This study was carried out to develop the technology to manage the growth of mushrooms, which were cultivated based on long-term information obtained from quantified data. In this study, hardware that monitored and controlled the growth environment of the mushroom cultivation house was developed. An algorithm was also developed to grow mushrooms automatically. Environmental management for the growth of mushrooms was carried out using cultivation sites, computers, and smart phones. To manage the environment of the mushroom cultivation house, the environmental management data from farmers cultivating the highest quality mushrooms in Korea were collected and a growth management database was created. On the basis of the database value, the management environment for the test cultivar (hukthali) was controlled at 0.5 °C with 3–7% relative humidity and 10% carbon dioxide concentration. As a result, it was possible to produce mushrooms that were almost similar to those cultivated in farms with the best available technology.

A number of plating companies have been exposed to the risk of fire due to unexpected temperature increasing of water in a plating bath. Since the companies are not able to forecast the unexpected temperature increasing of water and most of raw materials in the plating process have low ignition temperature, it is easy to be exposed to the risk of fire. Thus, the companies have to notice the changes immediately to prevent the risk of fire from plating process. Due to this reason, an agile and systematic temperature monitoring system is required for the plating companies. Unfortunately, in case of small size companies, it is hard to purchase a systematic solution and be offered consulting from one of the risk management consulting companies due to an expensive cost. In addition, most of the companies have insufficient research and development (R&D) experts to autonomously develop the risk management solution. In this article, we developed a real time remote temperature monitoring system which is easy to operate with a lower cost. The system is constructed by using Raspberry Pi single board computer and Android application to release an economic issue for the small sized plating manufacturing companies. The derived system is able to monitor the temperature continuously with tracking the temperature in the batch in a short time and transmit a push-alarm to a target-device located in a remoted area when the temperature exceeds a certain hazardous-temperature level. Therefore, the target small plating company achieves a risk management system with a small cost.

PURPOSES : Efficiency Improvement of a public road construction project management work using the development of a real-time remote site monitoring system METHODS : In this study, we developed the remote site monitoring system using a web camera for road construction projects in the RCMA(Regional Construction Management Administration). We can be monitored a construction progress and a weak point of the situation in real time using this. To achieve this, we tested about 10 road construction projects ordered by RCMA. Then, we verified a applicability for the site monitoring system in future. RESULTS : Take advantage of the remote site monitoring system consists of the Construction CALS System, one of the business systems used in the part of the MLTM(Ministry of Land, Transport and Maritime Affairs) institution-agencies. Was configured to be served through the "Construction CALS System" of "Construction Management System(Contractors)" and the "Construction CALS Portal System". Through this, Benefit analysis through a pilot application of the 10 road construction sites and developing considerations and "Guide for visual information processing equipment installation-operating in construction sites"are presented. CONCLUSIONS : Through the establishment of remote site monitoring system can improve the efficiency of construction management services. In addition, Various disasters and calamities, accidents and illegal construction will be prevented in advance is expected. This is expected to further improve the quality of the facilities.

This paper describes the remote monitoring of breaking ocean waves generated by Typhoon Nabi, whose name means butterfly in Korean, using a marine X-band radar in the Yongho Man, Busan, Korea. The basic purpose of this study is to investigate the dynamic behavior and to estimate the periods of breaking waves across the surf zone from radar image sequences. In these experiments, the land-based radar system imaged the inshore zone of three miles from the coastline to a isobath of 30 meters. The wave period and the dominant wave direction for breaking ocean waves extracted directly from radar image sequences were 157.4 meters and 298 degrees, respectively. However, the result calculated quantitatively by the continuous wavelet transform (CWT) showed that the period of breaking waves was 154.3 meters. The average difference in breaking wave periods between the value extracted by using EBRL (electronic bearing and range line) of radar and the calculated value by CWT was 3.1 meters, showing that the CWT method is also accurate. These results suggest that a marine X-band radar system is a viable method of monitoring the breaking ocean waves.

Purpose – The purpose of this study is to conduct a monitoring study on the learning process of e-learning contents. This study has two research objectives. First, by conducting monitoring research on the learning process, we aim to explore the implications for content development that reflects future student needs. Second, we want to collect empirical basic data on the estimation of appropriate amount of learning. Research design, data, and methodology – This study is a case study of learner's learning process in e-learning. After completion of the study, an in–depth interview was made after conducting a test to measure the total amount of cognitive load and the level of engagement that occurred during the learning process. The tool used to measure cognitive load is NASA-TLX, a subjective cognitive load measurement method. In the monitoring process, we observe external phenomena such as page movement and mouse movement path, and identify cognitive activities such as Think-Aloud technique. Results – In the total of three research subjects, the two courses showed excess learning time compared to the learning time, and one course showed less learning time than the learning time. This gives the following implications for content development. First, it is necessary to consider the importance of selecting the target and contents level according to the level of the subject. Second, it is necessary to design the learner participation activity that meets the learning goal level and to calculate the appropriate time accordingly. Third, it is necessary to design appropriate learning support strategy according to the learning task. This should be considered in designing lessons. Fourth, it is necessary to revitalize contents design centered on learning activities such as simulation. Conclusions - The implications of the examination system are as follows. First, it can be confirmed that there is difficulty in calculating the amount of learning centered on learning time and securing objective objectivity. Second, it can be seen that there are various variables affecting the actual learning time in addition to the content amount. Third, there is a need for reviewing the system of examination of learning amount centered on 'learning time'.

The purpose of this study is able to prevent accidents as users will tell you in real time the long distance is to the safety inspection of various structures using a 3D scanner therefore, it is possible to use civil engineering structures, such as building structures

본 논문은 “구조물의 실시간 원격 모니터링 및 제어(Remote Structural Monitoring and Control in Real Time)”로 언급되는 융합기술에 초점을 맞추고 있다. 이러한 기술은 대형의 복잡한 인프라구조물의 복구나 지속성을 향상시킬 수 있다. 이러한 관점에서 본 논문은 기존의 구조물 모니터링 기술을 실시간 원격 모니터링 및 제어로 확장하고자 한다. 이는 유틸리티(Utility)의 안정적인 운영을 위한 기존 SCADA(Supervisory Control and Data Acquisition) 시스템을 발달시켜 차세대 SCADA 시스템을 개발하는 것으로 확보할 수 있다. 본 논문에서는 차세대 SCADA 시스템을 활용한 물공급 네트워크에 대해 설명하고 이를 교량이나 다른 시스템에 적용하고자한다.

This paper presents a remote monitoring and simulation system for a building cleaning mobile robot. It provides a tool of convenient 3D graphical map construction including network camera image viewer and status information of the robot. The 3D map is reconstructed from existing 2D building CAD data with DXF format using OpenGL graphic API. Through this system, it is possible to monitor and control the cleaning mobile robot from remote place. A practical experiment is performed to show the reliability and convenience of the monitoring system. The proposed system is expected to give efficient the way of control and monitoring to building cleaning mobile robot.