The heat transfer characteristics of double-pipe spiral heat exchanger were investigated by various curvature sizes, experimentally. The three different sizes of heat exchanger were made and tested with water as a working fluid to analyze the heat transfer characteristics. The heat transfer rates, overall heat transfer coefficient and pressure drop were analyzed with various heat exchanger sizes (i.e., curvature ratios). As result, the heat transfer rate increased with increasing the size of the heat exchanger as the flow rate increased due to increasing the area size of heat transfer. However, the overall heat transfer coefficient and pressure drop increased with decreasing the heat exchanger size (i.e., increased curvature ratio) due to the enhanced centrifugal force and inertia.

In this study, we examined the effect of orifice diameter on atomization performance such as SMD(Sauter Mean Diameter), MMD(Mass median diameter), particle size distribution, spray distance, and spray angle when water was sprayed through a siphon nozzle. In addition, the behavior characteristics of spray were analyzed using the CFD(Computational Fluid Dynamics) commercial program. In the downstream direction of the flow, the dispersion and diffusion power of the droplets increased, greatly improving atomization performance. The spray spread in the radial direction when the jet velocity of water increased. As a result, atomization performance improved as the jet velocity increased.

Since ships are exposed to noise and vibration for a long time in seas isolated from land, the stress of workers is high, requiring studies on the improvement of the problem. In addition, the health of crew members on fishing vessels, unlike commercial ships, carrying out fishing activities is closely related to fishing performance. However, considering that most of IMO's guidelines apply to merchant ships, provisions should be made for vibration in accommodation areas of fishing vessels. Accordingly, this study, applying the revised ISO 20283-5:2016 standard and through experiment, investigated the vibration characteristics of the accommodation area for each operating conditions of a 1000-ton trawler fishing vessel. Within the scope of the study and the full-ahead mode, the vibration was highest in the engine control room (4.17mm/s) while the acceptable standard was satisfied sufficiently in all conditions. Application of the merchant vessel vibration standard to fishing vessel is expected to improve the working environment of fishing vessel crew members.

The tribology characteristics of the graphene coated PA6 were evaluated with scratch experiments. As a result, the following conclusions were obtained. The PA6 of the graphene coating shows a 0.1 improvement in friction coefficient and a lower abrasion depth than PA6 in the variable pressure-type scratch experiments. PA6 of the graphene coating showed a lower friction coefficient of 0.2 or more than PA6 in the friction coefficient in the static pressure scratch experiments, indicating that wear resistance was improved. In both the variable and the static pressure type scratch experiments, the tip depth of graphene-coated PA6 shows a thinner wear depth than PA6, showing the effect of graphene. The graphene content showed excellent tribology characteristics at 3%, and there was no difference in tribology characteristics at higher contents.

To understand the spatiotemporal distribution pattern of zooplankton and the environmental factors influencing zooplankton abundance in Gomso Bay, major harvesting area of Manila clam (Venerupis philippinarum) in South Korea, zooplankton sampling was conducted four times in autumn (October 2022), winter (January 2023), early spring (March 2023), and spring (May 2023). Among the environmental factors of Gomso Bay, water temperature, chlorophyll a concentration (Chl-a), dissolved oxygen (DO), and pH observed different patterns, while salinity and suspended particulate matter (SPM) showed no significant statistical differences between the survey periods. The zooplankton in Gomso Bay occurred 33, 29, 27, and 29 taxonomic groups during each respective survey period. In October 2022 and May 2023, arthropod plankton were dominated, while in January and March 2023, protozoa were primarily dominant. Among the Arthropods, copepods including Acartia hongi, Paracalanus parvus s. l., Corycaeus spp., and Oithona spp. commonly found along Korean coastal areas of the Yellow Sea, were dominated. Cluster analysis based on zooplankton abundance indicated a single community (stable condition) in each season, attributed to low dissimilarity distances, while three distinct clusters (autumn, winter-early spring, spring) between seasons indicated a highly seasonal environment in Gomso Bay.

The aim of this study was to determine the quality characteristics of bread with 2%, 4%, 6%, and 8% cuttlefish ink added. The pH of the dough decreased as the addition percentage increased, and the addition of 8% was the lowest. The pH of the bread and the fermentation expansion power of the dough decreased as the addition percentage increased. Moisture and ash content were positively correlated with the addition percentage, and the crude protein and crude ash content were negatively correlated. As the addition percentage increased, the color of the bread became darker, and the bread volume decreased. The inside and outside color of the bread also decreased as the addition percentage increased. The volume and specific volume of bread decreased as the addition percentage increased. The amino acid analysis indicated glutamic acid was the largest, free amino acid analysis pointed out aspartic acid the highest. The springiness, cohesiveness, gumminess, brittleness, and hardness of the bread were positively correlated with the addition percentage. Overall, it seems possible to develop bakery items using cuttlefish ink as a functional ingredient.

In this study, we designed and manufactured a large angular contact ball bearing (LACBB) with low deformation using JIS-SUJ2 steel and analyzed changes in its structural characteristics and chemical composition upon heat treatment. The bearing was produced by hot forging and heat treatment including a quenching and tempering (Q/T) process, and its properties were analyzed using 4 mm thick specimens. A difference in the size distribution of the carbide in the outer and inner parts of the bearing was observed and it was confirmed that large and non-uniform carbide was distributed in the inner part of the bearing. After heat treatment, the hardness value of the outer part increased from 13.4 HRC to 61 HRC and the inner part increased from 8.0 HRC to 59.7 HRC. As a result of X-ray diffraction (XRD) measurements, the volume fraction of the retained austenite contained in the outer part was calculated to be 3.5~4.8 % and the inner part was calculated to be 3.6~5.0 %. The surface chemical composition and the content of chemical bonds were quantified through X-ray photoelectron spectroscopy (XPS), and a decrease in C=C bonds and an increase in Fe-C bonds were confirmed.

This study conducted an investigation into the effects of fruit type and cultivation practices (organic and conventional) on soil characteristics and soil arthropod communities within apple, blueberry, grape, peach, and pear orchards. The collection of soil arthropod communities was achieved through the utilization of pitfall traps, with concurrent measurements taken for soil moisture content, electrical conductivity, and temperature. The findings of this study unveiled substantial impacts attributed to fruit type and cultivation practices on soil characteristics. Specifically, within organic apple orchards, discernibly higher levels of soil moisture content, electrical conductivity, and temperature were observed when compared to their conventional counterparts. The investigation into soil arthropod communities yielded a total of 1,527 individuals, classified in to five phyla and 15 orders. The range of abundance, species richness, and diversity indices varied across conventional and organic orchards. Cultivation practices were found not to exert a significant influence on soil arthropod community characteristics. However, Non-metric Multidimensional Scaling (NMDS) analysis indicated a significant differentiation in soil arthropod community structure based on cultivation practices. This study underscores the importance of considering vegetation structure and environmental characteristics that may influence soil arthropod communities comprehensively when assessing the impact of cultivation practices on soil arthropods. Furthermore, it emphasizes the need to account for both the characteristics and structure of soil arthropod communities in understanding the implications of cultivation practices on these organisms.

BaTiO3-Poly vinylidene fluoride (PVDF) solution was prepared by adding 0~25 wt% BaTiO3 nanopowder and 10 wt% PVDF powder in solvent. BaTiO3-PVDF film was fabricated by spreading the solution on a glass with a doctor blade. The output performance increased with increasing BaTiO3 concentration. When the BaTiO3 concentration was 20 wt%, the output voltage and current were 4.98 V and 1.03 μA at an applied force of 100 N. However, they decreased when the over 20 wt% BaTiO3 powder was added, due to the aggregation of particles. To enhance the output performance, the generator was poled with an electric field of 150~250 kV/cm at 100 °C for 12 h. The output performance increased with increasing electric field. The output voltage and current were 7.87 V and 2.5 μA when poled with a 200 kV/cm electric field. This result seems likely to be caused by the c-axis alignment of the BaTiO3 after poling treatment. XRD patterns of the poled BaTiO3-PVDF films showed that the intensity of the (002) peak increased under high electric field. However, when the generator was poled with 250 kV/cm, the output performance of the generator degraded due to breakdown of the BaTiO3-PVDF film. When the generator was matched with 800 Ω resistance, the power density of the generator reached 1.74 mW/m2. The generator was able to charge a 10 μF capacitor up to 1.11 V and turn on 10 red LEDs.

This research aimed to examine the effects of grapefruit seed extract (GSE) at various concentrations on the microbial safety and physicochemical characteristics of onion puree (0.01~0.1%). The onion puree was kept at 4℃ for 14 days. The results of the study indicated that the addition of GSE did not cause any significant changes in the sample’s brix degree and viscosity in onion puree (p<0.05). However, as the concentration of GSE increased, the pH level decreased. On the other hand, as GSE was added, the lightness of the onion puree increased, while the redness and yellowness decreased. Compared to pure onion puree, the GSE-incorporated onion puree had higher levels of total flavonoid and total polyphenol content, indicating that it helps to maintain antioxidant activities. Based on the microbial safety test, aerobic bacteria, yeast, and mold were absent until day 14 of storage. In conclusion, the study suggests that the addition of GSE to onion puree increases its antioxidant activity and shelf-life.

This study explored a method to enhance the drying process usability of local mangoes by producing foam-mat dried powder under varying drying temperatures (50, 60, 70°C) and foam thicknesses (3, 6, 9 mm). The drying process period ranged from 60 to 390 minutes based on the set conditions, with higher temperatures and thinner foams accelerating drying. Powder chromaticity (L*, a*, and b*) demonstrated a declining trend with increasing drying temperature and foam thickness, exhibiting notable variance in chroma values. The water absorption index varied significantly, between 3.08 to 4.24, under different drying conditions, although the water solubility index remained consistent across foam-dried samples. Powder moisture content ranged from 2.53% to 3.83%, with hygroscopicity escalating with temperature and foam thickness. Vitamin C structure was compromised during the hot air drying process, especially at temperatures above 60°C. Electronic nose analysis distinguished foam-dried powder from freeze-dried powder; however, a thicker foam yielded a scent profile closer to that of freeze-dried powder. The findings provide fundamental data on mango foam drying, which is expected to improve processing and storage tech for local mangoes.

In this study, quality properties of rapeseed oil by different roasting temperatures (140, 160, 180, and 200℃) were investigated. Roasted-pressed oil (RPO) showed a decrease in lightness and an increase in redness and yellowness with an increase in temperature compared to cold-pressed oil (CPO). In addition, the β-carotene and tocopherol content also increased in RPO as the roasting temperature increased. The tocopherol content increased by 18~20% in RPO at 200℃ compared to CPO. This increase in bioactive components led to improved radical scavenging activity dependent on roasting temperature, and RPO at 200°C showed a 2.7-fold improvement compared to CPO. Finally, it was observed that higher roasting temperatures resulted in an extended oxidation induction period, increasing by up to 3.3 times. In conclusion, roasting is an effective method for enhancing the oil functionality of domestic rapeseed varieties. This study provides basic data for producing high-quality oil.

This study investigated the quality characteristics and antioxidant activities of salad dressing prepared with Jerusalem artichoke powder (0%, 4%, 8%, and 12%). The pH, soluble solid content, and viscosity increased as the content of Jerusalem artichoke powder increased. The titratable acidity showed no significant differences between samples. The lightness values decreased, while the redness and yellowness values increased with increasing amounts of Jerusalem artichoke powder. The total polyphenol content ranged from 52.00-69.64 μg GAE/g, and increased with the increase in Jerusalem artichoke powder levels. The antioxidant activities measured via DPPH and ABTS radical scavenging activity and reducing power also increased with increasing Jerusalem artichoke powder, at a higher rate than in the control. These results suggest that it is beneficial to add Jerusalem artichoke powder when in salad dressing.

This study investigated the quality characteristics of convenient chicken porridge prepared with fresh ginseng powder (FGP). The porridge made with the addition of FGP showed significantly higher or similar pH at 5.99-6.13 compared to porridge made without adding FGP. The convenient chicken porridge with FGP had lower viscosity and higher spreadability than the control group (p<0.05). This porridge exhibited higher lightness (L) and yellowness (b) values but a lower redness (a) value than the control group (p<0.05). The porridge made with the addition of 0.4% blanched FGP (BG0.4) displayed higher total polyphenol content, 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging activities than the other types of chicken porridge (all p<0.05). The porridge with the addition of FGP showed weaker “rice grain size”, “glossiness”, “appearance cohesiveness”, “cooked rice aroma”, “sweet taste”, “texture cohesiveness”, “thickness”, and “stickiness” than the control group (all p<0.05). The appearance and flavor acceptance were significantly higher or similar for the porridge samples made with the addition of 0.2% non-blanched FGP (NBG0.2) and 0.4% non-blanched FGP (NBG0.4) when compared with those of the control group.

This study investigated the effects of pectinase treatment and skin contact time on the quality characteristics of Dae-hong peach wine. Wine was produced with variations in enzyme treatment and skin contact time (1 hour, 2 hours, 1 day, 2 days, and until the completion of fermentation). Enzyme treatment increased the production yield by 6%, as well as ethanol and redness levels, compared to the non-treated control. Volatile components were higher when the skin contact time was 2 hours or 1 day. Results were compared according to enzyme treatment and skin contact time and found to be influenced by methanol and 3-methyl-1-butanol. Enzyme treatment effectively enhanced yields and volatile compound contents. However, skin contact should be concluded a day before 1 day to ensure compliance with methanol legislative requirements. Therefore, our findings show that enzymatic treatment with shorter skin contact time preserves the distinctive characteristics of Dae-hong peaches and ensures the production of safe and flavorful wine.

This study measured soil respiration in pine forests dominated by Pinus densiflora in Mt. Jeombong, Mt. Namsan, Mt. Jirisan in Republic of Korea from 2009 to 2010. The seasonal variations, along with temperature and soil moisture content, were measured to understand the characteristics at each site. Soil respiration was highest in summer and autumn, closely influenced by the increase in soil temperature. Throughout the measurement period, soil respiration ranged from 205.6 to 312.2 mg CO2 m-2 h-1, with Mt. Namsan showing the highest values and Mt. Jirisan the lowest. A strong correlation was observed between soil respiration and soil temperature, with Q10 values ranging from 2.5 to 3.0. Precipitation significantly affected soil moisture content, and although it appeared to influence soil respiration, no significant correlation was found.

This study investigated quality characteristics and antioxidant activity of beetroots after blanching. Beetroots were blanched in distilled water, 2% NaCl water, and 2% citric acid water at 100°C for 3 minutes (the blanched group). The moisture content was highest in the control (CON) at 91.30% (p<0.05), and cooking loss was lowest in the water-blanched beetroot (BW) at 5.39% (p<0.01). Chromaticity decreased after blanching compared to CON (p<0.001). Total polyphenol contents (TPC) and total flavonoid contents (TFC) decreased after blanching, and as a result of comparing the True retention (TR) of the blanching treatment group, BW had the highest with TPC TR 91.22% and TFC TR 70.51%. DPPH and ABTS+ radical scavenging activities were highest in the CON, and in the blanching group BW was highest scavenging activity. The total number of microorganisms in the CON group was 2.97 log CFU/g, whereas no microorganisms were detected in the blanched groups. Therefore, this study, blanching in water without additives is the most appropriate method for preserving physiologically active substances and nutrients in beetroots and inhibiting microbial growth.

본 연구에서는 고투과성 및 높은 염 제거율을 가지는 역삼투막의 성능향상을 위하여 다양한 첨가제 및 계면중합 시 경화 온도 및 시간에 따른 특성평가에 대한 연구가 수행되었다. 첨가제가 없는 막과 첨가제를 첨가한 막의 모폴로지는 모 두 “ridge-and-valley” 구조를 나타내어, 폴리아미드 층이 다공성 지지층 표면에 성공적으로 중합되었음을 확인하였다. 또한 2-Ethyl-1,3-hexanediol (EHD) 첨가함으로써 향상된 친수성과 수투과율 가졌으며, 이는 접촉각 측정을 통해서 확인되었다. 최 종적으로 97.78%와 98.7%의 NaCl 및 MgSO4 제거율과 3.31 L/(m2⋅h⋅bar)의 높은 수투과율을 가진 고투과성 계면중합막을 제조하였다.

We determined physicochemical characteristics and antioxidant activities of cookies prepared by replacing wheat flour with 0, 3, 6, and 9% freeze-dried burdock powder instead of wheat flour. The leavening and loss rates of the cookies decreased in proportion to the amount of burdock powder added to the dough. The moisture content of the cookies increased in proportion to the amount of burdock powder added and the crude protein and hardness were higher in the burdock-added group compared to the control. The lightness and yellowness of the cookies decreased, and the redness increased in proportion to the amount of burdock powder added. The total flavonoid and polyphenol compounds in the cookies increased in proportion to the amounts of burdock powder added. The antioxidant activities also tended to increase in proportion to the amount of burdock powder added. Based on the above results, adding burdock powder to cookies can increase antioxidant activity by increasing the content of antioxidant components, such as polyphenols and flavonoids. In addition, it is believed that adding burdock powder at levels of 3 to 9% of the weight of flour would result in cookies with spreadability, swelling power, and hardness similar to those of regular cookies.

This study investigated quality characteristics and functionality of rose sparkling wine that were manufactured by secondary fermentation after inoculation of yeast strains. The pH of the samples ranged from 3.96 to 4.05 and total acidity ranged from 0.23 to 0.32%. The alcohol contents of wines ranged from 6.4 to 6.6% and the CO2 pressure ranged from 2.0 to 2.6 bar. The brightness of rose wines ranged from 84.72 to 87.36, the redness from 9.28 to 14.15, and the yellowness from 9.50 to 19.20. The hue value of wines ranged from 1.137 to 1.513 and color intensity ranged from 0.724 to 0.882. Aroma analysis identified 14 alcohols, 22 esters, 4 ketones, 4 acids, and 17 miscellaneous compounds. The total tannin contents and total polyphenol contents of wines were 11.28~12.43 mg% and 24.79~28.20 mg%, respectively. The DPPH radical scavenging activity of wines ranged 63.33 to 67.89% and the ABTS radical scavenging activity of wines 82.16~86.06%. The results of this study provide a basis for establishing the brewing process of rose sparkling wines yeast strains.