To evaluate the inventory of radionuclides for the disposal of waste generated from nuclear power plants, indirect assessment methods such as the scaling factor method or average radioactivity concentration method can be applied. A scaling factor represents the average concentration ratio between key radionuclides and difficult-to-measure (DTM) radionuclides, while the average radioactivity concentration refers to the average concentration of DTM radionuclides, regardless of the concentration of key radionuclides or within specific ranges of key radionuclide concentrations. These indirect assessment methods can be statistically derived through the analysis of representative drums. This study will address how to apply these scaling factors and average radioactivity concentrations. Firstly, the concentration of gamma-emitting radionuclides will be analyzed using a drum radionuclide analyzer, and the concentration of DTM radionuclides will be determined by applying scaling factors specific to each DTM radionuclide. In the case of using the average radioactivity concentration method, the average concentration of DTM radionuclides will be applied independently of the concentration of gamma-emitting radionuclides. It is crucial to perform radioactive decay correction based on the date of generation or disposal when applying scaling factors or average radioactivity concentration. Additionally, for repackaged 320 L drums, determining which drum among the two 200 L drums inside should serve as the reference is of utmost importance

ASL estimation of public building is based on how appropriate the maximum age of the asset is derived based on the age record of the asset in the statistical data owned by public institutions. This is because we get a 'constrained' ASL by that number. And it is especially true because other studies have assumed that the building is an Iowa curve R3. Also, in this study, the survival rate is 1% as the threshold value at which the survival curve and the predictable life curve almost coincide. Rather than a theoretical basis, in the national statistical survey, the value of residual assets was recognized from the net value of 10% of the acquisition value when the average service life has elapsed, and 1% when doubling the average service life has elapsed. It is based on the setting mentioned above. The biggest constraint in fitting statistical data to the Iowa curve is that the maximum ASL is selected at R3 150%, and the 'constrained' ASL is calculated by the proportional expression on the assumption that the Iowa curve is followed. In like manner constraints were considered. First, the R3 disposal curve for the RCC(reinforced cement concrete) building was prepared according to the discarding method in the 2000 work, and it was jointly worked on with the National Statistical Office to secure the maximum amount of vintage data, but the lacking of sample size must be acknowledged. Even after that, the National Statistical Office and the Bank of Korea have been working on estimating the Iowa curve for each asset class in the I-O table. Another limitation is that the asset classification uses the broad classification of buildings as a subcategory. Second, if there were such assets with a lifespan of 115 years that were acquired in 1905 and disposed of in 2020, these discarded data would be omitted from this ASL calculation. Third, it is difficult to estimate the correct Iowa curve based on the stub-curve even if there is disposal data because Korea has a relatively shorter construction history, accumulated economic wealth since the 1980’s. In other words, “constrained” ASL is an under-estimation of its ASL. Considering the fact that Korea was an economically developing country in the past and during rapid economic development, environmental factors such as asset accumulation and economic ability should be considered. Korea has a short period of accumulation of economic wealth, and the history of 'proper' architectures faithful to building regulations and principles is short and as a result, buildings 'not built properly' and 'proper' architectures are mixed. In this study, ASL of RCC public building was estimated at 70 years.

We propose a method for developing an in-pipe inspection robot based on multiple inertial sensors. Estimating the position of underground pipelines where satellite signals do not reach remains challenging. High-precision inertial sensors and high-tech mobile robots can be solutions, but their high price limits their general use. We developed an in-pipe inspection robot by combining various low-cost sensors with a microcomputer-based RC car platform. First, we fabricated a multi-inertial sensors module by combining commercial grade low-cost MEMS inertial sensors. The sensor values measured by the multi-inertial sensor are transmitted to the main computer through the MCU, and the attitude angle of the vehicle is finally calculated through the inverse variance weighted average. The travel distance of the robot is estimated by using hall sensors and neodymium magnets attached to the inside of the wheels. Also, we measured the pipe diameter using multiple ultrasonic sensors. We verified the estimation accuracy of each sensor through experiments and consequently estimated the 3D trajectory of the in-pipe robot.

This study was conducted to identify the distribution characteristics of the impervious area in urban watersheds and to reduce the deviation of the impervious area ratio that occurs depending on the degree of construction of land surface condition data. The average impervious area ratio by land use that can be applied to the calculation of the urban impervious area ratio was derived by statistically analyzing the distribution characteristics of the impervious area ratio by land use according to the urban watershed conditions. In urban watersheds, the change in impervious area ratio over the past 20 years has continuously increased in watersheds with an impervious area ratio of less than 60%, and decreased in watersheds with a high impervious area ratio of 60% or more. The average impervious area ratio by land use applicable to the land use technique is “Residential area” 84.0%, “Residential and commercial mix” 93.6%, “Commercial and business facilities” 89.8%, “Industrial land” 84.8%, “Public land” 47.3%, “Transportation facility” 93.3%, “Urban revitalization facility” 61.1%, “Bare land” 17.6%, “Special area” 11.4%, “Forest and open space” 3.5%, “Rivers and lakes” 9.2%. As a result of examining the adequacy of the average impervious area ratio by land use, the difference between the calculated value of the impervious area ratio using land use techniques and the actual impervious area ratio of the biotope map ranged from -3.0%p to 2.6%p at the significance level of 95%. In addition, when the watershed condition is applied, the difference ranged from -2.3%p to 1.7%p. By applying the average impervious area ratio by land use derived in this study, it was found that the impervious area ratio of the target urban watershed could be calculated within a deviation of ±3%p.

PURPOSES : The purpose of this study is to review a method to estimate the average travel speed of the Bus Rapid Transit(BRT) section using the bus departure and arrival time data collected using the Korean bus information system (BIS). METHODS : To determine an average travel speed estimation model suitable for the BRT system in Korea, the speed estimated using the speed estimation model of TCQSM, which is used in the U.S., and that using the proposed speed estimation model that used the bus departure and arrival time data were compared with the actual travel speed using a t-test. RESULTS : The average travel speed estimated using the proposed method was more suitable for the actual average travel speed than that estimated using the TCQSM model. CONCLUSIONS : As a result of estimating the average travel speed, if the length of the link is 900 m, SBRT can be constructed on the existing road, but at least 1,200 m must be ensured to build SBRT in the new city. The proposed bus average travel speed estimation model can be used to review the BRT operational efficiency considering the speed limit, traffic signal, and dwelling time at bus stops in the planning and operation stages of the BRT.

본 연구에서는 MRI 검사 시 움직임 보정을 목적으로 기존 병렬 평균화 방식과 비교하여 직렬 평균화 방식을 이용한 움직임 보정효과를 시퀀스 별로 비교하고 유용성을 평가 하였다. 지속기도양압 장치를 이용해 움직이는 팬텀을 구현하여 실험을 진행하고 자원자는 1명을 대상으로 했다. 검사 장비는 3.0T MRI 장비와 32채널 전신 코일을 사용하였다. 기준 시퀀스는 3차원 eTHRIVE이며 비교대상으로 3차원 Vane XD 시퀀스를 사용하였다. 평가방법은 팬텀 실험에서 정량 평가로 획득한 팬텀 영상의 고스트 신호 백분율을 ACR MRI 팬텀 가이드라인에 따라 평가하였다. 자원자 실험은 정성 평가로 영상의 인공물 보상정도를 5점 리커트 척도를 통해 평가하였다. 팬텀실험 결과 SMART의 사용에 따라 고스트 인공물의 신호가 NEX 6에서 128-240% 값으로 현저히 감소했고, 3차원 Vane XD와 비교하여 NEX 6의 사용에서 유사한 값의 신호감소를 확인 하여 유용함을 확인 하였다. 자원자 실험결과 SMART Off에서 NEX를 증가 시켰을 경우에 비교하여 SMART On에서 인공물 보상에 대한 점수가 크게 상승하는 결과를 보였다. 따라서 팬텀 실험과 자원자 실험 모두에서 SMART 기능의 유용성을 확인 할 수 있었고, 향후 본 논문의 여러 제한점에 대한 추가 연구를 진행한다면 임상적 활성화를 기대 할 수 있겠다.

본 연구는 두록종 돼지의 복당 생시체중 형질(복당 생시체중 평균, 복당 생시체중 표준편차)과 산자수 형질(총 산자수, 생존 산자수, 사산두수)의 유전모수를 추정하고 이들 형질간의 상관관계와 개량방안을 알아보기 위해 실시하였다. 분석에는 국립축산과학원에서 2006~2016년 사이에 분만한 두록 모돈 1,081복의 자료를 이용하였다. 분석형질은 복당 생시체중 평균(ABW), 복당 생시체중 표준편차(BWSD), 총 산자수 (NB), 생존 산자수(NBA) 및 사산두수(NBD)이다. 유전모수 추정은 다형질 개체모형을 이용하였다. 각 형질에 대한 유전력은 복당 생시체중 평균(ABW), 복당 생시체중 표준편차(BWSD), 총 산자수(NB), 생존 산자수(NBA) 및 사산두수(NBD)에 대해 각각 0.32, 0.13, 0.11, 0.10, 및 0.06으로 추정되었다. 복당 생시체중 평균(ABW)과 복당 생시체중 표준편차(BWSD)는 0.75의 높은 정의 유전상관을 보인 반면 생존 산자수(NBA)와 복당 생시체중 평균(ABW), 복당 생시체중 표준편차(BWSD)간의 유전상관은 각각 –0.26, -0.40로 생존 산자수(NBA)가 증가함에 따라 복당 생시체중 평균과 복내 개체간 체중의 표준편차는 감소하는 것으로 나타났다. 생존 산자수(NBA)와 사산두수(NBD)간의 유전상관은 0.24로 생존 산자수(NBA)가 증가하면 사산두수(NBD)도 증가하는 유전적 관계를 나타내었다. 한편 복당 생시체중 평균(ABW)과 복당 생시체중 표준편차(BWSD), 사산두수(NBD), 총 산자수(NB)간의 유전상관은 각각 0.75, 0.81과 0.08로 추정되어 복당 생시체중 평균(ABW)이 증가하면 총 산자수(NB)의 큰 변화 없이 복당 생시체중 표준편차(BWSD), 사산두수(NBD)가 증가하는 것으로 나타났다. 본 결과로 미루어 볼 때 유전력이 높은 복당 생시체중 평균(ABW)은 직접선발을 통한 빠른 개량이 가능한 반면 복당 생시체중 표준편차(BWSD), 총 산자수(NB), 생존 산자수(NBA) 및 사산두수(NBD) 형질은 직접선발을 통한 개량 효과가 낮을 것으로 판단된다. 특히 자돈 생시체중의 균일도를 개량하고자 한다면 복당 생시체중 표준 편차(BWSD)에 대한 직접선발 방법과 더불어 복당 생시체중 평균(ABW)을 이용해 간접선발하는 방법 또한 이용 가능할 것으로 사료된다.

To calculate proper seismic design load and seismic design category, the exact site class for construction site is required. At present, the average shear-wave velocity for multi-layer soil deposits is calculated by the sum of shear-wave velocities without considering of vertical relationship of the strata. In this study, the transfer function for the multi-layered soil deposits was reviewed on the basis of the wave propagation theory. Also, the transfer function was accurately verified by the finite element model and the eigenvalue analysis. Three methods for site period estimation were evaluated. The sum of shear-wave velocities underestimated the average shear-wave velocities of 526 strata with large deviations. The equation of Mexican code overestimated the average shear-wave velocities. The equation of Japanese code well estimated the average shear-wave velocities with small deviation.

북베트남의 컨테이너 터미널을 주제로 한 연구는 다수 있지만, 선박의 대기시간이나 화물처리에 관련한 비용 측면에서의 경쟁을 다룬 연구는 거의 없다. 이 논문은 북 베트남에 입지한 컨테이너 터미널의 TEU당 평균대기비용을 추산해 본 연구다. 우선 대기 행렬이론을 적용하여 평균대기시간을 추산한 뒤, 불확실성 이론을 적용하여 선박의 일당 비용을 추산할 것이다. 그리고 각 터미널의 하역능력 내지 물동량 처리율과 관련하여 TEU당 일련의 대기시간을 산정하기 위해 시뮬레이션을 실시하였다. 추산된 일련의 대기시간을 근거로 하여 각 항만의 평균대기시간과 물동량 처리율 / 하역률 간의 관계를 제시하기 위한 함수를 추정하기 위해 비선형회귀법을 적용하였다. 연구 결과는 북베트남의 컨테이너 터미널간의 경쟁상황에 관한 후속 연구에서 게임이론을 적용하는 데 이용될 수 있을 것 이다.

This study aims to suggest the methodology to improve to estimate back-calculated fish growth parameters using weighted average. It is to contribute to correct errors in the calculation of back-calculated growth equation with unequal numbers of sample by age. If the numbers of sample were evenly collected by age, each back-calculated length at age was equal between arithmetic and weighted averages. However, most samples cannot be evenly collected by age in reality because of different catchability by fishing gear and limitation of environment condition. Therefore, the estimation of back-calculated length by weighted average method is essential to calculate growth parameters. There were some published growth equations from back-calculated length using a simple arithmetic average with different numbers of samples by age when searching for back-calculated growth equations from 91 relevant papers. In this study, the process of deriving growth equation was investigated and two different average calculations were applied to a fish growth equation, for example of Acheilognathus signifer. Growth parameters, such as L∞, k and t0, were estimated from two different back-calculated averages and the growth equations were compared with growth performance index. Based on the correction of back-calculated length using weighted average by age, the changes by female and male were -14.19% and -5.23% for L∞, and 59.28% and 18.91% for k, respectively. The corrected growth performance index by weighted average improved at 7.05% and 2.46% by female and male, respectively, compared to the arithmetic averages.

The purpose of this study was to investigate the effects of hypobarichypoxic training program on competitive performance. This was done by observing their conditioning and measuring their blood constituents before and after a multi-staged intermittent training program, over 2 weeks. Three national handicapped cyclists were placed in a multi-leveled hypobaric-hypoxic (flat–4000 meter (m) high elevation) environment with consistent temperature and humidity (23 ± 2℃, 50 ± 5%) for 2 weeks. After the training, the blood constituents and average heart rate (HR) were measured and the following results were obtained. In all three athletes, there were no unique changes in red blood cell count, hemoglobin, and hematocrit, while there was a rise in the reticulocyte count. Observations of the difference in average HR during exercise at varying altitudes showed that athlete A had an average increase in the HR for the first 5 days at 2000 m. For athlete B, the comparison of the first and last training sessions at an altitude of 2000 m showed an HR increase of approximately 17%. For athlete C, there was a steady increase in the HR until day 7 of the training. As such, hypobarichypoxic training suggested that improvement of aerobic exercise performance in these athletes and it is recommended that there be a development for future training programs at high altitude, geared towards handicapped athletes of various disciplines.

The use of language learning strategies has been linked to effective EFL learning. However, while some researchers have suggested that good language learners use more strategies and more sophisticated strategies than less successful learners, others have disputed the unconditional nature of this view with the suggestion that factors such as task demands may affect the relationship between learner proficiency and strategy use. To examine the connection between language learning and learning strategy use the study examines the use of language learning strategies by 48 Korean university students from elementary school to university. In addition, emotional intelligence is investigated with regard to its impact on strategy use. The results bolster claims that associate greater and more sophisticated strategy use with more successful learners. In addition, the results highlight the importance of encouraging learning strategy use at early educational levels and the influence of emotional intelligence on the use of particular strategy types.

We investigated the changes in the physicochemical properties of wheat grains during ripening stage to determine the effect of the rise in average temperature on that of wheat grains. The treated average temperatures were 18.3°C(control), 19.9°C(1.6°C increase), 21.5°C(3.2°C increase) in artificial climate room from heading time to harvest. Results showed that the ripening period from heading to maturity tended to be shorter during higher temperature treatment condition. The 1,000-grain weight, grain width, number of florets per spike, and number of grains per spike decreased as the ripening period was shortened. Gelatinization properties were affected by high temperature due to the reduction of starch and amylose contents. As the grain filling period was shortened by high temperature treatments, the crude protein content increased. As the grain filling period was shortened by 6 days, the starch and amylose contents decreased by 10.8% and 5.4%, respectively. However, the crude protein content increased by 1.7% in such a condition. Starch content showed positive correlations between amylose and breakdown. Meanwhile, it showed negative correlations between electric conductivity of leaching water from seeds, crude protein content, peak viscosity, trough viscosity, final viscosity, and setback.