An analysis of changes in herbal tea composition according to the difference in processing conditions showed slightly reduced crude protein content and increased, moisture, crude fat and solid elution rate after treatment using the ash puffing process compared to roasting. Benzopyrene content was significantly reduced to 0.18 ppb from 0.51 ppb. This result indicated that, the B(α)P content differed depending on the processing condition and raw materials. Generation of food B(α)P is mainly include the thermal decomposition of food cooking, when the processing which is a main component of food carbohydrate, protein, fat reason despite severe heat treatment as a whole is to be detected even though the B(α)P in this way is considered to be. The taste, aroma and color did not show a large difference, but the strong bitters taste decreased.

한방차의 roasting 온도를 80∼140℃ 범위로 하여 성분 변화를 분석한 결과, 온도의 상승에 따라 수분함량이 감소하고 일부 탄화가 발생하며 조 회분 함량이 소폭 상승하였고, 조 지방 및 조단백질 함량은 소폭 감소하였다. 한방차의 고형분 용출율은 0.15~0.32%(w/w)를 나타내었는데, roasting 온도가 상승할수록 감소하는 경향을 나타내었다. 처리온도가 80∼110℃구간에서는 큰 변화를 나타내지 않은 반면 110∼140℃구간에서는 고형분 용출율이 급격히 감소하였다. 온도가 상승할수록 용출율이 감소하는 것은 내부 조직이 치밀하여 상대적으로 용출이 어렵기 때문이다. 벤조피렌 함량은 0.29~0.51ppb으로 온도가 높을수록 B(α)P함량이 증가하였다. 처리온도와 원재료에 따라 B(α)P 함량에 차이가 발생하며, 내부온도는 약 200℃정도지만 roaster 표면의 실제 온도는 약 2000℃에 이르는데 표면과 접촉한 부분에서 B(α)P가 생성된다. B(α)P는 주로 음식을 조리, 가공할 때 식품의 주성분인 탄수화물, 단백질, 지방 등이 열분해 되어 생성되는 것으로 생각된다.

팽화 처리온도를 각각 140~220℃로 한 한방차 제품의 성분변화를 분석한 결과는 다음과 같다. 처리온도의 상승에 따라 일부 탄화가 발생하며 조회분 함량이 상대적으로 상승하는 소폭의 변화가 있었고, 조단백질 및 조지방 함량은 거의 변화가 없는 것으로 나타났으며 수분함량은 감소하였다. 한방차의 고형분 용출률은 0.18~0.27%(w/w)로 나타내었는데, 팽화온도가 상승할수록 증가하였다. 고형분의 용출은 온도가 화학적 변화보다 물리적 변화에 의해 식품의 원재료 성분인 탄수화물, 단백질, 지방 등이 천연 상태에서 상호가교 결합이 물리적인 힘으로 어느 정도 파괴되어 성분의 용출이 용이해지기 때문인 것으로 생각된다. 벤조피렌 함량은 0.18~0.24ppb로 처리온도, 원재료에 따라 B(α)P 함량에 차이가 발생한 것으로 나타났다.

Background: The objective of this study was to make colloidal dispersions of the active compounds of radix of Angelica gigas Nakai that could be charaterized as nano-composites using hot melt extrusion (HME). Food grade hydrophilic polymer matrices were used to disperse these compound in aqueous media. Methods and Results: Extrudate solid formulations (ESFs) mediated by various HPMCs (hydroxypropyl methylcelluloses) and Na-Alg polymers made from ultrafine powder of the radix of Angelica gigas Nakai were developed through a physical crosslink method (HME) using an ionization agent (treatment with acetic acid) and different food grade polymers [HPMCs, such as HP55, CN40H, AN6 and sodium alignate (Na-Alg)]. X-ray powder diffraction (XRD) analysis confirmed the amorphization of crystal compounds in the HP55-mediated extrudate solid formulation (HP55-ESF). Differential scanning calorimetry (DSC) analysis indicated a lower enthalpy (ΔH = 10.62 J/g) of glass transition temperature (Tg) in the HP55-ESF than in the other formulations. Infrared fourier transform spectroscopy (FT-IR) revealed that new functional groups were produced in the HP55-ESF. The content of phenolic compounds, flavonoid (including decursin and decursinol angelate) content, and antioxidant activity increased by 5, 10, and 2 times in the HP55-ESF, respectively. The production of water soluble (61.5%) nano-sized (323 ㎚) particles was achieved in the HP55-ESF. Conclusions: Nano-composites were developed herein utilizing melt-extruded solid dispersion technology, including food grade polymer enhanced nano dispersion (< 500 ㎚) of active compounds from the radix of Angelica gigas Nakai with enhanced solubility and bioavailability. These nano-composites of the radix of Angelica gigas Nakai can be developed and marketed as products with high therapeutic performance.

Background : The objective of this study was to make colloidal dispersion of the active compound was characterized nano-composite from radix of Angelica gigas Nakai using hot melt extrusion (HME). Therefore, food grade hydrophilic polymer matrices was used to disperse compound in aqueous media. Methods and Results : Extrudate solid formulations (ESFs) mediated various HPMCs (hydroxypropyl methylcellulose) and Na-Alg polymer from ultrafine powder of radix of Angelica gigas Nakai was developed through physical crosslink method (HME) with ionization agent (treatment of acetic acid) and food grade polymer [HPMCs such as HP55, CN40H, AN6 and sodium alignate (Na-Alg)]. X-ray powder diffraction (XRD) analysis confirmed the amorphization of crystal compounds in extrudate solid formulations mediated HP55 (HP55-ESF). Differential scanning calorimetry (DSC) analysis indicated a lower enthalpy (ΔH = 10.62 J/g) of glass transition temperature (Tg) in HP55-ESF. Infrared fourier transform spectroscopy (FT-IR) reveled new functional groups produced in HP55-ESF. Phenolic compound, flavonoid (including decursin and decursinol angelate) and antioxidant activity increased at 5, 10 and 2 times in HP55-ESF. Water solubility (61.5%) nano size (323 ㎚) particle was achieved in the HP55-ESF. Conclusion : Nano-composites have been developed utilizing melt-extruded solid dispersions technology by food grade polymer enhanced nano dispersion (< 500 ㎚) of active compound from radix of Angelica gigas Nakai with enhanced solubility and bioavailability. This nano-composites of radix of Angelica gigas Nakai developmental and marketed products to enable therapeutic performance.

Background: The current regulations regarding the storage of medicinal herbs do not define the storage temperature; instead, but the only requirement is that the plastic bags used for storing the medicinal herbs should be tightly sealed during storage. The practice of storing medicinal herbs at room temperature (28℃), causes many problems, including growth of insect pests on the stored medicinal herbs. Thus, it is necessary to understand the effect of insect pests on the quality of medicinal herbs stored at room temperature (28℃) for the improving the relevant regulations. Methods and Results: Cnidium rhizome and Angelica radix were infested with Lasioderma serricorne F. adults and incubated at 28℃ for 2.5 and 5 months. The population of L. serricorne was established rapidly, and left many holes, cadavers, and feces on the stored medicinal herbs, thereby greatly damaging the product appearance and hygiene. In addition, active ingredients of the medicinal herbs were significantly decreased, probably reducing their medicinal quality as well. Conclusions: These results indicate that the current regulations are not sufficient to prevent the establishment of storage insect pests and guarantee the quality and hygiene of stored medicinal herbs. Therefore, it is necessary to devise proper storage protocols and upgrade the current relevant regulations to maintain the quality of medicinal herbs during storage.

To develop an optimal storage method of root of Angelica acutiloba Radix, which has been grown as major herbal medicine material to be cultivated, root of Angelica acutiloba Radix, was stored for 10 months with different packing materials and sealing methods. The loss in dry weight as influenced by packing materials and sealing methods was the lowest at vacuum packing and followed by complete sealing methods with transparent polyethylene film. The ratio of root rot during the storage period was not significantly different between packing materials but was significantly different between sealing conditions. In conclusion, vacuum packing and complete sealing with polyethylene film appears to be most optimal for storage of Angelica acutiloba Radix.