reduction of the Dy content in a high coercive (> 30 kOe) (Nd, Dy)-Fe-B sintered magnets, as much as 10%.

This study shows the effects of deionized (DI) rinse and oxide HF wet etch processes on silicon substrate during a photolithography process. We found a fail at the wafer center after DI rinse step, called Si pits, during the fabrication of a complementary metal-oxide-semiconductor (CMOS) device. We tried to find out the mechanism of the Si pits by using the silicon wafer on CMOS fabrication and analyzing the effects of the friction charge induced by the DI rinsing. The key parameters of this experiment were revolution per minute (rpm) and time. An incubation time of above 10 sec was observed for the formation of Si pits and the rinsing time was more effective than rpm on the formation of the Si pits. The formation mechanism of the Si pits and optimized rinsing process parameters were investigated by measuring the charging level using a plasma density monitor. The DI rinse could affect the oxide substrate by a friction charging phenomenon on the photolithography process. Si pits were found to be formed on the micro structural defective site on the Si substrate under acceleration by developed and accumulated charges during DI rinsing. The optimum process conditions of DI rinse time and rpm could be established through a systematic study of various rinsing conditions.

We prepared the amine epoxy adducts (AEA)/thin multiwalled carbon nanotubes (TWCNTs) composite particles using nonsolvent based methods including dry mechano-chemical bonding(MCB) process and supercritical fluid (SCF) process. The resulting TWCNTs/AEA composite particles have been used as curing agents for urethane modified bispheol A type epoxy resin. The thermal, thermomechanical properties of the epoxy resins cured with TWCNTs/AEA composite particles were measured by DMA and the dispersion of CNT was characterized by SEM. Because of high degree of CNT dispersion, thermal and mechanical properties of the epoxy resin cured with TWCNTs/AEA composite particles prepared by SCF process are better than those cured with mechano-chemically prepared TWCNTs/AEA composite particles.