최근, 국토교통부에서 시행한 “국가 보행교통 실태조사”로 인해 보행안전과 보행환경에 대한 중요성이 증가하고 있으며, 전반적으로 대로에서는 보행환경이 양호하나 생활도로에서는 보도가 미설치되거나 보도폭이 협소하여 보행환경이 미흡하고 보행 만족도도 낮은 것으며 생활도로의 약 34%가 유효보도폭 기준을 충족하지 못하고 있다고 조사되었다. 국가 주요 사회간접자본(SOC)인 도로, 교량, 터 널, 공공건물, 환승센터 등에 비하여 상대적으로 보행공간을 대상으로한 정보화 속도가 늦어 정보화 연구개발에 대한 추진이 시급한 실정이다. 이에 정부에서도 국가공간정보정책 기본계획에 따른 국가공간정보정책 시행계획이 확정되어 신산업 기반으로서의 역할과 안전한 시설관리를 위한 디지털 트윈 관련 기술개발 등에 투자를 확대하고, 디지털 트윈 등의 기반 정보인 고정밀 공간정보 생산 등 에 중점적으로 투자하고 있다. 현재 한국건설기술연구원, 서울시, 경기도 등에서 활용하고 있는 조사장비(PES, KRISS)는 도로포장(차 도)에서 상태 모니터링을 진행하고 있으나 이와 같은 장비들은 고가의 장비들로 실질적으로 사용하기에는 어려움이 있다. 또한, 보행 도로에서는 상태 모니터링을 수집할 장비가 없기 때문에, 보행 공간 경사, 노면 상태 등을 측정ㆍ수집하는 방법은 인력에게 의존해왔 다. 또한, 현재 보행자도로에 대한 서비스수준 산정 방식은 한국도로용량편람(2013)의 보행자시설편에서 제공하고 있는 산정 방식으로 도로용량편람에서 제시하는 보행자도로의 분석 방법을 적용하여 서비스수준을 산출할 경우, 차량과 동일한 교통량-속도-밀도 관계에 의존하여 산출하기 때문에 현실적인 보행자도로의 서비스수준을 반영하지 못하고 있는 실정이다. 이러한 문제로 인해 보행공간에 대 한 이용자의 안전 및 편의성에 대한 연구가 미흡한 상황이다. 따라서, 본 연구는 모바일매핑시스템(Mobile Mapping System)과 인공지 능(AI), 무인비행장치(Drone)를 활용한 보행공간 상태 모니터링 시스템 구축 방안을 제시하고자 한다.

PURPOSES : In this study, an existing speed-controlled Marshall stability tester was systemized as an Internet of Things(IoT) system. The Marshall stability test data were transmitted to the cloud in real-time, and an IoT optional-controlled board capable of additional load and displacement control was proposed. METHODS : The IoT systemization was built based on an improvement of an IoT height measuring system, the re-verification of standard samples for comparative analysis, and the development of a wireless IG-IoT board. The developed wireless Induk-GeoTS(IG)-IoT board was compared with existing commercial data logger using displacement- and load- calibration equipment. After the conformity of the developed wireless IoT board was established, a urethane standard sample was reproduced and verified using the recipe presented in a previous study to conduct a round-robin test. In addition, the adequacy of the speed, load, and displacement control tests for the optional-controlled characteristics was verified. the round-robin test for the Marshall stability and deformation strength and the comparative test of indirect tensile strength with the existing Marshall tester were performed using the re-verified standard sample. RESULTS : The improved two-point IoT height measurement system reduced the average relative error by 2.11% relative to the one-point measurement. From the re-verification results of the regenerated urethane standard sample, it was suitable with relative error of 3.65% in the loading elastic modulus and 4.07% in the unloading elastic modulus, compared to the existing standard sample. From the comparative analysis of the developed wireless IG-IoT board and existing commercial data logger, it was confirmed that the wireless IoT board could be reliably used, based on the average relative error of the wireless IoT board, 0.64% and that of the data logger, 3.79% in terms of the displacement(flow value) and an average relative error of 0.78% for the wireless IoT board and 0.79% for the data logger in terms of the load(stability). By analyzing the optional-controlled characteristics, it was found that the Marshall stability speed control conditions were satisfied based on the error results, with an average relative value of 2.96% under deformation strength test condition of 30mm/min, 3.23% under the indirect tensile strength test condition of 50mm/min, and 2.6% under the Marshall stability test condition of 50.8mm/min. It was also found that proper control characteristics were obtained, with an average relative error of 0.72% within the experimental load range in the load control conditions, and an average relative error of 2.4% in the experimental displacement range in the displacement control conditions. The results from the round-robin Marshall stability and deformation strength testing to verify the applicability of the IoT optional-controlled board show that the data were reliable based on the 3σ quality control method. In addition, by comparing the results of the indirect tensile strength tests, the usability of the wireless IG-IoT board was verified, with an average relative error of 0.96%. CONCLUSIONS : The IoT height measuring system was improved, and a wireless IG-IoT board that can transmit test data to a cloud platform was developed. The usability of the developed wireless IoT board was verified by round-robin testing using a re-verified urethane specimen. The IG-IoT optional-controlled board extends the verified wireless IG-IoT board, it was developed and validated for not only the existing speed control, but also for load, and displacement control.

본 논문에서는 BIM을 활용한 흙막이 시스템을 개발하고 소개한다. 선행 연구 분석을 통해서 흙막이 BIM 시스템을 이루는 기술들 에 대한 조사를 바탕으로 요소 기술들을 개발하였다. 첫 번째 요소 기술로, 선행 연구 및 표준 등을 활용해 BIM라이브러리를 구축하여 범용성과 재사용성을 확보하였다. 두 번째로, 토공 2D 기반의 토공 물량 산출법들을 분석하고 흙막이 BIM 시스템으로 활용하되 추가 로 IDW 보간법을 활용하여 지형 생성 및 토공량 산출 시스템을 구축하였다. 세 번째로, 물량 산출을 위한 4가지 수식을 제안하여 객체 마다 각각 다르게 물량 산출법을 적용하여 개발하였다. 이후, 시스템에서 산출되는 물량산출서와 2D 기반 물량산출서와의 비교와 검 증을 통해서 시스템이 앞으로 나아가야할 방향과 한계에 대해 알아보았다.

For this study, we established a system for the CPU cooling performance evaluation and conducted performance tests on air-cooling and water-cooling to understand the effect of the CPU cooling method on performance. For the performance evaluation, the test chamber and water-cooling system were set up, the workload S/W was selected, and a case file was created. In the case of the air-cooling, the CPU temperature is sensitively affected by the outside air temperature, the direction of the board installation, and the influence of the airflow formed around it, and may cause a lot of fluctuations in the CPU temperature. When the water-cooling system was applied, the CPU temperature decreased from 75℃℃ to 37℃ compared to the air-cooled type under the test conditions of 28.5℃ and 3LPM cooling water supply temperature and flow rate. As the CPU clock speed increased due to the decrease in temperature, it was found that the job execution time was reduced by 15~23%. In the future, it is expected that using this performance evaluation environment established through this study will enable us to easily conduct test evaluations for various processors, cooling methods, and changes in operating conditions.

In this paper, we investigate the requirements of QPA(Quality Process Audit), which is a process quality audit system for secondary defense contractors, compared with those of DQMS(Defense Quality Management System). And evaluate whether the deployment of QPA meets the DQMS certification requirements through the case example of Company H. The evaluation items of QPA are composed of five categories such as Material Management, Incoming Inspection, Manufacturing Process, Product Evaluation, and Packaging Management. The QPA requirements are mainly related to the chapter 7(support) and chapter 8(operation) of DQMS standards. In this view point, QPA can be expected as an effective audit for suppliers preparing for DQMS certification. In the case example, we evaluate the results and effects of improvement due to QPA and compare it with the case of DQMS. QPA can be used as appropriate quality management standards of secondary and tertiary defense contractors and can provide the basis guidelines for the preparation of implementation steps in DQMS certification.

최근 회전 회전기계의 건전성 관련 연구가 활발하게 진행중이며, 조선업의 대표적인 회전기계인 갠트리 크레인에도 이를 적용하고자 하는 연구가 활발하게 진행되고 있다. 하지만 조선업의 갠트리 크레인의 경우 상대적으로 낮은 RPM으로 구동되고 잦은 운 전과 정지가 이루어지며 충격, 소음 등의 외부환경 인자가 측정 데이터에 영향을 크게 미쳐 오차를 발생시킬 수 있다. 본 연구에서는 조선업의 내업공정에서 사용되는 갠트리 크레인의 Hoist 모사장비를 제작하여, 운전조건(RPM) 변화와 데이터 획득 센서의 위치 차이가 획득 데이터에 미치는 오차를 통계적으로 분석하였다. 연구결과 상대적으로 낮은 운전조건에서는 센서 위치 차이에 따른 획득 데이터 의 오차는 크게 발생하지 않았으나, 상대적으로 높은 운전조건에서는 획득 데이터의 오차가 크게 발생하는 것으로 확인하였으며, 회전 기계의 데이터 획득 시 운전조건과 획득 센서위치가 획득 데이터에 영향을 미치는 것으로 확인하였다.

In order to implement a dialogue system for Korean language tutoring, this paper aimed to describe a method of constructing a large amount of Korean task-oriented dialogue data using the Wizard-of-OZ method and a pedagogical feedback and evaluation method for Korean language errors made by foreign learners. The procedure for constructing a large amount of Korean task-oriented dialogue data consisted of three steps. The first step was the preparation step for the learner’s prior learning. The second step was related to a large Korean dialogue map constructed by Korean native speakers using the Wizard-of-OZ method. The third step was implementation of a Korean dialogue system based on the dialogue map. In educational feedback and evaluation, functions such as paraphrases, recommendation expressions, educational success rate, and error content evaluation by learner level were proposed. By means of the Wizard-of-OZ method, 3,253 Korean task-oriented dialogue data were established in four domains: restaurant, hotel, tourist attraction, and taxi. The dialogue system for Korean language tutoring is currently being implemented based on Korean taskoriented dialogue data. Ultimately, the task-oriented dialogue system for Korean language tutoring aims at an “augmentation of education” that collaborates with human teachers, not “teacher-less education” that replaces human teachers.

운장산 천문대에 있는 원격 유성 분광 관측 시스템의 설치 및 운영에 대해 자세히 설명한다. 총 3대의 고감도 CCD 카메라가 설치되었으며 2대의 CCD 카메라에는 렌즈 전면에 회절 격자를 부착하였다. 시스템은 2019년 11월에 설치되었고, f/1.2 렌즈와 결합된 고감도의 “Watec-902H2” 카메라가 사용되었다. 스펙트럼 관찰을 위한 회절 격자는 500 l/mm이 사용되었다. 관측은 2019년 11월부터 2020년 6월까지 진행되었다. 유성 탐지 및 후속 분석을 위해 SonotaCo UFO 소프트웨어 제품군을 사용했으며, 유성 스펙트럼을 분석하기 위해서는 RSpec 소프트웨어를 사용하였다. 관측영상을 활용하기 위해 Astronomical Calibration과 Photometric Calibration을 수행하였고, 최종적으로 유성의 화학 성분을 분석하였다. 우리는 유성 분광 관측 시스템의 설치와 설정/운영 경험을 설명하고 첫 번째 관측 결과를 제시한다 . 또한 결과를 통해 유성의 기원에 대한 간략한 정보를 제공하고자 한다.

Recently, due to the aging of workers and the weakening of the labor base in the automobile industry, research on quality inspection methods through ICT(Information and Communication Technology) convergence is being actively conducted. A lot of research has already been done on the development of an automated system for quality inspection in the manufacturing process using image processing. However, there is a limit to detecting defects occurring in the automotive sunroof sealer application process, which is the subject of this study, only by image processing using a general camera. To solve this problem, this paper proposes a system construction method that collects image information using a infrared thermal imaging camera for the sunroof sealer application process and detects possible product defects based on the SVM(Support Vector Machine) algorithm. The proposed system construction method was actually tested and applied to auto parts makers equipped with the sunroof sealer application process, and as a result, the superiority, reliability, and field applicability of the proposed method were proven.

In the recent business environment, risks related to product safety problems are increasing. These are arising from various factors such as increasing product and production complexity, supply chain diversification, enhanced PL (product liability) law and strengthening regulations of the government. Accordingly, ISO (international organization for standardization) published standards of PSMS (product safety management system) for suppliers such as ISO 10377 and ISO 10393. Meanwhile, the ISO 9001 QMS (quality management system) was revised in 2015, and it has established itself as an effective tool that can consistently meet the various requirements of stakeholders and promote customer satisfaction. This study aims to suggest an integration framework of QMS and PSMS based on the recent ISO international standards. To this end, firstly, the relationship between QMS and PSMS is studied based on the quality and product safety definitions, PDCA (plan-do-check-act) cycle and risk-based thinking. Secondly, the requirements of ISO 10377 and ISO 9001 are compared and classified as the common and ISO 10377 specific requirements. Finally, integration steps of two systems are suggested and guidelines that can systemize the integrated requirements are presented in the aspect of processes and documentation. This study is expected to be used as a guideline that helps companies those have already acquired QMS certification to build an international-level product safety management system early.