Through analysing on construction cases of stupa built in A.D. 7,8th, I have researched about these : constructive methods of inner soil of stupa, spatial compositions, characteristics of structures, arrangements of inner soil and etc. And cases analysed are six ; Mireuksajiseoktap(stone pagoda of Mireuksa Temple site), Gameunsajisamcheumgseoktap(three storied stone pagoda of Gameunsa Temple site), Goseonsajisamcheungseoktap(three storied stone pagoda of Goseonsa Temple site), Wolseong nawolliocheungseoktap(five storied stone pagoda in Nawonri, Wolseong), Guksagokseoktap(three storied stone pagoda in Guksa valley), Giamgokseoktap(three storied stone pagoda in Giam valley). Additionally we researched about inner soil of Sacheonwangsaji tapji(basement of stone stupa site in Sacheonwang Temple site) to speculate on composition of Synthetically, the foundation could be divided as core space and outer space. ; the former as structural function and the latter as ornamental function. And the core area could be divided again as center column space and buffer space. The relationship between core spaces and its formation are as belows; First, according to the area of foundation and scale of stone pagoda, formations of core are differed. As the scale of stone pagoda goes bigger, and the area of foundation goes larger, the structure of stone pagoda comprised by center column type and layered-core which endure upper load independently. On the contrary, as the scale of stone pagoda goes smaller, and the area of foundation goes lesser, the structure of stone pagoda tend to use only center column to endure upper part. Second, spatial composition of core area is comprised as two spaces, one which endure upper load and buffer space which absorb side pressure and upper pressure. The buffer space tend to be used in case of those structures which could not endure side pressure or have lots of joint. In some cases, it was located below the cover stone of foundation and gained upper load. And in case that have not gained pressure from side stone, the buffer space are comprised by smalle stone or roof tile to get structural supplement.

Bulguk Temple, one of the national temples, sublimated the high formalism and symbolism into lovely art, and thus be called the pinnacle of Korean architecture. Of many characteristic structures of Bulguk Temple, the stone stereobate and stairs have a great importance in that we can read out the purpose of the architect through their relics. Especially, the stone stairs are noteworthy for they structuralize the intentional space division. The objects of this observation are Yeonwhagyo and Chilbogyo bridges at the entrance of Keungnakjeon precinct, and Cheongwoongyo and Baekwoongyo stairs at the entrance of Daewoongjun precinct. All these relics are the structures that divide the precinct areas on the basis of Buddhist theory and have strong symbolic meanings as well. Although the diverse studies have made on the structures, there are many insufficient aspects for the manifestation of the meanings. In this study, I considered the Buddhist dogmatic meanings of the structures in the formalistic view of the Buddhist architecture. The study was proceeded in the way that the establishments of former studies were fully reflected in it. Through the study, I could confirm that the objects of consideration have the double formalistic meanings and they are strongly structuralizing the symbolism.

도로공사과정에서 발생되는 현장 발생암은 경제성을 고려하여 도로용 재료로 활용되고 있으나 풍화속도가 빠른 퇴적암 골재의 경우 품질기준 적합성 여부를 판단하기 곤란한 경우가 많이 있다. 본 연구는 현장에서 발생된 이암계 퇴적암을 보조기층용 재료로 활용하였을 때 문제점을 고찰한 것이다. 그 결과 마모율은 품질기준을 만족하였으나, 27.5~16mm 입도 범위에서 중량감소율은 편마암 및 사암의 경우 20~30%이었으나 이암계 퇴적암은 47%로 매우 높은 값을 나타내었다. 골재의 안정성 시험결과에서는 편마암 및 사암에 비하여 이암계 혼합석이 매우 높게 나타났으며, 동결 및 건조에 의한 촉진 풍화시험에 의한 중량감소율에서도 편마암 및 사암계 혼합석 3.8~21%에 대하여 이암계 혼합석은 58%를 나타내어 빠른 풍화특성을 나타내었다.

A multi axis whetstone polishing system, which uses the flow system of the stone polishing machine head, has been developed. The test results show that the defect by line contact polishing does not occur in both ends of the stone and that it came to trim smoothly. In terms of the surface roughness, the corresponding index was decreased by 3.6 times, improving the polishing effect greatly. It decreased significantly the dust and noise with the wet polishing. The factors of the duty evasion at production site can thus be solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

It compared quality characteristics for the stone surface treatment system and its products. With the result, the flame burner equipment was mainly used to the surface treatment of granite, but it occurred greatly the high temperature, the rock fragment, the noise and dust. For the other side, the whetstone polishing machine for the polishing was a maintenance for the specific physical properties of stone, and it did not occur the stone fragment and the dust. The durability of the stone products due to the flame burner was investigated with that it falls to 20~25% more than the surface treatment by the whetstone polishing. Share's hardness of the polishing products in the durability test showed more greatly index than the flame burner and conventional product. The polishing products of Pochon stone in the case of the abrasion resistance showed great more 15% than the general products, more 9% than the products by the flame burner.

It used the flow system of the stone polishing machine head and it developed a multi axis whetstone polishing system. With the result, the defect by line contact polishing does not occur in both ends of the stone, and it came to trim smoothly. As the index of the surface roughness decreased to 3.6 times, the polishing effect improved greatly. It decreased greatly the dust and a noise with the wet polishing, and the factors of the duty evasion at production site were solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by shotball blasting. To developement of equipment, There is to be down noise and dust. Acording to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor. We have taken Taguchi's parameter design approch, specifically orthogonal array, and determined the optimal levels of stone surface through analysis of the experimental results using SIN ratio.

담배거세미나방의 유충에 처리된 살충제의 아치사농도( 및 )가 용발육, 성충수명 및 산란에 미치는 영향을 조사하였다. 용기간은 무처리의 암컷과 수컷에서 각각 6.9일과 8.0일, 살충제 처리에서 각각 7.2-7.6일과 8.3-8.6일로 무처리보다 살충제 처리에서 길었으나 살충제의 종류 및 아치사농도에 따른 유의한 차이는 없었다. 우화율은 무처리에서 88%, 살충제 처리에서 약 79-95%로 약제처리유무 및 아치사농도 처리에간 뚜렷한 경향이 없었으며, 특히 chlo.fenapyr-bifenthrin 및 ethofenprox처리에서 91.0% 이상의 높은 우화율을 나타내었다. 성충수명은 무처리의 암컷과 수컷에서 각각 7.7일과 7.9일, 살충제 처리에서 각각 7.1-8.4일과 7.7-9.0일로 hexaflumuron-chlorpyrifos의 처리에서 가장 길었던 것을 제외하면, 살충제 처리유무 및 농도에 따른 유의한 차이는 없었다. 총 산란수는 무처리에서 1,010개, 살충제 처리에서 778-948개로 살충제 처리유무에 따른 차이는 있었으나, 살충제의 종류 및 농도에 따른 유의한 차이는 없었다. 따라서 담배거세미나방의 용기간 및 산란은 유충에 처리된 살충제의 아치사농도처리에 의해 영향을 받았다.

파굴파리의 파 잎의 가해 습성을 조사한 결과 암컷성충은 잎의 외부에서 즙액을 섭취하고 엽육에 산란함으로서 피해를 주었다. 피해 잎은 직경 0.48mm의 백색 원형의 흡즙흔이 수십 개씩 점선을 형성하였고, 산란흔은 0.10.14mm 장타원형이고 1개 또는 수 개씩 V자형으로 무리를 지어 산란하였다 집단사육에서 성충의 흡즙은 우화당일에 시작하여 4-5일째에 가장 왕성하였고, 산란은 우화 2일부터 6일째까지 일별 산란수가 비슷하였다. 또한 흡즙과 산란은 밤보다는 낮에 더 활발하였다. 유충은 엽육에 갱도를 뚫고 엽의 위아래로 섭식하다가 밀도가 높고 발육이 진전되면 잎 끝쪽에서부터 아래쪽으로 이동하면서 잎을 고사시켰다. 유충 1마리의 식해량은 72.1이었다. 노숙유충이 잎에서 탈출하는 시간은 오전 5-7시이었고, 번데기는 토양깊이 5cm, 파측면 10 cm근처에서 대부분 용화하였다. 월동태는 번데기로 지표에서 토양깊이 10cm 이내에서 서식하였으며, 5월상순부터 6월하순까지 약 2개월 사이에 우화하였다. 성충은 잔존된 파, 묘상, 이식된 포장, 밭뚝 등으로 이동하여 생존하였다.

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surf

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by water jet to development of equipment. There is to be down noise and dust. According to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor.

To comparison the surface treatment methods of stone board materials, the results of Dorry's abrasive test were 23.4 for water-jet system and 18.9 for flame-burner system. Therefore abrasive hardness, the stone board materials by the water-jet system was greater than one by flame-jet system. As a result of Shore's hardness test, the stone board materials by water-jet system was twice greater than one by flame-jet system. Authors carried out microscopic observation to survey a defection of the composition minerals for two methods, but all of the both methods have not founded a defection. Therefore, the stone board materials by water-jet system was greater durability than one by flame-jet for the surface treatment methods.

A study to analyze and solve problems of a stone surface process experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

Hybrid ceramic particle reinforced 6061 and 5083 Al composite powders were prepared by the combination of twin rolling and stone mill crushing process, followed by consolidating processes of cold compaction, degassing and hot extrusion. The composite bar consists of lamellar structure of ceramic particle rich area and matrix area, in which the hybrid was decomposed into each TiC of about and particles of about in diameter. It also found that fine precipitates of about 30 nm were embedded in the matrix, which have grains of about 3 . Higher UTS was measured at the 5083 composite bar compared to the conventionally fabricated composite, due to again refinement effect by the rapid solidification. No particle was shown to form in the interface between the matrix and reinforcement, whereas carbon was diffused into the matrix.

1936년 7월 4일 경상남도 하동군 화개면을 진앙지로 하는 규모 5의 지진이 발생하였다. 이 지진으로 인하여 쌍계사 경내 건물과 문화재가 손상을 입었으며 금당 앞에 위치한 오층석탑의 탑두(종형석)가 추락하였다. 쌍계사 지진의 세기를 정량적으로 평가하기 위하여 철저한 고층을 거쳐서 실물크기의 석탑 모델을 제작하였다. 제작된 석탑모델을 진동대에 탑재하여 낮은 진폭에서 석탑모델의 동특성을 확인하는 예비시험과 지진파의 지진가속도를 증가시켜 가면서 석탑모델의 거동 특성을 규명하는 본 시험을 실시하였다. 석탑모델의 제작과정과 시험 절차에 관하여 상세히 기술하였고 진동대 시험 결과를 제시하고 그 결과에 관하여 논하였다.

The biodeterioration with blue-green algae has been studied since 1997 up to 2000 in the tomb of King Mooryong in Kongiu, Korea. Biodeterioration in the tomb initially started from the formation of micro-organismic biofilm that had been suggested to make

This study aim is analysis device development for design of experiment with calcium chloride relation used a hardener to search cause of product crack, product reliability improvement building data-base program for computer system of mixture rate, product improvement, and new product development.